Safety valve for pneumatic bimanual control

Safety valve for pneumatic bimanual control

Safety valve for pneumatic bimanual control

Safety valve for pneumatic bimanual control

Safety valve for pneumatic bimanual control

Safety valve for pneumatic bimanual control

Safety valve for pneumatic bimanual control

Safety valve for pneumatic bimanual control

Safety valve for pneumatic bimanual control

€140.18 Tax included

€115.85 tax excl.

Safety valve for pneumatic bimanual control.

Reference: W3605000001

Logotipo Metal Work

Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

No queries yet, leave the first!

Description
Frequently questions

This bimanual control block emits an output signal when the two synchronized input signals are present, i.e. the two have to arrive with a difference of no more than 0.4 sec. The output signal disappears as soon as any of the input signals disappear.

Fastening can be done by means of screws to the valve or by DIN rail.

Technical features:

Valve type: synchronized "Y" logic function.
Type of fittings: Quick connect 4 .
Maximum time synchronization between the two input signals: 0.4 sec.
Closing time: less than 0.05 sec.
Drive: pneumatic.
Working pressure: 2.5.. 8
Working temperature: -10.. 60o.
Mounting position: In any position.
Standard: EN574 type IIIA. T-V A/MHF/MG/13-05260. CE marking.

Material for professional use, install respecting the regulations in force in the place of installation.

Para ampliar la información puede descargar la ficha técnica pulsando sobre la pestaña "Adjuntos"

Questions

Be the first to ask a question about this product!

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

Responsible: ADAJUSA (CONSTRUCCIONES PBR, S.L.), purpose: Respond to requests for information, legitimacy: consent of the interested party, recipients: data will not be communicated to third parties, rights: Access, rectify and delete data, as well as other rights, as explained in the additional information. (read)

You might also like

Limit Switch tyre 3/2 NC...

Limit Switch tyre 3/2 NC... 2

Pneumatic Limit switchs

Limit Switch tyre 3/2 NC rear fittings diameter 4 - Metal Work

€16.95 (€14.01 tax excl.)

limit switch pneumatic with pushbutton drive, fittings (axial connections) located at the rear for 4 mm outer diameter tube. The valve type of the limit switch is normally closed (NC). Reference: W3501000100 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Metal wall-passing fitting - Metal Work

Wall fittings

Bulkhead fitting 4 metal - Metal Work

€3.71 (€3.07 tax excl.)

Racor metal wall passage for tube Ø4, straight and instantaneous connections, made of nickel-plated brass, for pneumatic and vacuum applications. M12x1 threaded body with nuts included in supply.Reference: 2L11001 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Limit Switch tyre 3/2 NO...

Pneumatic Limit switchs

Limit Switch tyre 3/2 NO side fittings diameter 4 - Metal Work

€20.07 (€16.59 tax excl.)

limit switch pneumatic with push-button drive, fittings located on the side for outer diameter tube of 4 mm. The valve type of the limit switch is normally open (NA). Reference: W3501001100 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Adapter for pushbutton valve or selector - Metal Work - adajusa.es

Pushbuttons and pneumatic actuators

Adapter for push-button valve or selector - Metal Work

€2.49 (€2.06 tax excl.)

Adapter for placing valves (W3501000100, W3501000101, W3501001100 or W3501001101) on pushbuttons - selectors (W0351000011, W0351000014 or W0351000031) Reference: 0351000050 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Pushbutton for pneumatic valve - Metal Work - adajusa.es

Pushbuttons and pneumatic actuators

Pushbutton for pneumatic valve - Metal Work

€10.77 (€8.90 tax excl.)

Monostable protected pushbutton with red and black discReference: W0351000011 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pneumatic emergency...

Pushbuttons and pneumatic actuators

Pneumatic emergency mushroom-head button - Metal Work

€25.31 (€20.92 tax excl.)

Pneumatic emergency stop button, drill diameter 22.5mm. With valve adapter.Reference: W0351000014 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

10 other products in the same category:

Threaded circuit selector valve 1/4

Logic valves and special valves

Valve 1/4 thread circuit selector - Metal Work

€13.42 (€11.09 tax excl.)

Circuit selector valve, with 1/4" thread. Reference: W3603000002 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Pneumatic logic valve OR...

Logic valves and special valves

Pneumatic logic valve OR function 1/8 - Aignep

€16.71 (€13.81 tax excl.)

Pneumatic logic valve "OR" function with built-in quick fittings for 1/8 diameter tube Series: Function Reference: 8870 1/8 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Pneumatic logic valve function YES Metal Work - ADAJUSA

Logic valves and special valves

Pneumatic logic valve function YES - Metal Work

€29.40 (€24.30 tax excl.)

Pneumatic logic valve function "YES" with built-in quick fittings for 4mm diameter tube.Reference: W3604000004 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Pneumatic logic valve function O Metal Work - ADAJUSA

Pneumatic logic valve function O Metal Work - ADAJUSA 2

Logic valves and special valves

Pneumatic logic valve function OR - Metal Work

€16.79 (€13.88 tax excl.)

Pneumatic logic valve function "OR" with built-in quick fittings for 4mm diameter tube.Reference: W3604000001 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Pneumatic logic valve AND...

Logic valves and special valves

Pneumatic logic valve AND function 1/8 - Aignep

€17.01 (€14.06 tax excl.)

Pneumatic logic valve "AND" function with built-in quick fittings for 1/8 diameter tube. Series: Function Reference: 8872 1/8 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Auxiliary valve logical memory - Metal Work - ADAJUSA

Auxiliary valve logical memory - Metal Work - ADAJUSA 2

Logic valves and special valves

Auxiliary valve logical memory - Metal Work

€49.55 (€40.95 tax excl.)

