1/4 3/2-way "L" valve with pneumatic rotary actuator
1/4 3/2-way "L" valve with pneumatic rotary actuator
1/4 3/2-way "L" valve with pneumatic rotary actuator
1/4 3/2-way "L" valve with pneumatic rotary actuator
1/4 3/2-way "L" valve with pneumatic rotary actuator
1/4 3/2-way "L" valve with pneumatic rotary actuator

Valve 1 1/2 3/2 via stainless steel in L with pneumatic rotary actuator - Metal Work

€554.03 Tax included

€457.88 tax excl.

Stainless steel valve of 1" 1/2 dial, 3 ways 2 positions, 3/2, with configuration in "L", with double effect pneumatic rotary actuator. For control of air, water, gases or non-corrosive and non-flammable fluids. Valve body in stainless steel.

The valve has a manual activation control.

Valves with ATEX certification.

Reference: VB3L2IA040063D

Simbolo neumatico actuador con valvula doble efectoPictograma ATEX

Logotipo metal work

Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

No queries yet, leave the first!
Privacy
Shipments
Returns
 

Valve of 1" 1/2 of sphere, 3 ways 2 positions, 3/2, made of stainless steel, with configuration of the valve in "L", with pneumatic rotary actuator of double effect. For control of air, water, gases or non-corrosive and non-flammable fluids.

On the pneumatic actuator there is a control to be able to act the valve manually.

The configuration of the valve is in "L", in one position, the valve allows the passage from 1 to 2 or 2 to 1 remaining the 3 closed; in the other position, the step is allowed from 1 to 3 or from 3 to 1 remaining the 2 closed.

Valves with ATEX certification.

Diagrama válvula en L

Specifications:

  • Assembly manufacturer: Metal Work.
  • Manufacturer reference:VB3L2IA040063D
  • Actuator type: Ø63 double pneumatic effect.
  • Valve type: 3 ways 2 positions (3/2).
  • Valve configuration: in "L".
  • Thread type: G 1" 1/2 female.
  • Valve body: AISI 316 stainless steel
  • Dial: stainless steel
  • Joints: PTFE.
  • Nominal pressure PN: 40 bar
  • Standard: ISO 5211 (direct mounting to the actuator)
  • Temperature: -20ºC to +80ºC

Dimensiones actuadores neumaticos con valvulas 3 vías

Dimensiones valvulas con actuador neumático de 3 vías

Válvula en L con actuador neumático

Material for professional use, install in compliance with the regulations in force at the place of installation.

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

Responsible: ADAJUSA (CONSTRUCCIONES PBR, S.L.), purpose: Respond to requests for information, legitimacy: consent of the interested party, recipients: data will not be communicated to third parties, rights: Access, rectify and delete data, as well as other rights, as explained in the additional information. (read)

You might also like

1/4 3/2-way "L" valve with pneumatic rotary actuator 1/4 3/2-way "L" valve with pneumatic rotary actuator 2
Valves with pneumatic actuators

Valve 1 1/2 3/2 L-way with pneumatic rotary actuator - Metal Work

Metal Work
VB3L2LB040063
€532.28 (€439.90 tax excl.)
Valve of 1"1/2 of sphere, 3 ways 2 positions, 3/2, with configuration in "L", with pneumatic rotary actuator of double effect. For control of air, gases or non-corrosive and non-flammable fluids. Valve body in nickel-plated brass. The valve has a manual activation control. Valves with ATEX certification. Reference: VB3L2LB040063D / W0900300127...
1/4 3/2-way "L" valve with pneumatic rotary actuator 1/4 3/2-way "L" valve with pneumatic rotary actuator 2
Valves with pneumatic actuators

T-valve 1 1/2 3/2 way with pneumatic rotary actuator - Metal Work

Metal Work
VB3T2LB040063
€532.28 (€439.90 tax excl.)
Valve of 1" 1/2 of sphere, 3 ways 2 positions, 3/2, with configuration in "T", with pneumatic rotary actuator of double effect. For control of air, gases or non-corrosive and non-flammable fluids. Valve body in nickel-plated brass. The valve has a manual activation control. Valves with ATEX certification. Reference: VB3T2LB040063D / W0900300137...
1/4 3/2-way "L" valve with pneumatic rotary actuator 1/4 3/2-way "L" valve with pneumatic rotary actuator 2
Valves with pneumatic actuators

T-stainless steel valve 1 1/2 3/2-way with pneumatic rotary actuator

Metal Work
VB3T2IA040063
€554.03 (€457.88 tax excl.)
1 1/2" valve in stainless steel dial, 3-way 2-position, 3/2, with "T" configuration, with double-acting pneumatic rotary actuator. For control of air, gases or non-corrosive and non-flammable fluids. Valve made of stainless steel. The valve has a manual activation control. Valves with ATEX certification. Reference: VB3T2IA040063D Representative...

