List of products by supplier Generico-Mix

DIN Lane

Slotted DIN rail 0,5m

Slotted DIN rail for the assembly of electrical mechanisms and automatisms, manufactured in galvanized steel sheet of 1.2mm thickness. Supplied in 0.5m long strips.Reference: BS-05

Control and protection relays, thermostats, temperature probes

Compact analog thermostat closed contact

TF1M

€6.36 (€5.26 tax excl.)

Compact analog thermostat with closed contact, DIN rail mounting (1 module width), suitable for temperature regulation inside electrical cabinets and similar. Temperature range 0º - 60ºC. Very compact size and simple installation.Reference: TF1M Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

DIN Lane

Slotted DIN rail 1m

BS-1 1metro

€2.76 (€2.28 tax excl.)

Slotted DIN rail for mounting electrical mechanisms and automations, made of 1.2mm thick galvanized steel sheet. Supplied in 1m long strips. Reference: BS-1 1meter Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Thermal relay regulation 0.1 to 0.16 A 2

Thermal relays

Thermal regulation relay 0.1 to 0.16 A

MTR 0,1-0,16A

€8.66 (€7.16 tax excl.)

Three-phase thermal relay for protection of three-phase and single-phase electric motors against overloads or absence of phase. The regulation of the thermal relay is between 0.1 and 0.16 A. Reference: MTR 0.1-0.16A Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Control and protection relays, thermostats, temperature probes

Analog compact thermostat open contact

TH1M

€6.36 (€5.26 tax excl.)

Compact analogue thermostat with open contact, DIN rail mounting (1 module width), suitable for temperature regulation inside electrical cabinets and similar. Temperature range 0º - 60ºC. Very compact size and simple installation.Reference: TH1M Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

2P+T 16a power outlet mounted on din-rail

Power outlets

Power outlet mounted 2P+T 16a din-rail

DIN SD16

€3.97 (€3.28 tax excl.)

Power outlet,16 A. 2-pole plug base and grounding, schuko type for mounting on din-rail. Reference: DIN SD16Representative image for illustrative purposes, the article supplied shall correspond to the specifications indicated

10x38 cylindrical protection fuse 10x38 | ADAJUSA

Fuses and fuse holders

Ceramic protection fuse 10x38 2A at 500V

10x38 2A

€0.45 (€0.37 tax excl.)

Ceramic fuse protection of 2A Ø10X38 at 500V against short circuits and overloads of electrical equipment and slow action, mainly used in industrial areas. Reference: 10X38 2A Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Distribution cabinets for recessing

Distribution cabinet 24 modules for recessing MLS series

MLS24PD

€28.30 (€23.39 tax excl.)

Distribution box for 24 elements, flush mounting. with ergonomic opening and closing system. Smoked transparent lid. Includes terminals for grounding Reference: MLS24PDRepresentative image for illustrative purposes, the item supplied shall correspond to the specifications indicated

MCB circuit breaker auxiliary contact omu systems adajusa

Accessories for MCB circuit breakers and differential

Auxiliary contact for MCB circuit breaker - OMU

OMBAUAUX

€5.93 (€4.90 tax excl.)

Auxiliary contact for MCB circuit breaker,with 1 contact switched NA/NC, indicates the "open" or "closed" position of the MCB circuit breaker switch to which it is associated, is placed on the left side of the magnetothermic. Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Power outlets

Power outlet schuko 16A 2P+T red mount on din-rail

DIN SD16 Rojo

€3.97 (€3.28 tax excl.)

Power outlet,2-pole 16A socket base and grounding, type Schuko for mounting on din-rail. Red. Reference: DIN SD16 RedRepresentative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

cylindrical protection fuse 10x38 for electronic equipment protection|ADAJUSA

Fuses and fuse holders

Ceramic protection fuse 10x38 4A at 500V

10x38 4A

€0.45 (€0.37 tax excl.)

Ceramic fuse of protection of 4A Ø10X38 to 500V against short circuits and overloads of electrical equipment and slow action, mainly used in industrial areas. Reference: 10X38 4A Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Distribution cabinets for recessing

Distribution cabinet 36 modules for recessing MLS series

MLS36PD

€35.39 (€29.25 tax excl.)

Distribution box for 36 elements, flush mounting. with ergonomic opening and closing system. Smoked transparent lid. Includes terminals for grounding Reference: MLS36PDRepresentative image for illustrative purposes, the item supplied shall correspond to the specifications indicated

Power outlets

Schuko power socket 16A 2P+T green color DIN rail mounting

DINSD16Verde

€3.97 (€3.28 tax excl.)

Power outlet , 16A 2-pole and grounded socket, Schuko type for mounting on DIN rail. Green color. Reference: DIN SD16 Green Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Fuses and fuse holders

Ceramic protection fuse 10x38 6A at 500V

10x38 6A

€0.45 (€0.37 tax excl.)

Ceramic fuse of protection of 6A Ø10X38 to 500V against short circuits and overloads of electrical equipment and slow action, mainly used in industrial areas. Reference: 10X38 6A Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

cylindrical protection fuse 10x38 for electronic equipment|ADAJUSA

Fuses and fuse holders

Ceramic protection fuse 10x38 10A at 500V

10x38 10A

€0.45 (€0.37 tax excl.)

Ceramic fuse of protection of 10A Ø10X38 to 500V against short circuits and overloads of electrical equipment and slow action, mainly used in industrial areas. Reference: 10X38 10A Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

10x38 cylindrical fuse for electronic equipment protection|ADAJUSA

Fuses and fuse holders

Ceramic protection fuse 10x38 16a at 500V

10x38 16A

€0.45 (€0.37 tax excl.)

Ceramic fuse to protect 16a Ø10X38 at 500V against short circuits and overloads of electrical equipment and slow action, mainly used in industrial areas. reference: 10X38 16a Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

cylindrical fuse 10x38 for protection of electronic equipment|ADAJUSA

Fuses and fuse holders

Ceramic fuse for protection 20a 10x38 at 500V

10x38 20A

€0.45 (€0.37 tax excl.)

Ceramic fuse to protect 20a Ø10X38 at 500V against short circuits and overloads of electrical equipment and slow action, mainly used in industrial areas.Reference: 10X38 20aRepresentative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Thermal relays

Thermal regulation relay 0.16 to 0.25 A

MTR0,16-0,25A

€8.66 (€7.16 tax excl.)

Three-phase thermal relay for protection of three-phase and single-phase electric motors against overloads or absence of phase. The regulation of the thermal relay is between 0.16 and 0.25 A. Reference: MTR 0.16-0.25A Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Fuses and fuse holders

Ceramic fuse for protection 25a 10x38 at 500V

10x38 25A

€0.45 (€0.37 tax excl.)

Ceramic fuse to protect 25a Ø10X38 at 500V against short circuits and overloads of electrical equipment and slow action, mainly used in industrial areas. Reference: 10X38 25a Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

cylindrical fuse 10x38 for protection of electronic equipment 10x38|ADAJUSA

Fuses and fuse holders

Ceramic protection fuse 32A 10x38 at 500V

10x38 32A

€0.45 (€0.37 tax excl.)

Ceramic fuse protection of 32A Ø10X38 at 500V against short circuits and overloads of electrical equipment and slow action, mainly used in industrial areas. reference:10X38 32A Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

10x38 1-pole fuse holder for 10x38 fuse cartridges |ADAJUSA

Fuses and fuse holders

Fuse holder 1 pole 32A for 10x38mm DIN rail mount

10x38 1p

€2.03 (€1.68 tax excl.)

Fuse holder 1 pole 10x38 of electrical connection up to 32A and 690V of modular type, for cylindrical fuse cartridges of 10X38mm, protection of both circuits and electrical machinery.Reference: 10x38 1p Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated

10x38 bipolar fuse holder for electronic equipment protection|ADAJUSA

Fuses and fuse holders

Fuse holder base 2-pole 10x38 32A for DIN rail mounting

10x38 2p

€4.10 (€3.39 tax excl.)

2-pole 10x38 fuse holder with electrical connection up to 32A and 690V, for 10X38mm cylindrical fuse cartridges, and protection of both circuits and electrical machinery.Reference: 10x38 2p Representative image for illustrative purposes, the article supplied shall correspond to the specifications indicated

10x30 3 pole fuse holder for electronic equipment protection|ADAJUSA

Fuses and fuse holders

Fuse holder 3-pole 10x38 32A base for DIN rail mounting

10x38 3p

€6.67 (€5.51 tax excl.)

Fuse holder of 3 poles 10x38 of electrical connection up to 32A and 690V, for cylindrical fuse cartridges of 10X38mm, and protection of both circuits and electrical machinery.Reference: 10x38 3p Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated

Fuses and fuse holders

10x38 PV fuse for photovoltaic applications 10A at 1000VDC

10x38-1KVc10A

€2.55 (€2.11 tax excl.)

10A Ø10X38 PV ceramic fuse at 1000Vdc, designed to offer compact and safe protection of photovoltaic modules with voltages up to 1000Vdc, also providing protection against overloads and short circuits according to the requirements of standard EN 60269. Reference : 10x38 DC1000V 10A Representative image for illustrative purposes, the item supplied will...

Motor starter 0,12CV 230V three-phase with contactor | Adajusa

Motor starter 0,12CV 230V three-phase with contactor | Adajusa 2

Pack

220/230 V three-phase motor contactor starters.

Three-phase motor starter 0.12HP 230V with contactor

992ADC2200093

€30.27 (€25.02 tax excl.)

Direct starter box for three-phase motors 0.09Kw (0.12HP) 220/230 V , with thermal relay for motor protection, start stop buttons included. Reference: ADC2200093 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Thermal relays

Thermal regulation relay 0.25 to 0.40 A

MTR 0,25-0,4A

€8.66 (€7.16 tax excl.)

Three-phase thermal relay for protection of three-phase and single-phase electric motors against overloads or absence of phase. The regulation of the thermal relay is between 0.25 and 0.4 A. Reference: MTR 0.25-0.4A Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Distribution box 10 elements, surface mount

Distribution box 10 elements, surface mount 2

Power outlet boxes

Modular distribution Box with cover for 10 modules on surface IP66 ABS

ELO-10/S

€24.20 (€20.00 tax excl.)

Box for surface-mounted sockets, 290x218x120mm, made of ABS, with IP66 protection rating. The box can accommodate up to 10 17.5mm elements, surface or wall mounting. This industrial surface box can accommodate CETAC or similar type socket bases as well as protection elements, differentials and magnetothermics. Reference: ELO-10/S Representative image for...

cylindrical fuse 10x38 for protection of electronic equipment 10x38|adajusa.es

Fuses and fuse holders

Ceramic fuse 14x51 protection 10A to 500Vac

14x51 10A

€1.02 (€0.84 tax excl.)

Ceramic fuse of protection of 10A Ø14X51 to 500V against short circuits and overloads of electrical equipment and slow action, mainly used in industrial areas. Reference:14x51 10A Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Motor starter 0,16CV 230V three-phase with contactor | Adajusa

Motor starter 0,16CV 230V three-phase with contactor | Adajusa 2

Pack

220/230 V three-phase motor contactor starters.

Three-phase motor starter 0.16HP 230V with contactor

992ADC2200123

€30.27 (€25.02 tax excl.)

Direct starter box for 0.12Kw (0.16HP) 220/230 V three-phase motors , with thermal relay for motor protection, start stop buttons included. Reference: ADC2200123 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Power outlet boxes

Modular distribution Box with cover for 7 modules on surface IP66 ABS

ELO-7/S

€15.40 (€12.73 tax excl.)

Box for surface-mounted sockets, 210x140x120mm, made of ABS, with IP66 protection rating. The box can accommodate up to 7 17.5mm elements, surface or wall mounting. This industrial surface box can accommodate CETAC, Schuko or similar type socket bases as well as protection elements, differentials and magnetothermics. Reference: ELO-7/S Representative...

1-pole 10x38 fuse holder for 10x38 fuse cartridges |adajusa.es

Fuses and fuse holders

Fuse holder base 1 pole 14x51mm 63A DIN rail mount

14x51 1p

€3.16 (€2.61 tax excl.)

Fuse holder 1 pole 14x51 of electrical connection up to 63A and 690V of modular type, for cylindrical fuse cartridges of 14X51mm, protection of both circuits and electrical machinery.Part number: 14x51 1p Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated

Motor starter 0,25CV 230V three-phase with contactor | Adajusa

Motor starter 0,25CV 230V three-phase with contactor | Adajusa 2

Pack

220/230 V three-phase motor contactor starters.

Three-phase motor starter 0.25HP 230V with contactor

992ADC2200183

€30.27 (€25.02 tax excl.)

Direct starter box for 0.18Kw (0.25HP) 220/230 V three-phase motors, with thermal relay for motor protection, start stop buttons included. Reference: ADC2200183 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Power outlet boxes

Modular distribution Box with cover for 16 modules IP65 ABS halogen-free

ELO-16

€52.93 (€43.74 tax excl.)

Surface-mounted socket Box , 330x330x155mm, made of halogen-free, UV-stable ABS, with IP65 protection class. The box can accommodate up to 16 17.5mm elements, surface or wall mounting. This industrial surface box can accommodate CETAC, Schuko or similar sockets as well as protection elements, differentials and magnetothermics. The hinged cover can be...

Motor starter 0,5CV 230V three-phase with contactor | Adajusa

Motor starter 0,5CV 230V three-phase with contactor | Adajusa 2

Pack

Starters by contactor 220/230 V three-phase motors

Three-phase motor starter 0.5HP 230V with contactor

992ADC2200373

€30.27 (€25.02 tax excl.)

Direct starter box for three-phase motors 0.37Kw (0.5HP) 220/230 V , with thermal relay for motor protection, start stop buttons included. Reference: ADC2200373 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Distribution box 32 elements, surface mount adajusa.es

Distribution box 32 elements, surface mount adajusa.es 2

Power outlet boxes

Modular distribution Box with cover for 32 modules IP65 ABS halogen-free

ELO-32

€145.19 (€119.99 tax excl.)

Surface-mounted socket Box , 685x330x155mm, made of halogen-free, UV-stable ABS, with IP65 protection class. The box can accommodate up to 32 17.5mm elements, surface or wall mounting. This industrial surface box can accommodate CETAC, Schuko or similar sockets as well as protection elements, differentials and magnetothermics. The hinged cover can be...

Power outlet boxes

Modular distribution Box with cover for 9 modules IP65 ABS halogen-free

ELO-9

€47.40 (€39.17 tax excl.)

Box for surface-mounted sockets, 245x215x155mm, made of halogen-free, UV-stable ABS, with IP65 protection class. The box can accommodate up to 9 17.5mm elements, surface or wall mounting. This industrial surface box can accommodate CETAC, Schuko or similar sockets as well as protection elements, differentials and magnetothermics. The hinged cover can be...

Motor starter 1CV 230V three-phase motor starter with contactor | Adajusa

Motor starter 1CV 230V three-phase motor starter with contactor | Adajusa 2

Pack

220/230 V three-phase motor contactor starters.

Three-phase motor 1HP 230V starter with contactor

992ADC2200753

€30.27 (€25.02 tax excl.)

Direct starter box for 0.75Kw (1HP) 220/230 V three-phase motors , with thermal relay for motor protection, start stop buttons included. Reference: ADC2200753 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

MCB circuit breaker 1 pole OMU adajusa OMB06116C

MCB circuit breakers 1 pole

Circuit breaker 1 pole 16A curve C - OMU

OMB06116C

€2.12 (€1.75 tax excl.)

MCB circuit breaker 1 16a C-curve, for short-circuit protection and overloads. With an breaking capacity of 6000A. Active protection with individual status indication. Manufacturer's Reference: OMB06116C Representative image for illustrative purposes, the supplied article is subject to the specifications indicated.

Motor starter 1,5CV 230V three phase with contactor | Adajusa

Motor starter 1,5CV 230V three phase with contactor | Adajusa 2

Pack

220/230 V three-phase motor contactor starters.

Three-phase motor starter 1.5HP 230V with contactor

992ADC2201103

€30.27 (€25.02 tax excl.)

Direct starter box for 1.1Kw (1.5HP) 220/230 V three-phase motors , with thermal relay for motor protection, start stop buttons included. Reference: ADC2201103 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

MCB circuit breaker 1 pole OMU adajusa OMB06120C

MCB circuit breakers 1 pole

Circuit breaker 1 pole 20A curve C - OMU

OMB06120C

€2.12 (€1.75 tax excl.)

MCB circuit breaker 1 pole 20A curve C, for protection against short circuits and overloads. With an assigned cutting power of 6000A. Active protection with individual status indication. Manufacturer's Reference: OMB06120C Representative image for illustrative purposes, the supplied article is subject to the specifications indicated.

2CV 230V three-phase motor starter with contactor | Adajusa

2CV 230V three-phase motor starter with contactor | Adajusa 2

Pack

220/230 V three-phase motor contactor starters.

Three-phase motor starter 2HP 230V with contactor

992ADC2201503

€30.27 (€25.02 tax excl.)

Direct starter box for 1.5Kw (2HP) 220/230V three-phase motors, with thermal relay for motor protection, start stop buttons included. Reference: ADC2201503 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

MCB circuit breaker 1 pole OMU adajusa OMB06132C

MCB circuit breakers 1 pole

Circuit breaker 1 pole 32A curve C - OMU

OMB06132C

€2.12 (€1.75 tax excl.)

MCB circuit breaker 1 pole 32A curve C, for protection against short circuits and overloads. With an assigned cutting power of 6000A. Active protection with individual status indication. Manufacturer's Reference: OMB06132C Representative image for illustrative purposes, the supplied article is subject to the specifications indicated.

3CV 230V three-phase motor starter with contactor | Adajusa

3CV 230V three-phase motor starter with contactor | Adajusa 2

Pack

220/230 V three-phase motor contactor starters.

Three-phase 3HP 230V motor starter with contactor

992ADC2202203

€34.97 (€28.90 tax excl.)

Direct starter box for 2.2Kw (3HP) 220/230V three-phase motors , with thermal relay for motor protection, start stop buttons included. Reference: ADC2202203 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Motor starter 5,5CV 230V three-phase motor starter with contactor | Adajusa

Motor starter 5,5CV 230V three-phase motor starter with contactor | Adajusa 2

Pack

220/230 V three-phase motor contactor starters.

Three-phase motor starter 5.5HP 230V with contactor

992ADC2204003

€34.97 (€28.90 tax excl.)

Direct starter box for 4Kw (5.5HP) 220/230 V three-phase motors , with thermal relay for motor protection, start stop buttons included. Reference: ADC2204003 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

4CV 230V three-phase motor starter with contactor | Adajusa

4CV 230V three-phase motor starter with contactor | Adajusa 2

Pack

220/230 V three-phase motor contactor starters.

Three-phase 4HP 230V motor starter with contactor

992ADC2203003

€34.97 (€28.90 tax excl.)

Direct starter box for 3Kw (4HP) 220/230 V three-phase motors , with thermal relay for motor protection, start stop buttons included. Reference: ADC2203003 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Fuses and fuse holders

Fuse 10x38 PV for 12A to 1000VCC photovoltaic applications

10x38-1KVc12A

€2.55 (€2.11 tax excl.)

Ceramic fuse 12A Ø10X38 PV at 1000Vcc, designed to offer a compact and safe protection of photovoltaic modules with voltages of up to 1000Vcc, also provides protection against overloads and short circuits according to the requirements of en 60269. Reference: 10x38 DC1000V 12A OMU Representative image for illustrative purposes, the article supplied will...

Motor starter 7,5CV 230V three-phase motor starter with contactor | Adajusa

Motor starter 7,5CV 230V three-phase motor starter with contactor | Adajusa 2

Pack

220/230 V three-phase motor contactor starters.

Three-phase 7.5HP 230V motor starter with contactor

992ADC2205503

€45.30 (€37.44 tax excl.)

Direct starter box for 5.5Kw (7.5HP) 220/230 V three-phase motors , with thermal relay for motor protection, start stop buttons included. Reference: ADC2205503 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

3.5mm fork terminal for screw and 05mm2 cable up to 1.5mm2

Isolated fork terminals

Bag of pre-insulated fork terminals 4.3mm for cable from 4 to 6 mm2

MVS4,3/6

€10.02 (€8.28 tax excl.)

Bag of 100 pre-insulated fork terminals with Ø4.3mm for cable from Ø 4mm² to Ø6mm², made of polyamide and electrolytic copper.Color: YellowTerminal diameter: 4.3mmreference: MVS 4.3mm 4-6mm2Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Fuses and fuse holders

Fuse 10x38 PV for 15A to 1000VCC photovoltaic applications

10x38-1KVc15A

€2.55 (€2.11 tax excl.)

Ceramic fuse 15A Ø10X38 PV at 1000Vcc, designed to offer compact and safe protection of photovoltaic modules with voltages of up to 1000Vcc, also provides protection against overloads and short circuits according to the requirements of en 60269. Reference: 10x38 DC1000V 15A OMU Representative image for illustrative purposes, the article supplied will...

single-phase pressure switch for 3-12 bar water pumps - ADAJUSA

Pressure switches, vacuum switches and flowmeters

single-phase pressure switch for 3-12 bar water pumps

PM12/G

€18.63 (€15.40 tax excl.)

Single-phase pressure switch for water pumps, for the regulation of the duty cycle between 3 to 12 bar. Reference: PM 12/G Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Isolated fork terminals

Bag of pre-insulated fork terminals 3.7mm for cable 4 up to 6mm2

MVS3,7/6

€12.04 (€9.95 tax excl.)

Bag of pre-insulated fork terminals of 3.7mm for cable with Ø 4mm² up to 6mm², made of polyamide and electrolytic copper estañado.Color: YellowTerminal diameter:reference: MVS 3.7mm 4-6mm2Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Fuses and fuse holders

Fuse 10x38 PV for photovoltaic applications 20a to 1000VCC

10x38-1KVc20A

€2.55 (€2.11 tax excl.)

Ceramic fuse 20a Ø10X38 PV at 1000Vcc, designed to offer a compact and safe protection of photovoltaic modules with voltages of up to 1000Vcc, also provides protection against overloads and short circuits according to the requirements of en 60269. Reference: 10x38 DC1000V 20a OMU Representative image for illustrative purposes, the article supplied...

Isolated fork terminals

Bag of 3.7mm pre-insulated fork terminals for cable 1.5 to 2.5mm2

MVS3,7/2.5

€6.03 (€4.98 tax excl.)

Bag of 100 terminals of pre-insulated fork of 3.7mm for cable of 1.5mm² up to 2.5mm², made of polyamide and electrolytic copper estañado.Color: BlueTerminal diameter: 3.7reference: MVS 3.7mm 1.5-2.5mm2Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Fuses and fuse holders

Ceramic fuse 14x51 for protection 16a 500Vac

14x51 16A

€1.02 (€0.84 tax excl.)

Ceramic fuse to protect 16a Ø14X51 at 500V against short circuits and overloads of electrical equipment and slow action, mainly used in industrial areas. Manufacturer/Distributor: OMU/Mixvill Reference:14x51 16a Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Fuses and fuse holders

Ceramic fuse 14x51 for protection 20a 500Vac

14x51 20A

€1.02 (€0.84 tax excl.)

Ceramic fuse to protect 20a Ø14X51 at 500V against short circuits and overloads of electrical equipment and slow action, mainly used in industrial areas. Manufacturer/Distributor: OMU/Mixvill Reference:14x51 20a Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Isolated fork terminals

Bag of 3.7mm pre-insulated fork terminals for cable 0.5 up to 1.5mm2

MVS3,7/1.5

€4.01 (€3.31 tax excl.)

Bag of 100 terminals of pre-insulated fork of 3.7mm for cable of 0.5mm² up to 1.5mm², made of polyamide and electrolytic copper estañado.Color: RedTerminal diameter: 3.7mmreference: MVS 3.7mm 0.5-1.5mm2Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Motor starter 0.25CV 400V three-phase with contactor | Adajusa

Motor starter 0.25CV 400V three-phase with contactor | Adajusa 2

Pack

380/400 V three-phase motor contactor starters

Three-phase motor starter 0.25HP 400V with contactor

992ADC3800183

€30.27 (€25.02 tax excl.)

Direct starter box for three-phase motors 0.18Kw (0.25HP) 380/400 V , with thermal relay for motor protection, start stop buttons included. Reference: ADC3800183 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Fuses and fuse holders

Ceramic fuse 14x51 for protection 25a 500Vac

14x51 25A

€1.02 (€0.84 tax excl.)

Ceramic fuse to protect 25a Ø14X51 at 500V against short circuits and overloads of electrical equipment and slow action, mainly used in industrial areas. Reference:14x51 25a Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Isolated fork terminals

Bag of pre-insulated fork terminals 4.3mm for cable 1.5 up to 2.5mm2

MVS4,3/2,5

€10.02 (€8.28 tax excl.)

Bag of 100 terminals of pre-insulated fork of 4.3mm for cable from Ø 1.5mm² up to 2.5mm², made of polyamide and electrolytic copper estañado.Color: BlueTerminal diameter: 4.3mmreference: MVS 4.3mm 1.5-2.5mm2Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Starter capacitor with terminals adajusa

Capacitors for electric motors

Starter capacitor 80-100uF 330Vac with terminals

CDI 80-100uF

€6.74 (€5.57 tax excl.)

Starter capacitor 80-100oF/330Vac type CD60,for single-phase electric motors, with PVC cover and terminal connection. This type of capacitor has been designed exclusively for use as starter capacitors in single-phase electric motors. reference: CDI 80-100 F/330VacRepresentative image for illustrative purposes, the supplied article is subject to the...

Motor starter 0,5CV 400V three-phase with contactor | Adajusa

Motor starter 0,5CV 400V three-phase with contactor | Adajusa 2

Pack

380/400 V three-phase motor contactor starters

Three-phase motor starter 0.5HP 400V with contactor

992ADC3800373

€30.27 (€25.02 tax excl.)

Direct starter box for three-phase motors 0.37Kw (0.5HP) 380/400 V , with thermal relay for motor protection, start stop buttons included. Reference: ADC3800373 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Fuses and fuse holders

Ceramic fuse 14x51 protection 32A at 500Vac

14x51 32A

€1.02 (€0.84 tax excl.)

Ceramic fuse of protection of 32A Ø14X51 to 500V against short circuits and overloads of electrical equipment and slow action, mainly used in industrial areas. Reference:14x51 32A Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Isolated fork terminals

Bag of 4.3mm pre-insulated fork terminals for cable 0.5 to 1.5mm2

MVS4,3/1,5

€4.01 (€3.31 tax excl.)

Bag of 100 terminals of pre-insulated fork of 4.3mm for cable from Ø 0.5mm² up to 1.5mm², made of polyamide and electrolytic copper estañado.Color: RedTerminal diameter: 4.3mmreference: MVS 4.3mm 0.5-1.5mm2Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Capacitors for electric motors

Starter capacitor 100-125uF 330Vac with terminals

CDI 100-125uF

€8.07 (€6.67 tax excl.)

Starter capacitor 100-125oF/330Vac type CD60,for single-phase electric motors, with PVC cover and terminal connection. This type of capacitor has been designed exclusively for use as starter capacitors in single-phase electric motors. reference: CDI 100-125 F/330VacRepresentative image for illustrative purposes, the supplied article is subject to the...

Motor starter 0.75CV 400V three-phase with contactor | Adajusa

Motor starter 0.75CV 400V three-phase with contactor | Adajusa 2

Pack

380/400 V three-phase motor contactor starters

Three-phase motor starter 0.75HP 400V with contactor

992ADC3800553

€30.27 (€25.02 tax excl.)

Direct starter box for three-phase motors 0.55Kw (0.75HP) 380/400 V , with thermal relay for motor protection, start stop buttons included. Reference: ADC3800553 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Control and protection relays, thermostats, temperature probes

Mechanical ambient thermostat

MT-2

€10.95 (€9.05 tax excl.)

Mechanical ambient thermostat for the control and regulation of temperature in rooms and homes. Reference: MT-2

14x51 cylindrical fuse for protection of electronic equipment 14x51|ADAJUSA

Fuses and fuse holders

Ceramic fuse 14x51 for protection 40a 500Vac

14x51 40A

€1.02 (€0.84 tax excl.)

Ceramic fuse to protect 40a Ø14X51 at 500V against short circuits and overloads of electrical equipment and slow action, mainly used in industrial areas. Reference:14x51 40a Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Isolated fork terminals

Bag of pre-insulated fork terminals 5.3mm for cable 0.5 up to 1.5mm2

MVS5,3/1,5

€4.01 (€3.31 tax excl.)

Bag of 100 pre-insulated fork terminals of 5.3mm for cable from Ø 0.5mm² up to 1.5mm², made of polyamide and electrolytic copper estañado.Color: RedTerminal diameter: 5.3mmreference: MVS 5.3mm 0.5-1.5mm2Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Capacitors for electric motors

Starter capacitor 125-160uF 330Vac with terminals

CDI 125-160uF

€7.68 (€6.35 tax excl.)

Starter capacitor 125-160oF/330Vac type CD60,for single-phase electric motors, with PVC cover and terminal connection. This type of capacitor has been designed exclusively for use as starter capacitors in single-phase electric motors. Reference: CDI 125-160 F/330VacRepresentative image for illustrative purposes, the supplied article is subject to the...

Three-phase 1CV 400V motor starter with contactor | Adajusa

Three-phase 1CV 400V motor starter with contactor | Adajusa 2

Pack

380/400 V three-phase motor contactor starters

Three-phase 1HP 400V motor starter with contactor

992ADC3800753

€30.27 (€25.02 tax excl.)

Direct starter box for three-phase motors 0.75Kw (1HP) 380/400 V , with thermal relay for motor protection, start stop buttons included. Reference: ADC3800753 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Fuses and fuse holders

Ceramic fuse 14x51 protection 50A to 500Vac

14x51 50A

€1.02 (€0.84 tax excl.)

Ceramic fuse of protection of 50A Ø14X51 to 500V against short circuits and overloads of electrical equipment and slow action, mainly used in industrial areas. Reference:14x51 50A Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Isolated fork terminals

Bag of 5.3mm pre-insulated fork terminals for cable 1.5 to 2.5mm2

MVS5,3/2,5

€8.05 (€6.65 tax excl.)

