List of products by brand Metal Work

Metal Work is an Italian company that specializes in the production of pneumatic components for automation systems. Created in 1967, Metal Work began as a small workshop manufacturing pressure accessories for compressed air systems. Since then, the company has gradually expanded its production structure and range to become a market leader in pneumatic accessories for automation systems.

1
…
10
11
12
…
112

Pneumatic pedal 3/2 diameter 4 mm bistable with Metal Work protection - ADAJUSA

Pneumatic pedal 3/2 diameter 4 mm bistable with Metal Work protection - ADAJUSA 2

Pushbuttons and pneumatic actuators

Pneumatic pedal 3/2 diameter M5 bistable with protection - Metal Work

€56.25 (€46.49 tax excl.)

Pneumatic pedal with 3-way M5 diameter thread with protective cover in high-strength plastic material, bistable operation, the pneumatic valve is operated while the pedal remains pressed returning to the resting position when it stops operating.Reference: W3120000331 Representative image for illustrative purposes, the item supplied will correspond...

View

Limit Switch pneumatic 3/2...

Pneumatic Limit switchs

Limit Switch pneumatic 3/2 NC one-way cam diameter M5 side fittings - Metal Work

€22.18 (€18.33 tax excl.)

Limit Switch pneumatic with unidirectional cam drive, fittings located on the side, for M5 outer diameter tube. The valve type of the limit switch is normally closed (NC). Reference: W3501001311 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

View

1/8 3-way monostable solenoid valve 24Vac - Metal Work - ADAJUSA

1/8 3-way monostable solenoid valve 24Vac - Metal Work - ADAJUSA 2

Pack

Solenoid valves 1/8

Solenoid valve 1/8 3-way monostable 24Vac - Metal Work

€62.04 (€51.27 tax excl.)

Electrovalve 1/8 3-way monostable normally closed (NC), with coil at 24 Vac and connector 22 mm Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

1/4 3/2-way "L" valve with pneumatic rotary actuator

1/4 3/2-way "L" valve with pneumatic rotary actuator 2

Valves with pneumatic actuators

1/2 3/2-way L-valve with pneumatic rotary actuator - Metal Work

€180.64 (€149.29 tax excl.)

Valve of 1/2" dial, 3 ways 2 positions, 3/2, with configuration in "L", with double effect pneumatic rotary actuator. For control of air, gases or non-corrosive and non-flammable fluids. Valve body in nickel-plated brass. The valve has a manual activation control. Valves with ATEX certification. Reference: VB3L2LB015032D / W0900300123...

View

Straight fittings

Racor straight female 1/4 tube 10mm - Metal Work

€3.16 (€2.61 tax excl.)

1/4 automatic female straight fitting for tube 10mm. Representative image for illustrative purposes, the article supplied will correspond to the indicated specifications.

Cylinder 20x125 double effect - Metal Work - adajusa.es

Cylinder 20x125 double effect - Metal Work - adajusa.es 2

Pneumatic cylinders Ø20

Pneumatic cylinder 20x125 double-acting - Metal Work

€45.21 (€37.36 tax excl.)

Pneumatic cylinder Ø20x125 double acting magnetic cylinder with elastic cushioning. According to ISO 6432 standard, liner in pressed stainless steel. Chrome-plated steel piston rod. Part number: 1120200125CN Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

View

Metal filter group (Filter + Lubricator) Metal Work - ADAJUSA

Metal filter group (Filter + Lubricator) Metal Work - ADAJUSA 2

Filter groups 1/4

Pneumatic filter group 1/4 regulation 0-12 bar semi-automatic purge serie New Deal -...

€85.89 (€70.98 tax excl.)

1/4 filter group, 1/4 maintenance unit for pneumatic applications, semi-automatic drain, compact size in 2 modules (FR+L), regulation range 0-12 kg/cm2. Very high resistance in any type of environment, made of aluminum and plastic tanks with metal protection. European manufacturing. Series: New Deal Reference: 1226054 Representative image for...

View

Metal filter group (Filter + Lubricator) Metal Work - ADAJUSA

Metal filter group (Filter + Lubricator) Metal Work - ADAJUSA 2

Filter groups 1/4

Pneumatic filter group 1/4 regulation 0-12 bar automatic drain series New Deal - Metal...

€103.18 (€85.27 tax excl.)

1/4 filter group, 1/4 maintenance unit for pneumatic applications, automatic drain, compact size in 2 modules (FR+L) and regulation range 0-12 kg/cm2. Filtering unit with 20 μm filter. These groups are made of aluminum and plastic tanks with metal protection. European made material.Series: New DealReference: 1226414 Representative image for...

View

Pneumatic pedal 3/2 4 mm...

Pushbuttons and pneumatic actuators

Pneumatic pedal 3/2 4 mm monostable without protection - Metal Work

€36.98 (€30.56 tax excl.)

Pneumatic pedal with 3-way thread,monostable operation, the pneumatic valve is operated while the pedal remains pressed returning to the resting position when it stops operating.Reference: W3120000401 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

1/8 3-way monostable solenoid valve 110Vac - Metal Work - ADAJUSA

1/8 3-way monostable solenoid valve 110Vac - Metal Work - ADAJUSA 2

Pack

Solenoid valves 1/8

Solenoid valve 1/8 3-way monostable 110Vac - Metal Work

€62.04 (€51.27 tax excl.)

