Electrical accessories for pneumatic cylinders

Electrical detectors for pneumatic cylinders.

2-wire reed magnetic sensor with Metal Work cable - ADAJUSA

Pneumatic cylinder accessories

Wire magnetic reed 2 sensor with cable - Metal Work

Insertable square type sensor, magnetic detector, reed type contacts, with cable included 2 wires. Valid for mounting on ISO Metal Work and Mindman cylinders. Reference: W095414 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Magnetic sensor reed 2 wires with cable 3m - ADAJUSA

Pneumatic cylinder accessories

Magnetic reed sensor 2 wires with 3m cable

SMT2DA3M

€17.35 (€14.34 tax excl.)

Magnetic sensor, magnetic detector, contacts type "reed" 2-wire, with 5m cable included. Valid for mounting on any cylinder with standard "T" type slot, such as ISO cylinders of the brands Metal Work, Mindman or Aignep.Reference: SMT.2D Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Magnetic sensor reed 2 wires with cable 5m - ADAJUSA

Pneumatic cylinder accessories

2-wire magnetic reed sensor with 5m cable

SMT2DA5M

€21.31 (€17.61 tax excl.)

Magnetic sensor, magnetic detector, contacts type "reed" 2-wire, with 5m cable included. Valid for mounting on any cylinder with standard "T" type slot, such as ISO cylinders of the brands Metal Work, Mindman or Aignep.Reference: SMT.2D.A.5M Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pneumatic cylinder accessories

2-wire reed magnetic sensor with 2m cable - Aignep

DT01R2M

€15.78 (€13.04 tax excl.)

Magnetic sensor, magnetic detector, 2-wire "reed" type contacts, operating range 5 - 240V with 2-meter cable included . Valid for mounting on any cylinder with standard "T" type slot , such as ISO cylinders of the Metal Work , Mindman or Aignep brands ( L and X series). Series: SensorsReference: DT01R2M Representative image for illustrative purposes,...

Magnetic sensor hall PNP 3 wires with cable - ADAJUSA

Pneumatic cylinder accessories

Magnetic hall sensor PNP 3-wire with cable

SMTED

€27.39 (€22.64 tax excl.)

Magnetic sensor, magnetic detector, normally open (NO), with magnetic hall sensor and PNP transistor output, with 3-wire cable included. Cable length 3m. Valid for mounting on any cylinder with standard "T" type slot, such as ISO cylinders of the brands Metal Work, Mindman or Aignep. Part number: SMT.ED Representative image for illustrative purposes, the...

Pneumatic cylinder accessories

PNP 3-wire hall magnetic sensor with 2m cable - Aignep

DT02P2M

€25.85 (€21.36 tax excl.)

Magnetic sensor, magnetic detector, normally open (NO), with hall magnetic pickup and PNP transistor output, with 3-wire cable included, 2m long . Valid for mounting on any cylinder with standard "T" type slot , such as ISO cylinders of the Metal Work , Mindman or Aignep brands (L and X series). Series: SensorsReference: DT02P2M Representative image...

View

Magnetic hall sensor NPN 3 wires with cable - ADAJUSA

Pneumatic cylinder accessories

Magnetic hall sensor NPN 3-wire with cable

SMTEND

€27.39 (€22.64 tax excl.)

Magnetic sensor, magnetic detector, normally open (NO), with magnetic hall sensor and NPN transistor output, with 3-wire cable included. Cable length 3m. Valid for mounting on any cylinder with standard "T" type slot, such as ISO cylinders of the brands Metal Work, Mindman or Aignep. Part number: SMT.END Representative image for illustrative purposes,...

Magnetic sensor reed 2 wire connector M8 - ADAJUSA

Pneumatic cylinder accessories

Magnetic reed sensor 2-wire M8 connector

SMT2C

€23.85 (€19.71 tax excl.)

