1/4 3/2-way "L" valve with pneumatic rotary actuator
1/4 3/2-way "L" valve with pneumatic rotary actuator
1/4 3/2-way "L" valve with pneumatic rotary actuator
1/4 3/2-way "L" valve with pneumatic rotary actuator
1/4 3/2-way "L" valve with pneumatic rotary actuator
1/4 3/2-way "L" valve with pneumatic rotary actuator

Stainless steel T-valve 3/4 3/2-way with pneumatic rotary actuator - Metal Work

€248.16 Tax included

€205.09 tax excl.

3/4" valve in stainless steel dial, 3 ways 2 positions, 3/2, with configuration in "T", with double effect pneumatic rotary actuator. For control of air, gases or non-corrosive and non-flammable fluids. Valve made of stainless steel.

The valve has a manual activation control.

Valves with ATEX certification.

Reference: VB3T2IA020050D

Simbolo neumatico actuador con valvula doble efectoPictograma ATEX

Logotipo metal work


Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

No queries yet, leave the first!
Privacy
Shipments
Returns
 

Valve of 3/4" of sphere, 3 ways 2 positions, 3/2, made of stainless steel, with configuration and the valve in "T", with pneumatic rotary actuator of double effect. For control of air, water, gases or non-corrosive and non-flammable fluids.

On the pneumatic actuator there is a control to be able to act the valve manually.

The configuration of the valve is in "T", in one position, the valve allows the passage from 1 to 2 or 1 to 1 remaining the 3 closed; in the other position, the passage is allowed between all the tracks.

Valves with ATEX certification.

Diagrama válvula en T de 3 Vías

Specifications:

  • Assembly Manufacturer: Metal Work
  • Manufacturer reference: VB3T2IA020050D
  • Actuator type: Ø50 double pneumatic effect.
  • Valve type: 3 ways 2 positions (3/2).
  • Valve configuration: in "T".
  • Thread Type: G 3/4" Female
  • Valve body: AISI 316 stainless steel
  • Dial: Stainless steel AISI 316
  • Joints: PTFE.
  • Nominal pressure PN: 40 bar
  • Standard: ISO 5211 (direct mounting to the actuator)
  • Temperature: -20ºC to +80ºC
  1. Dimensiones actuadores neumaticos con valvulas 3 vías

Dimensiones valvulas con actuador neumático de 3 vías

Esquema montaje válvula 3 vías en L con actuador

Material for professional use, install in compliance with the regulations in force at the place of installation.

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

Responsible: ADAJUSA (CONSTRUCCIONES PBR, S.L.), purpose: Respond to requests for information, legitimacy: consent of the interested party, recipients: data will not be communicated to third parties, rights: Access, rectify and delete data, as well as other rights, as explained in the additional information. (read)

You might also like

1/4 3/2-way "L" valve with pneumatic rotary actuator 1/4 3/2-way "L" valve with pneumatic rotary actuator 2
Valves with pneumatic actuators

3/4 3/2- way L-shaped valve with pneumatic rotary actuator - Metal Work

Metal Work
VB3L2LB020050
€247.60 (€204.63 tax excl.)
3/4" ball valve, 3 way 2-position, 3/2, with "L" configuration, with double-acting pneumatic rotary actuator . For control of air, gases or non-corrosive or non-flammable fluids. Valve body in nickel-plated brass. The valve has a manual activation control. Valves with ATEX certification. Reference: VB3L2LB020050D / W0900300124 Representative image for...
1/4 3/2-way "L" valve with pneumatic rotary actuator 1/4 3/2-way "L" valve with pneumatic rotary actuator 2
Valves with pneumatic actuators

3/4 3/2 T-way valve with pneumatic rotary actuator - Metal Work

Metal Work
VB3T2LB020050
€247.60 (€204.63 tax excl.)
Valve of 3/4" of sphere, 3 ways 2 positions, 3/2, with configuration in "T", with double effect pneumatic rotary actuator. For control of air, gases or non-corrosive and non-flammable fluids. Valve body in nickel-plated brass. The valve has a manual activation control. Valves with ATEX certification. Reference: VB3T2LB020050D / W0900300134...
1/4 3/2-way "L" valve with pneumatic rotary actuator 1/4 3/2-way "L" valve with pneumatic rotary actuator 2
Valves with pneumatic actuators

Stainless steel L-valve 3/4 3/2-way with pneumatic rotary actuator - Metal Work

Metal Work
VB3L2IA020050
€248.16 (€205.09 tax excl.)
Stainless steel valve with 3/4" dial, 3 ways 2 positions, 3/2, with "L" configuration, with double-acting pneumatic rotary actuator. For control of air, water, gases or non-corrosive and non-flammable fluids. Valve body in stainless steel. The valve has a manual activation control. Valves with ATEX certification. Reference: VB3L2IA020050D...