Bag of 100 terminals of pre-insulated fork of 5.3mm for cable from Ø 1.5mm² to 2.5mm², made of polyamide and electrolytic copper estañado.Color: BlueTerminal diameter: 5.3mmreference: MVS 5.3mm 1.5-2.5mm2Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Capacitors for electric motors

Starter capacitor 160-200uF 330Vac with terminals

CDI 160-200uF

€10.48 (€8.66 tax excl.)

Starter capacitor 160-200oF/330Vac type CD60,for single-phase electric motors, with PVC cover and terminal connection. This type of capacitor has been designed exclusively for use as starter capacitors in single-phase electric motors. reference: CDI 160-200 F/330VacRepresentative image for illustrative purposes, the supplied article is subject to the...

Motor starter 1,5CV 400V three-phase with contactor | Adajusa

Motor starter 1,5CV 400V three-phase with contactor | Adajusa 2

Pack

380/400 V three-phase motor contactor starters

Three-phase motor starter 1.5HP 400V with contactor

992ADC3801103

€30.27 (€25.02 tax excl.)

Direct starter box for 1.1Kw (1.5HP) 380/400 V three-phase motors , with thermal relay for motor protection, start stop buttons included. Reference: ADC3801103 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Isolated fork terminals

Bag of 5.3mm insulated fork terminals for 4 to 6mm cable2

MVS5,3/6

€14.06 (€11.62 tax excl.)

Bag of 100 terminals of pre-insulated fork of 5,3mm for cable of Ø 4mm² up to 6mm², made of polyamide and electrolytic copper estañado.Color: YellowTerminal diameter: 5.3mmreference: MVS 5.3mm 4-6mm2Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Capacitors for electric motors

Starter capacitor 200-250uF 330Vac with terminals

CDI 200-250uF

€9.08 (€7.50 tax excl.)

Starter capacitor 200-250oF/330Vac type CD60,for single-phase electric motors, with PVC cover and terminal connection. This type of capacitor has been designed exclusively for use as starter capacitors in single-phase electric motors. reference: CDI 200-250 F/330VacRepresentative image for illustrative purposes, the supplied article is subject to the...

MCB circuit breaker 1 pole OMU adajusa OMB06106C

MCB circuit breakers 1 pole

Circuit breaker 1 pole 6A curve C - OMU

OMB06106C

€2.12 (€1.75 tax excl.)

MCB circuit breaker 1 pole 6A curve C, for protection against short circuits and overloads. With an assigned cutting power of 6000A. Active protection with individual status indication. Manufacturer's Reference: OMB06106C Representative image for illustrative purposes, the supplied article is subject to the specifications indicated.

2CV 400V three-phase motor starter with contactor | Adajusa

2CV 400V three-phase motor starter with contactor | Adajusa 2

Pack

380/400 V three-phase motor contactor starters

Three-phase motor starter 2HP 400V with contactor

992ADC3801503

€30.27 (€25.02 tax excl.)

Direct starter box for 1.5Kw (2HP) 380/400 V three-phase motors, with thermal relay for motor protection, start stop buttons included. Reference: ADC3801503 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Capacitors for electric motors

Permanent capacitor 2uF 450Vac M8

CBBV 2uF450V

€2.69 (€2.22 tax excl.)

Permanent capacitor2μF/450Vac for electric motors, running capacitor. The external construction of the capacitors is in cylindrical container with PVC sheath, electrical connection by means of hose, mechanical installation by means of stud bolt and nut M8x1,25. Reference: CBBV 2uF 450VacRepresentative image for illustrative purposes, the item supplied...

Isolated fork terminals

Bag of 6.4mm pre-insulated fork terminals for cable from 4 to 6 mm2

MVS6,4/6

€16.04 (€13.26 tax excl.)

Bag of 100 terminals of pre-insulated fork of 6.4mm for cable from Ø 4mm² to 6mm², made of polyamide and electrolytic copper estañado.Color: YellowTerminal diameter: 6.4mmreference: MVS 6.4mm 4-6mm2Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

MCB circuit breaker 1 pole OMU adajusa OMB06102C

MCB circuit breakers 1 pole

Circuit breaker 1 pole 2A curve C - OMU

OMB06102C

€2.12 (€1.75 tax excl.)

MCB circuit breaker 1 pole 2A curve C, for protection against short circuits and overloads. With an assigned cutting power of 6000A. Active protection with individual status indication. Manufacturer's Reference: OMB06102C Representative image for illustrative purposes, the supplied article is subject to the specifications indicated.

3CV 400V three-phase motor starter with contactor | Adajusa

3CV 400V three-phase motor starter with contactor | Adajusa 2

Pack

380/400 V three-phase motor contactor starters

Three-phase 3HP 400V motor starter with contactor

992ADC3802203

€30.27 (€25.02 tax excl.)

Direct starter box for 2.2Kw (3HP) 380/400 V three-phase motors, with thermal relay for motor protection, start stop buttons included. Reference: ADC3802203 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Isolated fork terminals

Bag of 6.4mm pre-insulated fork terminals for 1.5 to 2.5mm cable2

MVS6,4/2,5

€12.04 (€9.95 tax excl.)

Bag of 100 terminals of pre-insulated fork of 6.4mm for cable from Ø 1.5mm² up to 2.5mm², made of polyamide and electrolytic copper estañado.Color: BlueTerminal diameter: 6.4mmreference: MVS 6.4mm 1.5-2.5mm2Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Capacitors for electric motors

Permanent capacitor 3uF 450Vac M8

CBBV 3uF450V

€2.00 (€1.65 tax excl.)

Permanent capacitor 3F/450Vac for electric motors, power capacitor. The external construction of the capacitors is in cylindrical container with PVC sleeve, electrical connection by hose, mechanical installation by asparagus and nut M8x1.25. reference: CBBV60 3uF 450VacRepresentative image for illustrative purposes, the supplied article is subject to the...

MCB circuit breaker 1 pole OMU adajusa OMB06104C

MCB circuit breakers 1 pole

Circuit breaker 1 pole 4A curve C - OMU

OMB06104C

€2.12 (€1.75 tax excl.)

MCB circuit breaker 1 pole 4A curve C, for protection against short circuits and overloads. With an assigned cutting power of 6000A. Active protection with individual status indication. Manufacturer's Reference: OMB06104C Representative image for illustrative purposes, the supplied article is subject to the specifications indicated.

MCB circuit breaker 2 poles 6A OMU adajusa OMB06206C

MCB circuit breakers 2 poles

Circuit breaker 2 poles 6A curve C - OMU

OMB06206C

€4.63 (€3.83 tax excl.)

MCB circuit breaker 2 poles 6A curve C, for protection against short circuits and overloads in single-phase or biphasic installations. With an assigned cutting power of 6000A. Active protection of both poles with individual status indication. Protects both drivers. It can be used in installations and assemblies up to 500VAC. Manufacturer's Reference:...

4CV 400V three-phase motor starter with contactor | Adajusa

4CV 400V three-phase motor starter with contactor | Adajusa 2

Pack

380/400 V three-phase motor contactor starters

Three-phase 4HP 400V motor starter with contactor

992ADC3803003

€30.27 (€25.02 tax excl.)

Direct starter box for 3Kw (4HP) 380/400 V three-phase motors , with thermal relay for motor protection, start stop buttons included. Reference: ADC3803003 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Isolated fork terminals

Bag of 6.4mm pre-insulated fork terminals for cable from 0.5 to 1.5 mm2

MVS6,4/1,5

€6.03 (€4.98 tax excl.)

Bag of 100 terminals of pre-insulated fork of 6.4mm for cable from Ø 0.5mm² up to 1.5mm², made of polyamide and electrolytic copper estañado.Color: RedTerminal diameter: 6.4mmreference: MVS 6.4mm 0.5-1.5mm2Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Capacitors for electric motors

Permanent capacitor 4uF 450Vac M8

CBBV 4uF450V

€2.80 (€2.31 tax excl.)

Permanent capacitor 4F/450Vac for electric motors, power capacitor. The external construction of the capacitors is in cylindrical container with PVC sleeve, electrical connection by hose, mechanical installation by asparagus and nut M8x1.25. reference: CBBV60 4uF 450VacRepresentative image for illustrative purposes, the supplied article is subject to the...

MCB circuit breaker 1 pole OMU adajusa OMB06110C

MCB circuit breakers 1 pole

Circuit breaker 1 pole 10A curve C - OMU

OMB06110C

€2.12 (€1.75 tax excl.)

MCB circuit breaker 1 pole 10A curve C, for protection against short circuits and overloads. With an assigned cutting power of 6000A. Active protection with individual status indication. Manufacturer's Reference: OMB06110C Representative image for illustrative purposes, the supplied article is subject to the specifications indicated.

Motor starter 5,5CV 400V three phase with contactor | Adajusa

Motor starter 5,5CV 400V three phase with contactor | Adajusa 2

Pack

380/400 V three-phase motor contactor starters

Three-phase 5.5HP 400V motor starter with contactor

992ADC3804003

€33.08 (€27.34 tax excl.)

Direct starter box for 4Kw (5.5HP) 380/400 V three-phase motors, with thermal relay for motor protection, start stop buttons included. Reference: ADC3804003 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Capacitors for electric motors

Permanent capacitor 5uF 450Vac M8

CBBV 5uF450V

€2.41 (€1.99 tax excl.)

Permanent capacitor 5F/450Vac for electric motors, power capacitor. The external construction of the capacitors is in cylindrical container with PVC sleeve, electrical connection by hose, mechanical installation by asparagus and nut M8x1.25. reference: CBBV60 5uF 450VacRepresentative image for illustrative purposes, the supplied article is subject to the...

Motor starter 7,5CV 400V three-phase with contactor | Adajusa

Motor starter 7,5CV 400V three-phase with contactor | Adajusa 2

Pack

380/400 V three-phase motor contactor starters

Three-phase motor starter 7.5HP 400V with contactor

992ADC3805503

€33.08 (€27.34 tax excl.)

Direct starter box for 5.5Kw (7.5HP) 380/400 V three-phase motors, with thermal relay for motor protection, start stop buttons included. Reference: ADC3805503 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Capacitors for electric motors

Permanent capacitor 6uF 450Vac M8

CBBV 6uF450V

€2.44 (€2.02 tax excl.)

Permanent capacitor 6F/450Vac for electric motors, power capacitor. The external construction of the capacitors is in cylindrical container with PVC sleeve, electrical connection by hose, mechanical installation by asparagus and nut M8x1.25. reference: CBBV60 6uF 450VacRepresentative image for illustrative purposes, the supplied article is subject to the...

MCB circuit breaker 3 poles 10A OMU adajusa OMB06310C

MCB circuit breakers 3 poles

Circuit breaker 3 poles 10A curve C - OMU

OMB06310C

€6.97 (€5.76 tax excl.)

MCB circuit breaker 3 poles 10A curve C, for protection against short circuits and overloads in three-phase installations. With an assigned cutting power of 6000A. Protects both drivers. It can be used in installations and assemblies up to 500VAC. Manufacturer's Reference: OMB06310C Representative image for illustrative purposes, the supplied article...

10CV 400V three-phase motor starter with contactor | Adajusa

10CV 400V three-phase motor starter with contactor | Adajusa 2

Pack

380/400 V three-phase motor contactor starters

Three-phase 10HP 400V motor starter with contactor

992ADC3807503

€33.08 (€27.34 tax excl.)

Direct starter box for 7.5Kw (10HP) 380/400 V three-phase motors , with thermal relay for motor protection, start stop buttons included. Reference: ADC3807503 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Capacitors for electric motors

Permanent capacitor 8uF 450Vac M8

CBBV 8uF450V

€2.96 (€2.45 tax excl.)

Permanent capacitor 8μF/450Vac for electric motors, power capacitor. The external construction of the condensers is in cylindrical container with PVC sheath, electrical connection by hose, mechanical installation by asparagus and nut M8x1,25. reference: CBBV60 8uF 450VacRepresentative image for illustrative purposes, the article supplied corresponds to...

MCB circuit breaker 3 poles 16A OMU adajusa OMB06316C

MCB circuit breakers 3 poles

Circuit breaker 3 poles 16A curve C - OMU

OMB06316C

€6.97 (€5.76 tax excl.)

MCB circuit breaker 3 poles 16A curve C, for protection against short circuits and overloads in three-phase installations. With an assigned cutting power of 6000A. Protects both drivers. It can be used in installations and assemblies up to 500VAC. Manufacturer's Reference: OMB06316C Representative image for illustrative purposes, the supplied article...

MCB circuit breaker 1 pole OMU adajusa OMB06125C

MCB circuit breakers 1 pole

Circuit breaker 1 pole 25A curve C - OMU

OMB06125C

€2.02 (€1.67 tax excl.)

MCB circuit breaker 1 pole 25A curve C, for protection against short circuits and overloads. With an assigned cutting power of 6000A. Active protection with individual status indication. Manufacturer's Reference: OMB06125C Representative image for illustrative purposes, the supplied article is subject to the specifications indicated.

Capacitors for electric motors

Permanent capacitor 10uF 450Vac M8

CBBV 10uF450V

€2.82 (€2.33 tax excl.)

Permanent capacitor 10oF/450Vac for electric motors, power capacitor. The external construction of the capacitors is in cylindrical container with PVC sleeve, electrical connection by hose, mechanical installation by asparagus and nut M8x1.25. reference: CBBV60 10uF 450VacRepresentative image for illustrative purposes, the supplied article is subject to...

MCB circuit breaker 3 poles 20A OMU adajusa OMB06320C

MCB circuit breakers 3 poles

Circuit breaker 3 poles 20A curve C - OMU

OMB06320C

€6.90 (€5.70 tax excl.)

MCB circuit breaker 3 poles 20A curve C, for protection against short circuits and overloads in three-phase installations. With an assigned cutting power of 6000A. Protects both drivers. It can be used in installations and assemblies up to 500VAC. Manufacturer's Reference: OMB06320C Representative image for illustrative purposes, the supplied article...

Capacitors for electric motors

Permanent capacitor 12uF 450Vac M8

CBBV 12uF450V

€3.07 (€2.54 tax excl.)

Permanent capacitor 12oF/450Vac for electric motors, power capacitor. The external construction of the capacitors is in cylindrical container with PVC sleeve, electrical connection by hose, mechanical installation by asparagus and nut M8x1.25. Reference: CBBV60 12uF 450VacRepresentative image for illustrative purposes, the supplied article is subject to...

MCB circuit breaker 3 poles 25A OMU adajusa OMB06325C

MCB circuit breakers 3 poles

Circuit breaker 3 poles 25A curve C - OMU

OMB06325C

€6.97 (€5.76 tax excl.)

MCB circuit breaker 3 poles 25A curve C, for protection against short circuits and overloads in three-phase installations. With an assigned cutting power of 6000A. Protects both drivers. It can be used in installations and assemblies up to 500VAC. Manufacturer's Reference: OMB06325C Representative image for illustrative purposes, the supplied article...

MCB circuit breaker 1 pole OMU adajusa OMB06140C

MCB circuit breakers 1 pole

Circuit breaker 1 pole 40A curve C - OMU

OMB06140C

€2.12 (€1.75 tax excl.)

MCB circuit breaker 1 pole 40A curve C, for protection against short circuits and overloads. With an assigned cutting power of 6000A. Active protection with individual status indication. Manufacturer's Reference: OMB06140C Representative image for illustrative purposes, the supplied article is subject to the specifications indicated.

Capacitors for electric motors

Permanent capacitor 14uF 450Vac M8

CBBV 14uF450V

€3.29 (€2.72 tax excl.)

Permanent capacitor 14oF/450Vac for electric motors, power capacitor. The external construction of the capacitors is in cylindrical container with PVC sleeve, electrical connection by hose, mechanical installation by asparagus and nut M8x1.25. reference: CBBV60 14uF 450VacRepresentative image for illustrative purposes, the supplied article is subject to...

MCB circuit breaker 4 poles 16A OMU adajusa OMB06416C

MCB circuit breakers 4 poles

Circuit breaker 4 poles 16A curve C - OMU

OMB06416C

€9.78 (€8.08 tax excl.)

MCB circuit breaker 4 poles 16A curve C, for protection against short circuits and overloads in three-phase installations. With an assigned cutting power of 6000A. Active protection of all poles with individual status indication. Protects both drivers. It can be used in installations and assemblies up to 500VAC. Manufacturer's Reference: OMB06416C...

MCB circuit breaker 1 pole OMU adajusa OMB06150C

MCB circuit breakers 1 pole

Circuit breaker 1 pole 50A curve C - OMU

OMB06150C

€2.12 (€1.75 tax excl.)

MCB circuit breaker 1 pole 50A curve C, for protection against short circuits and overloads. With an assigned cutting power of 6000A. Active protection with individual status indication. Manufacturer's Reference: OMB06150C Representative image for illustrative purposes, the supplied article is subject to the specifications indicated.

Motor starter 0.75CV 230V single-phase with contactor | Adajusa

Motor starter 0.75CV 230V single-phase with contactor | Adajusa 2

Pack

Contactor starter single-phase motor 220/230V

Motor starter 0.75 hp 230V single phase with contactor

992ADC2200551

€30.27 (€25.02 tax excl.)

Direct starter box for single-phase motors 0.55Kw (0.75CV) 220/230 V , with thermal relay for motor protection, start stop buttons included. Reference: ADC2200371 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Capacitors for electric motors

Permanent capacitor 16uF 450Vac M8

CBBV 16uF450V

€3.74 (€3.09 tax excl.)

Permanent capacitor 16oF/450Vac for electric motors, power capacitor. The external construction of the capacitors is in cylindrical container with PVC sleeve, electrical connection by hose, mechanical installation by asparagus and nut M8x1.25. reference: CBBV60 16uF 450VacRepresentative image for illustrative purposes, the supplied article is subject to...

MCB circuit breaker 4 poles 20A OMU adajusa OMB06420C

MCB circuit breakers 4 poles

Circuit breaker 4 poles 20A curve C - OMU

OMB06420C

€10.26 (€8.48 tax excl.)

MCB circuit breaker 4 poles 20A curve C, for protection against short circuits and overloads in three-phase installations. With an assigned cutting power of 6000A. Active protection of all poles with individual status indication. Protects both drivers. It can be used in installations and assemblies up to 500VAC. Manufacturer's Reference: OMB06420C...

MCB circuit breaker 1 pole OMU adajusa OMB06163C

MCB circuit breakers 1 pole

Circuit breaker 1 pole 63A curve C - OMU

OMB06163C

€2.09 (€1.73 tax excl.)

MCB circuit breaker 1 pole 63A curve C, for protection against short circuits and overloads. With an assigned cutting power of 6000A. Active protection with individual status indication. Manufacturer's Reference: OMB06163C Representative image for illustrative purposes, the supplied article is subject to the specifications indicated.

Motor starter 1CV 230V single-phase with contactor | Adajusa

Motor starter 1CV 230V single-phase with contactor | Adajusa 2

Pack

Contactor starter single-phase motor 220/230V

Motor starter 1 hp 230V single phase with contactor

992ADC2200751

€30.27 (€25.02 tax excl.)

Direct starter box for single-phase motors 0.75Kw (1CV) 220/230 V, with thermal relay for motor protection, start stop buttons included. Reference: ADC2200751 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Capacitors for electric motors

Permanent capacitor 18uF 450Vac M8

CBBV 18uF450V

€3.50 (€2.89 tax excl.)

18μF/450Vacpermanent capacitor for electric motors, running capacitor. The external construction of the capacitors is in cylindrical container with PVC sheath, electrical connection by means of hose, mechanical installation by means of stud bolt and nut M8x1,25. Reference: CBBV 18uF 450VacRepresentative image for illustrative purposes, the item supplied...

View

Connection and assembly material

Direct mounting terminal block 1,5-16mm2 10mm thick

SZK16F10

€1.33 (€1.10 tax excl.)

Direct mounting terminal block for cables with cross section 1.5-16mm2, thickness of the mounting block 10mm.Part number: SZK16F10Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

MCB circuit breaker 4 poles 25A OMU adajusa OMB06425C

MCB circuit breakers 4 poles

Circuit breaker 4 poles 25A curve C - OMU

OMB06425C

€10.26 (€8.48 tax excl.)

MCB circuit breaker 4 poles 25A curve C, for protection against short circuits and overloads in three-phase installations. With an assigned cutting power of 6000A. Active protection of all poles with individual status indication. Protects both drivers. It can be used in installations and assemblies up to 500VAC. Manufacturer's Reference: OMB06425C...

Motor starter 1,5CV 230V single-phase with contactor | Adajusa

Motor starter 1,5CV 230V single-phase with contactor | Adajusa 2

Pack

Contactor starter single-phase motor 220/230V

Motor starter 1.5 HP 230V single-phase with contactor

992ADC2201101

€30.27 (€25.02 tax excl.)

Direct starter box for 1.1Kw (1.5CV) 220/230 V single-phase motors, with thermal relay for motor protection, start stop buttons included. Reference: ADC2201101 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Keys

Wrench set Torx 9 pieces

6601

€11.29 (€9.33 tax excl.)

Wrench set Torx consisting of 9 pieces of different sizes. Double position L-shaped wrenches, with long handles that allow applying higher torque and reaching hard-to-reach places. Manufactured in high resistance steel that provides a great durability to the tool. Sizes included: T10, T15, T20, T25, T27, T30, T40, T45, T50 Reference: 6601Representative...

Direct mounting terminal block 1.5-35mm2 10mm thick 10mm wide strip | Adajusa

Connection and assembly material

Direct mounting terminal block 1,5-35mm2 10mm thick plate

SZK35F10

€2.12 (€1.75 tax excl.)

Direct mounting terminal block for cable cross-section 1.5-35mm2, thickness of the mounting block 10mm.Part number: SZK35F10Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Capacitors for electric motors

Permanent capacitor 20uF 450Vac M8

CBBV 20uF450V

€4.04 (€3.34 tax excl.)

Permanent capacitor 20F/450Vac for electric motors, power capacitor. The external construction of the capacitors is in cylindrical container with PVC sleeve, electrical connection by hose, mechanical installation by asparagus and nut M8x1.25. reference: CBBV60 20uF 450VacRepresentative image for illustrative purposes, the supplied article is subject to...

View

2CV 230V motor starter single-phase with contactor | Adajusa

2CV 230V motor starter single-phase with contactor | Adajusa 2

Pack

Contactor starter single-phase motor 220/230V

Motor starter 2HP 230V single phase with contactor

992ADC2201501

€34.97 (€28.90 tax excl.)

Direct starter box for 1.5Kw (2HP) 220/230 V single-phase motors, with thermal relay for motor protection, start stop buttons included. Reference: ADC2201501 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Keys

Wrench set Allen 9 pieces

6609

€11.48 (€9.49 tax excl.)

Set of wrenches Allen consisting of 9 pieces of different sizes. L-shaped wrenches and long handle with ball-ended tip that allows applying higher torque and reaching hard-to-reach places. Manufactured in high resistance steel that provides a great durability to the tool. Metric sizes included: 1.5 - 2.0 - 2.5 - 3.0 - 4.0 - 5.0 - 6.0 - 8.0 - 10mm Part...

Connection and assembly material

Direct mounting terminal block 16-70mm2 5mm thick plate

SZK70F5

€2.53 (€2.09 tax excl.)

Direct mounting terminal block for cable cross-section 16-70mm2, thickness of the mounting block 5mm.Reference: SZK70F5Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Capacitors for electric motors

Permanent capacitor 25uF 450Vac M8

CBBV 25uF450V

€4.40 (€3.64 tax excl.)

Permanent capacitor 25μF/450Vac for electric motors, power capacitor. The external construction of the condensers is in cylindrical container with PVC sheath, electrical connection by hose, mechanical installation by asparagus and nut M8x1,25. reference: CBBV60 25uF 450VacRepresentative image for illustrative purposes, the article supplied corresponds to...

Motor starter 3CV 230V single-phase with contactor | Adajusa

Motor starter 3CV 230V single-phase with contactor | Adajusa 2

Pack

Contactor starter single-phase motor 220/230V

Single-phase motor starter 3 hp 230V with contactor

992ADC2202201

€34.97 (€28.90 tax excl.)

Direct starter box for 2.2Kw (3CV) 220/230 V single-phase motors, with thermal relay for motor protection, start stop buttons included. Reference: ADC2202201 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Keys

Combination flat key 10 mm

8631105

€2.34 (€1.93 tax excl.)

10mm combination flat wrench with one fixed and one star-shaped jaws for both common and specialized applications. Its design allows access to hard to reach places, made of high strength steel that provides great durability to the tool. Part number: 8631105Representative image for illustrative purposes, the item supplied will correspond to the...

Direct mounting terminal block 16-70mm2 10mm thick 10mm flat bar | Adajusa

Connection and assembly material

Direct mounting terminal block 16-70mm2 10mm thick plate

SZK70F10

€2.73 (€2.26 tax excl.)

Direct mounting terminal block for cable cross-section 16-70mm2, thickness of the mounting block 10mm.Reference: SZK70F10Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Capacitors for electric motors

Permanent capacitor 30uF 450Vac M8

CBBV 30uF450V

€4.85 (€4.01 tax excl.)

Permanent capacitor 30μF/450Vac for electric motors, power capacitor. The external construction of the condensers is in cylindrical container with PVC sheath, electrical connection by hose, mechanical installation by asparagus and nut M8x1,25. reference: CBBV60 30uF 450VacRepresentative image for illustrative purposes, the article supplied corresponds to...

Keys

Combination flat key 13 mm

8631108

€3.29 (€2.72 tax excl.)

13mm combination flat wrench with one fixed and one star-shaped jaws for both common and specialized applications. Its design allows access to hard to reach places, made of high strength steel that provides great durability to the tool. Part number: 8631108Representative image for illustrative purposes, the item supplied will correspond to the...

Direct mounting terminal block 16-120mm2 5mm thick plate | Adajusa

Connection and assembly material

Direct mounting terminal 16-120mm2 plate thickness 5mm

SZK120F5

€4.20 (€3.47 tax excl.)

Terminal for direct mounting on a plate for cables with a section of 16-120mm 2 , thickness of the mounting plate 5mm. Reference: SZK120F5 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Capacitors for electric motors

Permanent capacitor 35uF 450Vac M8

CBBV 35uF450V

€5.02 (€4.15 tax excl.)

Permanent capacitor 35μF/450Vac for electric motors, power capacitor. The external construction of the condensers is in cylindrical container with PVC sheath, electrical connection by hose, mechanical installation by asparagus and nut M8x1,25. reference: CBBV60 35uF 450VacRepresentative image for illustrative purposes, the article supplied corresponds to...

Keys

Combination flat wrench 17 mm

8631112

€4.94 (€4.08 tax excl.)

17mm combination flat wrench with one fixed and one star-shaped jaws for both common and specialized applications. Its design allows access to hard to reach places, made of high strength steel that provides great durability to the tool. Part number: 8631112Representative image for illustrative purposes, the item supplied will correspond to the...

Direct mounting terminal block 16-120mm2 10mm thick 10mm flat bar Adajusa

Connection and assembly material

Direct mounting terminal block 16-120mm2 10mm thick plate

SZK120F10

€4.56 (€3.77 tax excl.)

Direct mounting terminal block for cable cross-section 16-120mm2, thickness of the mounting block 10mm.Reference: SZK120F10Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Capacitors for electric motors

Permanent capacitor 40uF 450Vac M8

CBBV 40uF450V

€5.55 (€4.59 tax excl.)

Permanent capacitor 40μF/450Vac for electric motors, power capacitor. The external construction of the condensers is in cylindrical container with PVC sheath, electrical connection by hose, mechanical installation by asparagus and nut M8x1,25. reference: CBBV60 40uF 450VacRepresentative image for illustrative purposes, the article supplied corresponds to...

Keys

Combination flat key 19 mm

8631114

€5.65 (€4.67 tax excl.)

19mm combination flat wrench with one fixed and one star-shaped jaws for both common and specialized applications. Its design allows access to hard to reach places, made of high strength steel that provides great durability to the tool. Part number: 8631114Representative image for illustrative purposes, the item supplied will correspond to the...

Capacitors for electric motors

Permanent capacitor 45uF 450Vac M8

CBBV 45uF450V

€6.88 (€5.69 tax excl.)

Permanent capacitor45μF/450Vac for electric motors, running capacitor. The external construction of the capacitors is in cylindrical container with PVC sheath, electrical connection by means of hose, mechanical installation by means of stud bolt and nut M8x1,25. Reference: CBBV 45uF 450VacRepresentative image for illustrative purposes, the item supplied...

Direct mounting terminal block 120-185mm2 5mm thick plate | Adajusa

Connection and assembly material

Direct mounting terminal 120-185mm2 5mm thick plate

SZK185F5

€4.60 (€3.80 tax excl.)

Direct mounting terminal block for cable cross-section 120-185mm2, thickness of the mounting block 5mm.Part number: SZK185F5Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Differential 2 poles 25A 30mA OMU adajusa OMR

Bipolar differential (2 poles)

Differential Circuit Breaker RCD 2 poles 25A 30mA 10kA class AC - OMU

OMR102025003

€12.22 (€10.10 tax excl.)

Single-phase differential 2 Poles (P+N) 25A 0.03A (30mA) CLASS AC 10kA. Electromagnetic type, which allows you not to lose protection in case of variation in voltage input and thus be able to maintain the protection of the active phase in case of neutral loss. Standard "AC" class differential. Ref: OMR102025003 Representative image for illustrative...

Keys

Combination flat key 22 mm

8631117

€7.07 (€5.84 tax excl.)

22mm combination flat wrench with one fixed and one star-shaped jaws for both common and specialized applications. Its design allows access to hard to reach places, made of high strength steel that provides great durability to the tool. Part number: 8631117Representative image for illustrative purposes, the item supplied will correspond to the...

Direct mounting terminal block 120-185mm2 thickness 10mm | Adajusa

Connection and assembly material

Direct mounting terminal 120-185mm2 10mm thick plate

SZK185F10

€4.94 (€4.08 tax excl.)

Direct mounting terminal block for cable cross-section 120-185mm2, thickness of the mounting block 10mm.Part number: SZK185F10 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated. .