1/8 3-way monostable solenoid valve with 110Vac coil. Normally closed (NC). Representative image for illustrative purposes, the article supplied shall correspond to the specifications indicated.

1/4 3/2-way "L" valve with pneumatic rotary actuator

1/4 3/2-way "L" valve with pneumatic rotary actuator 2

Valves with pneumatic actuators

3/4 3/2- way L-shaped valve with pneumatic rotary actuator - Metal Work

€243.17 (€200.97 tax excl.)

3/4" ball valve, 3 way 2-position, 3/2, with "L" configuration, with double-acting pneumatic rotary actuator . For control of air, gases or non-corrosive or non-flammable fluids. Valve body in nickel-plated brass. The valve has a manual activation control. Valves with ATEX certification. Reference: VB3L2LB020050D / W0900300124 Representative image for...

View

Intermediate straight fittings

Intermediate metal racor diameter 4 to 6mm - Metal Work

€2.80 (€2.31 tax excl.)

Intermediate metal straight fitting for connection of tubes diameter 4mm to diameter 6mm, for pneumatic applications. Representative image for illustrative purposes, the article supplied will correspond to the indicated specifications.

Limit Switch tyre 3/2 NC...

Pneumatic Limit switchs

Limit Switch tyre 3/2 NC side fittings diameter 4 - Metal Work

€17.73 (€14.65 tax excl.)

limit switch pneumatic with push-button drive, fittings located on the side for outer diameter tube of 4 mm. The valve type of the limit switch is normally closed (NC). Reference: W3501001101 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Cylinder 20x160 double effect - Metal Work - adajusa.es

Cylinder 20x160 double effect - Metal Work - adajusa.es 2

Pneumatic cylinders Ø20

Pneumatic cylinder 20x160 double-acting - Metal Work

€48.55 (€40.12 tax excl.)

Pneumatic cylinder Ø20x160 double magneticeffect with elastic cushioning. According to ISO 6432 standard, liner in pressed stainless steel. Chrome-plated steel piston rod.Reference: 1120200160CN Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

View

Filter + Lubricator T1 RA Syntesi - Metal Work - ADAJUSA

Filter groups of 1/4 FR-L

Pneumatic filter group 1/4 regulation 0-8 bar automatic drain Syntesi series - Metal Work

€96.87 (€80.06 tax excl.)

1/4 filter group, 1/4 maintenance unit for pneumatic applications, automatic drain, compact size (SY1) in 2 modules (FR+L) and regulation range 0-8 kg/cm2. These filter groups are made of technopolymer and nickel-plated brass with excellent resistance to corrosion. European manufacturing.Series: SynthesisReference: 5612B54L102 Representative image...

View

Unprotected monostable 3/2...

Pushbuttons and pneumatic actuators

Unprotected monostable 3/2 M5 pneumatic pedal - Metal Work

€33.71 (€27.86 tax excl.)

Pneumatic pedal with 3-way thread,monostable operation, the pneumatic valve is operated while the pedal remains pressed returning to the resting position when it stops operating.Reference: W3120000411 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Limit Switch 3/2 NC side...

Pneumatic Limit switchs

Limit Switch 3/2 NC side fittings diameter M5 - Metal Work

€17.59 (€14.54 tax excl.)

limit switch pneumatic with push button drive, fittings located on the side for outer diameter tube of M5. The valve type of the limit switch is normally closed (NC). Reference: W3501001111 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

View

1/8 3-way monostable solenoid valve 230Vac - Metal Work

1/8 3-way monostable solenoid valve 230Vac - Metal Work 2

Pack

Solenoid valves 1/8

Solenoid valve 1/8 3-way monostable 230Vac - Metal Work

€62.04 (€51.27 tax excl.)

Electrovalve 1/8 3-way monostable normally closed (NC), with coil at 230Vac and connector 22 mm Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

1/4 3/2-way "L" valve with pneumatic rotary actuator

1/4 3/2-way "L" valve with pneumatic rotary actuator 2

Valves with pneumatic actuators

L-valve 1 3/2-way with pneumatic rotary actuator - Metal Work

€295.03 (€243.83 tax excl.)

1" dial valve, 3 ways 2 positions, 3/2, with "L" configuration, with double effect pneumatic rotary actuator. For control of air, gases or non-corrosive and non-flammable fluids. Valve body in nickel-plated brass. The valve has a manual activation control. Valves with ATEX certification. Reference: VB3L2LB025050D / W0900300125 Representative...

View

Intermediate straight fittings

Intermediate metal racor diameter 8 to 10mm - Metal Work

€4.13 (€3.41 tax excl.)

Intermediate metal straight fitting for connection of tubes diameter 8mm to diameter 10mm, for pneumatic applications. Representative image for illustrative purposes, the article supplied will correspond to the indicated specifications.

Showing 201-220 of 2228 item(s)

1
…
10
11
12
…
112

Product added to wishlist