16 other products in the same category:

Angled seat valve 1/2 NC...
Valves with pneumatic actuators

Angled seat valve 1/2 NC actuator in technopolymer diameter 50 - Aignep

Aignep
X2Y0510500
€90.59 (€74.87 tax excl.)
Normally closed (NC) simple acting inclined seat valve with 1/2 thread. PTFE gaskets which allow it to work in a wide range of temperatures in the fluid (-10ºC to +180ºC). The actuator body is made of technopolymer and is pneumatically actuated. The valve can be installed in any mounting position, the "Y" shaped body increases flow by 30% and increases...
Angled seat valve 1 1/4 NC...
Valves with pneumatic actuators

Angled seat valve 1 1/4 NC actuator in technopolymer - Aignep

Aignep
X2YXF10800
€217.93 (€180.11 tax excl.)
Normally closed (NC) simple acting inclined seat valve with 1 1/4 thread. PTFE gaskets which allow it to work in a wide range of temperatures in the fluid (-10ºC to +180ºC). The actuator body is made of technopolymer and is pneumatically actuated. The valve can be installed in any mounting position, the "Y" shaped body increases flow by 30% and increases...
1/4 2/2-way valve with pneumatic rotary actuator 1/4 2/2-way valve with pneumatic rotary actuator 2
Valves with pneumatic actuators

Valve 2 1/2 2/2 ways with pneumatic rotary actuator - Metal Work

Metal Work
VB22LC065063D
€372.78 (€308.08 tax excl.)
Valve of 2"1/2 of sphere, 2 ways 2 positions, 2/2, with double effect pneumatic rotary actuator. For control of air, water, gases or non-corrosive and non-flammable fluids. Valve body in nickel-plated brass. The valve has a manual activation control. Valves with ATEX certification. Reference: VB22LC065063D / W0900300109 Representative image for...
1/4 2/2-way valve with pneumatic rotary actuator 1/4 2/2-way valve with pneumatic rotary actuator 2
Valves with pneumatic actuators

3/8 2/2-way valve with pneumatic rotary actuator - Metal Work

Metal Work
VB22LC010032D
€133.00 (€109.92 tax excl.)
Valve of 3/8" of sphere, 2 ways 2 positions, 2/2, with double effect pneumatic rotary actuator. For control of air, water, gases or non-corrosive and non-flammable fluids. Valve body in nickel-plated brass. The valve has a manual activation control. Valves with ATEX certification. Reference: VB22LC010032D / W0900300102 Representative image for...
Angled seat valve 1/2 NC...
Valves with pneumatic actuators

Angled seat valve 1/2 NC actuator in technopolymer diameter 40 - Aignep

Aignep
X2Y0510400
€88.03 (€72.75 tax excl.)
Normally closed (NC) simple acting inclined seat valve with 1/2 thread. PTFE gaskets which allow it to work in a wide range of temperatures in the fluid (-10ºC to +180ºC). The actuator body is made of technopolymer and is pneumatically actuated. The valve can be installed in any mounting position, the "Y" shaped body increases flow by 30% and increases...
1/4 3/2-way "L" valve with pneumatic rotary actuator 1/4 3/2-way "L" valve with pneumatic rotary actuator 2
Valves with pneumatic actuators

Valve 2 3/2-way L with pneumatic rotary actuator - Metal Work

Metal Work
VB3L2LB050063
€813.16 (€672.03 tax excl.)
Valve  2" dial , 3-way 2-position, 3/2, with "L" configuration, with double-acting pneumatic rotary actuator. For control of air, gases or non-corrosive and non-flammable fluids. Valve body in nickel-plated brass. The valve has a manual activation control. Valves with ATEX certification. Reference: VB3L2LB050063D / W0900300128 Representative...
Angled seat valve 1 NC...
Valves with pneumatic actuators

Angled seat valve 1 NC actuator in technopolymer - Aignep

Aignep
X2Y0910630
€141.01 (€116.54 tax excl.)
Normally closed (NC) simple acting inclined seat valve with 1" thread. PTFE gaskets which allow it to work in a wide range of temperatures in the fluid (-10ºC to +180ºC). The actuator body is manufactured in technopolymer and is pneumatically actuated. The valve can be installed in any mounting position, the body manufactured in the shape of a "Y"...
Compact fluid valve 2 NC...
Valves with pneumatic actuators