Capacitors for electric motors

Permanent capacitor 50uF 450Vac M8

CBBV 50uF450V

€6.15 (€5.08 tax excl.)

Permanent capacitor 50μF/450Vac for electric motors, power capacitor. The external construction of the condensers is in cylindrical container with PVC sheath, electrical connection by hose, mechanical installation by asparagus and nut M8x1,25. reference: CBBV60 50uF 450VacRepresentative image for illustrative purposes, the article supplied corresponds to...

Direct mounting terminal block 120-300mm2 5mm thick plate | Adajusa

Connection and assembly material

Direct mounting terminal 120-300mm2 5mm thick plate

SZK300F5

€20.15 (€16.65 tax excl.)

Direct mounting terminal block for cable cross-section 120-300mm2, thickness of the mounting block 5mm.Reference: SZK300F5Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Capacitors for electric motors

Permanent capacitor 60uF 450Vac M8

CBBV 60uF450V

€7.37 (€6.09 tax excl.)

Permanent capacitor 60μF/450Vac for electric motors, power capacitor. The external construction of the condensers is in cylindrical container with PVC sheath, electrical connection by hose, mechanical installation by asparagus and nut M8x1,25. reference: CBBV60 60uF 450VacRepresentative image for illustrative purposes, the article supplied corresponds to...

Bipolar differential (2 poles)

Differential Circuit Breaker RCD 2 poles 25A 300mA 10kA class AC - OMU

OMR10202503

€12.22 (€10.10 tax excl.)

Single-phase differential 2 Poles (P+N) 25A 0.3A (300mA) CLASS AC 10kA. Electromagnetic type, which allows you not to lose protection in case of variation in voltage input and thus be able to maintain the protection of the active phase in case of neutral loss. Standard "AC" class differential. Ref: OMR10202503 Representative image for illustrative...

Capacitors for electric motors

Permanent capacitor 2uF 450Vac with terminals

CBBS 2uF450V

€1.85 (€1.53 tax excl.)

Permanent capacitor2μF/450Vac for electric motors, running capacitor. The external construction of the capacitors is in cylindrical container with PVC sheath and electrical connection by means of terminals. Mechanical fixing by means of threaded shaft and M8 nut. Reference: CBBS 2uF 450VacRepresentative image for illustrative purposes, the item supplied...

Direct mounting terminal block 120-300mm2 thickness 10mm | Adajusa

Connection and assembly material

Direct mounting terminal 120-300mm2 10mm thick plate

SZK300F10

€20.45 (€16.90 tax excl.)

Direct mounting terminal block for cable cross-section 120-300mm2, thickness of the mounting block 10mm.Reference: SZK300F10Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

4uF 450Vac permanent capacitor with CBB60 terminals adajusa

Capacitors for electric motors

Permanent capacitor 3uF 450Vac with terminals

CBBS 3uF450V

€1.85 (€1.53 tax excl.)

Permanent capacitor 3μF/450Vac for electric motors, power capacitor. The external construction of the capacitors is in cylindrical container with PVC sheath and electrical connection through terminals. Mechanical fixing by threaded shaft and M8 nut. reference: CBBS 3uF 450VacRepresentative image for illustrative purposes, the article supplied corresponds...

Capacitors for electric motors

Permanent capacitor 4uF 450Vac with terminals

CBBS 4uF450V

€1.78 (€1.47 tax excl.)

Permanent capacitor 4F/450Vac for electric motors, power capacitor. The external construction of the capacitors is in cylindrical container with PVC cover and electrical connection by terminals. Mechanical fixation by threaded shaft and M8 nut. reference: CBBS 4uF 450VacRepresentative image for illustrative purposes, the supplied article is subject to...

6uF 450Vac permanent capacitor with CBB60 terminals adajusa

Capacitors for electric motors

Permanent capacitor 6uF 450Vac with terminals

CBBS 6uF450V

€2.03 (€1.68 tax excl.)

Permanent capacitor 6F/450Vac for electric motors, power capacitor. The external construction of the capacitors is in cylindrical container with PVC cover and electrical connection by terminals. Mechanical fixation by threaded shaft and M8 nut. reference: CBBS 6uF 450VacRepresentative image for illustrative purposes, the supplied article is subject to...

8uF 450Vac permanent capacitor with CBB60 terminals adajusa

Capacitors for electric motors

Permanent capacitor 8uF 450Vac with terminals

CBBS 8uF450V

€2.72 (€2.25 tax excl.)

Permanent capacitor 8F/450Vac for electric motors, power capacitor. The external construction of the capacitors is in cylindrical container with PVC cover and electrical connection by terminals. Mechanical fixation by threaded shaft and M8 nut. reference: CBBS 8uF 450VacRepresentative image for illustrative purposes, the supplied article is subject to...

12uF 450Vac permanent capacitor with CBB60 terminals adajusa

Capacitors for electric motors

Permanent capacitor 12uF 450Vac with terminals

CBBS 12uF450V

€3.18 (€2.63 tax excl.)

Permanent capacitor 12oF/450Vac for electric motors, power capacitor. The external construction of the capacitors is in cylindrical container with PVC cover and electrical connection by terminals. Mechanical fixation by threaded shaft and M8 nut. Reference: CBBS 12uF 450VacRepresentative image for illustrative purposes, the supplied article is subject...

14uF 450Vac permanent capacitor with CBB60 terminals adajusa

Capacitors for electric motors

Permanent capacitor 14uF 450Vac with terminals

CBBS 14uF450V

€3.67 (€3.03 tax excl.)

Permanent capacitor 14F/450Vac for electric motors, power capacitor. The external construction of the capacitors is in cylindrical container with PVC cover and electrical connection by terminals. Mechanical fixation by threaded shaft and M8 nut. reference: CBBS 14uF 450VacRepresentative image for illustrative purposes, the supplied article is subject to...

16uF 450Vac permanent capacitor with CBB60 terminals adajusa

Capacitors for electric motors

Permanent capacitor 16uF 450Vac with terminals

CBBS 16uF450V

€3.42 (€2.83 tax excl.)

Permanent capacitor 16F/450Vac for electric motors, power capacitor. The external construction of the capacitors is in cylindrical container with PVC cover and electrical connection by terminals. Mechanical fixation by threaded shaft and M8 nut. reference: CBBS 16uF 450VacRepresentative image for illustrative purposes, the supplied article is subject to...

Capacitors for electric motors

Permanent capacitor 18uF 450Vac with terminals

CBBS 18uF450V

€2.86 (€2.36 tax excl.)

Permanent capacitor18μF/450Vac for electric motors, running capacitor. The external construction of the capacitors is in cylindrical container with PVC sheath and electrical connection by means of terminals. Mechanical fixing by means of threaded shaft and M8 nut. Reference: CBBS 18uF 450VacRepresentative image for illustrative purposes, the item...

20uF 450Vac permanent capacitor with CBB60 terminals adajusa

Capacitors for electric motors

Permanent capacitor 20uF 450Vac with terminals

CBBS 20uF450V

€3.74 (€3.09 tax excl.)

Permanent capacitor 20F/450Vac for electric motors, power capacitor. The external construction of the capacitors is in cylindrical container with PVC cover and electrical connection by terminals. Mechanical fixation by threaded shaft and M8 nut. reference: CBBS 20uF 450VacRepresentative image for illustrative purposes, the supplied article is subject to...

25uF 450Vac permanent capacitor with CBB60 terminals adajusa

Capacitors for electric motors

Permanent capacitor 25uF 450Vac with terminals

CBBS 25uF450V

€3.91 (€3.23 tax excl.)

Permanent capacitor 25F/450Vac for electric motors, power capacitor. The external construction of the capacitors is in cylindrical container with PVC cover and electrical connection by terminals. Mechanical fixation by threaded shaft and M8 nut. reference: CBBS 25uF 450VacRepresentative image for illustrative purposes, the supplied article is subject to...

Crimper for fork terminals PR-1 from 1.5 to 10mm2 | ADAJUSA

Crimper for fork terminals PR-1 from 1.5 to 10mm2 | ADAJUSA 2

Tools

Fork terminal crimper from 1.5 to 10mm2

PR-1

€11.76 (€9.72 tax excl.)

Fork terminal crimper, with non-slip PVC handle and high-quality steel jaw, suitable for crimping fork terminals with cable sections from 1.5 to 10mm 2 . Adjustable pressing force. Reference: PR-1 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

30uF 450Vac permanent capacitor with CBB60 terminals adajusa

Capacitors for electric motors

Permanent capacitor 30uF 450Vac with terminals

CBBS 30uF450V

€4.85 (€4.01 tax excl.)

Permanent capacitor 30F/450Vac for electric motors, power capacitor. The external construction of the capacitors is in cylindrical container with PVC cover and electrical connection by terminals. Mechanical fixation by threaded shaft and M8 nut. reference: CBBS 30uF 450VacRepresentative image for illustrative purposes, the supplied article is subject to...

crimping machine terminals 25 to 150mm2 PR-4

crimping machine terminals 25 to 150mm2 PR-4 2

Tools

Terminal crimper copper terminals from 25 to 150 mm2

PR-4

€154.11 (€127.36 tax excl.)

Swivel head crimping tool for copper terminals, with non-slip PVC handle and high quality steel clamp , suitable for crimping non-insulated terminals with cable cross section from 25 to 150 mm 2 . Adjustable crimping force. Reference: PR-4 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

35uF 450Vac permanent capacitor with CBB60 terminals adajusa

Capacitors for electric motors

Permanent capacitor 35uF 450Vac with terminals

CBBS 35uF450V

€4.78 (€3.95 tax excl.)

Permanent capacitor 35F/450Vac for electric motors, power capacitor. The external construction of the capacitors is in cylindrical container with PVC cover and electrical connection by terminals. Mechanical fixation by threaded shaft and M8 nut. reference: CBBS 35uF 450VacRepresentative image for illustrative purposes, the supplied article is subject to...

Crimper for faston terminals PR-AS from 0.5 to 6mm2 | ADAJUSA

Crimper for faston terminals PR-AS from 0.5 to 6mm2 | ADAJUSA 2

Tools

Faston terminal crimper from 0.5 to 6mm2

PR-AS

€14.18 (€11.72 tax excl.)

Crimping tool for faston terminals, with non-slip PVC handle and high-quality steel jaw, suitable for crimping faston terminals with cable sections from 0.5 to 6 mm 2 . Adjustable pressing force. Reference: PR-ASRepresentative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

40uF 450Vac permanent capacitor with CBB60 terminals adajusa

Capacitors for electric motors

Permanent capacitor 40uF 450Vac with terminals

CBBS 40uF450V

€5.24 (€4.33 tax excl.)

Permanent capacitor 40F/450Vac for electric motors, power capacitor. The external construction of the capacitors is in cylindrical container with PVC cover and electrical connection by terminals. Mechanical fixation by threaded shaft and M8 nut. reference: CBBS 40uF 450VacRepresentative image for illustrative purposes, the supplied article is subject to...

Capacitors for electric motors

Permanent capacitor 45uF 450Vac with terminals

CBBS 45uF450V

€5.26 (€4.35 tax excl.)

Permanent capacitor45μF/450Vac for electric motors, running capacitor. The external construction of the capacitors is in cylindrical container with PVC sheath and electrical connection by means of terminals. Mechanical fixing by means of threaded shaft and M8 nut. Reference: CBBS 45uF 450VacRepresentative image for illustrative purposes, the item...

50uF 450Vac permanent capacitor with CBB60 terminals adajusa

Capacitors for electric motors

Permanent capacitor 50uF 450Vac with terminals

CBBS 50uF450V

€6.04 (€4.99 tax excl.)

Permanent capacitor 50F/450Vac for electric motors, power capacitor. The external construction of the capacitors is in cylindrical container with PVC cover and electrical connection by terminals. Mechanical fixation by threaded shaft and M8 nut. reference: CBBS 50uF 450VacRepresentative image for illustrative purposes, the supplied article is subject to...

Capacitors for electric motors

Permanent capacitor 60uF 450Vac with terminals

CBBS 60uF450V

€6.74 (€5.57 tax excl.)

Permanent capacitor60μF/450Vac for electric motors, running capacitor. The external construction of the capacitors is in cylindrical container with PVC sheath and electrical connection by means of terminals. Mechanical fixing by means of threaded shaft and M8 nut. Reference: CBBS 60uF 450VacRepresentative image for illustrative purposes, the item...

70uF 450Vac permanent capacitor with CBB60 terminals adajusa

Capacitors for electric motors

Permanent capacitor 70uF 450Vac with terminals

CBBS 70uF450V

€7.30 (€6.03 tax excl.)

Permanent capacitor 70F/450Vac for electric motors, power capacitor. The external construction of the capacitors is in cylindrical container with PVC cover and electrical connection by terminals. Mechanical fixation by threaded shaft and M8 nut. reference: CBBS 70uF 450VacRepresentative image for illustrative purposes, the supplied article is subject to...

80uF 450Vac permanent capacitor with CBB60 terminals adajusa

Capacitors for electric motors

Permanent capacitor 80uF 450Vac with terminals

CBBS 80uF450V

€8.14 (€6.73 tax excl.)

Permanent capacitor 80F/450Vac for electric motors, power capacitor. The external construction of the capacitors is in cylindrical container with PVC cover and electrical connection by terminals. Mechanical fixation by threaded shaft and M8 nut. reference: CBBS 80uF 450VacRepresentative image for illustrative purposes, the supplied article is subject to...

Motor guard circuit breaker 25 to 40 A. MCB circuit breaker

Motor guard circuit breaker 25 to 40 A. MCB circuit breaker 2

Motor guard circuit breakers motor protection

Motor circuit breaker 25 to 40A

MOV3-40

€73.11 (€60.42 tax excl.)

Three-phase Motor circuit breaker for protection of electric motors. The regulation of the motor protection circuit breaker is between 25 and 40A. The installation of a motor protection circuit breaker prevents the breakdown of electric motors, both single-phase and three-phase, due to overload or failure of a phase in the motor control circuit.Reference:...

View

Digital Multimeter NMM830 Mini Adajusa 2

Measuring instruments

Digital Multimeter NMM830 CAT III 600V

NMM830 mini

€12.57 (€10.39 tax excl.)

Pocket digital multimeter CAT III 600V, for measurement of direct and alternating voltage, direct current, resistance, diode test and continuity. Ideal for use in labs, home and other basic applications. Reference: NMM830 Mini

Measuring instruments

NMM91 CAT III 600V TRMS Clamp

NMM91

€27.43 (€22.67 tax excl.)

True RMS Clamp with CAT III 600V measurement category, for measuring direct and alternating voltage, alternating current, resistance, diode testing, continuity and non-contact voltage detection (NVC). 3 1/2 digit backlit display. Reference: NMM91 Representative image for illustrative purposes, the item supplied will correspond to the specifications...

Metal cabinets and envelopes

Analog thermostat closed contact

NTF

€9.53 (€7.88 tax excl.)

Analogthermostat with closed contact, DIN rail mounting, suitable for temperature regulation inside electrical cabinets and similar. Wide temperature range, between 0º and 60ºC. Very compact size and simple installation. Very good switching characteristics. Part number: NTF Representative image for illustrative purposes, the item supplied will...

Analog thermostat open contact - ADAJUSA

Metal cabinets and envelopes

Analog thermostat open contact

NTH

€9.53 (€7.88 tax excl.)

Analog thermostat with open contact, DIN rail mount, suitable for temperature regulation inside electrical cabinets and the like. Wide temperature range, between 0o and 60oC. Very compact size and simple installation. Very good switching characteristics. Ref: NTH

Metal cabinets and envelopes

Heating resistor for electrical cabinets 30W 230V

FT151-30

€15.54 (€12.84 tax excl.)

30W heating resistor suitable for regulation, temperature and humidity control inside cabinets and electrical panels.PTC resistor with temperature limiter. Quick connection by means of snap terminals, with DIN rail mounting clip. Part number: FT151-30 Representative image for illustrative purposes, the item supplied will correspond to the...

Metal cabinets and envelopes

Heating resistor for electrical cabinets 50W 230V

FT151-50

€18.00 (€14.88 tax excl.)

50W heating resistor suitable for regulation, temperature and humidity control inside cabinets and electrical panels.PTC resistor with temperature limiter. Quick connection by means of snap terminals, with DIN rail mounting clip. Part number: FT151-50 Representative image for illustrative purposes, the item supplied will correspond to the...

Metal cabinets and envelopes

Heating resistor for electrical cabinets 75W 230V

FT151-75

€26.06 (€21.54 tax excl.)

75W heating resistor suitable for regulation, temperature and humidity control inside cabinets and electrical panels.PTC resistor with temperature limiter. Quick connection by means of snap terminals, with DIN rail mounting clip. Part number: FT151-75 Representative image for illustrative purposes, the item supplied will correspond to the...

Metal cabinets and envelopes

Heating resistor for electrical cabinets 100W 230V

FT151-100

€27.98 (€23.12 tax excl.)

100W heating resistor suitable for regulation, temperature and humidity control inside cabinets and electrical panels.PTC resistor with temperature limiter. Quick connection by means of snap terminals, with DIN rail mounting clip. Part number: FT151-100 Representative image for illustrative purposes, the item supplied will correspond to the...

Metal cabinets and envelopes

Heating resistor for electrical cabinets 150W 230V

FT151-150

€34.91 (€28.85 tax excl.)

150W heating resistor suitable for regulation, temperature and humidity control inside cabinets and electrical panels.PTC resistor with temperature limiter. Quick connection by means of snap terminals, with DIN rail mounting clip. Part number: FT151-150 Representative image for illustrative purposes, the item supplied will correspond to the...

Metal cabinets and envelopes

Heating resistor for electrical cabinets 250W 230V

FT401-250

€78.48 (€64.86 tax excl.)

250W heating resistor suitable for regulation, temperature and humidity control inside cabinets and electrical panels. Equipped with axial ball bearing fan.PTC resistor with temperature limiter. Quick connection by means of snap terminals, with DIN rail mounting clip. Includes protection against overheating causing automatic shutdown in case of fan...

Metal cabinets and envelopes

Heating resistor for electrical cabinets 400W 230V

FT401-400

€103.88 (€85.85 tax excl.)

400W heating resistor suitable for regulation, temperature and humidity control inside cabinets and electrical panels. Equipped with axial ball bearing fan.PTC resistor with temperature limiter. Quick connection by means of snap terminals, with DIN rail mounting clip. Includes protection against overheating causing automatic shutdown in case of fan...

Metal cabinets and envelopes

Heating resistor for electrical cabinets 500W 230V

FT401-500

€92.06 (€76.08 tax excl.)

500W heating resistor suitable for regulation, temperature and humidity control inside cabinets and electrical panels. Equipped with axial ball bearing fan.PTC resistor with temperature limiter. Quick connection by means of snap terminals, with DIN rail mounting clip. Includes protection against overheating causing automatic shutdown in case of fan...

View

MCB circuit breaker 2 poles 16A OMU adajusa OMB06216C

MCB circuit breakers 2 poles

Circuit breaker 2 poles 16A curve C - OMU

OMB06216C

€4.63 (€3.83 tax excl.)

MCB circuit breaker 2 poles 16A curve C, for protection against short circuits and overloads in single-phase or biphasic installations. With an assigned cutting power of 6000A. Active protection of both poles with individual status indication. Protects both drivers. It can be used in installations and assemblies up to 500VAC. Manufacturer's Reference:...

MCB circuit breaker 2 poles 1A OMU adajusa OMB06201C

MCB circuit breakers 2 poles

Circuit breaker 2 poles 1A curve C - OMU

OMB06201C

€4.17 (€3.45 tax excl.)

MCB circuit breaker 2 poles 1A curve C, for protection against short circuits and overloads in single-phase or biphasic installations. With an assigned cutting power of 6000A. Active protection of both poles with individual status indication. Protects both drivers. It can be used in installations and assemblies up to 500VAC. Manufacturer's Reference:...

MCB circuit breaker 2 poles 2A OMU adajusa OMB06202C

MCB circuit breakers 2 poles

Circuit breaker 2 poles 2A curve C - OMU

OMB06202C

€4.17 (€3.45 tax excl.)

MCB circuit breaker 2 poles 2A curve C, for protection against short circuits and overloads in single-phase or biphasic installations. With an assigned cutting power of 6000A. Active protection of both poles with individual status indication. Protects both drivers. It can be used in installations and assemblies up to 500VAC. Manufacturer's Reference:...

MCB circuit breaker 2 poles 4A OMU adajusa OMB06204C

MCB circuit breakers 2 poles

Circuit breaker 2 poles 4A curve C - OMU

OMB06204C

€4.21 (€3.48 tax excl.)

MCB circuit breaker 2 poles 4A curve C, for protection against short circuits and overloads in single-phase or biphasic installations. With an assigned cutting power of 6000A. Active protection of both poles with individual status indication. Protects both drivers. It can be used in installations and assemblies up to 500VAC. Manufacturer's Reference:...

Metal cabinets and envelopes

Ventilation grille with filter 120x120mm

KSZ-120

€5.32 (€4.40 tax excl.)

Grille with 120x120mm ventilation filter. Gray. Reference: KSZ-120 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

MCB circuit breaker 2 poles 10A OMU adajusa OMB06210C

MCB circuit breakers 2 poles

Circuit breaker 2 poles 10A curve C - OMU

OMB06210C

€4.17 (€3.45 tax excl.)

MCB circuit breaker 2 poles 10A curve C, for protection against short circuits and overloads in single-phase or biphasic installations. With an assigned cutting power of 6000A. Active protection of both poles with individual status indication. Protects both drivers. It can be used in installations and assemblies up to 500VAC. Manufacturer's Reference:...

Metal cabinets and envelopes

Ventilation grille with filter 152x152mm

KSZ-152

€6.27 (€5.18 tax excl.)

Grille with 152x152mm ventilation filter. Gray. Reference: KSZ-152 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

MCB circuit breaker 2 poles 20A OMU adajusa OMB06220C

MCB circuit breakers 2 poles

Circuit breaker 2 poles 20A curve C - OMU

OMB06220C

€4.17 (€3.45 tax excl.)

MCB circuit breaker 2 poles 20A curve C, for protection against short circuits and overloads in single-phase or biphasic installations. With an assigned cutting power of 6000A. Active protection of both poles with individual status indication. Protects both drivers. It can be used in installations and assemblies up to 500VAC. Manufacturer's Reference:...

Tools

Cutting tool for cable up to 60 mm2

KV-1

€11.12 (€9.19 tax excl.)

Manual cutting tool for copper and aluminum cables up to 60mm². Light weight and ergonomic handle for correct handling and precise cable cutting. Part number: KV-1 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

View

Metal cabinets and envelopes

Ventilation grille with filter 255x255mm

KSZ-255

€14.16 (€11.70 tax excl.)

Grille with filter for ventilation of 255x255mm. Gray. Reference: KSZ-255 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

View

MCB circuit breaker 2 poles 25A OMU adajusa OMB06225C

MCB circuit breakers 2 poles

Circuit breaker 2 poles 25A curve C - OMU

OMB06225C

€4.63 (€3.83 tax excl.)

MCB circuit breaker 2 poles 25 curve C, for protection against short circuits and overloads in single or biphasic installations. With an assigned cutting power of 6000A. Active protection of both poles with individual status indication. Protects both drivers. It can be used in installations and assemblies up to 500VAC. Manufacturer's Reference:...

Terminal mounting accessories

Side stop for DIN rail terminals

EW35

€0.17 (€0.14 tax excl.)

Side stop for terminals mounting on din-rail.Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Metal cabinets and envelopes

Ventilation grille with filter 323x323mm

KSZ-323

€23.66 (€19.55 tax excl.)

Grille with filter for ventilation of 323x323mm. Gray. Reference: KSZ-323 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

MCB circuit breaker 2 poles 32A OMU adajusa OMB06232C

MCB circuit breakers 2 poles

Circuit breaker 2 poles 32A curve C - OMU

OMB06232C

€4.17 (€3.45 tax excl.)

MCB circuit breaker 2 poles 32 curve C, for protection against short circuits and overloads in single-phase or biphasic installations. With an assigned cutting power of 6000A. Active protection of both poles with individual status indication. Protects both drivers. It can be used in installations and assemblies up to 500VAC. Manufacturer's Reference:...

Metal cabinets and envelopes

Ventilation grille with filter and fan 120x120 mm

FAN-120

€22.24 (€18.38 tax excl.)

120x120 mm outlet filter with mounted fan and 230Vac operating voltage. Gray. Reference: FAN-120 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

MCB circuit breaker 2 poles 40A OMU adajusa OMB06240C

MCB circuit breakers 2 poles

Circuit breaker 2 poles 40A curve C - OMU

OMB06240C

€4.21 (€3.48 tax excl.)

MCB circuit breaker 2 poles 40 curve C, for protection against short circuits and overloads in single-phase or biphasic installations. With an assigned cutting power of 6000A. Active protection of both poles with individual status indication. Protects both drivers. It can be used in installations and assemblies up to 500VAC. Manufacturer's Reference:...

Metal cabinets and envelopes

Ventilation grille with filter and fan 152x152mm

FAN-152

€24.49 (€20.24 tax excl.)

152x152 mm output filter with mounted fan and 230Vac operating voltage. Gray. Reference: FAN-152 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

MCB circuit breaker 2 poles 50A OMU adajusa OMB06250C

MCB circuit breakers 2 poles

Circuit breaker 2 poles 50A curve C - OMU

OMB06250C

€4.21 (€3.48 tax excl.)

MCB circuit breaker 2 poles 50 curve C, for protection against short circuits and overloads in single-phase or biphasic installations. With an assigned cutting power of 6000A. Active protection of both poles with individual status indication. Protects both drivers. It can be used in installations and assemblies up to 500VAC. Manufacturer's Reference:...

Metal cabinets and envelopes

Ventilation grille with filter and fan 204x204 mm

FAN-204/170

€44.04 (€36.40 tax excl.)

204x204 mm outlet filter with mounted fan and 230Vac operating voltage. Gray. Reference: FAN-204/170 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

MCB circuit breaker 2 poles 63A OMU adajusa OMB06263C

MCB circuit breakers 2 poles

Circuit breaker 2 poles 63A curve C - OMU

OMB06263C

€4.21 (€3.48 tax excl.)

MCB circuit breaker 2 poles 63 curve C, for protection against short circuits and overloads in single-phase or biphasic installations. With an assigned cutting power of 6000A. Active protection of both poles with individual status indication. Protects both drivers. It can be used in installations and assemblies up to 500VAC. Manufacturer's Reference:...

Metal cabinets and envelopes

Ventilation grille with filter and fan 255x255/180 mm

FAN-255/180

€67.35 (€55.66 tax excl.)

255x255 mm outlet filter with mounted fan and 230Vac operating voltage. Gray. Reference: FAN-255/180 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Metal cabinets and envelopes

Ventilation grille with filter and fan 255x255/200 mm

FAN-255/200

€79.00 (€65.29 tax excl.)

255x255 mm output filter with mounted fan and operating voltage 230Vac. Grey. Reference: FAN-255/200

Metal cabinets and envelopes

Ventilation grille with filter and fan 323x323 mm

FAN-323

€171.20 (€141.49 tax excl.)

323x323 mm outlet filter with mounted fan and 230Vac operating voltage. Gray. Reference: FAN-323 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Copper tubular terminal 2.5 mm2 hole 4 mm ADAJUSA

Copper terminals

2.5 mm2 copper tubular terminal for 4 mm hole

MSC-2,5/4,2

€0.12 (€0.10 tax excl.)

Tinned copper tubular terminal for 2.5 mm 2 section cable and 4 mm hole diameter, manufactured according to IEC 61238-1 standard. Its design guarantees easy insertion of the cable by adjusting securely around it. Reference: MSC-2.5 2.5/4.2 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Copper tubular terminal 2.5 mm2 hole 5 mm ADAJUSA

Copper terminals

2.5 mm2 copper tubular terminal for 5 mm hole

MSC-2,5/5,2

€0.12 (€0.10 tax excl.)

Tinned copper tubular terminal for 2.5 mm 2 section cable and 5 mm hole diameter, manufactured according to IEC 61238-1 standard. Its design guarantees easy insertion of the cable by adjusting securely around it. Reference: MSC-2.5 2.5/5.2 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Tubular copper terminal 2.5 mm2 hole 6 mm ADAJUSA

Copper terminals

2.5 mm2 copper tubular terminal for 6 mm hole

MSC-2,5/6,2

€0.12 (€0.10 tax excl.)

Tinned copper tubular terminal for 2.5 mm 2 section cable and 6 mm hole diameter, manufactured according to IEC 61238-1 standard. Its design guarantees easy insertion of the cable by adjusting securely around it. Reference: MSC-2.5 2.5/6.2 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Copper terminals

Copper tubular terminal4 mm2 for 5 mm hole

MSC-4/5,2

€0.16 (€0.13 tax excl.)

Tinned copper tubular terminal for 4 mm 2 section cable and 5 mm hole diameter, manufactured according to IEC 61238-1 standard. Its design guarantees easy insertion of the cable by adjusting securely around it. Reference: MSC-4 4/5.2 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

4 mm2 copper tubular terminal for 6 mm hole

Copper terminals

Copper tubular terminal 4 mm2 for 6 mm hole

MSC-4/6,2

€0.16 (€0.13 tax excl.)

Tinned copper tubular terminal for cable with a 4 mm 2 section and a 6 mm hole diameter, manufactured according to IEC 61238-1 standard. Its design guarantees easy insertion of the cable by adjusting securely around it. Reference: MSC-4 4/6.2 Representative image for illustrative purposes, the supplied article will correspond to the indicated...

6 mm2 copper tubular terminal for 5 mm hole

Copper terminals

Copper tubular terminal 6 mm2 for 5 mm hole

MSC-6/5,2

€0.16 (€0.13 tax excl.)

Tinned copper tubular terminal for 6 mm 2 section cable and 5 mm hole diameter, manufactured according to IEC 61238-1 standard. Its design guarantees easy insertion of the cable by adjusting securely around it. Reference: MSC-6 6/5.2 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

6 mm2 copper tubular terminal for 6 mm hole

Copper terminals

Copper tubular terminal 6 mm2 for 6 mm hole

MSC-6/6,2

€0.16 (€0.13 tax excl.)