Magnetic sensor, magnetic detector, contacts 2-wire "reed" type, with 3-pin male M8 connector. This magnetic detector can work with voltages between 5 and 120Vac. Valid for mounting on any cylinder with standard "T" type slot, such as ISO cylinders of the brands Metal Work, Mindman or Aignep. Part number: SMT.2C Representative image for illustrative...

Pneumatic cylinder accessories

Magnetic reed sensor 2 wires M8 connector - Aignep

DT01RM8

€18.82 (€15.55 tax excl.)

Magnetic sensor, magnetic detector, 2-wire "reed" type contacts, operating range 5 - 240V with M8 connector 300mm long . Valid for mounting on any cylinder with standard "T" type slot , such as ISO cylinders of the Metal Work , Mindman or Aignep brands ( L and X series). Series: Sensors Reference: DT01RM8 Representative image for illustrative purposes,...

View

Magnetic sensor reed (2 wires) connector M8 - Mindman - ADAJUSA

Pneumatic cylinder accessories

Magnetic reed sensor 2 wires 240Vac connector M8

SMT2CA

€27.39 (€22.64 tax excl.)

Magnetic sensor, magnetic detector, contacts 2-wire "reed" type, with 3-pin male M8 connector. This magnetic detector can work with voltages between 5 and 240Vac. Valid for mounting on any cylinder with standard "T" type slot, such as ISO cylinders of the brands Metal Work, Mindman or Aignep.Reference: SMT.2C.A Representative image for illustrative...

Pneumatic cylinder accessories

Hall magnetic sensor PNP 3 wires M8 connector - Aignep

DT02PM8

€28.70 (€23.72 tax excl.)

Magnetic sensor, magnetic detector, normally open (NO), with hall magnetic pickup and PNP transistor output, with M8 connector 300mm long . Valid for mounting on any cylinder with standard "T" type slot , such as ISO cylinders of the Metal Work , Mindman or Aignep brands (L and X series). Series: Sensors Reference: DT02PM8 Representative image for...

Magnetic sensor hall PNP (3 wires) connector - ADAJUSA

Pneumatic cylinder accessories

Magnetic hall sensor PNP 3-wire M8 connector

SMTEC

€36.41 (€30.09 tax excl.)

Magnetic sensor, magnetic detector, normally open (NO), with magnetic hall sensor and PNP transistor output, with 3-pin male M8 connector. Valid for mounting on any cylinder with standard "T" type slot, such as ISO cylinders of the brands Metal Work, Mindman or Aignep. Valid for mounting on ISO cylinders Metal Work, Mindman and Aignep, among...

Magnetic sensor hall NPN 3 wire connector M8 - ADAJUSA

Pneumatic cylinder accessories

Magnetic hall sensor NPN 3-wire M8 connector

SMTENC

€36.41 (€30.09 tax excl.)

Magnetic sensor, magnetic detector, normally open (NO), with magnetic hall sensor and NPN transistor output, with 3-pin male M8 connector. Valid for mounting on any cylinder with standard "T" type slot, such as ISO cylinders of the brands Metal Work, Mindman or Aignep. Valid for mounting on ISO cylinders Metal Work, Mindman and Aignep, among...

2-wire reed magnetic sensor with M8 connector - Metal Work - ADAJUSA

Pneumatic cylinder accessories

Reed square magnetic sensor 2-wire with M8 connector - Metal Work

W095411

€27.99 (€23.13 tax excl.)

Magnetic sensor, magnetic detector, reed type contacts (2 wires) with M8 connector (300mm cable finished in M8 connector) Valid for mounting on ISO Metal Work and Mindman cylinders. Reference: W0952028184 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

3-Wire PNP Hall Magnetic Sensor - Metal Work - ADAJUSA

Pneumatic cylinder accessories

Wire Magnetic 3-Hall PNP with Cable - Metal Work

W095434

€26.74 (€22.10 tax excl.)