16 other products in the same category:

1/4 3/2-way "L" valve with pneumatic rotary actuator 1/4 3/2-way "L" valve with pneumatic rotary actuator 2
Valves with pneumatic actuators

Valve 2 3/2-way L with pneumatic rotary actuator - Metal Work

Metal Work
VB3L2LB050063
€813.16 (€672.03 tax excl.)
Valve  2" dial , 3-way 2-position, 3/2, with "L" configuration, with double-acting pneumatic rotary actuator. For control of air, gases or non-corrosive and non-flammable fluids. Valve body in nickel-plated brass. The valve has a manual activation control. Valves with ATEX certification. Reference: VB3L2LB050063D / W0900300128 Representative...
1/4 3/2-way "L" valve with pneumatic rotary actuator 1/4 3/2-way "L" valve with pneumatic rotary actuator 2
Valves with pneumatic actuators

1/2 3/2 T-way valve with pneumatic rotary actuator - Metal Work

Metal Work
B3T2LB015032D
€183.93 (€152.01 tax excl.)
Valve of 1/2" dial, 3 ways 2 positions, 3/2, with configuration in "T", with double effect pneumatic rotary actuator. For control of air, gases or non-corrosive and non-flammable fluids. Valve body in nickel-plated brass. The valve has a manual activation control. Valves with ATEX certification. Reference: VB3T2LB015032D / W0900300133...
Angled seat valve 3/4 NC...
Valves with pneumatic actuators

Angled seat valve 3/4 NC actuator in technopolymer - Aignep

Aignep
X2Y0710500
€99.99 (€82.64 tax excl.)
Normally closed (NC) simple acting inclined seat valve with 3/4 thread. PTFE gaskets which allow it to work in a wide range of temperatures in the fluid (-10ºC to +180ºC). The actuator body is made of technopolymer and is pneumatically actuated. The valve can be installed in any mounting position, the "Y" shaped body increases flow by 30% and increases...
Compact valve for fluids 1...
Valves with pneumatic actuators

Compact valve for fluids 1 1/4 NC with pneumatic actuator Fluxa series - Aignep

Aignep
51114
€116.41 (€96.21 tax excl.)
Compact seat valve, with simple acting pneumatic actuator , 50mm diameter, and normally closed (NC), with 1" 1/4 thread. FKM gaskets. The actuator body is made of anodized aluminum alloy and is pneumatically actuated. The valve is made of brass. Reference: 51114 Representative image for illustrative purposes, the item supplied will correspond to the...
1/4 3/2-way "L" valve with pneumatic rotary actuator 1/4 3/2-way "L" valve with pneumatic rotary actuator 2
Valves with pneumatic actuators

2 3/2-way T-valve with pneumatic rotary actuator - Metal Work

Metal Work
VB3T2LB050063
€813.16 (€672.03 tax excl.)
2" dial valve, 3-way 2-position, 3/2, with "T" configuration, with double-acting pneumatic rotary actuator. For control of air, gases or non-corrosive and non-flammable fluids. Valve body in nickel-plated brass. The valve has a manual activation control. Valves with ATEX certification. Reference: VB3T2LB050063D / W0900300138 Representative image...
1/4 3/2-way "L" valve with pneumatic rotary actuator 1/4 3/2-way "L" valve with pneumatic rotary actuator 2
Valves with pneumatic actuators

Valve 1/4 3/2 T-way with pneumatic rotary actuator - Metal Work

Metal Work
VB3T2LB008032
€177.22 (€146.46 tax excl.)
Valve1/4" dial , 3-way 2-position, 3/2, with "T" configuration, with double-acting pneumatic rotary actuator. For control of air, gases or non-corrosive and non-flammable fluids. Valve body in nickel-plated brass. The valve has a manual activation control. Valves with ATEX certification. Reference: VB3T2LB008032D / W0900300131 Representative...
1/4 3/2-way "L" valve with pneumatic rotary actuator 1/4 3/2-way "L" valve with pneumatic rotary actuator 2
Valves with pneumatic actuators