Tinned copper tubular terminal for 6 mm 2 section cable and 6 mm hole diameter, manufactured according to IEC 61238-1 standard. Its design guarantees easy insertion of the cable by adjusting securely around it. Reference: MSC-6 6/6.2 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

6 mm2 copper tubular terminal for 8 mm hole

Copper terminals

Copper tubular terminal 6 mm2 for 8 mm hole

MSC-6/8,2

€0.16 (€0.13 tax excl.)

Tinned copper tubular terminal for 6 mm 2 section cable and 8 mm hole diameter, manufactured according to IEC 61238-1 standard. Its design guarantees easy insertion of the cable by adjusting securely around it. Reference: MSC-6 6/8.2 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Tubular copper terminal 10 mm2 hole 6 mm

Copper terminals

Copper tubular terminal 10 mm2 for 6 mm hole

MSC-10/6,2

€0.18 (€0.15 tax excl.)

Tinned copper tubular terminal for 10 mm 2 section cable and 6 mm hole diameter, manufactured according to IEC 61238-1 standard. Its design guarantees easy insertion of the cable by adjusting securely around it. Reference: MSC-10 10/6.2 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Tubular copper terminal 10 mm2 hole 8 mm

Copper terminals

Copper tubular terminal 10 mm2 for 8 mm hole

MSC-10/8,2

€0.18 (€0.15 tax excl.)

Tinned copper tubular terminal for 10 mm 2 section cable and 8 mm hole diameter, manufactured according to IEC 61238-1 standard. Its design guarantees easy insertion of the cable by adjusting securely around it. Reference: MSC-10 10/8.2 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Tubular copper terminal 16 mm2 hole 6 mm

Copper terminals

Copper tubular terminal 16 mm2 for 6 mm hole

MSC-16/6,2

€0.24 (€0.20 tax excl.)

Tinned copper tubular terminal for 16 mm 2 section cable and 6 mm hole diameter, manufactured according to IEC 61238-1 standard. Its design guarantees easy insertion of the cable by adjusting securely around it. Reference: MSC-16 16/6.2 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Tubular copper terminal 16 mm2 hole 8 mm

Copper terminals

Copper tubular terminal 16 mm2 for 8 mm hole

MSC-16/8,2

€0.24 (€0.20 tax excl.)

Tinned copper tubular terminal for 16 mm 2 section cable and 8 mm hole diameter, manufactured according to IEC 61238-1 standard. Its design guarantees easy insertion of the cable by adjusting securely around it. Reference: MSC-16 16/8.2 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Tubular copper terminal 16 mm2 hole 10 mm

Copper terminals

Copper tubular terminal 16 mm2 for 10 mm hole

MSC-16/10,5

€0.24 (€0.20 tax excl.)

Tinned copper tubular terminal for 16 mm 2 section cable and 10 mm hole diameter, manufactured according to IEC 61238-1 standard. Its design guarantees easy insertion of the cable by adjusting securely around it. Reference: MSC-16 16/10.5 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Copper terminals

25 mm2 copper tubular terminal for 6 mm hole

MSC-25/6,2

€0.30 (€0.25 tax excl.)

Tinned copper tubular terminal for 25 mm 2 section cable and 6 mm hole diameter, manufactured according to IEC 61238-1 standard. Its design guarantees easy insertion of the cable by adjusting securely around it. Reference: MSC-25 25/6.2 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Appliques and luminous elements

LED Magnetic Cabinet Lighting

SZV25

€37.15 (€30.70 tax excl.)

Luminaire with LED technology for electrical cabinets , long life without maintenance. Easy installation using magnets. It incorporates an electric switch and is prepared for chain assembly. Supply voltage 48-265 Vac/dc. Reference: SZV25 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Tubular copper terminal 25 mm2 hole 8 mm ADAJUSA

Copper terminals

25 mm2 copper tubular terminal for 8 mm hole

MSC-25/8,2

€0.30 (€0.25 tax excl.)

Tinned copper tubular terminal for 25 mm 2 section cable and 8 mm hole diameter, manufactured according to IEC 61238-1 standard. Its design guarantees easy insertion of the cable by adjusting securely around it. Reference: MSC-25 25/8.2 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Tubular copper terminal 25 mm2 hole 10 mm ADAJUSA

Copper terminals

25 mm2 copper tubular terminal for 10 mm hole

MSC-25/10,5

€0.30 (€0.25 tax excl.)

Tinned copper tubular terminal for 25 mm 2 section cable and 10 mm hole diameter, manufactured according to IEC 61238-1 standard. Its design guarantees easy insertion of the cable by adjusting securely around it. Reference: MSC-25 25/10.5 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Tubular copper terminal 35 mm2 hole 6 mm ADAJUSA

Copper terminals

35 mm2 copper tubular terminal for 6 mm hole

MSC-35/6,2

€0.42 (€0.35 tax excl.)

Tinned copper tubular terminal for 35 mm 2 section cable and 6 mm hole diameter, manufactured according to IEC 61238-1 standard. Its design guarantees easy insertion of the cable by adjusting securely around it. Reference: MSC-35 35/6.2 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Tubular copper terminal 35 mm2 hole 8 mm ADAJUSA

Copper terminals

35 mm2 copper tubular terminal for 8 mm hole

MSC-35/8,2

€0.42 (€0.35 tax excl.)

Tinned copper tubular terminal for 35 mm 2 section cable and 8 mm hole diameter, manufactured according to IEC 61238-1 standard. Its design guarantees easy insertion of the cable by adjusting securely around it. Reference: MSC-35 35/8.2 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Tubular copper terminal 35 mm2 hole 10 mm ADAJUSA

Copper terminals

35 mm2 copper tubular terminal for 10 mm hole

MSC-35/10,5

€0.42 (€0.35 tax excl.)

Tinned copper tubular terminal for 35 mm 2 section cable and 10 mm hole diameter, manufactured according to IEC 61238-1 standard. Its design guarantees easy insertion of the cable by adjusting securely around it. Reference: MSC-35 35/10.5 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Tubular copper terminal 35 mm2 hole 12 mm ADAJUSA

Copper terminals

35 mm2 copper tubular terminal for 12 mm hole

MSC-35/12,5

€0.42 (€0.35 tax excl.)

Tinned copper tubular terminal for 35 mm 2 section cable and 12 mm hole diameter, manufactured according to IEC 61238-1 standard. Its design guarantees easy insertion of the cable by adjusting securely around it. Reference: MSC-35 35/12.5 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

MCB circuit breaker 3 poles 6A OMU adajusa OMB06306C

MCB circuit breakers 3 poles

Circuit breaker 3 poles 6A curve C - OMU

OMB06306C

€6.97 (€5.76 tax excl.)

MCB circuit breaker 3 poles 6A curve C, for protection against short circuits and overloads in three-phase installations. With an assigned cutting power of 6000A. Protects both drivers. It can be used in installations and assemblies up to 500VAC. Manufacturer's Reference: OMB06306C Representative image for illustrative purposes, the supplied article is...

Tubular copper terminal 50 mm2 hole 8 mm ADAJUSA

Copper terminals

50 mm2 copper tubular terminal for 8 mm hole

MSC-50/8,2

€0.96 (€0.79 tax excl.)

Tinned copper tubular terminal for 50 mm 2 section cable and 8 mm hole diameter, manufactured according to IEC 61238-1 standard. Its design guarantees easy insertion of the cable by adjusting securely around it. Reference: MSC-50 50/8.2 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

MCB circuit breaker 3 poles 1A OMU adajusa OMB06301C

MCB circuit breakers 3 poles

Circuit breaker 3 poles 1A curve C - OMU

OMB06301C

€6.97 (€5.76 tax excl.)

MCB circuit breaker 3 poles 1A curve C, for protection against short circuits and overloads in three-phase installations. With an assigned cutting power of 6000A. Protects both drivers. It can be used in installations and assemblies up to 500VAC. Manufacturer's Reference: OMB06301C Representative image for illustrative purposes, the supplied article is...

Tubular copper terminal 50 mm2 hole 10 mm ADAJUSA

Copper terminals

50 mm2 copper tubular terminal for 10 mm hole

MSC-50/10,5

€0.96 (€0.79 tax excl.)

Tinned copper tubular terminal for 50 mm 2 section cable and 10 mm hole diameter, manufactured according to IEC 61238-1 standard. Its design guarantees easy insertion of the cable by adjusting securely around it. Reference: MSC-50 50/10.5 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

MCB circuit breaker 3 poles 2A OMU adajusa OMB06302C

MCB circuit breakers 3 poles

Circuit breaker 3 poles 2A curve C - OMU

OMB06302C

€6.97 (€5.76 tax excl.)

MCB circuit breaker 3 poles 2A curve C, for protection against short circuits and overloads in three-phase installations. With an assigned cutting power of 6000A. Protects both drivers. It can be used in installations and assemblies up to 500VAC. Manufacturer's Reference: OMB06302C Representative image for illustrative purposes, the supplied article is...

Tubular copper terminal 50 mm2 hole 12 mm ADAJUSA

Copper terminals

50 mm2 copper tubular terminal for 12 mm hole

MSC-50/12,5

€0.96 (€0.79 tax excl.)

Tinned copper tubular terminal for 50 mm 2 section cable and 12 mm hole diameter, manufactured according to IEC 61238-1 standard. Its design guarantees easy insertion of the cable by adjusting securely around it. Reference: MSC-50 50/12.5 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

MCB circuit breaker 3 poles 4A OMU adajusa OMB06304C

MCB circuit breakers 3 poles

Circuit breaker 3 poles 4A curve C - OMU

OMB06304C

€6.97 (€5.76 tax excl.)

MCB circuit breaker 3 poles 4A curve C, for protection against short circuits and overloads in three-phase installations. With an assigned cutting power of 6000A. Protects both drivers. It can be used in installations and assemblies up to 500VAC. Manufacturer's Reference: OMB06304C Representative image for illustrative purposes, the supplied article is...

Tubular copper terminal 70 mm2 hole 8 mm ADAJUSA

Copper terminals

70 mm2 copper tubular terminal for 8 mm hole

MSC-70/8,2

€1.32 (€1.09 tax excl.)

Tinned copper tubular terminal for 70 mm 2 section cable and 8 mm hole diameter, manufactured according to IEC 61238-1 standard. Its design guarantees easy insertion of the cable by adjusting securely around it. Reference: MSC-70 70/8.2 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Tubular copper terminal 70 mm2 hole 10 mm ADAJUSA

Copper terminals

70 mm2 copper tubular terminal for 10 mm hole

MSC-70/10,5

€1.32 (€1.09 tax excl.)

Tinned copper tubular terminal for 70 mm 2 section cable and 10 mm hole diameter, manufactured according to IEC 61238-1 standard. Its design guarantees easy insertion of the cable by adjusting securely around it. Reference: MSC-70 70/10.5 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Tubular copper terminal 70 mm2 hole 12 mm ADAJUSA

Copper terminals

70 mm2 copper tubular terminal for 12 mm hole

MSC-70/12,5

€1.32 (€1.09 tax excl.)

Tinned copper tubular terminal for 70 mm 2 section cable and 12 mm hole diameter, manufactured according to IEC 61238-1 standard. Its design guarantees easy insertion of the cable by adjusting securely around it. Reference: MSC-70 70/12.5 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Tubular copper terminal 95 mm2 hole 10 mm ADAJUSA

Copper terminals

95 mm2 copper tubular terminal for 10 mm hole

MSC-95/10,5

€2.20 (€1.82 tax excl.)

Tinned copper tubular terminal for 95 mm 2 section cable and 10 mm hole diameter, manufactured according to IEC 61238-1 standard. Its design guarantees easy insertion of the cable by adjusting securely around it. Reference: MSC-95 95/10.5 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Tubular copper terminal 95 mm2 hole 12 mm ADAJUSA

Copper terminals

95 mm2 copper tubular terminal for 12 mm hole

MSC-95/12,5

€2.20 (€1.82 tax excl.)

Tinned copper tubular terminal for 95 mm 2 section cable and 12 mm hole diameter, manufactured according to IEC 61238-1 standard. Its design guarantees easy insertion of the cable by adjusting securely around it. Reference: MSC-95 95/12.5 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

MCB circuit breaker 3 poles 32A OMU adajusa OMB06332C

MCB circuit breakers 3 poles

Circuit breaker 3 poles 32A curve C - OMU

OMB06332C

€6.97 (€5.76 tax excl.)

MCB circuit breaker 3 poles 32A curve C, for protection against short circuits and overloads in three-phase installations. With an assigned cutting power of 6000A. Protects both drivers. It can be used in installations and assemblies up to 500VAC. Manufacturer's Reference: OMB06332C Representative image for illustrative purposes, the supplied article...

Tubular copper terminal 120 mm2 hole 12 mm ADAJUSA

Copper terminals

120 mm2 copper tubular terminal for 12 mm hole

MSC-120/12,5

€3.30 (€2.73 tax excl.)

Tinned copper tubular terminal for 120 mm 2 section cable and 12 mm hole diameter, manufactured according to IEC 61238-1 standard. Its design guarantees easy insertion of the cable by adjusting securely around it. Reference: MSC-120 120/12.5 Representative image for illustrative purposes, the supplied article will correspond to the indicated...

MCB circuit breaker 3 poles 40A OMU adajusa OMB06340C

MCB circuit breakers 3 poles

Circuit breaker 3 poles 40A curve C - OMU

OMB06340C

€6.97 (€5.76 tax excl.)

MCB circuit breaker 3 poles 40A curve C, for protection against short circuits and overloads in three-phase installations. With an assigned cutting power of 6000A. Protects both drivers. It can be used in installations and assemblies up to 500VAC. Manufacturer's Reference: OMB06340C Representative image for illustrative purposes, the supplied article...

Copper tubular terminal 120 mm2 hole 16 mm ADAJUSA

Copper terminals

120 mm2 copper tubular terminal for 16 mm hole

MSC-120/16,5

€3.30 (€2.73 tax excl.)

Tinned copper tubular terminal for 120 mm 2 section cable and 16 mm hole diameter, manufactured according to IEC 61238-1 standard. Its design guarantees easy insertion of the cable by adjusting securely around it. Reference: MSC-120 120/16.5 Representative image for illustrative purposes, the supplied article will correspond to the indicated...

MCB circuit breaker 3 poles 50A OMU adajusa OMB06350C

MCB circuit breakers 3 poles

Circuit breaker 3 poles 50A curve C - OMU

OMB06350C

€6.97 (€5.76 tax excl.)

MCB circuit breaker 3 poles 50A curve C, for protection against short circuits and overloads in three-phase installations. With an assigned cutting power of 6000A. Protects both drivers. It can be used in installations and assemblies up to 500VAC. Manufacturer's Reference: OMB06350C Representative image for illustrative purposes, the supplied article...

Tubular copper terminal 150 mm2 hole 12 mm ADAJUSA

Copper terminals

150 mm2 copper tubular terminal for 12 mm hole

MSC-150/12,5

€3.82 (€3.16 tax excl.)

Tinned copper tubular terminal for 150 mm 2 section cable and 12 mm hole diameter, manufactured according to IEC 61238-1 standard. Its design guarantees easy insertion of the cable by adjusting securely around it. Reference: MSC-150 150/12.5 Representative image for illustrative purposes, the supplied article will correspond to the indicated...

MCB circuit breaker 3 poles 63A OMU adajusa OMB06363C

MCB circuit breakers 3 poles

Circuit breaker 3 poles 63A curve C - OMU

OMB06363C

€6.90 (€5.70 tax excl.)

MCB circuit breaker 3 poles 63A curve C, for protection against short circuits and overloads in three-phase installations. With an assigned cutting power of 6000A. Protects both drivers. It can be used in installations and assemblies up to 500VAC. Manufacturer's Reference: OMB06363C Representative image for illustrative purposes, the supplied article...

Tubular copper terminal 150 mm2 hole 16 mm ADAJUSA

Copper terminals

150 mm2 copper tubular terminal for 16 mm hole

MSC-150/16,5

€3.82 (€3.16 tax excl.)

Tinned copper tubular terminal for 150 mm 2 section cable and 16 mm hole diameter, manufactured according to IEC 61238-1 standard. Its design guarantees easy insertion of the cable by adjusting securely around it. Reference: MSC-150 150/16.5 Representative image for illustrative purposes, the supplied article will correspond to the indicated...

Tubular copper terminal 185 mm2 hole 16 mm ADAJUSA

Copper terminals

185 mm2 copper tubular terminal for 16 mm hole

MSC-185/16,5

€4.59 (€3.79 tax excl.)

Tinned copper tubular terminal for 185 mm 2 section cable and 16 mm hole diameter, manufactured according to IEC 61238-1 standard. Its design guarantees easy insertion of the cable by adjusting securely around it. Reference: MSC-185 185/16.5 Representative image for illustrative purposes, the supplied article will correspond to the indicated...

Tubular copper terminal 240 mm2 hole 16 mm ADAJUSA

Copper terminals

240 mm2 copper tubular terminal for 16 mm hole

MSC-240/16,5

€7.95 (€6.57 tax excl.)

Tinned copper tubular terminal for 240 mm 2 section cable and 16 mm hole diameter, manufactured according to IEC 61238-1 standard. Its design guarantees easy insertion of the cable by adjusting securely around it. Reference: MSC-240 240/16.5 Representative image for illustrative purposes, the supplied article will correspond to the indicated...

Isolators

Barrel type insulator height 30mm M6

SM-30

€0.83 (€0.69 tax excl.)

Barrel type separator insulator, height 30mm, thread M6. Suitable for the separation of all types of copper or aluminum bars.Part no.: SM-30Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated

Isolators

Barrel type insulator height 40mm M8

SM-40

€0.92 (€0.76 tax excl.)

Barrel type separator insulator, height 40mm, thread M8. Suitable for the separation of all types of copper or aluminum bars.Part number: SM-40Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated

Isolators

Barrel type insulator height 51mm M8

SM-51

€0.92 (€0.76 tax excl.)

Barrel type isolator, height 51mm, thread M8. Suitable for the separation of all types of copper or aluminum bars.Part number: SM-51Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated

Isolators

Barrel type insulator height 76mm M10

SM-76

€2.12 (€1.75 tax excl.)

Barrel type separator insulator, height 76mm, thread M10. Suitable for the separation of all types of copper or aluminum bars.Part number: SM-76Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated

19mmx0.15mm Red Insulating Tape 10m Reel

Friction tape

Red Insulating Tape 19mmx0.13mm Reel 10m

1910-R

€0.48 (€0.40 tax excl.)

Self-adhesive PVC insulating tape in red color, high quality, self-extinguishing and synthetic rubber adhesive. The width of the tape is 19mm with a thickness of 0.13mm. Supplied in reels of 10m length. Reference: 1910-R Color: Red Width: 19mm Thickness: 0,13mm Reel length: 10m Representative image for illustrative purposes, the item...

19mmx0.15mm Green Insulating Tape 10m Reel

Friction tape

Green Insulating Tape 19mmx0.13mm Reel 10m

1910-G

€0.48 (€0.40 tax excl.)

Self-adhesive PVC insulating tape in green color, high quality, self-extinguishing and synthetic rubber adhesive. The width of the tape is 19mm with a thickness of 0.13mm. Supplied in reels of 10m length. Reference: 1910-G Color: Green Width: 19mm Thickness: 0,13mm Reel length: 10m Representative image for illustrative purposes, the item...

View

19mmx0.15mm Yellow Insulating Tape 10m Reel

Friction tape

Yellow Insulating Tape 19mmx0.13mm Reel 10m

1910-Y

€0.48 (€0.40 tax excl.)

Self-adhesive PVC insulating tape in yellow color, high quality, self-extinguishing and synthetic rubber adhesive. The width of the tape is 19mm with a thickness of 0.13mm. Supplied in reels of 10m length. Reference: 1910-Y Color: Yellow Width: 19mm Thickness: 0,13mm Reel length: 10m Representative image for illustrative purposes, the item...

19mmx0.15mm Yellow/Green Insulating Tape 10m Reel

Friction tape

Yellow/Green Insulating Tape 19mmx0.13mm Reel10m

1910-ZS

€0.53 (€0.44 tax excl.)

Self-adhesive PVC insulating tape in yellow/green color, high quality, self-extinguishing and synthetic rubber adhesive. The width of the tape is 19mm with a thickness of 0.13mm. Supplied in reels of 10m length. Part number: 1910-ZS Color: Yellow/Green Width: 19mm Thickness: 0,13mm Reel length: 10m Representative image for illustrative...

Blue insulating tape 19mmx0.15mm 10m reel

Friction tape

Blue Insulating Tape 19mmx0.13mm Reel 10m

1910-BL

€0.48 (€0.40 tax excl.)

Self-adhesive PVC insulating tape in blue color, high quality, self-extinguishing and synthetic rubber adhesive. The width of the tape is 19mm with a thickness of 0.13mm. Supplied in reels of 10m length. Part number: 1910-BL Color: Blue Width: 19mm Thickness: 0,13mm Reel length: 10m Representative image for illustrative purposes, the item...

19mmx0.15mm Grey Insulating Tape 10m Reel

Friction tape

Grey Insulating 19mmx0.13mm Tape 10m Reel

1910-GR

€0.48 (€0.40 tax excl.)

Self-adhesive PVC insulating tape in gray color, high quality, self-extinguishing and synthetic rubber adhesive. The width of the tape is 19mm with a thickness of 0.13mm. Supplied in reels of 10m length. Part number: 1910-GR Color: Gray Width: 19mm Thickness: 0,13mm Reel length: 10m Representative image for illustrative purposes, the...

Friction tape

Blue insulating tape 50mmx0,13mm 20m reel

5020-BL

€2.66 (€2.20 tax excl.)

Self-adhesive PVC insulating tape in blue color, high quality, self-extinguishing and synthetic rubber adhesive. The width of the tape is 50mm with a thickness of 0.13mm. Supplied in reels of 20m length. Part number: 5020-BL Color: Blue Width: 50mm Thickness: 0,13mm Length on reel: 20m

MCB circuit breaker 4 poles 6A OMU adajusa OMB06406C

MCB circuit breakers 4 poles

Circuit breaker 4 poles 6A curve C - OMU

OMB06406C

€9.78 (€8.08 tax excl.)

MCB circuit breaker 4 poles 6A curve C, for protection against short circuits and overloads in three-phase installations. With an assigned cutting power of 6000A. Active protection of all poles with individual status indication. Protects both drivers. It can be used in installations and assemblies up to 500VAC. Manufacturer's Reference: OMB06406C...

Friction tape

Red insulating tape 50mmx0,13mm 20m reel

5020-R

€2.66 (€2.20 tax excl.)

Self-adhesive PVC insulating tape in red color, high quality, self-extinguishing and synthetic rubber adhesive. The width of the tape is 50mm with a thickness of 0.13mm. Supplied in reels of 20m length. Reference: 5020-R Color: Red Width: 50mm Thickness: 0,13mm Length on reel: 20m

MCB circuit breaker 4 poles 10A OMU adajusa OMB06410C

MCB circuit breakers 4 poles

Circuit breaker 4 poles 10A curve C - OMU

OMB06410C

€9.78 (€8.08 tax excl.)

MCB circuit breaker 4 poles 10A curve C, for protection against short circuits and overloads in three-phase installations. With an assigned cutting power of 6000A. Active protection of all poles with individual status indication. Protects both drivers. It can be used in installations and assemblies up to 500VAC. Manufacturer's Reference: OMB06410C...

Green insulating tape 50mmx0,13mm reel of 20m | ADAJUSA

Friction tape

Green insulating tape 50mmx0,13mm 20m reel

5020-G

€2.66 (€2.20 tax excl.)

Self-adhesive PVC insulating tape in green color, high quality, self-extinguishing and synthetic rubber adhesive. The width of the tape is 50mm with a thickness of 0.13mm. Supplied in reels of 20m length. Reference: 5020-G Color: Green Width: 50mm Thickness: 0,13mm Length on reel: 20m

Insulating tape yellow/green 50mmx0,13mm 20m spool | ADAJUSA

Friction tape

Insulating tape yellow/green 50mmx0,13mm 20m reel

5020-ZS

€2.93 (€2.42 tax excl.)

Self-adhesive PVC insulating tape in yellow/green color, high quality, self-extinguishing and synthetic rubber adhesive. The width of the tape is 50mm with a thickness of 0.13mm. Supplied in reels of 20m length. Reference: 5020-ZS Color: Yellow/Green Width: 50mm Thickness: 0,13mm Length on reel: 20m

MCB circuit breaker 4 poles 32A OMU adajusa OMB06432C

MCB circuit breakers 4 poles

Circuit breaker 4 poles 32A curve C - OMU

OMB06432C

€9.78 (€8.08 tax excl.)

MCB circuit breaker 4 poles 32A curve C, for protection against short circuits and overloads in three-phase installations. With an assigned cutting power of 6000A. Active protection of all poles with individual status indication. Protects both drivers. It can be used in installations and assemblies up to 500VAC. Manufacturer's Reference: OMB06432C...

Self-Vulcanizing Tape 19mmx0,5mm 10m spool | ADAJUSA

Special tapes

Self-vulcanizing tape 19mmx0,5mm reel of 10m

VSZ19

€4.53 (€3.74 tax excl.)

Black vulcanized or self-vulcanizing tape, 19mm wide and 0.5mm thick, supplied in 10m rolls. Heat-shrinkable or self-weldable tape without adhesive, immediate adhesion by heat application. Ideal for waterproofing and sealing electrical connections.Part number: VSZ19Representative image for illustrative purposes, the item supplied will correspond to the...

MCB circuit breaker 4 poles 40A OMU adajusa OMB06440C

MCB circuit breakers 4 poles

Circuit breaker 4 poles 40A curve C - OMU

OMB06440C

€11.04 (€9.12 tax excl.)

MCB circuit breaker 4 poles 40A curve C, for protection against short circuits and overloads in three-phase installations. With an assigned cutting power of 6000A. Active protection of all poles with individual status indication. Protects both drivers. It can be used in installations and assemblies up to 500VAC. Manufacturer's Reference: OMB06440C...

Self-Vulcanizing Tape 38mmx0,5mm 10m spool | ADAJUSA

Special tapes

Self-vulcanizing tape 38mmx0,5mm 10m reel

VSZ38

€8.12 (€6.71 tax excl.)

Black vulcanized or self-vulcanizing tape, 38mm wide and 0.5mm thick, supplied in 10m rolls. Heat-shrinkable or self-weldable tape without adhesive, immediate adhesion by heat application. Ideal for waterproofing and sealing electrical connections.Part number: VSZ38Representative image for illustrative purposes, the item supplied will correspond to the...

MCB circuit breaker 4 poles 50A OMU adajusa OMB06450C

MCB circuit breakers 4 poles

Circuit breaker 4 poles 50A curve C - OMU

OMB06450C

€11.04 (€9.12 tax excl.)

MCB circuit breaker 4 poles 50A curve C, for protection against short circuits and overloads in three-phase installations. With an assigned cutting power of 6000A. Active protection of all poles with individual status indication. Protects both drivers. It can be used in installations and assemblies up to 500VAC. Manufacturer's Reference: OMB06450C...

Self-Vulcanizing Tape 50mmx1,5mm 3m spool | ADAJUSA

Special tapes

Self-vulcanizing tape 50mmx1,5mm reel of 3m

VSZ50

€9.53 (€7.88 tax excl.)

Vulcanized or self-vulcanizing tape in black color, 50mm wide and 1.5mm thick, supplied in 3m rolls. Heat-shrinkable or self-weldable tape without adhesive, immediate adhesion by heat application. Ideal for waterproofing and sealing electrical connections.Part number: VSZ50Representative image for illustrative purposes, the item supplied will correspond...

MCB circuit breaker 4 poles 63A OMU adajusa OMB06463C

MCB circuit breakers 4 poles

Circuit breaker 4 poles 63A curve C - OMU

OMB06463C

€9.85 (€8.14 tax excl.)

MCB circuit breaker 4 poles 63A curve C, for protection against short circuits and overloads in three-phase installations. With an assigned cutting power of 6000A. Active protection of all poles with individual status indication. Protects both drivers. It can be used in installations and assemblies up to 500VAC. Manufacturer's Reference: OMB06463C...

Copper screw terminals 10-16 mm2 | Adajusa

Copper screw terminals 10-16 mm2 | Adajusa 2

Copper terminals

Copper screw terminal 10-16 mm2

MJC-1

€1.74 (€1.44 tax excl.)

Tin-plated copper screw terminal for cable cross-section between 10 and 16 mm2, bore diameter 8 mm. Its design ensures easy insertion of the cable by tightening securely around the cable, allowing optimum fixing of heavy cables. Part number: MJC-1 Representative image for illustrative purposes, the item supplied will correspond to the specifications...

View

16 mm2 aluminum connector sleeve | Adajusa

Joint sleeves

Manguito de empalme de cobre 6 mm2

ATH-16

€0.42 (€0.35 tax excl.)

Aluminum tubular splicing sleeve for 16 mm2 cable section and 70 mm length. It has a central stop for better positioning of the conductor and easy insertion of the same Reference: ATH-16 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Joint sleeves

Copper Splice Sleeve For Sale 10 mm2

RTH-16

€0.34 (€0.28 tax excl.)

Copper screw terminals 25-35 mm2 | Adajusa

Copper screw terminals 25-35 mm2 | Adajusa 2

Copper terminals

Copper screw terminal 25-35 mm2

MJC-2

€3.79 (€3.13 tax excl.)

Tin-plated copper screw terminal for cable cross-section between 25 and 35 mm2, bore diameter 11 mm. Its design ensures easy insertion of the cable by tightening securely around the cable, allowing optimum fixing of heavy cables. Part number: MJC-2 Representative image for illustrative purposes, the item supplied will correspond to the specifications...

Electrical connection dealers

Quick connection terminal 2 poles 24A

PC-2252

€0.13 (€0.11 tax excl.)

2-pole 24A, 450Vac quick connection terminal for 2.5mm2 cross-section conductors. Screwless quick connection that guarantees a simple, fast and safe electrical connection. Part number: PC-2252 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Electrical connection dealers

Terminal de conexión rápida 4 polos 24A

PC-2254

€0.24 (€0.20 tax excl.)