Square magnetic sensor, magnetic detector, normally open (NA), with magnetic hall collector and PNP output, with cable included 3 wires. Valid for mounting on ISO Metal Work and Mindman cylinders. Reference: W095434 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

3-Wire PNP Hall Magnetic Sensor M8 Connector - Metal Work - ADAJUSA

Pneumatic cylinder accessories

Magnetic sensor hall PNP 3-wire M8 connector - Metal Work

W095431

€35.27 (€29.15 tax excl.)

Magnetic sensor, magnetic detector, normally open (NA), with magnetic hall collector and PNP output, with M8 connector. Valid for mounting on ISO Metal Work and Mindman cylinders. Reference: W095431 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pneumatic cylinder accessories

Magnetic reed sensor 2 wires connector and cable - Aignep

DSM2C525

€24.39 (€20.16 tax excl.)

Reed type magnetic proximity sensor with 2-wire cable and connector included , operating range 3 - 230 V, cable length 2.5 m facilitating flexible installation. This sensor is ideal for applications requiring position monitoring in pneumatic systems, such as in industrial automation and process control. Valid for mounting on ISO cylinders of the L series...

View

Magnetic sensor reed (2 wires) with connector and cable - Metal Work

Magnetic sensor reed (2 wires) with connector and cable - Metal Work 2

Pneumatic cylinder accessories

Magnetic sensor reed 2 wires connector and cable - Metal Work

W0950000201

€34.15 (€28.22 tax excl.)

Magnetic detector sensor with cable and connector included 2 wires. Reference: W0950000201 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pneumatic cylinder accessories

Hall magnetic sensor PNP 2 wires connector and cable - Aignep

DSM3N225

€43.91 (€36.29 tax excl.)

PNP hall contact magnetic proximity sensor with 2-wire cable and connector included, operating range 3 - 30 V, cable length 2.5 m facilitating flexible installation. This sensor is ideal for applications requiring position monitoring in pneumatic systems, such as in industrial automation and process control. Valid for mounting on ISO cylinders of the L...

View

Magnetic sensor hall PNP 3-wire connector M8 ATEX - adajusa.es

Pneumatic cylinder accessories

Magnetic sensor hall PNP 3-wire connector M8 ATEX - Metal Work

W0955A9

€43.38 (€35.85 tax excl.)

Magnetic sensor, magnetic detector, normally open (NA), with magnetic collector hall and PNP output, with M8 ATEX connector Reference: W0955A9 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

View

Showing 1-20 of 44 item(s)

Electrical accessories for pneumatic cylinders

Wire magnetic reed 2 sensor with cable - Metal Work

Magnetic reed sensor 2 wires with 3m cable

2-wire magnetic reed sensor with 5m cable

2-wire reed magnetic sensor with 2m cable - Aignep

Magnetic hall sensor PNP 3-wire with cable

PNP 3-wire hall magnetic sensor with 2m cable - Aignep

Magnetic hall sensor NPN 3-wire with cable

Magnetic reed sensor 2-wire M8 connector

Magnetic reed sensor 2 wires M8 connector - Aignep

Magnetic reed sensor 2 wires 240Vac connector M8

Hall magnetic sensor PNP 3 wires M8 connector - Aignep

Magnetic hall sensor PNP 3-wire M8 connector

Magnetic hall sensor NPN 3-wire M8 connector

Reed square magnetic sensor 2-wire with M8 connector - Metal Work

Wire Magnetic 3-Hall PNP with Cable - Metal Work

Magnetic sensor hall PNP 3-wire M8 connector - Metal Work

Magnetic reed sensor 2 wires connector and cable - Aignep

Magnetic sensor reed 2 wires connector and cable - Metal Work

Hall magnetic sensor PNP 2 wires connector and cable - Aignep

Magnetic sensor hall PNP 3-wire connector M8 ATEX - Metal Work

Client support

Company information

Your Account

Follow us in our social