Logical element - MEMORY. Pipe blocking system by means of recessed fittings Ø 4. Reference: W360400005 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Valve 1/8 thread circuit selector - Metal Work - adajusa.es

Logic valves and special valves

Valve 1/8 thread circuit selector - Metal Work

€13.04 (€10.78 tax excl.)

Circuit selector valve, with 1/8" thread.Reference: W3603000001 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Pneumatic logic valve function "Y"

Logic valves and special valves

Pneumatic logic valve function AND - Metal Work

€18.30 (€15.12 tax excl.)

Pneumatic logic valve function "AND" with built-in quick fittings for 4mm diameter tube. Reference: W3604000002 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Pneumatic logic valve function NO Metal Work - ADAJUSA

Logic valves and special valves

Pneumatic logic valve function NO - Metal Work

€27.90 (€23.06 tax excl.)

Pneumatic logic valve function "NOT" with built-in quick fittings for 4mm diameter tube.Reference: W3604000003 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Tire timer

Tire timer 2

Logic valves and special valves

Pneumatic timer - Metal Work

€123.42 (€102.00 tax excl.)

Pneumatic timer, with a regulation range between 0 and 30 seconds. Quick connect fittings integrated into the 4mm diameter timer body.Reference: W3604000006 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Customers who bought this product also bought:

Step valve (cut) 3/8 female 3-way

Step valve (cut) 3/8 female 3-way 2

Cutting and unloading valves

Valve cutting step 3/8 female 3-way - Metal Work

€13.50 (€11.16 tax excl.)

3/8 female step valve (cut),discharged (3-way). Reference: W0970050003Representative image for illustrative purposes, the article supplied shall correspond to the specifications indicated.

TRMS FP2 PROMAX / ADAJUSA digital multimeter

TRMS FP2 PROMAX / ADAJUSA digital multimeter 2

Measuring instruments

DIGITAL Multimeter FP2 TRMS - PROMAX

€48.40 (€40.00 tax excl.)

FP-2 digital multimeter of PROMAX designed to accompany the student of professional training both during the apprenticeship and in his subsequent working life. Ideal also for professionals and electrical installers, the FP-2 digital multimeter includes a flashlight and an extra-large backlit LCD display. Reference: FP-2

Muffler 1/8 male MWSFE - ADAJUSA

Muffler 1/8 male MWSFE - ADAJUSA 2

Pneumatic silencers

SFE series 1/8 male Muffler

€0.69 (€0.57 tax excl.)

Pneumatic Muffler with 1/8" BSP male thread, made of brass, and stainless steel silencer element. They help reduce the level of noise produced by the air coming out of the cylinders and pneumatic valves. It also prevents dirt from entering the elements. tires.Reference: SFE 1/8 Representative image for illustrative purposes, the item supplied will...

Signallers "4" for cables 1 to 2.5mm (Bag 100 units)

Signalling elements

Signallers 4 for cables from 1 to 2.5mm (Bag 100 units)

€2.53 (€2.09 tax excl.)

Pre-cut signallers for cables marked "4", for electrical installations, cable size from 1mm to 2.5mm. Bag of 100 units (in 5 strips of 20 numbers).Ref: 1811-4Representative image for illustrative purposes, the item supplied will correspond to the indicated

Signallers "1" for cables 1 to 2.5mm (Bag 100 units)

Signalling elements

Signallers 1 for cables from 1 to 2.5mm (Bag 100 units)

€2.53 (€2.09 tax excl.)

Pre-cut signallers for cables marked "1", for electrical installations, cable size from 1mm to 2.5mm. Bag of 100 units (in 5 strips of 20 numbers).Ref: 1811-1Representative image for illustrative purposes, the item supplied will correspond to the indicated

Signallers "+" for cables 1 to 2.5mm (Bag 100 units)

Signalling elements

Signallers + for cables from 1 to 2.5mm (Bag 100 units)

€2.53 (€2.09 tax excl.)

Pre-cut signallers for cables marked "+", for electrical installations, cable size from 1mm to 2.5mm. Bag of 100 units (in 5 strips of 20 numbers). Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Signallers "2" for cables 1 to 2.5mm (Bag 100 units)

Signalling elements

Signallers 2 for cables from 1 to 2.5mm (Bag 100 units)

€2.53 (€2.09 tax excl.)

Pre-cut signallers for cables marked "2", for electrical installations, cable size from 1mm to 2.5mm.Bag of 100 units (in 5 strips of 20 numbers).Ref: 1811-2Representative image for illustrative purposes, the item supplied will correspond to the indicated

Valve 1/8 thread circuit selector - Metal Work - adajusa.es

Logic valves and special valves

Valve 1/8 thread circuit selector - Metal Work

€13.04 (€10.78 tax excl.)

Circuit selector valve, with 1/8" thread.Reference: W3603000001 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Pneumatic logic valve function NO Metal Work - ADAJUSA

Logic valves and special valves

Pneumatic logic valve function NO - Metal Work

€27.90 (€23.06 tax excl.)

Pneumatic logic valve function "NOT" with built-in quick fittings for 4mm diameter tube.Reference: W3604000003 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Valve 1/8 quick exhaust -...

Valve 1/8 quick exhaust -... 2

Quick exhaust valves

Valve 1/8 quick exhaust - Metal Work

€8.99 (€7.43 tax excl.)

1/8" quick exhaust valve. Reference: 9101201 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Home

Product added to wishlist