24A, 450Vac 4-pole quick connection terminal for 2.5mm2 cross-section conductors. Screwless quick connection that guarantees a simple, fast and safe electrical connection. Part number: PC-2254 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Copper screw terminals 50-70 mm2 | Adajusa

Copper screw terminals 50-70 mm2 | Adajusa 2

Copper terminals

Copper screw terminal 50-70 mm2

MJC-3

€5.99 (€4.95 tax excl.)

Tin-plated copper screw terminal for cable cross-section between 50 and 70 mm2, bore diameter 11 mm. Its design ensures easy insertion of the cable by tightening securely around the cable, allowing optimum fixing of heavy cables. Part number: MJC-3 Representative image for illustrative purposes, the item supplied will correspond to the specifications...

Copper screw terminals 120-150 mm2 | Adajusa

Copper screw terminals 120-150 mm2 | Adajusa 2

Copper terminals

Copper screw terminal 120-150 mm2

MJC-4

€9.93 (€8.21 tax excl.)

Tin-plated copper screw terminal for cable cross-section between 120 and 150 mm2, bore diameter 15 mm. Its design ensures easy insertion of the cable by tightening securely around the cable, allowing optimum fixing of heavy cables. Part number: MJC-4 Representative image for illustrative purposes, the item supplied will correspond to the specifications...

Copper screw terminals 185-240 mm2 | Adajusa

Copper screw terminals 185-240 mm2 | Adajusa 2

Copper terminals

Copper screw terminal 185-240 mm2

MJC-5

€21.82 (€18.03 tax excl.)

Tin-plated copper screw terminal for cable cross-section between 185 and 240 mm2, bore diameter 18 mm. Its design ensures easy insertion of the cable by tightening securely around the cable, allowing optimum fixing of heavy cables. Part number: MJC-5 Representative image for illustrative purposes, the item supplied will correspond to the specifications...

Stop switch box contactor + thermal relay 0.4-0.63A | Adajusa

Stop switch box contactor + thermal relay 0.4-0.63A | Adajusa 2

Contactor boxes

Direct starter with three-phase contactor 9A coil 230Vac and thermal relay 0.4 to 0.63A

TMI025kW/230

€29.79 (€24.62 tax excl.)

Boxed direct starter for electric motor, includes 9A category AC3 three-phase contactor, 230Vac coil and thermal relay with 0.4 - 0.63A regulation, and start/stop pushbuttons. It allows the starting of three-phase motors at both 230Vac and 400Vac and single-phase motors at 230Vac. Contactor coil: 230VacThermal relay regulation: 0.4 to...

Contactor boxes

Direct starter with three-phase contactor 9A coil 400Vac and thermal relay 0.4 to 0.63A

TMI025kW/400

€29.79 (€24.62 tax excl.)

Boxed direct starter for electric motor, includes 9A category AC3 three-phase contactor, 400Vac coil and thermal relay with regulation 0.4 - 0.63A, and start/stop pushbuttons. It allows the starting of three-phase motors at both 230Vac and 400Vac and single-phase motors at 230Vac. Contactor coil: 400VacThermal relay regulation: 0.4 to...

Stop switch box contactor + thermal relay 0.63-1A | Adajusa

Stop switch box contactor + thermal relay 0.63-1A | Adajusa 2

Contactor boxes

Direct starter with three-phase contactor 9A coil 230Vac and thermal relay 0.63 to 1A

TMI037kW/230

€29.79 (€24.62 tax excl.)

Boxed direct starter for electric motor, includes 9A category AC3 three-phase contactor, 230Vac coil and thermal relay with 0.63 - 1A regulation, and start/stop pushbuttons. It allows the starting of three-phase motors at both 230Vac and 400Vac and single-phase motors at 230Vac. Contactor coil: 230VacThermal relay regulation: 0.63 to...

Contactor boxes

Direct starter with three-phase contactor 9A coil 400Vac and thermal relay 0.63 to 1A

TMI037kW/400

€29.79 (€24.62 tax excl.)

Boxed direct starter for electric motor, includes 9A category AC3 three-phase contactor, 400Vac coil and thermal relay with 0.63 - 1A regulation, and start/stop pushbuttons. It allows the starting of three-phase motors at both 230Vac and 400Vac and single-phase motors at 230Vac. Contactor coil: 400VacThermal relay regulation: 0.63 to...

Stop switch box contactor + thermal relay 1-1,6A | Adajusa

Stop switch box contactor + thermal relay 1-1,6A | Adajusa 2

Contactor boxes

Direct starter with three-phase contactor 9A coil 230Vac and thermal relay 1 to 1.6A

TMI055kW/230

€29.79 (€24.62 tax excl.)

Boxed direct starter for electric motor, includes 9A category AC3 three-phase contactor, 230Vac coil and thermal relay with regulation 1 - 1.6A, and start/stop pushbuttons. It allows the starting of three-phase motors at both 230Vac and 400Vac and single-phase motors at 230Vac. Contactor coil: 230VacThermal relay regulation: 1 to 1.6A Reference:...

Contactor boxes

Direct starter with three-phase contactor 9A coil 400Vac and thermal relay 1 to 1.6A

TMI055kW/400

€29.79 (€24.62 tax excl.)

Boxed direct starter for electric motor, includes 9A category AC3 three-phase contactor, 400Vac coil and thermal relay with regulation 1 - 1.6A, and start/stop pushbuttons. It allows the starting of three-phase motors at both 230Vac and 400Vac and single-phase motors at 230Vac. Contactor coil: 400VacThermal relay regulation: 1 to 1.6A Reference:...

Stop switch box contactor + thermal relay 1.6-2.5A | Adajusa

Stop switch box contactor + thermal relay 1.6-2.5A | Adajusa 2

Contactor boxes

Direct starter with three-phase contactor 9A coil 230Vac and thermal relay 1.6 to 2.5A

TMI075kW/230

€29.79 (€24.62 tax excl.)

Boxed direct starter for electric motor, includes 9A category AC3 three-phase contactor, 230Vac coil and thermal relay with 1.6 - 2.5A regulation, and start/stop pushbuttons. It allows the starting of three-phase motors at both 230Vac and 400Vac and single-phase motors at 230Vac. Contactor coil: 230VacThermal relay regulation: 1.6 to...

Contactor boxes

Direct starter with three-phase contactor 9A coil 400Vac and thermal relay 1.6 to 2.5A

TMI075kW/400

€29.79 (€24.62 tax excl.)

Boxed direct starter for electric motor, includes 9A category AC3 three-phase contactor, 400Vac coil and thermal relay with regulation 1.6 - 2.5A, and start/stop pushbuttons. It allows the starting of three-phase motors at both 230Vac and 400Vac and single-phase motors at 230Vac. Contactor coil: 400VacThermal relay regulation: 1.6 to...

Stop switch box contactor + thermal relay 2,5-4A | Adajusa

Stop switch box contactor + thermal relay 2,5-4A | Adajusa 2

Contactor boxes

Direct starter with three-phase contactor 9A coil 230Vac and thermal relay 2.5 to 4A

TMI015kW/230

€29.79 (€24.62 tax excl.)

Boxed direct starter for electric motor, includes 9A category AC3 three-phase contactor, 230Vac coil and thermal relay with 2.5 - 4A regulation, and start/stop pushbuttons. It allows the starting of three-phase motors at both 230Vac and 400Vac and single-phase motors at 230Vac. Contactor coil: 230VacThermal relay regulation: 2.5 to 4A Reference:...

Contactor boxes

Direct starter with three-phase contactor 9A coil 400Vac and thermal relay 2.5 to 4A

TMI015kW/400

€29.79 (€24.62 tax excl.)

Boxed direct starter for electric motor, includes 9A category AC3 three-phase contactor, 400Vac coil and thermal relay with 2.5 - 4A regulation, and start/stop pushbuttons. It allows the starting of three-phase motors at both 230Vac and 400Vac and single-phase motors at 230Vac. Contactor coil: 400VacThermal relay regulation: 2.5 to 4A Reference:...

Stop switch box contactor + thermal relay 4-6A | Adajusa

Stop switch box contactor + thermal relay 4-6A | Adajusa 2

Contactor boxes

Direct starter with three-phase contactor 9A coil 230Vac and thermal relay 4 to 6A

TMI22kW/230

€29.79 (€24.62 tax excl.)

Boxed direct starter for electric motor, includes 9A category AC3 three-phase contactor, 230Vac coil and thermal relay with 4 - 6A regulation, and start/stop pushbuttons. It allows the starting of three-phase motors at both 230Vac and 400Vac and single-phase motors at 230Vac. Contactor coil: 230VacThermal relay regulation: 4 to 6A Reference: TMI...

Contactor boxes

Direct starter with three-phase contactor 9A coil 400Vac and thermal relay 4 to 6A

TMI22kW/400

€29.79 (€24.62 tax excl.)

Boxed direct starter for electric motor, includes 9A category AC3 three-phase contactor, 400Vac coil and thermal relay with 4 - 6A regulation, and start/stop pushbuttons. It allows the starting of three-phase motors at both 230Vac and 400Vac and single-phase motors at 230Vac. Contactor coil: 400VacThermal relay regulation: 4 to 6A Reference: TMI...

Stop switch box contactor + thermal relay 5,5-8A | Adajusa

Stop switch box contactor + thermal relay 5,5-8A | Adajusa 2

Contactor boxes

Direct starter with three-phase contactor 9A coil 230Vac and thermal relay 5.5 to 8A

TMI3kW/230

€29.79 (€24.62 tax excl.)

Boxed direct starter for electric motor, includes 9A category AC3 three-phase contactor, 230Vac coil and thermal relay with 5.5 - 8A regulation, and start/stop pushbuttons. It allows the starting of three-phase motors at both 230Vac and 400Vac and single-phase motors at 230Vac. Contactor coil: 230VacThermal relay regulation: 5.5 to 8A Reference:...

Contactor boxes

Direct starter with three-phase contactor 9A coil 400Vac and thermal relay 5.5 to 8A

TMI3kW/400

€29.79 (€24.62 tax excl.)

Boxed direct starter for electric motor, includes 9A category AC3 three-phase contactor, 400Vac coil and thermal relay with 5.5 - 8A regulation, and start/stop pushbuttons. It allows the starting of three-phase motors at both 230Vac and 400Vac and single-phase motors at 230Vac. Contactor coil: 400VacThermal relay regulation: 5.5 to 8A Reference:...

Stop switch box contactor + thermal relay 7-10A | Adajusa

Stop switch box contactor + thermal relay 7-10A | Adajusa 2

Contactor boxes

Direct starter with 18A three-phase contactor, 230Vac coil and thermal relay 7 to 10A

TMI4kW/230

€34.49 (€28.50 tax excl.)

Boxed direct starter for electric motor, includes 18A category AC3 three-phase contactor, 230Vac coil and thermal relay with 7 - 10A regulation, and start/stop pushbuttons. It allows the starting of three-phase motors at both 230Vac and 400Vac and single-phase motors at 230Vac. Contactor coil: 230VacThermal relay regulation: 7 to 10A Reference:...

Contactor boxes

Direct starter with 18A three-phase contactor, 400Vac coil and thermal relay 7 to 10A

TMI4kW/400

€32.60 (€26.94 tax excl.)

Boxed direct starter for electric motor, includes 18A category AC3 three-phase contactor, 400Vac coil and thermal relay with 7 - 10A regulation, and start/stop pushbuttons. It allows the starting of three-phase motors at both 230Vac and 400Vac and single-phase motors at 230Vac. Contactor coil: 400VacThermal relay regulation: 7 to 10A Reference:...

Stop switch box contactor + thermal relay 9-13A | Adajusa

Stop switch box contactor + thermal relay 9-13A | Adajusa 2

Contactor boxes

Direct starter with three-phase contactor 18A coil 230Vac and thermal relay 9 to 13A

TMI55kW/230

€34.49 (€28.50 tax excl.)

Boxed direct starter for electric motor, includes 18A category AC3 three-phase contactor, 230Vac coil and thermal relay with 9 - 13A regulation, and start/stop pushbuttons. It allows the starting of three-phase motors at both 230Vac and 400Vac and single-phase motors at 230Vac. Contactor coil: 230VacThermal relay regulation: 9 to 13A Reference:...

Contactor boxes

Direct starter with three-phase contactor 18A coil 400Vac and thermal relay 9 to 13A

TMI55kW/400

€32.60 (€26.94 tax excl.)

Boxed direct starter for electric motor, includes 18A category AC3 three-phase contactor, 400Vac coil and thermal relay with 9 - 13A regulation, and start/stop pushbuttons. It allows the starting of three-phase motors at both 230Vac and 400Vac and single-phase motors at 230Vac. Contactor coil: 400VacThermal relay regulation: 9 to 13A Reference:...

Stop switch box contactor + thermal relay 12-18A | Adajusa

Stop switch box contactor + thermal relay 12-18A | Adajusa 2

Contactor boxes

Direct starter with 18A three-phase contactor, 230Vac coil and thermal relay 12 to 18A

TMI75kW/230

€34.49 (€28.50 tax excl.)

Boxed direct starter for electric motor, includes 18A category AC3 three-phase contactor, 230Vac coil and thermal relay with 12 - 18A regulation, and start/stop pushbuttons. It allows the starting of three-phase motors at both 230Vac and 400Vac and single-phase motors at 230Vac. Contactor coil: 230VacThermal relay regulation: 12 to...

Joint sleeves

25 mm2 aluminum connector sleeve

ATH-25

€0.48 (€0.40 tax excl.)

Aluminum tubular splicing sleeve for 25 mm2 cable section and 75 mm length. It has a central stop for better positioning of the conductor and easy insertion of the same Reference: ATH-25 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Contactor boxes

Direct starter with three-phase contactor 18A coil 400Vac and thermal relay 12 to 18A

TMI75kW/400

€32.60 (€26.94 tax excl.)

Boxed direct starter for electric motor, includes 18A category AC3 three-phase contactor, 400Vac coil and thermal relay with 12 - 18A regulation, and start/stop pushbuttons. It allows the starting of three-phase motors at both 230Vac and 400Vac and single-phase motors at 230Vac. Contactor coil: 400VacThermal relay regulation: 12 to...

Joint sleeves

Aluminum connector sleeve 50 mm2

ATH-50

€1.02 (€0.84 tax excl.)

Tubular aluminum splicing sleeve for 50 mm2 cable section and 95 mm length. It has a central stop for better positioning of the conductor and easy insertion of the same Reference: ATH-50 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Stop switch box contactor + thermal relay 17-25A | Adajusa

Stop switch box contactor + thermal relay 17-25A | Adajusa 2

Contactor boxes

Direct starter with three-phase contactor 25A coil 230Vac and thermal relay 17 to 25A

TMI11kW/230

€44.82 (€37.04 tax excl.)

Boxed direct starter for electric motor, includes 25A category AC3 three-phase contactor, 230Vac coil and thermal relay with 17 - 25A regulation, and start/stop pushbuttons. It allows the starting of three-phase motors at both 230Vac and 400Vac and single-phase motors at 230Vac. Contactor coil: 230VacThermal relay regulation: 17 to...

Joint sleeves

95 mm2 aluminum connector sleeve

ATH-95

€1.62 (€1.34 tax excl.)

Tubular aluminum splicing sleeve for 95 mm2 cable section and 110 mm length. It has a central stop for better positioning of the conductor and easy insertion of the same Reference: ATH-95 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Contactor boxes

Direct starter with three-phase contactor 25A coil 400Vac and thermal relay 17 to 25A

TMI11kW/400

€44.82 (€37.04 tax excl.)

Boxed direct starter for electric motor, includes 25A category AC3 three-phase contactor, 400Vac coil and thermal relay with 17 - 25A regulation, and start/stop pushbuttons. It allows the starting of three-phase motors at both 230Vac and 400Vac and single-phase motors at 230Vac. Contactor coil: 400VacThermal relay regulation: 17 to...

Joint sleeves

150 mm2 Aluminum connector sleeve

ATH-150

€2.20 (€1.82 tax excl.)

Tubular aluminum splicing sleeve for 150 mm2 cable section and 120 mm length. It has a central stop for better positioning of the conductor and easy insertion of the same Reference: ATH-150 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Stop switch box contactor + thermal relay 23-32A | Adajusa

Stop switch box contactor + thermal relay 23-32A | Adajusa 2

Contactor boxes

Direct starter with three-phase contactor 25A coil 230Vac and thermal relay 23 to 32A

TMI15kW/230

€44.82 (€37.04 tax excl.)

Boxed direct starter for electric motor, includes 25A category AC3 three-phase contactor, 230Vac coil and thermal relay with 23 - 32A regulation, and start/stop pushbuttons. It allows the starting of three-phase motors at both 230Vac and 400Vac and single-phase motors at 230Vac. Contactor coil: 230VacThermal relay regulation: 23 to...

Joint sleeves

Aluminum sleeve 240 mm2

ATH-240

€3.64 (€3.01 tax excl.)

Tubular aluminum splicing sleeve for 240 mm2 cable section and 130 mm length. It has a central stop for better positioning of the conductor and easy insertion of the same Reference: ATH-240 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Contactor boxes

Direct starter with three-phase contactor 25A coil 400Vac and thermal relay 23 to 32A

TMI15kW/400

€44.82 (€37.04 tax excl.)

Boxed direct starter for electric motor, includes 25A category AC3 three-phase contactor, 400Vac coil and thermal relay with 23 - 32A regulation, and start/stop pushbuttons. It allows the starting of three-phase motors at both 230Vac and 400Vac and single-phase motors at 230Vac. Contactor coil: 400VacThermal relay regulation: 23 to...

Joint sleeves

6 mm2 copper splice sleeve

RTH-10

€0.30 (€0.25 tax excl.)

Tubular tinned copper splicing sleeve for 6 mm2 section cable and 30 mm length. It has a central stop for better positioning of the conductor and easy insertion of the same. Reference: RTH-10 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Cutting tool for cable 125mm | Adajusa 2

Tools

Cutting tool for cable up to 125 mm2

KV-2

€25.40 (€20.99 tax excl.)

Manual cutting tool for copper and aluminum cables up to 125mm². Light weight and ergonomic handle for correct handling and precise cable cutting. Part number: KV-2 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Joint sleeves

16 mm2 copper connector sleeve

RTH-25

€0.65 (€0.54 tax excl.)

Tubular tinned copper splicing sleeve for cable of 16 mm2 section and 70 mm length. It has a central stop for better positioning of the conductor and easy insertion of the same. Reference: RTH-25 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Joint sleeves

25 mm2 copper connector sleeve

RTH-35

€0.92 (€0.76 tax excl.)

Tubular tinned copper splicing sleeve for 25 mm2 cross section cable and 75 mm length. It has a central stop for better positioning of the conductor and easy insertion of the same. Reference: RTH-35 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Joint sleeves

35 mm2 copper splice sleeve

RTH-50

€1.26 (€1.04 tax excl.)

Tubular tinned copper splicing sleeve for 35 mm2 cable section and 80 mm length. It has a central stop for better positioning of the conductor and easy insertion of the same. Reference: RTH-50 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Joint sleeves

50 mm2 copper connector sleeve

RTH-70

€1.74 (€1.44 tax excl.)

Tubular tinned copper splicing sleeve for 50 mm2 cable section and 90 mm length. It has a central stop for better positioning of the conductor and easy insertion of the same. Reference: RTH-70 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Joint sleeves

Copper splice sleeve 70 mm2

RTH-95

€2.60 (€2.15 tax excl.)

Tubular tinned copper splicing sleeve for 70 mm2 cable section and 95 mm length. It has a central stop for better positioning of the conductor and easy insertion of the same. Reference: RTH-95 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Joint sleeves

Copper splice sleeve 95 mm2

RTH-120

€3.12 (€2.58 tax excl.)

Tubular tinned copper splicing sleeve for 95 mm2 cross section cable and 100 mm length. It has a central stop for better positioning of the conductor and easy insertion of the same.Reference: RTH-120 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Joint sleeves

120 mm2 copper splice sleeve

RTH-150

€3.67 (€3.03 tax excl.)

Tubular tinned copper splicing sleeve for 120 mm2 cable section and 105 mm length. It has a central stop for better positioning of the conductor and easy insertion of the same. Reference: RTH-150 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Joint sleeves

185 mm2 copper splice sleeve

RTH-240

€7.33 (€6.06 tax excl.)

Tubular tinned copper splicing sleeve for 185 mm2 cable section and 120 mm length. It has a central stop for better positioning of the conductor and easy insertion of the same. Reference: RTH-240 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Joint sleeves

Copper splice sleeve 150 mm2

RTH-185

€6.15 (€5.08 tax excl.)

Tubular tinned copper splicing sleeve for 150 mm2 cable section and 110 mm length. It has a central stop for better positioning of the conductor and easy insertion of the same. Reference: RTH-185 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Electrical connection dealers

Quick connection terminal 3 poles 24A

PC-2253

€0.17 (€0.14 tax excl.)

Quick connection terminal, 3-pole 24A, 450Vac for 2.5mm2 cross-section conductors. Screwless quick connection that guarantees a simple, fast and safe electrical connection. Part number: PC-2253 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Quick connection terminal 4 poles 24A | Adajusa

Electrical connection dealers

5-pole 24A quick connection terminal

PC-2255

€0.24 (€0.20 tax excl.)

5-pole 24A, 450Vac quick connection terminal for 2.5mm2 cross-section conductors. Screwless quick connection that guarantees a simple, fast and safe electrical connection. Part number: PC-2255 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Electrical connection dealers

Connection terminal 8-pole 24A quick

PC-2258

€0.48 (€0.40 tax excl.)

8-pole 24A, 450Vac quick connection terminal for 2.5mm2 cross-section conductors. Screwless quick connection that guarantees a simple, fast and safe electrical connection. Part number: PC-2258 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Insulated terminals

Bag of 100 pre-insulated splice sleeves for 0,15-1,5mm2 cable

SZTH-1,5

€6.88 (€5.69 tax excl.)

Bag of 100 pre-insulated splice sleeves in red color, 26mm long, for cable cross-section from 0.15mm² to 1.5mm². Made of polyamide and tin-plated electrolytic copper. Reference: SZTH-1,5Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

male pre-insulated faston terminal for cbles of different diameters

Faston terminals

Bag of pre-insulated terminals faston male for cable of 0.5-1.5 mm2

AS1

€4.01 (€3.31 tax excl.)

Bag of 100 faston male terminals pre-insulated of 6,3x0.8mm for cable from Ø 0,5mm² up to 1,5mm², made of polyamide and electrolytic copper estañado. Color: Blue/Red/YellowTerminal dimensions: 6.3x0.8mm reference: AS1Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Faston terminals

Bag of pre-insulated terminals faston male for cable of 1.5-2.5 mm2

AS2

€4.01 (€3.31 tax excl.)

Bag of 100 terminals faston male (flat) pre-insulated of 6,3x0.8mm for cable of Ø 1,5mm² up to 2,5mm², made of polyamide and electrolytic copper estañado.Color: Blue/Red/YellowTerminal dimensions: 6.3x0.8mm reference: AS2Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Faston terminals

Pre-insulated terminal bag faston female for cable of 0.5-1.5 mm2

AS3

€4.01 (€3.31 tax excl.)

Bag of 100 faston terminals pre-insulated female of 6,3x0.8mm for cable from Ø 0,5mm² up to 1,5mm², made of polyamide and electrolytic copper estañado.Color: Blue/Red/YellowTerminal dimensions: 6.3x0.8mm reference: AS3Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Faston terminals

Pre-insulated female faston terminal bag for 1.5-2.5 mm2 cable

AS4

€4.01 (€3.31 tax excl.)

Bag of 100 faston terminals pre-insulated female of 6,3x0.8mm for cable from Ø 1,5mm² to 2,5mm², made of polyamide and electrolytic copper estañado.Color: Blue/Red/YellowTerminal dimensions: 6.3x0.8mm reference: AS4Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Non-insulated round terminals

Bag of 4mm non-insulated round cable lugs for 1.5-2.5mm2 cable

MSS-2,5/4,2

€4.62 (€3.82 tax excl.)

Bag of 100 non-insulated round cable lugs, 4.2mm diameter, for cable cross-section from 1.5mm² to 2.5mm². Made of tinned electrolytic copper. Part number: MSS-2,5/4,2Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Faston terminals

Bag of 100 non-insulated male faston terminals for 1.5-2.5 mm2 cable

AK-6,3

€4.01 (€3.31 tax excl.)

Bag of 100 uninsulated 6.3mm male faston terminals for cable cross-section from 1.5mm² to 2.5mm². Made of tin-plated electrolytic copper. Part number: AK-6,3Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

35mm ring terminal for screw from 05mm2 up to 1.5mm2

Isolated round terminals

Bag of 3.5mm pre-insulated round terminals for 0.5-1.5mm cable

MSZS-1,5/3,5

€3.61 (€2.98 tax excl.)

Bag of 100 pre-insulated round terminals of 3.5mm, for cable from 0.5mm² to 1.5mm², made of polyamide and electrolytic copper stud.Color: RedTerminal diameter: 3.5mmreference: MSZS-1.5/3.5Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Isolated round terminals

Bag of 3.5mm pre-insulated round terminals for 1.5-2.5mm cable

MSZS-2,5/3,5

€5.01 (€4.14 tax excl.)

Bag of 100 pre-insulated round terminals of 3.5mm for cable from 1.5mm² to 2.5mm², made of polyamide and electrolytic copper.Color: BlueTerminal diameter: 3.5mmreference: MSZS-2/3.5Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Isolated round terminals

Bag of 4mm pre-insulated round terminals for 0.5-1.5mm cable

MSZS-1,5/4

€4.01 (€3.31 tax excl.)

Bag of 100 pre-insulated round terminals of 4mm, for cable from 0.5mm² to 1.5mm², made of polyamide and electrolytic copper.Color: RedTerminal diameter: 4mmreference: MSZS-1.5/4Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Isolated round terminals

Bag of 4mm pre-insulated round terminals for 1.5-2.5mm cable

MSZS-2,5/4

€5.11 (€4.22 tax excl.)

Bag of 100 pre-insulated round terminals of 4mm, for cable from 1.5mm² to 2.5mm², made of polyamide and electrolytic copper estañado.Color: BlueTerminal diameter: 4mmReference: MSZS-2.5/4Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Isolated round terminals

Terminal bag for 0.5-1.5mm cable

MSZS-1,5/6

€7.43 (€6.14 tax excl.)

Bag of 100 pre-insulated 6mm round terminals for cables from 0.5mm² to 1.5mm², made of polyamide and tinned electrolytic copper .RedTerminal diameter: 6mmReference: MSZS-1,5/6 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Isolated round terminals

Terminal bag diameter 5mm, cables 1.5-2.5mm

MSZS-2,5/5

€5.41 (€4.47 tax excl.)

Bag of 100 pre-insulated 5mm round terminals, for cables from 1.5mm² to 2.5mm², made of polyamide and tinned electrolytic copper . Color: Blue Terminal diameter: 5mm Reference: MSZS-2.5/5 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Isolated round terminals

Bag of 4mm pre-insulated round terminals for 4-6mm cable

MSZS-6/4

€10.85 (€8.97 tax excl.)

Bag of 100 round terminals pre-insulated of 4mm, for cable from 4mm² to 6mm², made of polyamide and electrolytic copper estañado.Color: YellowDiameter: 4mmreference: MSZS-6/4Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Non-insulated round terminals

Bag of 5mm non-insulated round cable lugs for 1.5-2.5mm2 cable

MSS-2,5/5,2

€6.03 (€4.98 tax excl.)

Bag of 100 non-insulated round cable lugs, 5.2mm diameter, for cable cross-section from 1.5mm² to 2.5mm². Made of tinned electrolytic copper. Part number: MSS-2,5/5,2Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Non-insulated round terminals

Bag of 6mm non-insulated round cable lugs for 1.5-2.5mm2 cable

MS-2,5/6,2

€9.01 (€7.45 tax excl.)

Bag of 100 non-insulated round cable lugs, 6.2mm diameter, for cable cross-section from 1.5mm² to 2.5mm². Made of tinned electrolytic copper. Part number: MS-2,5/6,2Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Non-insulated round terminals

Bag of 8mm non-insulated round cable lugs for 1.5-2.5mm cable

MS-2,5/8

€7.82 (€6.46 tax excl.)

Bag of 100 non-insulated round cable lugs, 8.2mm diameter, for cable cross-section from 1.5mm² to 2.5mm². Made of tinned electrolytic copper. Part number: MS-2,5/8Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Non-insulated round terminals

Bag of 6mm non-insulated round cable lugs for 4-6mm2 cable

MS-6/6,2

€12.62 (€10.43 tax excl.)

Bag of 100 non-insulated round cable lugs, 6.2mm diameter, for cable cross-section from 4mm² to 6mm². Made of tinned electrolytic copper. Reference: MS-6/6,2Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Non-insulated round terminals

Bag of 8mm non-insulated round terminals for 4-6mm2 cable

MS-6/8,2

€16.04 (€13.26 tax excl.)

Bag of 100 non-insulated round cable lugs, 8.2mm diameter, for cable cross-section from 4mm² to 6mm². Made of tinned electrolytic copper. Reference: MS-6/8,2Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Non-insulated round terminals

Bag of 10mm non-insulated round cable lugs for 4-6mm2 cable

MS-6/10

€16.04 (€13.26 tax excl.)

Bag of 100 non-insulated round cable lugs, 10.2mm diameter, for cable cross section from 4mm² to 6mm². Made of tinned electrolytic copper. Reference: MS-6/10Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Insulated terminals

Bag of 100 pre-insulated splice sleeves for 1.5-2.5mm2 cable

SZTH-2,5

€9.18 (€7.59 tax excl.)

Bag of 100 pre-insulated splice sleeves in blue color, 26mm long, for cable cross-section from 1.5mm² to 2.5mm². Made of polyamide and tin-plated electrolytic copper. Reference: SZTH-2,5Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Switches

ON-OFF switch with red indicator light 6A-250V

MINI-3 red

€1.56 (€1.29 tax excl.)

Recessed switch with red indicator light, 6A - 250V. Reference: MINI-3 red

Insulated terminals

Bag of 100 pre-insulated splice sleeves for 4-6mm2 cable

SZTH-6

€13.76 (€11.37 tax excl.)