Compact fluid valve 2 NC with pneumatic actuator Fluxa series - Aignep

Aignep
51200
€166.88 (€137.92 tax excl.)
Compact seat valve, with simple acting pneumatic actuator , 60mm diameter, and normally closed (NC), with 2" thread. FKM joints. The actuator body is made of anodized aluminum alloy and is pneumatically actuated. The valve is manufactured in brass. Reference: 51200 Representative image for illustrative purposes, the item supplied will correspond to the...
1/4 3/2-way "L" valve with pneumatic rotary actuator 1/4 3/2-way "L" valve with pneumatic rotary actuator 2
Valves with pneumatic actuators

Stainless steel T-valve 1 3/2-way with pneumatic rotary actuator - Metal Work

Metal Work
VB3T2IA025050
€307.22 (€253.90 tax excl.)
1" valve in stainless steel dial, 3 ways 2 positions, 3/2, with configuration in "T", with double effect pneumatic rotary actuator. For control of air, gases or non-corrosive and non-flammable fluids. Valve made of stainless steel. The valve has a manual activation control. Valves with ATEX certification. Reference: VB3T2IA025050D Representative...
Compact valve for fluids 1...
Valves with pneumatic actuators

Compact valve for fluids 1 1/4 NC with pneumatic actuator Fluxa series - Aignep

Aignep
51114
€116.41 (€96.21 tax excl.)
Compact seat valve, with simple acting pneumatic actuator , 50mm diameter, and normally closed (NC), with 1" 1/4 thread. FKM gaskets. The actuator body is made of anodized aluminum alloy and is pneumatically actuated. The valve is made of brass. Reference: 51114 Representative image for illustrative purposes, the item supplied will correspond to the...
Compact valve for fluids...
Valves with pneumatic actuators

Compact valve for fluids 3/4 NC with pneumatic actuator Fluxa series - Aignep

Aignep
51034
€78.50 (€64.88 tax excl.)
Compact seat valve, with simple acting pneumatic actuator , diameter 35mm, and normally closed (NC), with 3/4 thread. Together at FKM. The actuator body is made of anodized aluminum alloy and is pneumatically actuated. The valve is made of brass.Reference: 51034 Representative image for illustrative purposes, the item supplied will correspond to the...
Angled seat valve 2 NC...
Valves with pneumatic actuators

Angled seat valve 2 NC actuator in INOX diameter 90 - Aignep

Aignep
X1YXH10900
€388.86 (€321.37 tax excl.)
Normally closed (NC) simple acting inclined seat valve with 2" thread. PTFE gaskets which allow it to work in a wide range of temperatures in the fluid (-10ºC to +180ºC). The actuator body is manufactured in AISI 304 stainless steel and is pneumatically actuated. The valve can be installed in any mounting position, the body manufactured in the shape of a...
1/4 2/2-way valve with pneumatic rotary actuator 1/4 2/2-way valve with pneumatic rotary actuator 2
Valves with pneumatic actuators

1 2/2-way valve with pneumatic rotary actuator - Metal Work

Metal Work
VB22LC025050D
€189.41 (€156.54 tax excl.)
1" dial valve, 2-way 2-position, 2/2, with double-acting pneumatic rotary actuator. For control of air, water, gases or non-corrosive and non-flammable fluids. Valve body in nickel-plated brass. The valve has a manual activation control. Valves with ATEX certification. Reference: VB22LC025050D / W0900300105 Representative image for illustrative...
Angled seat valve 2 NC...
Valves with pneumatic actuators

Angled seat valve 2 NC actuator in technopolymer - Aignep

Aignep
X2YXH10800
€282.03 (€233.08 tax excl.)
Normally closed (NC) simple acting inclined seat valve with 2" thread. PTFE gaskets which allow it to work in a wide range of temperatures in the fluid (-10ºC to +180ºC). The actuator body is manufactured in technopolymer and is pneumatically actuated. The valve can be installed in any mounting position, the body manufactured in the shape of a "Y"...
1/4 3/2-way "L" valve with pneumatic rotary actuator 1/4 3/2-way "L" valve with pneumatic rotary actuator 2
Valves with pneumatic actuators

Valve 1 1/2 3/2 L-way with pneumatic rotary actuator - Metal Work

Metal Work
VB3L2LB040063
€532.28 (€439.90 tax excl.)
Valve of 1"1/2 of sphere, 3 ways 2 positions, 3/2, with configuration in "L", with pneumatic rotary actuator of double effect. For control of air, gases or non-corrosive and non-flammable fluids. Valve body in nickel-plated brass. The valve has a manual activation control. Valves with ATEX certification. Reference: VB3L2LB040063D / W0900300127...
Home
Product added to wishlist