Valve 1 1/4 3/2 T-way with pneumatic rotary actuator - Metal Work

Metal Work
VB3T2LB032063
€406.73 (€336.14 tax excl.)
Valve of 1" 1/4 of sphere, 3 ways 2 positions, 3/2, with configuration in "T", with pneumatic rotary actuator of double effect. For control of air, gases or non-corrosive and non-flammable fluids. Valve body in nickel-plated brass. The valve has a manual activation control. Valves with ATEX certification. Reference: VB3T2LB032063D / W0900300136...
Angled seat valve 1 1/2 NC...
Valves with pneumatic actuators

Angled seat valve 1 1/2 NC actuator in technopolymer - Aignep

Aignep
X2YXG10800
€243.57 (€201.30 tax excl.)
Normally closed (NC) simple acting inclined seat valve with 1 1/2 thread. PTFE gaskets which allow it to work in a wide range of fluid temperatures (-10ºC to +180ºC). The actuator body is made of technopolymer and is pneumatically actuated. The valve can be installed in any mounting position, the "Y" shaped body increases flow by 30% and increases the...
Angled seat valve 1 1/4 NC...
Valves with pneumatic actuators

Angled seat valve 1 1/4 NC actuator in INOX diameter 63 - Aignep

Aignep
X1YXF10630
€247.84 (€204.83 tax excl.)
Normally closed (NC) simple acting inclined seat valve with 1" 1/4 thread. PTFE gaskets which allow it to work in a wide range of fluid temperatures (-10ºC to +180ºC). The actuator body It is made of AISI 304 stainless steel and is pneumatically actuated. The valve can be installed in any mounting position, the body manufactured in the shape of a "Y"...
1/4 3/2-way "L" valve with pneumatic rotary actuator 1/4 3/2-way "L" valve with pneumatic rotary actuator 2
Valves with pneumatic actuators

Stainless steel L-valve 2 3/2-way with pneumatic rotary actuator - Metal Work

Metal Work
VB3L2IA050063
€771.65 (€637.73 tax excl.)
Stainless steel valve with 2" dial, 3 ways 2 positions, 3/2, with "L" configuration, with double effect pneumatic rotary actuator. For control of air, water, gases or non-corrosive and non-flammable fluids. Valve body in stainless steel. The valve has a manual activation control. Valves with ATEX certification. Reference: VB3L2IA050063D...
Angled seat valve 1/2 NC...
Valves with pneumatic actuators

Angled seat valve 1/2 NC actuator in technopolymer diameter 40 - Aignep

Aignep
X2Y0510400
€88.03 (€72.75 tax excl.)
Normally closed (NC) simple acting inclined seat valve with 1/2 thread. PTFE gaskets which allow it to work in a wide range of temperatures in the fluid (-10ºC to +180ºC). The actuator body is made of technopolymer and is pneumatically actuated. The valve can be installed in any mounting position, the "Y" shaped body increases flow by 30% and increases...
Angled seat valve 2 NC...
Valves with pneumatic actuators

Angled seat valve 2 NC actuator in INOX diameter 63 - Aignep

Aignep
X1YXH10630
€333.31 (€275.46 tax excl.)
Normally closed (NC) simple acting inclined seat valve with 2" thread. PTFE gaskets which allow it to work in a wide range of temperatures in the fluid (-10ºC to +180ºC). The actuator body is manufactured in AISI 304 stainless steel and is pneumatically actuated. The valve can be installed in any mounting position, the body manufactured in the shape of a...
1/4 3/2-way "L" valve with pneumatic rotary actuator 1/4 3/2-way "L" valve with pneumatic rotary actuator 2
Valves with pneumatic actuators

1/2 3/2-way L-valve with pneumatic rotary actuator - Metal Work

Metal Work
VB3L2LB015032
€183.93 (€152.01 tax excl.)
Valve of 1/2" dial, 3 ways 2 positions, 3/2, with configuration in "L", with double effect pneumatic rotary actuator. For control of air, gases or non-corrosive and non-flammable fluids. Valve body in nickel-plated brass. The valve has a manual activation control. Valves with ATEX certification. Reference: VB3L2LB015032D / W0900300123...
Home
Product added to wishlist