Bag of 100 pre-insulated splice sleeves in yellow color, 26mm long, for cable cross-section from 4mm² to 6mm². Made of polyamide and tin-plated electrolytic copper. Reference: SZTH-6Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Switches

ON-OFF switch with green indicator light 6A-250V

MINI-3 green

€1.56 (€1.29 tax excl.)

Recessed switch with green indicator light, 6A - 250V. Reference: MINI-3 green

Switches

ON-OFF switch with yellow indicator light 6A-250V

MINI-3 yellow

€1.56 (€1.29 tax excl.)

Recessed switch with yellow indicator light, 6A - 250V. Reference: MINI-3 yellow

Switches

ON-OFF switch with red indicator light 10A-250V

SW-01 red

€1.84 (€1.52 tax excl.)

Recessed switch with red indicator light, 10A - 250V. Reference: SW-01 red

Switches

ON-OFF switch with green indicator light 10A-250V

SW-01 green

€1.84 (€1.52 tax excl.)

Recessed switch with green indicator light, 10A - 250V. Reference: SW-01 green

Tools

Cutting tool for cables up to 250mm2

KV-3

€41.31 (€34.14 tax excl.)

Manual cutting tool for copper and aluminum cables up to 250mm². Light weight and ergonomic handle for correct handling and precise cable cutting. Part number: KV-3 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Switches

ON-OFF switch with yellow indicator light 10A-250V

SW-01 yellow

€1.84 (€1.52 tax excl.)

Recessed switch with green indicator light, 10A - 250V. Reference: SW-01 yellow

Tools

Cutting tool for cable up to 500mm2

KV-4

€119.16 (€98.48 tax excl.)

Manual cutting tool for copper and aluminum cables up to 500mm². Light weight and ergonomic handle for correct handling and precise cable cutting. Part number: KV-4 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Switches

ON-OFF switch with red indicator light 16A-250V 2 circuits

SW-02 red

€1.84 (€1.52 tax excl.)

Flush-mounted switch with red indicator light, 2 open contacts, 16A - 250V Part number: SW-02 red

View

Switches

ON-OFF switch with green LED indicator 16A-250V 2 circuits

SW-02 green

€1.84 (€1.52 tax excl.)

Flush mount switch with green indicator light, 2 open contacts, 16A - 250V Part number: SW-02 green

View

Differential 2 poles 40A 30mA OMU adajusa OMR

Bipolar differential (2 poles)

Differential Circuit Breaker RCD 2 poles 40A 30mA 10kA class AC - OMU

OMR102040003

€12.22 (€10.10 tax excl.)

Single-phase differential 2 Poles (P+N) 40A 0.03A (30mA) CLASS AC 10kA. Electromagnetic type, which allows you not to lose protection in case of variation in voltage input and thus be able to maintain the protection of the active phase in case of neutral loss. Standard "AC" class differential. Ref: OMR102040003 Representative image for illustrative...

Joint sleeves

Aluminum connection sleeve 35 mm2

ATH-35

€0.74 (€0.61 tax excl.)

tubular aluminum splicing sleeve for cable with section 35 mm 2 and length 85 mm. It has a central stop for better driver positioning and easy insertion. Reference: ATH-35 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Switches

ON-OFF switch with yellow indicator light 16A-250V 2 circuits

SW-02 yellow

€1.84 (€1.52 tax excl.)

Flush-mounted switch with yellow indicator light, 2 open contacts, 16A - 250V Part number: SW-02 yellow

Bipolar differential (2 poles)

Differential Circuit Breaker RCD 2 poles 25A 30mA 10kA class A - OMU

OMR102A25003

€19.31 (€15.96 tax excl.)

Single-phase differential 2 Poles (P+N) 25A 0.03A (30mA) class A 10kA. Electromagnetic type, which allows you not to lose protection in case of variation in voltage input and thus be able to maintain the protection of the active phase in case of neutral loss. Standard differential class "A". Ref: OMR102A25003 Representative image for illustrative...

Bipolar differential (2 poles)

Differential Circuit Breaker RCD 2 poles 40A 30mA 10kA Class A - OMU

OMR102A40003

€19.31 (€15.96 tax excl.)

Single-phase differential 2 Poles (P+N) 40A 0.03A (30mA) class A 10kA. Electromagnetic type, which allows you not to lose protection in case of variation in voltage input and thus be able to maintain the protection of the active phase in case of neutral loss. Standard differential class "A". Ref: OMR102A40003 Representative image for illustrative...

Differential 2 poles 40A 300mA OMU adajusa OMR

Bipolar differential (2 poles)

Differential Circuit Breaker RCD 2 poles 40A 300mA 10kA class AC - OMU

OMR10204003

€12.22 (€10.10 tax excl.)

Single-phase differential 2 Poles (P+N) 40A 0.3A (300mA) CLASS AC 10kA. Electromagnetic type, which allows you not to lose protection in case of variation in voltage input and thus be able to maintain the protection of the active phase in case of neutral loss. Standard "AC" class differential. Ref: OMR10204003 Representative image for illustrative...

Terminal signallers

Strip of 10 markers for terminal blocks L1 TSKA Series

Marker L1

€0.36 (€0.30 tax excl.)

Strip with 10 independent markers with "L1" inscription for TSKA series terminals. Quick and easy to install, it solves marking problems in cabinets and electrical installations. Part No.: Marker Strip L1Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

View

Terminal signallers

Strip of 10 markers for terminal blocks 0-9 TSKA Series

Marker 0-9

€0.33 (€0.27 tax excl.)

Strip with 10 independent markers with inscription of numbers from 0 to 9 for TSKA series terminals. Quick and easy to install, it solves marking problems in cabinets and electrical installations. Part no.: Marker Strip 0-9Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

View

Bipolar differential (2 poles)

Differential Circuit Breaker RCD 2 poles 25A 300mA 10kA Class A - OMU

OMR102A2503

€19.31 (€15.96 tax excl.)

Single-phase differential 2 Poles (P+N) 25A 0.3A (300mA) class A 10kA. Electromagnetic type, which allows you not to lose protection in case of variation in voltage input and thus be able to maintain the protection of the active phase in case of neutral loss. Standard differential class "A". Ref: OMR102A2503 Representative image for illustrative...

Bipolar differential (2 poles)

Differential Circuit Breaker RCD 2 poles 40A 300mA 10kA class A - OMU

OMR102A4003

€19.31 (€15.96 tax excl.)

Single-phase differential 2 Poles (P+N) 40A 0.3A (300mA) class A 10kA. Electromagnetic type, which allows you not to lose protection in case of variation in voltage input and thus be able to maintain the protection of the active phase in case of neutral loss. Standard differential class "A". Ref: OMR102A4003 Representative image for illustrative...

20A disconnector switch, 3 Adajusa poles

Disconnector switches 4-poles

Three-phase Switch disconnector 20A (4 poles) yellow-red

MX-420Y

€9.93 (€8.21 tax excl.)

Rotary switch, 4-pole tetrapolar main disconnector 20A . 0-I, with yellow-red drive, lockable in position O. Front panel size 66x66 mm. Suitable for interruption, connection and switching of electrical circuits, as well as direct starting of motors and main switch in machines.Reference: MX-420Y Representative image for illustrative purposes, the item...

Three-phase switch box 3 poles 20A Adajusa

Three-phase switch box 3 poles 20A Adajusa 2

Box-mounted disconnector switches

Three-phase switch box 32A (4 poles) yellow-red control

MX-432PY

€26.83 (€22.17 tax excl.)

Rotary switch, main disconnector 4 poles four-pole 32A . Mounted in polycarbonate box, with yellow-red drive lockable in "O" position. IP65 protection grade. Suitable for interrupting electrical circuits, as well as direct starting of motors and main switches in machines. Reference: MX-432PY Representative image for illustrative purposes, the item...

Disconnector switches 4-poles

Three-phase Switch disconnector 25A (4 poles) yellow-red

MX-425Y

€14.91 (€12.32 tax excl.)

Rotary switch, 4-pole four-pole main disconnector 25A . 0-I, with yellow-red drive, lockable in position O. Front panel size 66x66 mm. Suitable for interruption, connection and switching of electrical circuits, as well as direct starting of motors and main switch in machines.Reference: MX-425Y Representative image for illustrative purposes, the item...

Disconnector switches 4-poles

Three-phase Switch disconnector 32A (4 poles) yellow-red

MX-432Y

€16.90 (€13.97 tax excl.)

Rotary switch, 4-pole four-pole main disconnector 32A . 0-I, with yellow-red drive, lockable in position O. Front panel size 66x66 mm. Suitable for interruption, connection and switching of electrical circuits, as well as direct starting of motors and main switch in machines.Reference: MX-432Y Representative image for illustrative purposes, the item...

View

Disconnector switches 4-poles

Three-phase Switch disconnector 40A (4 poles) yellow-red

MX-440Y

€17.88 (€14.78 tax excl.)

Rotary switch, 4-pole four-pole 40A main disconnector. 0-I, with yellow-red drive, lockable in position O. Front panel size 66x66 mm. Suitable for interruption, connection and switching of electrical circuits, as well as direct starting of motors and main switch in machines.Reference: MX-440Y Representative image for illustrative purposes, the item...

Terminal signallers

Strip of 10 markers for terminals 10-19 TSKA Series

Marker 10-19

€0.36 (€0.30 tax excl.)

Strip with 10 independent markers with inscription of numbers from 10 to 19 for TSKA series terminals. Quick and easy installation, it allows you to solve marking problems in cabinets and electrical installations. Reference: Marker Strip 10-19 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Disconnector switches 4-poles

Three-phase Switch disconnector 63A (4 poles) yellow-red

MX-463Y

€33.77 (€27.91 tax excl.)

Rotary switch, 4-pole four-pole main disconnector 63A . 0-I, with yellow-red drive, lockable in position O. Front panel size 66x66 mm. Suitable for interruption, connection and switching of electrical circuits, as well as direct starting of motors and main switch in machines.Reference: MX-463Y Representative image for illustrative purposes, the item...

Terminal signallers

Strip of 10 markers for terminals 20-29 TSKA Series

Marker 20-29

€0.36 (€0.30 tax excl.)

Strip with 10 independent markers with inscription of numbers from 20 to 29 for terminal blocks of the TSKA series. Quick and easy installation, it allows you to solve marking problems in cabinets and electrical installations. Reference: Marker Strip 20-29 Representative image for illustrative purposes, the item supplied will correspond to the indicated...

Disconnector switches 4-poles

Three-phase Switch disconnector 100A (4 poles) yellow-red

MX-4100Y

€50.65 (€41.86 tax excl.)

Rotary switch, 100A four-pole 4-pole main disconnector. 0-I, with yellow-red drive, lockable in position O. Front panel size 66x66 mm. Suitable for interruption, connection and switching of electrical circuits, as well as direct starting of motors and main switch in machines.Reference: MX-4100Y Representative image for illustrative purposes, the item...

Terminal signallers

Strip of 10 markers for terminals 30-39 TSKA Series

Marker 30-39

€0.36 (€0.30 tax excl.)

Strip with 10 independent markers with inscription of numbers from 30 to 39 for terminal blocks of the TSKA series. Quick and easy installation, it allows you to solve marking problems in cabinets and electrical installations. Reference: Marker Strip 30-39 Representative image for illustrative purposes, the item supplied will correspond to the indicated...

Differential 4 poles 25A 30mA omu systems adajusa

Four-pole differential (4 poles)

Differential Circuit Breaker RCD 4 poles 25A 30mA 10kA - OMU

OMR104025003

€19.11 (€15.79 tax excl.)

Three-phase differential 4 Poles (3+N) 25A 0.03A (30mA) 10kA AC class. Electromagnetic type, which allows you not to lose protection in case of variation in voltage input and thus be able to maintain the protection of the active phase in case of neutral loss. Standard "AC" class differential. Ref: OMR104025003

Box-mounted disconnector switches

20A three-phase switch box (4 poles) yellow-red control

MX-420PY

€14.52 (€12.00 tax excl.)

Rotary switch, main disconnector 4 poles four-pole 20A . Mounted in polycarbonate box, with yellow-red drive lockable in "O" position. IP65 protection grade. Suitable for interrupting electrical circuits, as well as direct starting of motors and main switches in machines.Reference: MX-420PY Representative image for illustrative purposes, the item...

Terminal signallers

Strip of 10 markers for terminals 40-49 TSKA Series

Marker 40-49

€0.36 (€0.30 tax excl.)

Strip with 10 independent markers with inscription of numbers from 40 to 49 for TSKA series terminals. Quick and easy installation, it allows you to solve marking problems in cabinets and electrical installations. Reference: Marker Strip 40-49 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Differential 4 poles 40A 30mA omu systems adajusa

Four-pole differential (4 poles)

Differential Circuit Breaker RCD 4 poles 40A 30mA 10kA - OMU

OMR104040003

€19.11 (€15.79 tax excl.)

Three-phase differential 4 Poles (3+N) 40A 0.03A (30mA) 10kA AC class. Electromagnetic type, which allows you not to lose protection in case of variation in voltage input and thus be able to maintain the protection of the active phase in case of neutral loss. Standard "AC" class differential. Ref: OMR104040003

Box-mounted disconnector switches

Three-phase switch box 25A (4 poles) yellow-red control

MX-425PY

€23.84 (€19.70 tax excl.)

Rotary switch, main disconnector 4 poles four-pole 25A . Mounted in polycarbonate box, with yellow-red drive lockable in "O" position. IP65 protection grade. Suitable for interrupting electrical circuits, as well as direct starting of motors and main switches in machines.Reference: MX-425PY Representative image for illustrative purposes, the item...

Terminal signallers

Strip of 10 markers for terminals 50-59 TSKA Series

Marker 50-59

€0.36 (€0.30 tax excl.)

Strip with 10 independent markers with inscription of numbers from 50 to 59 for terminals of the TSKA series. Quick and easy installation, it allows you to solve marking problems in cabinets and electrical installations. Reference: Marker Strip 50-59 Representative image for illustrative purposes, the item supplied will correspond to the indicated...

Differential 4 poles 63A 30mA omu systems adajusa

Four-pole differential (4 poles)

Differential Circuit Breaker RCD 4 poles 63A 30mA 10kA - OMU

OMR104063003

€20.33 (€16.80 tax excl.)

Three-phase differential 4 Poles (3+N) 63A 0.03A (30mA) 10kA AC class. Electromagnetic type, which allows you not to lose protection in case of variation in voltage input and thus be able to maintain the protection of the active phase in case of neutral loss. Standard "AC" class differential. Ref: OMR104063003

Box-mounted disconnector switches

Three-phase switch box 40A (4 poles) yellow-red control

MX-440PY

€30.79 (€25.45 tax excl.)

Rotary switch, main disconnector 4 poles four-pole 40A . Mounted in polycarbonate box, with yellow-red drive lockable in "O" position. IP65 protection grade. Suitable for interrupting electrical circuits, as well as direct starting of motors and main switches in machines.Reference: MX-440PY Representative image for illustrative purposes, the item...

Terminal signallers

Strip of 10 markers for terminals 60-69 TSKA Series

Marker 60-69

€0.36 (€0.30 tax excl.)

Strip with 10 independent markers with inscription of numbers from 60 to 69 for terminal blocks of the TSKA series. Quick and easy installation, it allows you to solve marking problems in cabinets and electrical installations. Reference: Marker Strip 60-69 Representative image for illustrative purposes, the item supplied will correspond to the indicated...

Differential 4 poles 100A 30mA omu systems adajusa

Four-pole differential (4 poles)

Differential Circuit Breaker RCD 4 poles 100A 30mA 10kA - OMU

OMR104100003

€33.09 (€27.35 tax excl.)

Three-phase differential 4 Poles (3+N) 100A 0.03A (30mA) 10kA AC class. Electromagnetic type, which allows you not to lose protection in case of variation in voltage input and thus be able to maintain the protection of the active phase in case of neutral loss. Standard "AC" class differential. Ref: OMR104100003

Box-mounted disconnector switches

Three-phase switch box 63A (4 poles) yellow-red control

MX-463PY

€65.55 (€54.17 tax excl.)

Rotary switch, 4-pole four-pole main disconnector 63A . Mounted in polycarbonate box, with yellow-red drive lockable in "O" position. IP65 protection grade. Suitable for interrupting electrical circuits, as well as direct starting of motors and main switches in machines.Reference: MX-463PY Representative image for illustrative purposes, the item...

Terminal signallers

Strip of 10 markers for terminals 70-79 TSKA Series

Marker 70-79

€0.36 (€0.30 tax excl.)

Strip with 10 independent markers with inscription of numbers from 70 to 79 for terminals of the TSKA series. Quick and easy installation, it allows you to solve marking problems in cabinets and electrical installations. Reference: Marker Strip 70-79 Representative image for illustrative purposes, the item supplied will correspond to the indicated...

Box-mounted disconnector switches

Three-phase switch box 100A (4 poles) yellow-red control

MX-4100PY

€81.43 (€67.30 tax excl.)

Rotary switch, main disconnector 4 poles tetrapolar 100A . Mounted in polycarbonate box, with yellow-red drive lockable in "O" position. IP65 protection grade. Suitable for interrupting electrical circuits, as well as direct starting of motors and main switches in machines.Reference: MX-4100PY Representative image for illustrative purposes, the item...

Terminal signallers

Strip of 10 markers for terminals 80-89 TSKA Series

Marker 80-89

€0.36 (€0.30 tax excl.)

Strip with 10 independent markers with inscription of numbers from 80 to 89 for terminal blocks of the TSKA series. Quick and easy installation, it allows you to solve marking problems in cabinets and electrical installations. Reference: Marker Strip 80-89 Representative image for illustrative purposes, the item supplied will correspond to the indicated...

Terminal signallers

Strip of 10 markers for terminals 90-99 TSKA Series

Marker 90-99

€0.36 (€0.30 tax excl.)

Strip with 10 independent markers with inscription of numbers from 90 to 99 for terminal blocks of the TSKA series. Quick and easy installation, it allows you to solve marking problems in cabinets and electrical installations. Reference: Marker Strip 90-99 Representative image for illustrative purposes, the item supplied will correspond to the indicated...

Terminal signallers

Strip of 10 markers for L2 TSKA Series terminals

Marker L2

€0.36 (€0.30 tax excl.)

Strip with 10 independent markers with "L2" inscription for TSKA series terminals. Quick and easy installation, it allows you to solve marking problems in cabinets and electrical installations. Reference: Marker Strip L2 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

View

Terminal signallers

Strip of 10 markers for L3 TSKA Series terminals

Marker L3

€0.36 (€0.30 tax excl.)

Strip with 10 independent markers with "L3" inscription for TSKA series terminals. Quick and easy installation, it allows you to solve marking problems in cabinets and electrical installations. Reference: Marker Strip L3 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

View

Terminal signallers

Strip of 10 markers for N TSKA Series terminals

Marker N

€0.36 (€0.30 tax excl.)

Strip with 10 independent markers with "N" inscription for TSKA series terminals. Quick and easy installation, it allows you to solve marking problems in cabinets and electrical installations. Reference: Marker Strip N Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

View

Joint sleeves

Aluminum connection sleeve 70 mm2

ATH-70

€1.26 (€1.04 tax excl.)

tubular aluminum splicing sleeve for cable with section 70 mm 2 and length 105 mm. It has a central stop for better driver positioning and easy insertion. Reference: ATH-70 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Differential 4 poles 25A 30mA 10kA class A - OMU adajusa

Four-pole differential (4 poles)

Differential Circuit Breaker RCD 4 poles 25A 30mA 10kA class A - OMU

OMR104A25003

€25.66 (€21.21 tax excl.)

Three-phase differential 4 poles (3+N) 25A 0.03A (30mA) Class A. Electromagnetic type, which allows you not to lose protection in case of variation in voltage input and thus be able to maintain the protection of the active phase in case of neutral loss. High immunity to electrical noise, 10kA cutting power. Standard differential class "A". Ref:...

Joint sleeves

Aluminum connection sleeve 120 mm2

ATH-120

€1.84 (€1.52 tax excl.)

tubular aluminum splicing sleeve for cable with section 120 mm 2 and length 105 mm. It has a central stop for better driver positioning and easy insertion. Reference: ATH-120 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Differential 4 poles 40A 30mA 10kA Class A - OMU adajusa

Four-pole differential (4 poles)

Differential Circuit Breaker RCD 4 poles 40A 30mA 10kA Class A - OMU

OMR104A40003

€25.66 (€21.21 tax excl.)

Three-phase differential 4 poles (3+N) 40A 0.03A (30mA) Class A. Electromagnetic type, which allows you not to lose protection in case of variation in voltage input and thus be able to maintain the protection of the active phase in case of neutral loss. High immunity to electrical noise, 10kA cutting power. Standard differential class "A". Ref:...

Joint sleeves

Aluminum connection sleeve 185 mm2

ATH-185

€2.54 (€2.10 tax excl.)

tubular aluminum splicing sleeve for cable with section 185 mm 2 and length 125 mm. It has a central stop for better driver positioning and easy insertion. Reference: ATH-185 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Differential 4 poles 63A 30mA 10kA class A - OMU adajusa

Four-pole differential (4 poles)

Differential Circuit Breaker RCD 4 poles 63A 30mA 10kA Class A - OMU

OMR104A63003

€28.11 (€23.23 tax excl.)

Three-phase differential 4 poles (3+N) 63A 0.03A (30mA) Class A. Electromagnetic type, which allows you not to lose protection in case of variation in voltage input and thus be able to maintain the protection of the active phase in case of neutral loss. High immunity to electrical noise, 10kA cutting power. Standard differential class "A". Ref:...

Differential 4 poles 100A 30mA 10kA Class A - OMU adajusa

Four-pole differential (4 poles)

Differential Circuit Breaker RCD 4 poles 100A 30mA 10kA Class A - OMU

OMR104A100003

€33.00 (€27.27 tax excl.)

Three-phase differential 4 poles (3+N) 100A 0.03A (30mA) Class A. Electromagnetic type, which allows you not to lose protection in case of variation in voltage input and thus be able to maintain the protection of the active phase in case of neutral loss. High immunity to electrical noise, 10kA cutting power. Standard differential class "A". Ref:...

Differential 4 poles 25A 300mA omu systems adajusa

Four-pole differential (4 poles)

Differential Circuit Breaker RCD 4 poles 25A 300mA 10kA - OMU

OMR10402503

€19.11 (€15.79 tax excl.)

Three-phase differential 4 Poles (3+N) 25A 0.3A (300mA) 10kA AC class. Electromagnetic type, which allows you not to lose protection in case of variation in voltage input and thus be able to maintain the protection of the active phase in case of neutral loss. Standard "AC" class differential. Ref: OMR10402503

Differential 4 poles 40A 300mA omu systems adajusa

Four-pole differential (4 poles)

Differential Circuit Breaker RCD 4 poles 40A 300mA 10kA - OMU

OMR10404003

€19.11 (€15.79 tax excl.)

Three-phase differential 4 Poles (3+N) 40A 0.3A (300mA) 10kA AC class. Electromagnetic type, which allows you not to lose protection in case of variation in voltage input and thus be able to maintain the protection of the active phase in case of neutral loss. Standard "AC" class differential. Ref: OMR10404003

Differential 4 poles 63A 300mA omu systems adajusa

Four-pole differential (4 poles)

Differential Circuit Breaker RCD 4 poles 63A 300mA 10kA - OMU

OMR10406303

€20.33 (€16.80 tax excl.)

Three-phase differential 4 Poles (3+N) 63A 0.3A (300mA) 10kA AC class. Electromagnetic type, which allows you not to lose protection in case of variation in voltage input and thus be able to maintain the protection of the active phase in case of neutral loss. Standard "AC" class differential. Ref: OMR10406303

Buzzers

Luminous buzzer 24Vac/dc

AD22-22MR-R24

€4.60 (€3.80 tax excl.)

Luminous buzzer, sound indicator light, 22mm series, for a working voltage of 24Vac or 24Vdc. The color of the buzzer light indication is red via multiled.Reference: AD22-22MR/24Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Four-pole differential (4 poles)

Differential Circuit Breaker RCD 4 poles 100A 300mA 10kA - OMU

OMR10410003

€33.09 (€27.35 tax excl.)

Three-phase differential 4 Poles (3+N) 100A 0.3A (300mA) 10kA AC class. Electromagnetic type, which allows you not to lose protection in case of variation in voltage input and thus be able to maintain the protection of the active phase in case of neutral loss. Standard "AC" class differential. Ref: OMR10410003

Buzzers

Luminous buzzer 230V

AD22-22MRR230

€4.60 (€3.80 tax excl.)

Buzzer light, sound indicator light, 22mm series, for a working voltage of 220-230Vac. The color of the buzzer light indication is red via multiled.Reference: AD22-22MRSRepresentative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Differential 4 poles 25A 300mA 10kA Class A - omu systems Adajusa

Four-pole differential (4 poles)

Differential Circuit Breaker RCD 4 poles 25A 300mA 10kA Class A - OMU

OMR104A2503

€25.66 (€21.21 tax excl.)

Three-phase differential 4 poles (3+N) 25A 0.3A (300mA) Class A. Electromagnetic type, which allows you not to lose protection in case of variation in voltage input and thus be able to maintain the protection of the active phase in case of neutral loss. High immunity to electrical noise, 10kA cutting power. Standard differential class "A". Ref:...

Differential 4 poles 40A 300mA 10kA Class A - omu systems Adajusa

Four-pole differential (4 poles)

Differential Circuit Breaker RCD 4 poles 40A 300mA 10kA Class A - OMU

OMR104A4003

€25.66 (€21.21 tax excl.)

Three-phase differential 4 poles (3+N) 40A 0.3A (300mA) Class A. Electromagnetic type, which allows you not to lose protection in case of variation in voltage input and thus be able to maintain the protection of the active phase in case of neutral loss. High immunity to electrical noise, 10kA cutting power. Standard differential class "A". Ref:...

Differential 4 poles 63A 300mA 10kA Class A - omu systems Adajusa

Four-pole differential (4 poles)

Differential Circuit Breaker RCD 4 poles 63A 300mA 10kA Class A - OMU

OMR104A6303

€28.11 (€23.23 tax excl.)

Three-phase differential 4 poles (3+N) 63A 0.3A (300mA) Class A. Electromagnetic type, which allows you not to lose protection in case of variation in voltage input and thus be able to maintain the protection of the active phase in case of neutral loss. High immunity to electrical noise, 10kA cutting power. Standard differential class "A". Ref:...

Differential 4 poles 100A 300mA 10kA Class A - omu systems Adajusa

Four-pole differential (4 poles)

Differential Circuit Breaker RCD 4 poles 100A 300mA 10kA Class A - OMU

OMR104A10003

€33.00 (€27.27 tax excl.)

Three-phase differential 4 poles (3+N) 100A 0.3A (300mA) Class A. Electromagnetic type, which allows you not to lose protection in case of variation in voltage input and thus be able to maintain the protection of the active phase in case of neutral loss. High immunity to electrical noise, 10kA cutting power. Standard differential class "A". Ref:...

Isolated round terminals

Terminal bag diameter 6mm, cables 1.5-2.5mm

MSZ-2,5/6

€5.41 (€4.47 tax excl.)

Bag of 100 pre-insulated 6mm round terminals, for cables from 1.5mm² to 2.5mm², made of polyamide and tinned electrolytic copper . Color: Blue Terminal diameter: 6mm Reference: MSZ-2,5/6 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Distribution cabinet 12 modules for recessing

Distribution cabinet 12 modules for recessing 2

Distribution cabinets for recessing

Distribution cabinet 12 modules for recessing MLS series

MLS12PD

€15.89 (€13.13 tax excl.)

Distribution box for 12 elements, flush mounting. with ergonomic opening and closing system. Smoked transparent lid. Includes terminals for grounding Reference: MLS12PDRepresentative image for illustrative purposes, the item supplied shall correspond to the specifications indicated

MK series surface box without door for various adajusa

Modular distribution chests

Modular box 2 elements surface mount without MK series door

MK2

€1.46 (€1.21 tax excl.)

Modular box to accommodate switchboard and electrical elements (Differentials, magnetothermic ...), of 2 modules, mounting on surface or wall. Monoblock type without IP20 door.reference: MK2 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Modular distribution chests

Modular box 8 elements surface mount MLF series

MLF8PD

€14.69 (€12.14 tax excl.)

Modular box to accommodate switchbing and electrical elements (Differentials, magnetothermic ...), for 8 modules with lid, mounting on surface or wall.reference: MLF8 PD 8 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Modular distribution chests

Modular box 4 elements surface mount without MK series door

MK4

€1.84 (€1.52 tax excl.)

Modular box to accommodate switchbing and electrical elements (Differentials, magnetothermic ...), of 4 modules, mounting on surface or wall. Monoblock type without IP20 door.reference: MK4 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Modular distribution chests

Modular box 6 elements surface mount without MK series door

MK6

€3.25 (€2.69 tax excl.)

Modular box to accommodate switchboard and electrical elements (Differentials, magnetothermic ...), of 6 modules, mounting on surface or wall. Monoblock type without IP20 door.reference: MK6 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

View

Modular distribution chests

Modular box 8 elements surface mount without MK series door

MK8

€3.81 (€3.15 tax excl.)

Modular box to accommodate switchboard and electrical elements (Differentials, magnetothermic ...), of 8 modules, mounting on surface or wall. Monoblock type without IP20 door.reference: MK8 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Modular distribution chests

Modular box 4 elements surface mount MLF series

MLF4PD

€12.08 (€9.98 tax excl.)

Modular box to accommodate switchgear and electrical elements (Differentials, magnetothermics ...), for 4 modules with lid, mounting on surface or wall.Reference: MLF4 PD 4 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Modular distribution chests

Modular box 12 elements surface mount MLF series

MLF12PD

€17.47 (€14.44 tax excl.)

Modular box to accommodate switchboard and electrical elements (Differentials, magnetothermic ...), for 12 modules with lid, mounting on surface or wall.Reference: MLF12 PD 12Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Modular distribution chests

Modular box 24 elements surface mount MLF series

MLF24PD

€30.67 (€25.35 tax excl.)

Modular box to accommodate switchboard and electrical elements (Differentials, magnetothermic ...), for 24 modules with lid, mounting on surface or wall.reference: MLF24 PD 24 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Modular distribution chests

Modular box 36 elements surface mount MLF series

MLF36PD

€38.13 (€31.51 tax excl.)

Modular box to accommodate switchboard and electrical elements (Differentials, magnetothermic ...), for 36 modules with lid, mounting on surface or wall.reference: MLF36 PD 36 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Modular distribution chests

Modular box 10 elements surface mount MFKV series

MFKV10/8

€11.88 (€9.82 tax excl.)

Modular box to accommodate switchboard and electrical elements (Differentials, magnetothermic ...), for 10 modules with lid, mounting on surface or wall, with a smoked transparent door. IP protection grade 66.reference: MFKV10/8Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Modular distribution chests

Modular box 14 elements surface mount MFKV series

MFKV14

€20.73 (€17.13 tax excl.)

Modular box to accommodate switchboard and electrical elements (Differentials, magnetothermic ...), for 14 modules with lid, mounting on surface or wall, with a smoked transparent door. IP protection grade 66. reference: MFKV14Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Modular distribution chests

Modular box 20 elements surface mount MFKV series

MFKV20/16

€20.99 (€17.35 tax excl.)

Modular box to accommodate switchboard and electrical elements (Differentials, magnetothermic ...), for 20 modules with lid, mounting on surface or wall, with a smoked transparent door. IP protection grade 66.reference: MFKV20/16 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

View

Minimum voltage firing coil for OMO System MCB circuit breakers adajusa

Accessories for MCB circuit breakers and differential

Over or under voltage trip coil for thermal magnetic switches - OMU

OMBAUNTF

€12.57 (€10.39 tax excl.)

Voltage trigger coil (230Vac), causes the circuit breaker to trip when the voltage drops below a certain value, and also causes the circuit breaker to trip when it exceeds a certain value. Location: left side of the circuit breaker.Reference: OMBAUNTF Representative image for illustrative purposes, the item supplied will correspond to the...

Maganetothermal shooting coil - omu systems Adajusa

Accessories for MCB circuit breakers and differential

Emission coil (Trip) - OMU

OMBAUSHU

€12.20 (€10.08 tax excl.)

Emission coil, trip coil for circuit breaker, nominal operating voltage 230 Vac. It triggers the trip of the circuit breaker to which it is associated when it receives voltage, allowing a circuit breaker to be triggered from a distance. It has a status indicator. Location on the left side of the mangnetothermal. Representative image for illustrative...

Accessories for MCB circuit breakers and differential

Alarm contact for MCB circuit breakers - OMU

OMBAUALM

€6.51 (€5.38 tax excl.)

Alarm contact for MCB circuit breaker of the brand omu systems, with 1 contact switched NA/NC, indicates when a shot has occurred in the MCB circuit breaker to which it is associated, is placed on the left side of the MCB circuit breaker.OMBAUALM Reference

Luminous modular indicator green adajusa.es

Accessories for MCB circuit breakers and differential

Green modular light indicator - OMU

OSL230G

€2.78 (€2.30 tax excl.)

Green modular light indicator for DIN rail mounting. Connected by cables or collector bars (connection combs). Degree of protection IP20.Ref: OSL230GRepresentative image for illustrative purposes, the supplied article is subject to the specifications indicated.

Luminous modular indicator red adajusa.es

Accessories for MCB circuit breakers and differential

Red modular light indicator - OMU

OSL230R

€2.78 (€2.30 tax excl.)

Red modular light indicator for DIN rail mounting. Connected by cables or collector bars (connection combs). Degree of protection IP20.Ref: OSL230RRepresentative image for illustrative purposes, the supplied article is subject to the specifications indicated.

Luminous modular indicator white adajusa.es

Accessories for MCB circuit breakers and differential

White modular light indicator - OMU

OSL230W

€2.78 (€2.30 tax excl.)

White modular light indicator for DIN rail mounting. Connected by cables or collector bars (connection combs). Degree of protection IP20.Ref: OSL230WRepresentative image for illustrative purposes, the supplied article is subject to the specifications indicated.

Single-phase electric power meter 1 DIN rail module

Measuring instruments

Single-phase MID electric power meter 1 DIN rail module

MID-MN-1D

€28.89 (€23.88 tax excl.)

Electric power meter for 230Vac single phase installations, active power meter, allows to control the consumption of an installation. DIN rail mounting, digital indication on LCD display. Maximum direct measured current 45A. Complies with MID regulations on measuring instruments. Reference: MID-MN-1D

Measuring instruments

Electric power counter MID-FM-3D three-phase DIN rail

MID-FM-3D

€74.44 (€61.52 tax excl.)

Electric power meter for three-phase installations 3x230/400Vac, active power meter, allows to control the consumption of an installation. DIN rail mounting, digital indication on LCD display. Maximum direct measured current 80A. Complies with MID regulations on measuring instruments. Reference: MID-FM-3D

Motor guard circuit breakers motor protection

Motor circuit breaker 40 to 63A

MOV3-63

€73.11 (€60.42 tax excl.)

Three-phase Motor circuit breaker for protection of electric motors. The regulation of the motor protection circuit breaker is between 40 and 63 A. The installation of a motor protection circuit breaker makes it possible to prevent the breakdown of electric motors, both single-phase and three-phase, due to overload or failure of a phase in the motor...

View

Motor guard circuit breakers motor protection

Motor circuit breaker 56 to 80A

MOV3-80

€73.11 (€60.42 tax excl.)

Three-phase Motor circuit breaker for protection of electric motors. The regulation of the motor protection circuit breaker is between 56 and 80A. The installation of a motor protection circuit breaker prevents the breakdown of electric motors, both single-phase and three-phase, due to overload or failure of a phase in the motor control circuit.Reference:...

Motor starter 0,5CV 230V single-phase with contactor | Adajusa

Motor starter 0,5CV 230V single-phase with contactor | Adajusa 2

Pack

Contactor starter single-phase motor 220/230V

Motor starter 0.5 hp 230V single phase with contactor

992ADC2200371

€30.27 (€25.02 tax excl.)

Direct starter box for 0.37Kw (0.5CV) 220/230 V single-phase motors , with thermal relay for motor protection, start stop buttons included. Reference: ADC2200371 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Metric thread glands

Glands M12 grey polyamide with nut

XBS-M12

€0.16 (€0.13 tax excl.)

Polyamide (Nylon) glands with M12x1.5mm thread, NUT and NBR gasket included. Grey.Ref: XBS-M12 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Metric thread glands

Glands M16 grey polyamide with nut

XBS-M16

€0.22 (€0.18 tax excl.)

Polyamide (Nylon) glands with M16x1.5mm thread, NUT and NBR gasket included. Grey.Ref: XBS-M16 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Metric thread glands

Glands M20 grey polyamide with nut

XBS-M20

€0.24 (€0.20 tax excl.)

Polyamide (Nylon) cable car presses with M20x1.5mm thread, nut and NBR gasket included. Grey.Reference: XBS-M20 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Metric thread glands

Glands M25 grey polyamide with nut

XBS-M25

€0.42 (€0.35 tax excl.)

Polyamide (Nylon) glands with M25x1.5mm thread, NUT and NBR gasket included. Grey.Ref: XBS-M25 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Metric thread glands

Glands M32 grey polyamide with nut

XBS-M32

€0.62 (€0.51 tax excl.)

Polyamide (Nylon) glands with M32x1.5mm thread, NUT and NBR gasket included. Grey.Ref: XBS-M32 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Metric thread glands

Glands M40 grey polyamide with nut

XBS-M40

€1.68 (€1.39 tax excl.)

Polyamide (Nylon) glands with M40x1.5mm thread, nut and NBR gasket included. Grey.Reference: XBS-M40 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Metric thread glands

Glands M50 grey polyamide with nut

XBS-M50

€2.20 (€1.82 tax excl.)

Polyamide (Nylon) glands with M50x1.5mm thread, NUT and NBR gasket included. Grey.Ref: XBS-M50 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Metric thread glands

Glands M63 grey polyamide with nut

XBS-M63

€2.69 (€2.22 tax excl.)

Polyamide (Nylon) glands with M63x1.5mm thread, NUT and NBR gasket included. Grey.Ref: XBS-M63 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Pg thread glands

Cable gland PG7 polyamide with nut

XBS-PG7

€0.12 (€0.10 tax excl.)

Polyamide (Nylon) Cable gland , PG7 thread, with nut, nitrile (NBR) gasket. IP68 protection grade. Color Light gray, RAL 7035.Reference: XBS -PG7 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Pg thread glands

Cable glands PG9 polyamide with nut

XBS-PG9

€0.22 (€0.18 tax excl.)

Polyamide (Nylon) cable gland PG9 thread, with nut, nitrile (NBR) gasket. Degree of protection IP68. Color Light grey, RAL 7035.Reference: XBS-PG9 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pg thread glands

Cable glands PG11 polyamide with nut

XBS-PG11

€0.22 (€0.18 tax excl.)

Polyamide (Nylon) cable gland PG11 thread, with nut, nitrile (NBR) gasket. Degree of protection IP68. Color Light grey, RAL 7035.Reference: XBS-PG11 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pg thread glands

Cable glands PG13.5 polyamide with nut

XBS-PG13,5

€0.24 (€0.20 tax excl.)

Polyamide (Nylon) cable gland PG13,5 thread, with nut, nitrile (NBR) gasket. Degree of protection IP68. Color Light gray, RAL 7035.Reference: XBS-PG13 ,5 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pg thread glands

Cable glands PG16 polyamide with nut

XBS-PG16

€0.30 (€0.25 tax excl.)

Polyamide (Nylon) cable gland PG16 thread, with nut, nitrile (NBR) gasket. Degree of protection IP68. Color Light grey, RAL 7035.Reference: XBS-PG16 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pg thread glands

Cable glands PG21 polyamide with nut

XBS-PG21

€0.48 (€0.40 tax excl.)

Polyamide (Nylon) cable gland PG21 thread, with nut, nitrile (NBR) gasket. Degree of protection IP68. Color Light gray, RAL 7035.Ref: XBS-PG21 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pg thread glands

PG29 polyamide Cable gland with nut

XBS-PG29

€0.86 (€0.71 tax excl.)

Polyamide (Nylon) Cable gland with PG29 thread, with nut, nitrile (NBR) gasket. IP68 protection grade. Color Light gray, RAL 7035. Reference: XBS -PG29 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Pg thread glands

PG36 polyamide Cable gland with nut

XBS-PG36

€1.68 (€1.39 tax excl.)

Polyamide (Nylon) Cable gland , PG36 thread, with nut, nitrile (NBR) gasket. IP68 protection grade. Color Light gray, RAL 7035. Reference: XBS -PG36 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Pilots

Pilot red multiled 230 Vac 22mm

AD22/R/230

€1.40 (€1.16 tax excl.)

Pilot multiled redluminous, voltage 230 Vac, diameter 22mm. High brightness and long life led chip.Reference: AD22/R/230 - AD22-22DS-R23Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Pilots

Pilot multiled red color 24 Vdc or Vac 22mm

AD22/R/24

€1.40 (€1.16 tax excl.)

Pilot redmultiled light, voltage 24 Vdc or Vac, diameter 22mm. High luminosity and long life led chip.Reference: AD22/R/24 - AD22-22DS-R24 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Pilots

Pilot green multiled 230 Vac 22mm

AD22/G/230

€1.40 (€1.16 tax excl.)

Pilot greenmultiled luminous, voltage 230 Vac, diameter 22mm. High luminosity and long life chip.Reference: AD22/G/230 - AD22-22DS-G23 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Yellow multiled pilot (amber) 230 Vac 22mm

Pilots

Pilot yellow multiled (amber) 230 Vac 22mm

AD22/Y/230

€1.40 (€1.16 tax excl.)

Pilot yellow (amber)multiled luminous, voltage 230 Vac, diameter 22mm. High luminosity and long life led chip. Part number: AD22/Y/230 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Pilots

Pilot multiled blue color 230 Vac 22mm

AD22/BL/230

€1.40 (€1.16 tax excl.)

Pilot multiled blue color, voltage 230 Vac, diameter 22mm. High brightness and long life led chip. Reference: AD22/BL/230 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Pilots

Pilot multiled white color 230 Vac 22mm

AD22/W/230

€1.40 (€1.16 tax excl.)

Pilot multiled luminous white color, voltage 230 Vac, diameter 22mm. High luminosity and long life led chip. Part number: AD22/W/230 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Pilots

Pilot multiled green color 24 Vdc or Vac 22mm

AD22/G/24

€1.40 (€1.16 tax excl.)

Pilot greenmultiled luminous, voltage 24 Vdc or Vac, diameter 22mm. High luminosity and long life led chip.Reference: AD22/G/24 - AD22-22DS-G24 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Yellow multiled pilot (amber) 24 Vdc or Vac 22mm

Pilots

Pilot multiled yellow (amber) 24 Vdc or Vac 22mm

AD22/Y/24

€1.40 (€1.16 tax excl.)

Pilot yellow (amber)multiled light, voltage 24 Vdc or Vac, diameter 22mm. High luminosity and long life led chip. Part no.: AD22/Y/24 - AD22-22DS-Y24 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Pilots

Pilot multiled blue color 24 Vdc or Vac 22mm

AD22/BL/24

€1.40 (€1.16 tax excl.)

Pilot bluemultiled luminous, voltage 24 Vdc or Vac, diameter 22mm. High brightness and long life led chip. Part number: AD22/BL/24 - AD22-22DS-B24 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Pilots

Pilot multiled white color 24 Vdc or Vac 22mm

AD22/W/24

€1.40 (€1.16 tax excl.)

Pilot whitemultiled luminous, voltage 24 Vdc or Vac, diameter 22mm. High brightness and long life LED chip. Reference: AD22/W/24 - AD22-22DS-W24 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Buttons

Closed contact red pushbutton (NC) complete

EA42

€1.55 (€1.28 tax excl.)

Industrialelectric push button, red color and with a closed contact (NC). The electric push button can be mounted on 22mm through holes. The main use of the electric push button is to be mounted on electrical control panels of machinery and on electrical control boxes in general. Made of plastic material. Complete push button with one closed...

Buttons

Full Contact Green Pushbutton (NA)

NG22-EA31

€1.55 (€1.28 tax excl.)

Industrialelectric push button, green color with one open contact (NO). The electric push button can be mounted on 22mm through holes. The main use of the electric push button is the mounting on electrical control panels of machinery, and on electrical control boxes in general. Made of plastic material. The supply includes the complete push button with...

Buttons

Black open contact pushbutton (NA) complete

EA21

€1.55 (€1.28 tax excl.)

Black industrialelectric push button with one open contact (NO). The electric push button can be mounted on 22mm through holes. The main use of the electric push button is the mounting on electrical control panels of machinery and on electrical control boxes in general. Made of plastic material. The supply includes the complete pushbutton with an open...

Buttons

Open contact

NG22-BE101

€0.69 (€0.57 tax excl.)

Open contact (NO) to be mounted on metal or plastic electric pushbuttons. Reference: NG22-BE101 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Buttons

Closed contact

NG22-BE102

€0.69 (€0.57 tax excl.)

Closed Contact (NC). To be mounted on electric pushbuttons, both plastic and metal, XB2 series.Reference: NG22-BE102 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Double luminous metal pushbutton (March-Stop) 2 open and closed contacts (NA+NC) complete

Buttons

Luminous metal pushbutton gear stop contacts open NA and closed NC complete

BW8465

€5.47 (€4.52 tax excl.)

Buttons

Luminous red metal button complete closed contact (NC)

NG22-BW3461

€3.46 (€2.86 tax excl.)

Metal pushbutton, in luminous red color, with a closed contact (NC). 22mm series. The supply includes the complete illuminated push button, with a closed contact, it does not include a bulb.Reference: NG22-BW3461 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Luminous green metal pushbutton open contact (NA) complete

Buttons

Luminous green metal pushbutton full open contact (NO)

NG22-BW3361

€3.46 (€2.86 tax excl.)

Green, luminous metallic pushbutton, with an open contact (NO). 22mm series. The supply includes the complete illuminated push button, with an open contact, it does not include a bulb. Reference: NG22-BW3361 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Emergency stop pushbutton diameter 40 mm

Emergency stop pushbutton diameter 40 mm 2

Stop and emergency pushbuttons

Full-size screen stop pushbutton 40 mm

ES542

€2.44 (€2.02 tax excl.)

Stop pushbutton type mushroom-head, made of plastic material, diameter 40 mm and with interlocking, twist release, 1 closed contact (NC). The supply includes the complete pushbutton with one closed contact.Part number: NG22-ES542 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Selector 2 key positions 1 open contact (NA)

Selector 2 key positions 1 open contact (NA) 2

Selectors

Selector 2 key positions (Off) 1 open contact (NA) complete

EG21

€3.18 (€2.63 tax excl.)

Key-operated selector switch, 2 positions maintained and made of plastic material, 1 open contact (NO). The delivery includes the complete selector with one open contact and key. The key can be inserted or removed only in "Off" position.Part number: NG22-EG21 Representative image for illustrative purposes, the item supplied will correspond to the...

Pushbutton boxes

Button box 4 elements diameter 22 plastic

XDL5-B04

€5.84 (€4.83 tax excl.)

Button box for 4 elements diameter 22 mm in gray plastic. Reference: XDL5-B04 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Pushbutton boxes

Button box 5 elements diameter 22 plastic

XDL5-B05

€7.20 (€5.95 tax excl.)

Button box for 5 elements, diameter 22 mm, in gray plastic.Reference: XDL5-B05 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

MCB circuit breaker 1 pole OMU adajusa OMB06101C

MCB circuit breakers 1 pole

Circuit breaker 1 pole 1A curve C - OMU

OMB06101C

€2.12 (€1.75 tax excl.)

MCB circuit breaker 1 pole 1A curve C, for protection against short circuits and overloads. With an assigned cutting power of 6000A. Active protection with individual status indication. Manufacturer's Reference: OMB06101C Representative image for illustrative purposes, the supplied article is subject to the specifications indicated.

Pushbutton boxes

Button box 6 elements diameter 22 plastic

XDL5-B06

€8.82 (€7.29 tax excl.)

Button box for 6 elements diameter 22 mm in gray plastic.Reference: XDL5-B06

Three-phase 3-poles disconnector switches

Yellow-red 20A three-phase disconnector switch

MX-320Y

€9.37 (€7.74 tax excl.)

Rotary switch, three-phase main disconnector 20A. 0-I, with yellow-red drive, lockable in position O. Front panel size 66x66 mm. Suitable for interruption, connection and switching of electrical circuits, as well as direct start of motors and main switch in machines.Reference: MX-320Y Representative image for illustrative purposes, the item supplied...

25A disconnector switch, 3 Adajusa poles

Three-phase 3-poles disconnector switches

Yellow-red 25A three-phase disconnector switch

MX-325Y

€14.53 (€12.01 tax excl.)

Rotary switch, three-phase main disconnector 25A. 0-I, with yellow-red drive, lockable in position O. Front panel size 66x66 mm. Suitable for interruption, connection and switching of electrical circuits, as well as direct start of motors and main switch in machines.Reference: MX-325Y Representative image for illustrative purposes, the item supplied...

Selectors

Selector 2 positions 1 no (NA) full long lever

EJ21

€1.78 (€1.47 tax excl.)

Long lever selector 2 positions held, 1 no (NA). The supply includes a selector and a no.Reference: NG22-EJ21

Selectors

Selector 3 positions 2 open contacts (NA) full long lever

NG22-EJ33

€2.44 (€2.02 tax excl.)

Long lever selector 3 positions maintained, 2 open contacts (NA). The supply includes a selector and a no.Reference: NG22-EJ33

Box-mounted disconnector switches

Three-phase switch box 20A (3 poles) yellow-red control

MX-320PY

€14.45 (€11.94 tax excl.)

Three-phase main disconnector rotary switch 20A mounted in polycarbonate box, with yellow-red drive lockable in "O" position. Degree of protection IP-65. Suitable for interruption of electrical circuits, as well as direct start of motors and main switch in machines.Reference: MX-320PY Representative image for illustrative purposes, the item supplied...

32A disconnector switch, 3 Adajusa poles

Three-phase 3-poles disconnector switches

Three-phase disconnector switch 32A yellow-red

MX-332Y

€14.94 (€12.35 tax excl.)

Rotary switch, three-phase main disconnector 32A. 0-I, with yellow-red drive, lockable in position O. Front panel size 66x66 mm. Suitable for interruption, connection and switching of electrical circuits, as well as direct start of motors and main switch in machines.Reference: MX-332Y Representative image for illustrative purposes, the item supplied...

40A disconnector switch, 3 Adajusa poles

Three-phase 3-poles disconnector switches

Yellow-red 40A three-phase disconnector switch

MX-340Y

€17.65 (€14.59 tax excl.)

Rotary switch, three-phase main disconnector 40A. 0-I, with yellow-red drive, lockable in position O. Front panel size 66x66 mm. Suitable for interruption, connection and switching of electrical circuits, as well as direct start of motors and main switch in machines.Reference: MX-340Y Representative image for illustrative purposes, the item supplied...

63A disconnector switch, 3 Adajusa poles

Three-phase 3-poles disconnector switches

Yellow-red 63A three-phase disconnector switch

MX-363Y

€32.50 (€26.86 tax excl.)

Rotary switch, three-phase main disconnector 63A. 0-I, with yellow-red drive, lockable in position O. Front panel size 88x88 mm. Suitable for interruption, connection and switching of electrical circuits, as well as direct start of motors and main switch in machines.Reference: MX-363Y Representative image for illustrative purposes, the item supplied...

100A disconnector switch, 3 Adajusa poles

Three-phase 3-poles disconnector switches

Yellow-red 100A three-phase disconnector switch

MX-3100Y

€45.13 (€37.30 tax excl.)

Rotary switch, three-phase main disconnector 100A. 0-I, with yellow-red drive, lockable in position O. Front panel size 88x88 mm. Suitable for interruption, connection and switching of electrical circuits, as well as direct start of motors and main switch in machines.Reference: MX-3100Y Representative image for illustrative purposes, the item supplied...

Box-mounted disconnector switches

Three-phase switch box 25A (3 poles) yellow-red control

MX-325PY

€19.72 (€16.30 tax excl.)

Box-mounted disconnector switches

Three-phase switch box 32A (3 poles) yellow-red control

MX-332PY

€22.83 (€18.87 tax excl.)

Box-mounted disconnector switches

Three-phase switch box 40A (3 poles) yellow-red control

MX-340PY

€27.08 (€22.38 tax excl.)

Box-mounted disconnector switches

Three-phase switch box 63A (3 poles) yellow-red control

MX-363PY

€59.58 (€49.24 tax excl.)

Box-mounted disconnector switches

Three-phase switch box 100A (3 poles) yellow-red control

MX-3100PY

€77.63 (€64.16 tax excl.)

Pilots

Pilot with neon indicator green 230Vac 12mm

07920ZO

€1.92 (€1.59 tax excl.)

Green signal light with neon pilot, voltage 230Vac, diameter 12mm, length 39mm. Neon pilot with orange lighting of high luminosity and long duration.Reference: 07920ZO

View

Power relay 3 contacts 10A 230Vac R-3 Adajusa

Power relay 3 contacts 10A 230Vac R-3 Adajusa 2

Solid-state and electromagnetic relays

Power relay 3 contacts 230Vac

R-3 230VAC

€3.71 (€3.07 tax excl.)

Power relay with 3 switched contacts, 10A, 230Vac. For general purpose and industrial applications, ability to handle high loads. To be mounted on undecal plinth (11 pins).Reference: R-3 Relay 230VAC Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Solid-state and electromagnetic relays

Miniature relay 230Vac 2 contacts 8A SERIES 40 - FINDER

40.52.8.230

€10.27 (€8.49 tax excl.)

Mini relay type 40.52 for printed circuit and pluggable in sockets, 230Vac and 2 changeover contacts of 8A on printed circuit . Reference: 40.52.8.230 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Solid-state and electromagnetic relays

Miniature relay 24Vdc 2 contacts 8A SERIES 40 - FINDER

40.52.9.024

€5.80 (€4.79 tax excl.)

Mini relay type 40.52 for printed circuit and pluggable in sockets, 24Vdc and 2 switched contacts of 8A in printed c.To be mounted on printed circuit board (PCB) or in socket on din-rail.SKU: 40.52.9.024 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Miniature Relay Base 2 Contacts Series 95 FINDER

Solid-state and electromagnetic relays

Miniature relay base 2 contacts SERIES 95 - FINDER

95.05

€6.96 (€5.75 tax excl.)

Base for miniature relay of 2 contacts and 8 pins, for mounting on din-rail of 35mm or panel mounting.Reference: 95.05Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Relay 4 contacts 7A, 24Vdc FINDER series 55

Relay 4 contacts 7A, 24Vdc FINDER series 55 2

Solid-state and electromagnetic relays

Relay 24Vdc 4 contacts 7A SERIES 55 - FINDER

55.34.9.024

€11.58 (€9.57 tax excl.)

4-contact relay 24Vdc and 7A, with lockable test button and mechanical indicator. 4 switched contacts (4PDT). For general purpose and industrial applications, ability to handle medium loads. Flat pin for connection on base or welding directly.Reference: 55.34.9.024.0040Representative image for illustrative purposes, the item supplied will correspond to...

Miniature relay 4 contacts 7A, 24Vdc FINDER series 55

Miniature relay 4 contacts 7A, 24Vdc FINDER series 55 2

Solid-state and electromagnetic relays

Relay 24Vac 4 contacts 7A SERIES 55 - FINDER

55.34.8.024

€11.20 (€9.26 tax excl.)

4-contact relay 24Vac and 7A, with lockable test button and mechanical indicator. 4 switched contacts (4PDT). For general purpose and industrial applications, ability to handle medium loads. Flat pin for connection on base or welding directly. Reference: 55.34.8.024.0040Representative image for illustrative purposes, the item supplied will correspond to...

Solid-state and electromagnetic relays

Relay base 4 contacts SERIES 94 - FINDER

94.04

€7.16 (€5.92 tax excl.)

Base for relay of 4 contacts, flat pin and 14 pins, for mounting on din-rail of 35mm or mounting in panel.Reference: 94.04Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pilots

Pilot with neon indicator orange 230Vac 12mm

07920NA

€1.92 (€1.59 tax excl.)

Orange signal light with neon pilot, voltage 230Vac, diameter 12mm, length 39mm. Neon pilot with orange lighting of high luminosity and long duration.Reference: 07920NA

Pilots

Pilot with neon indicator red 230Vac 12mm

07920PI

€1.92 (€1.59 tax excl.)

Red signal light with neon pilot, voltage 230Vac, diameter 12mm, length 39mm. Neon pilot with orange lighting of high luminosity and long duration.Reference: 07920PI

90º monoconnection connector | Adajusa 2

Combs for electrical connection

Monoconnection connector for cable 16mm2 - 90º

BK/16

€1.03 (€0.85 tax excl.)

Conector monoconexión con ángulo de entrada del cable 90º. Cable de sección máxima 16mm2, corriente nominal 63A . Referencia: BK/16

Crimper for ferrules from 0.5 to 4mm2 ERV4 | ADAJUSA

Tools

Crimper for ferrules from 0.5 to 4 mm2

ERV-4

€11.66 (€9.64 tax excl.)

Easy-to-use crimping tool for insulated and uninsulated ferrules, with non-slip PVC grip and clamp made of high-quality steel, suitable for crimping ferrules with wire cross-section from 0.5 to 4 mm2. Rectangular crimping shape. Part No.: ERV4Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Crimper for ferrules from 0.25 to 10mm1 ERVN-10

Crimper for ferrules from 0.25 to 10mm1 ERVN-10 2

Tools

Toe crimper from 0.25 to 10 mm2

ERVN-10

€28.13 (€23.25 tax excl.)

Easy-to-use crimping tool for insulated and uninsolated toe caps, with non-slip PVC grip and high-quality steel jaw, suitable for pressing toe caps with cable diameter from 0.25 to 10 mm2. Rectangular crimp shape. Reference: ERVN-10Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Crimper for ferrules from 6 to 16mm2 ERV16 | ADAJUSA

Tools

Crimper for ferrules from 6 to 16 mm2

ERV-16

€15.22 (€12.58 tax excl.)

Easy-to-use crimping tool for insulated and uninsulated ferrules, with non-slip PVC grip and clamp made of high-quality steel, suitable for crimping ferrules with cable cross-section from 6 to 16 mm2. Rectangular crimping shape. Part No.: ERV16Representative image for illustrative purposes, the article supplied will correspond to the specifications...

Crimper for ferrules from 10 to 35mm2 ERV35 | ADAJUSA

Crimper for ferrules from 10 to 35mm2 ERV35 | ADAJUSA 2

Tools

Ferrule crimper from 10 to 35 mm2

ERV-35

€15.22 (€12.58 tax excl.)

Easy-to-use crimping tool for insulated and uninsulated ferrules, with non-slip PVC grip and clamp made of high-quality steel, suitable for crimping ferrules with cable cross-section from 10 to 35 mm2. Rectangular crimping shape. Part No.: ERV35Representative image for illustrative purposes, the article supplied will correspond to the specifications...

Crimper for ferrules from 6 to 16mm2 ERVN-16 | ADAJUSA

Tools

Crimper for ferrules from 6 to 16 mm2

ERVN-16

€37.24 (€30.78 tax excl.)

Easy-to-handle crimping tool for insulated and non-insulated ferrules, with non-slip PVC handle and high-quality steel jaw, suitable for crimping ferrules with cable sections from 6 to 16 mm 2 . Square crimp shape. Reference: ERVN-16Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Coaxial cable crimper RG 58/59/6 COAX2 | ADAJUSA

Coaxial cable crimper RG 58/59/6 COAX2 | ADAJUSA 2

Tools

Crimper for coaxial cable RG 58/59/6

COAX2

€14.87 (€12.29 tax excl.)

Easy-to-handle tool for crimping BNC terminals on RG58, RG59 and RG6 type coaxial cable. It has a non-slip PVC handle and a high-quality steel jaw. Hex Crimp Shape Reference: COAX2Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Flat screwdriver VDE 1000V 2.5x0.4x80mm 2

Tools

Flat screwdriver insulation VDE 1000V 2.5x80mm

SL2,5

€2.26 (€1.87 tax excl.)

Flat screwdriver with VDE 1000V isolation . Measures 2.5x0.4x80mm, magnetized tip and insulated handle. Easy handling thanks to its light weight and ergonomic handle, making it an ideal tool for daily use and various applications. Recommended for electrical work.Reference: SL2.5 Representative image for illustrative purposes, the supplied article will...

Tools

Isolation screwdriver set VDE 1000V

CSK

€25.66 (€21.21 tax excl.)

Set of 6 VDE 1000V isolation screwdrivers with magnetized tip and insulated handle. Easy handling thanks to its light weight and ergonomic handle, ideal for daily use. Recommended for electrical work. It includes: 4 flat screwdrivers: 2 Phillips screwdrivers Reference: CSK Representative image for illustrative purposes, the supplied article...

Tools

Pole-seeking screwdriver 200-250V

5104

€1.22 (€1.01 tax excl.)

Pole-seeking screwdriver for checking voltage in cables and conductors, suitable for detecting voltages between 200 and 250Vac. Metal tip and insulated plastic handle. Reference: 5104Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Terminal crimper for cables from 0.5 to 6mm2

Terminal crimper for cables from 0.5 to 6mm2 2

Tools

Pre-insulated terminal crimper from 0.5 to 6mm2

PR-2

€14.76 (€12.20 tax excl.)

Crimpadora for insulated faston terminals and similar, with non-slip PVC grip and high quality steel grip, suitable for pressing insulated terminals with cable diameter from 0.5 to 6mm2. Adjustable pressing force. Reference: PR-2Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Tools

Terminal crimper copper terminals from 6 to 50 mm2

PR-3

€37.24 (€30.78 tax excl.)

Swivel head crimping tool for copper terminals, with non-slip PVC handle and high quality steel clamp , suitable for crimping non-insulated terminals with cable cross section from 6 to 50 mm 2 . Adjustable crimping force. Reference: PR-3 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Tools

Cable peeling and cutting tool from 0.08 to 6 mm2

BL-STR

€16.47 (€13.61 tax excl.)

Tool for cutting and peeling cables of section between 0.08 - 6 mm2. It has an ergonomic and non-slip handle for proper handling and precise cable peeling. Reference: BL-STRRepresentative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Tools

Tool for peeling and cutting cables from 0.2 to 6 mm2

BL-006

€16.76 (€13.85 tax excl.)

Tool for peeling and cutting cables of section between 0.2 - 6 mm2. It has an ergonomic and non-slip handle for proper handling and precise cable peeling. Reference: BL-006Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Tools

Isolation phillips screwdriver VDE1000V 2x100mm

PH2

€4.33 (€3.58 tax excl.)

Phillips or star screwdriver with VDE 1000V isolation . Measures 2x100mm, magnetized tip and insulated handle. Light weight and ergonomic handle, recommended for electrical work.Reference: PH2 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Tools

isolation phillips screwdriver VDE1000V 1x100mm

PH1

€3.62 (€2.99 tax excl.)

Phillips or star screwdriver with VDE 1000V isolation . Measures 1x100mm, magnetized tip and insulated handle. Light weight and ergonomic handle, recommended for electrical work.Reference: PH1 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Tools

Isolation phillips screwdriver VDE 1000V 0x75mm

PH0

€3.11 (€2.57 tax excl.)

Phillips or star screwdriver with VDE 1000V isolation . Measurements 0x75mm, magnetized tip and insulated handle. Light weight and ergonomic handle, recommended for electrical work.Reference: PH0 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Flat screwdriver VDE 1000V 3x0.5x100mm 2

Tools

Flat screwdriver VDE insulation 1000V 3x100mm

SL3

€1.75 (€1.45 tax excl.)

Destornillador plano con aislamiento VDE 1000V. Medidas 3,0x0,5x100mm, punta magnetizada y mango aislado. Peso ligero y mango ergonómico, recomendado para trabajos eléctricos. Referencia: SL3 Imagen representativa para fines ilustrativos, el artículo suministrado corresponderá a las especificaciones indicadas.

Flat screwdriver VDE 1000V 4.0x0.8x100mm

Flat screwdriver VDE 1000V 4.0x0.8x100mm 2

Tools

Flat screwdriver insulation VDE 1000V 4x100mm

SL4

€3.52 (€2.91 tax excl.)

Flat screwdriver with VDE 1000V isolation . Measures 4.0x0.8x100mm, magnetized tip and insulated handle. Light weight and ergonomic handle, recommended for electrical work.Reference: SL4 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Flat screwdriver VDE 1000V 5.5x1.0x125mm

Flat screwdriver VDE 1000V 5.5x1.0x125mm 2

Tools

Flat screwdriver insulation VDE 1000V 5.5x125mm

SL5,5

€3.57 (€2.95 tax excl.)

Flat screwdriver with VDE 1000V isolation . Measures 5.5x1.0x125mm, magnetized tip and insulated handle. Light weight and ergonomic handle, recommended for electrical work.Reference: SL5.5 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Electrical connection dealers

Grounding dispatcher 11 outputs with green support

NK-11/Green

€1.96 (€1.62 tax excl.)

Electrical connection distributor for distribution of ground conductors, 11 holes, brass bar with steel screws and green polyamide support. Fixing on panel or din-rail. Manufacturer reference: NK-11 zöld Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Electrical connection dealers

Neutral connection distributor 11 outputs with blue support

NK-11/BLUE

€1.96 (€1.62 tax excl.)

Electrical connection distributor for neutral conductor distribution, 11 holes, brass bar with steel screws and blue polyamide support. Fixing on panel or din-rail.Reference: NK-11 kék Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Electrical connection dealers

Connection dispatcher 2 poles isolated 7 outputs 100a

CSB-207

€5.78 (€4.78 tax excl.)

Electric connection dispatcher of 2 poles of 7 outputs, suitable for intensities up to 100a at 40ºC, brass distribution bars with steel screws fixed in polyamide support and protected with polycarbonate cover. Fixing on panel or din-rail. Reference: CSB 207Representative image for illustrative purposes, the article supplied will correspond to the...

Electrical connection dealers

Connection dispatcher 2 poles isolated 11 outputs 125a

CSB-211

€7.95 (€6.57 tax excl.)

Electric connection dispatcher of 2 poles of 11 outputs, suitable for intensities up to 125a at 40ºC, brass distribution bars with steel screws fixed in polyamide support and protected with polycarbonate cover. Fixing on panel or din-rail. Reference: CSB 211Representative image for illustrative purposes, the article supplied will correspond to the...

Electrical connection dealers

Connection dispatcher 2 poles isolated 15 outputs 125a

CSB-215

€9.35 (€7.73 tax excl.)

Electric connection dispatcher of 2 poles of 15 outputs, suitable for intensities up to 125a at 40ºC, brass distribution bars with steel screws fixed in polyamide support and protected with polycarbonate cover. Fixing on panel or din-rail. Reference: CSB 215Representative image for illustrative purposes, the article supplied will correspond to the...

Electrical connection dealers

Connection dispatcher 4 poles isolated 7 outputs 100a

CSB-407

€9.93 (€8.21 tax excl.)

Electric connection dispatcher of 4 poles of 7 outputs, suitable for intensities up to 100a, brass distribution bars with steel screws fixed in polyamide support and protected with polycarbonate cover. Fixing on panel or din-rail. Reference: CSB 407Representative image for illustrative purposes, the article supplied will correspond to the specifications...

View

Electrical connection dealers

Connection dispatcher 4 poles isolated 11 outputs 125a

CSB-411

€14.52 (€12.00 tax excl.)

11-outlet 4-pole electrical connection dispatcher, suitable for intensities up to 125a, brass distribution bars with steel screws fixed in polyamide support and protected with polycarbonate lid. Fixing on panel or din-rail. Reference: CSB 411Representative image for illustrative purposes, the article supplied will correspond to the specifications...

Electrical connection dealers

Connection dispatcher 4 poles isolated 15 outputs 125a

CSB-415

€17.47 (€14.44 tax excl.)

Electric connection dispatcher of 4 poles of 15 outputs, suitable for intensities up to 125a, brass distribution bars with steel screws fixed in polyamide support and protected with polycarbonate cover. Fixing on panel or din-rail. Reference: CSB 415Representative image for illustrative purposes, the article supplied will correspond to the specifications...

Connection Strips - Clemas

Strip 35mm

SK50/35-80A

€6.03 (€4.98 tax excl.)

Connection strip of 35mm² of 12 Poles in white, for use of intensities up to 80A, made of white polyamide. For electrical connections.Reference: SK50/35-80A

Direct mounting terminal 4-50mm2, 5mm plate | ADAJUSA

Direct mounting terminal 4-50mm2, 5mm plate | ADAJUSA 2

Electrical connection dealers

Direct mounting terminal 4-50mm2 plate thickness 5mm

SZK50F5

€2.34 (€1.93 tax excl.)

Direct mounting terminal on copper plate for 4-50mm 2 section cables. Mounting plate thickness 5mm.Reference: SZK50F5Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Direct mounting terminal 1.5-35mm2, 5mm plate | ADAJUSA

Direct mounting terminal 1.5-35mm2, 5mm plate | ADAJUSA 2

Electrical connection dealers

Direct mounting terminal 1.5-35mm2 plate thickness 5mm

SZK35F5

€1.68 (€1.39 tax excl.)

Direct mounting terminal on copper plate for cables with a section of 1.5-35mm 2 . Mounting plate thickness 5mm.Reference: SZK35F5Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Direct mounting terminal 1.5-16mm2, 5mm plate | ADAJUSA

Direct mounting terminal 1.5-16mm2, 5mm plate | ADAJUSA 2

Electrical connection dealers

Direct mounting terminal 1.5-16mm2 plate thickness 5mm

SZK16F5

€0.98 (€0.81 tax excl.)

Direct mounting terminal on copper plate for cables with a section of 1.5-16mm 2 . Mounting plate thickness 5mm.Reference: SZK16F5Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

VDE 1000V insulated long nose pliers | Adajusa

VDE 1000V insulated long nose pliers | Adajusa 2

Tools

Insulated long nose pliers VDE 1000V

€11.66 (€9.64 tax excl.)

VDE 1000V insulated long nose pliers. Size 160mm, blackened and polished tip, insulated rubber handle. Light weight and ergonomic handle, recommended for electrical gripping and precision cutting work.Reference: FC Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

VDE 1000V insulated curved tip pliers | Adajusa

VDE 1000V insulated curved tip pliers | Adajusa 2

Tools

Insulated curved nose pliers VDE 1000V

HFC

€12.12 (€10.02 tax excl.)

VDE 1000V insulated curved nose pliers. Size 160mm, blackened and polished tip, insulated rubber handle. Light weight and ergonomic handle, recommended for electrical gripping and precision cutting work.Reference: HFCs Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Universal pliers 160mm insulation VDE 1000V | Adajusa

Universal pliers 160mm insulation VDE 1000V | Adajusa 2

Tools

Universal pliers insulated VDE 1000V 160mm

KF-1

€12.71 (€10.50 tax excl.)

Universal use pliers with VDE 1000V insulation. Size 160mm, blackened and polished tip, insulated rubber handle. Light weight and ergonomic handle, recommended for precision electrical cutting work.Reference: KF-1 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Universal pliers 180mm insulation VDE 1000V | Adajusa

Universal pliers 180mm insulation VDE 1000V | Adajusa 2

Tools

Universal pliers insulated VDE 1000V 180mm

KF-2

€13.69 (€11.31 tax excl.)

Universal use pliers with VDE 1000V insulation. Size 180mm, blackened and polished tip, insulated rubber handle. Light weight and ergonomic handle, recommended for precision electrical cutting work.Reference: KF-2 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Combination pliers 200mm insulation VDE 1000V | Adajusa

Combination pliers 200mm insulation VDE 1000V | Adajusa 2

Tools

Universal pliers insulated VDE 1000V 200mm

KF-3

€14.62 (€12.08 tax excl.)

Universal use pliers with VDE 1000V insulation. 200mm length, blackened and polished tip, insulated rubber handle. Light weight and ergonomic handle, recommended for precision electrical cutting work.Reference: KF-3 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

VDE 1000V isolation Diagonal Cutting Pliers | Adajusa

VDE 1000V isolation Diagonal Cutting Pliers | Adajusa 2

Tools

Diagonal cutting pliers insulation VDE 1000V

€12.91 (€10.67 tax excl.)

VDE 1000V insulated diagonal cutting pliers. Size 160mm, blackened and polished head, insulated rubber handle. Light weight and ergonomic handle, recommended for electrical precision cutting work.Reference: OF Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

VDE 1000V insulation cutting pliers | Adajusa

VDE 1000V insulation cutting pliers | Adajusa 2

Tools

Insulation cutting pliers VDE 1000V

VV-1

€13.83 (€11.43 tax excl.)

VDE 1000V insulated cutting pliers. Size 160mm, blackened and polished head, insulated rubber handle. Light weight and ergonomic handle, recommended for electrical precision cutting work.Reference: VV-1 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Diagonal cutting pliers reinforced insulation VDE 1000V | Adajusa

Tools

Diagonal cutting pliers reinforced insulation VDE 1000V

VV-2

€13.83 (€11.43 tax excl.)

VDE 1000V insulated diagonal cutting pliers. Size 160mm, blackened and polished head, insulated rubber handle. Light weight and ergonomic handle, recommended for electrical precision cutting work. High resistance.Reference: VV-2 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Heat shrink tubing

Heat shrink tubing 4mm strip of 1m

ZS-4

€0.41 (€0.34 tax excl.)

Thin wall polyolefin heat shrink tubing, 1 meter strips. Various colors available.Diameter before shrinkage: 4mmDiameter after shrinkage: 2mmReference: ZS-4 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Heat shrink tubing

Heat shrink tube 5mm strip of 1m

ZS-5

€0.41 (€0.34 tax excl.)

Thin wall polyolefin heat shrink tubing, 1 meter strips. Various colors available.Diameter before shrinkage: 5mmDiameter after shrinkage: 2.5mmReference: ZS-5 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Heat shrink tubing

Heat shrink tubing 20mm strip of 1m

ZS-20

€1.79 (€1.48 tax excl.)

Thin wall polyolefin heat shrink tubing, 1 meter strips. Various colors available.Diameter before shrinkage: 20mmDiameter after shrinkage: 10mmReference: ZS-20 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Heat shrink tubing

Heat shrink tube 12mm strip of 1m

ZS-12

€0.62 (€0.51 tax excl.)

Thin wall polyolefin heat shrink tubing, 1 meter strips. Various colors available.Diameter before shrinkage: 12mmDiameter after shrinkage: 6mmReference: ZS-12 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Heat shrink tubing

Heat shrink tubing 25mm strip of 1m

ZS-25

€2.15 (€1.78 tax excl.)

Thin wall polyolefin heat shrink tubing, 1 meter strips. Various colors available.Diameter before shrinkage: 25mmDiameter after shrinkage: 12.5mmReference: ZS-25 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Black insulating tape 19mmx0.13mm reel of 10m | ADAJUSA

Friction tape

Black insulating tape 19mmx0.13mm reel 10m

1910-B

€0.48 (€0.40 tax excl.)

Self-adhesive PVC insulating tape in black, high quality, self-extinguishing and rubber adhesive. The width of the tape is 19mm with a thickness of 0.13mm. Supplied on 10m long reels. Reference: 1910-B Colour: Black Width: 19mm thickness: 0.13mm Length on the reel: 10m

Friction tape

White insulating tape 19mmx0.13mm reel of 10m

1910-W

€0.48 (€0.40 tax excl.)

Self-adhesive PVC insulating tape in white, high quality, self-extinguishing and rubber adhesive. The width of the tape is 19mm with a thickness of 0.13mm. Supplied on 10m long reels. Reference: 1910-W White color Width: 19mm thickness: 0.13mm Length on the reel: 10m

50mmx0.13mm black insulating tape 20m reel

Friction tape

Black insulating tape 50mmx0.13mm reel 20m

5020-B

€2.66 (€2.20 tax excl.)

Self-adhesive PVC insulating tape in black, high quality, self-extinguishing and rubber adhesive. The width of the tape is 50mm with a thickness of 0.13mm. Supplied on 20m long reels. Reference: 5020-B Colour: Black Width: 50mm thickness: 0.13mm Length on the reel: 20m

View

50mmx0.13mm white insulating tape 20m reel

Friction tape

White insulating tape 50mmx0.13mm reel 20m

5020-W

€2.66 (€2.20 tax excl.)

Self-adhesive PVC insulating tape in white, high quality, self-extinguishing and rubber adhesive. The width of the tape is 50mm with a thickness of 0.13mm. Supplied on 20m long reels. Reference: 5020-W White color Width: 50mm thickness: 0.13mm Length on the reel: 20m

Measuring instruments

Ammeter 0-40A DIN rail

AMA-40

€11.02 (€9.11 tax excl.)

Ammeter 0-40 A in alternating current, for transpanel mounting, 45mm wide. It allows to visualize in a very fast and visual way the value of a current. Reference: AMA-40Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Measuring instruments

Ammeter 0-30A DIN rail

AMA-30

€11.48 (€9.49 tax excl.)

Analog ammeter for measurements from 0 to 30A in alternating current. DIN rail mounting, 2.5 modules wide. It allows to visualize in a very fast and simple way the value of a current. Part number: AMA-30 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

View

Metal cabinets and envelopes

Mechanical hygrostat

HYG-74

€30.19 (€24.95 tax excl.)

Mechanical hygrostat, suitable for humidity regulation inside electrical cabinets and the like. Installation by clip on din-rail, switching by switched contact. Reference: HYG-74

Measuring instruments

Voltmeter 0-250Vac DIN rail

AMV/250

€11.02 (€9.11 tax excl.)

Analog voltmeter for AC voltage measurements from 0 to 250V. DIN rail mounting, 2.5 modules wide. It allows to display in a very fast and simple way the value of a voltage. Part number: AMV/250 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

View

Differential Class B 40A, 30mA OMU | ADAJUSA

Four-pole differential (4 poles)

Differential 4 poles 40A 30mA Class B

OMR104B40003

€183.32 (€151.50 tax excl.)

Three- phase differential 4 poles (3P+N) 40A 30mA (0.03A) class B. It allows the detection of 50Hz sinusoidal and pulsating signals with mixed components and pure direct current component signals, ensuring at all times the protection of people against insulation/derivation problems in installations or electrical elements. Breaking power 10kA. Class "B"...

Heat shrink tubing

Heat shrink tube 6mm strip of 1m

ZS-6

€0.51 (€0.42 tax excl.)

Thin wall polyolefin heat shrink tubing, 1 meter strip. Various colors available.Diameter before shrinkage: 6mmDiameter after shrinkage: 3mmReference: ZS-6 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Heat shrink tubing

Heat shrink tube 9mm strip of 1m

ZS-9

€0.46 (€0.38 tax excl.)

Thin wall polyolefin heat shrink tubing, 1 meter strip. Various colors available.Diameter before shrinkage: 9mmDiameter after shrinkage: 4.5mmReference: ZS-9 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Flexible unipolar cable 0.5mm2 white Adajusa

Cables for electrical installations

Unipolar flexible cable roll 0.5 mm white 100m

MKH 05Blanco

€22.22 (€18.36 tax excl.)

Roll of 100m of flexible cable of 0.5mm² of section, white color, specially designed for internal wiring of electrical cabinets, switch boxes and electrical appliances. Reference: MKH 1x0,5 White Color: White Section: 0,5mm²

Flexible unipolar cable 0.5mm2 brown Adajusa

Cables for electrical installations

Unipolar flexible cable roll 0.5mm brown 100m

MKH 05Marron

€22.22 (€18.36 tax excl.)

Roll of 100m of flexible cable of 0.5mm² section, brown color, specially designed for internal wiring of electrical cabinets, switch boxes and electrical appliances. Reference: MKH 1x0,5 Brown Color: Brown Section: 0,5mm²

Flexible unipolar cable 0.5mm2 green color Adajusa

Cables for electrical installations

Unipolar flexible cable roll 0.5mm green 100m

MKH 05Verde

€22.22 (€18.36 tax excl.)

Roll of 100m of flexible cable of 0.5mm² section, green color, specially designed for internal wiring of electrical cabinets, switch boxes and electrical appliances. Reference: MKH 1x0,5 Green Color: Green Section: 0,5mm²

Flexible unipolar cable 0.5mm2 yellow color Adajusa

Cables for electrical installations

Unipolar flexible cable roll 0.5 mm yellow 100m

MKH 05Amarill

€22.22 (€18.36 tax excl.)

Roll of 100m of flexible cable of 0.5mm² section, yellow color, specially designed for internal wiring of electrical cabinets, switch boxes and electrical appliances. Reference: MKH 1x0,5 Yellow Color: Yellow Section: 0,5mm²

Flexible unipolar cable 0.5mm2 orange Adajusa

Cables for electrical installations

Unipolar flexible cable roll 0.5 mm orange 100m

MKH 05Naranja

€22.22 (€18.36 tax excl.)

Roll of 100m of flexible cable of 0.5mm² of section, orange color, specially designed for internal wiring of electrical cabinets, switch boxes and electrical appliances. Reference: MKH 1x0,5 Orange Color: Orange Section: 0,5mm²

Flexible unipolar cable 0.5mm2 blue Adajusa

Cables for electrical installations

Unipolar flexible cable roll 0.5 mm blue color 100m

MKH 05Azul

€22.22 (€18.36 tax excl.)

Roll of 100m of flexible cable of 0.5mm² of section, blue color, specially designed for internal wiring of electrical cabinets, switch boxes and electrical appliances. Reference: MKH 1x0,5 Blue Color: Blue Section: 0,5mm²

Flexible unipolar cable 0.5mm2 red color Adajusa

Cables for electrical installations

Unipolar flexible cable roll 0.5mm red 100m

MKH 05Rojo

€22.22 (€18.36 tax excl.)

Roll of 100m of flexible cable of 0.5mm² of section, red color, specially designed for internal wiring of electrical cabinets, switch boxes and electrical appliances. Reference: MKH 1x0,5 Red Color: Red Section: 0,5mm²

fuse holder 14x51 2 pole for fuse cartridges 14x51 |ADAJUSA

Fuses and fuse holders

Fuse holder base 2-pole 14x51mm 63A DIN rail mounting

14x51 2p

€7.07 (€5.84 tax excl.)

Fuse holder 2 poles 14x51 of electrical connection up to 63A and 690V of modular type, for cylindrical fuse cartridges of 14X51mm, protection of both circuits and electrical machinery.Part number: 14x51 2p Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated

fuse holder 14x51 of 3 poles for fuse cartridges 14x51 |ADAJUSA

Fuses and fuse holders

Fuse holder base 3-pole 14x51mm 63A DIN rail mounting

14x51 3p

€14.13 (€11.68 tax excl.)

Fuse holder 3 poles 14x51 of electrical connection up to 63A and 690V of modular type, for cylindrical fuse cartridges of 14X51mm, protection of both circuits and electrical machinery. Reference: 14x51 3p Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated

Aluminum terminals

Aluminum tubular terminal 16 mm2

APS-16

€0.30 (€0.25 tax excl.)

Aluminum tubular terminal for 16 mm2 cable section and 8.5 mm hole diameter. Easy insertion of the cable by tightening securely around the cable. Part no.: APS-16 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Copper terminals

Copper tubular terminal 16 mm2

RPS-16

€1.28 (€1.06 tax excl.)

Copper tubular terminal for 16 mm2 cable section and 8.5 mm hole diameter. Its design ensures easy insertion of the cable and fits securely around the cable. Part No.: RPS-16 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Copper-aluminum bimetallic terminal 16 mm2 | Adajusa

Bimetallic terminals

Copper-aluminum bimetallic tubular terminal 16 mm2

MDTL-16

€1.08 (€0.89 tax excl.)

Bimetallic tubular terminal for cable with 16 mm2 cross section and 8.3 mm hole diameter. Terminal with electrolytic copper spade and aluminum alloy tube. Its design guarantees easy insertion of the cable and fits securely around the cable. Part number: MDTL-16 Representative image for illustrative purposes, the item supplied will correspond to the...

Aluminum terminals

Aluminum tubular terminal 25 mm2

APS-25

€0.30 (€0.25 tax excl.)

Aluminum tubular terminal for 25 mm2 cable cross-section and 8.5 mm hole diameter. Easy insertion of the cable by tightening securely around the cable. Part number: APS-25 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Aluminum terminals

Aluminum tubular terminal 35 mm2

APS-35

€0.65 (€0.54 tax excl.)

Aluminum tubular terminal for 35 mm2 cable section and 10.5 mm hole diameter. Tin-plated surface finish for better electrical contact. Easy insertion of the cable by tightening securely around the cable. Part number: APS-35 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Aluminum terminals

Aluminum tubular terminal 50 mm2

APS-50

€0.48 (€0.40 tax excl.)

Aluminum tubular terminal for 50 mm2 cable section and 10.5 mm hole diameter. Tin-plated surface finish for better electrical contact. Easy insertion of the cable by tightening securely around the cable. Part number: APS-50 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Aluminum terminals

Aluminum tubular terminal 70 mm2

APS-70

€1.20 (€0.99 tax excl.)

Aluminum tubular terminal for 70 mm2 cable section and 12.5 mm hole diameter. Tin-plated surface finish for better electrical contact. Easy insertion of the cable by tightening securely around the cable. Part number: APS-70 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Aluminum terminals

Aluminum tubular terminal 95 mm2

APS-95

€1.46 (€1.21 tax excl.)

Aluminum tubular terminal for 95 mm2 cable section and 12.5 mm hole diameter. Tin-plated surface finish for better electrical contact. Easy insertion of the cable by tightening securely around the cable. Part number: APS-95 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Aluminum terminals

Aluminum tubular terminal 120 mm2

APS-120

€1.22 (€1.01 tax excl.)

Aluminum tubular terminal for 120 mm2 cable section and 14.5 mm hole diameter. Tin-plated surface finish for better electrical contact. Easy insertion of the cable by tightening securely around the cable. Part number: APS-120 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Aluminum terminals

Aluminum tubular terminal 150 mm2

APS-150

€1.40 (€1.16 tax excl.)

Aluminum tubular terminal for 150 mm2 cable section and 14.5 mm hole diameter. Tin-plated surface finish for better electrical contact. Easy insertion of the cable by tightening securely around the cable. Part number: APS-150 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Aluminum terminals

Aluminum tubular terminal 185 mm2

APS-185

€1.88 (€1.55 tax excl.)

Aluminum tubular terminal for 185 mm2 cable section and 17 mm hole diameter. Tin-plated surface finish for better electrical contact. Easy insertion of the cable by tightening securely around the cable. Part number: APS-185 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Aluminum terminals

Aluminum tubular terminal 240 mm2

APS-240

€3.88 (€3.21 tax excl.)

Aluminum tubular terminal for cable section 240 mm2 and bore diameter 17 mm. Tin-plated surface finish for better electrical contact. Easy insertion of the cable by tightening securely around the cable. Part number: APS-240 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Copper terminals

Copper tubular terminal 25 mm2

RPS-25

€1.50 (€1.24 tax excl.)

Copper tubular terminal for 25 mm2 cable section and 8.5 mm hole diameter. Its design ensures easy insertion of the cable and fits securely around the cable. Part number: RPS-25 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Copper terminals

Copper tubular terminal 35 mm2

RPS-35

€1.96 (€1.62 tax excl.)

Copper tubular terminal for 35 mm2 cable section and 10.5 mm hole diameter. Its design ensures easy insertion of the cable and fits securely around the cable. Part number: RPS-35 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Copper terminals

Copper tubular terminal 50 mm2

RPS-50

€2.60 (€2.15 tax excl.)

Copper tubular terminal for 50 mm2 cable section and 10.5 mm hole diameter. Its design ensures easy insertion of the cable and fits securely around the cable. Part number: RPS-50 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Copper terminals

Copper tubular terminal 70 mm2

RPS-70

€2.99 (€2.47 tax excl.)

Copper tubular terminal for 70 mm2 cable section and 12.5 mm hole diameter. Its design ensures easy insertion of the cable and fits securely around the cable. Part number: RPS-70 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Copper terminals

Copper tubular terminal 95 mm2

RPS-95

€4.89 (€4.04 tax excl.)

Copper tubular terminal for 95 mm2 cable section and 12.5 mm hole diameter. Its design ensures easy insertion of the cable and fits securely around the cable. Part number: RPS-95 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Copper terminals

Copper tubular terminal 120 mm2

RPS-120

€4.77 (€3.94 tax excl.)

Copper tubular terminal for 120 mm2 cable section and 14.5 mm bore diameter. Its design ensures easy insertion of the cable and fits securely around the cable. Part number: RPS-120 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Copper terminals

Copper tubular terminal 150 mm2

RPS-150

€7.57 (€6.26 tax excl.)

Copper tubular terminal for 150 mm2 cable section and 14.5mm bore diameter. Its design ensures easy insertion of the cable and fits securely around the cable. Part number: RPS-150 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Copper terminals

Copper tubular terminal 185 mm2

RPS-185

€8.11 (€6.70 tax excl.)

Copper tubular terminal for 185 mm2 cable section and 17mm hole diameter. Its design ensures easy insertion of the cable and fits securely around the cable. Part number: RPS-185 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Copper terminals

Copper tubular terminal 240 mm2

RPS-240

€10.58 (€8.74 tax excl.)

Copper tubular terminal for 240 mm2 cable section and 17mm hole diameter. Its design ensures easy insertion of the cable and fits securely around the cable. Part number: RPS-240 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Bimetallic terminals

Copper-aluminum bimetallic tubular terminal 25 mm2

MDTL-25

€1.02 (€0.84 tax excl.)

Bimetallic tubular terminal for 25 mm2 cable section and 8.5mm hole diameter. Terminal with electrolytic copper spade and aluminum alloy tube. Its design guarantees the easy insertion of the cable fitting securely around the cable. Part number: MDTL-25 Representative image for illustrative purposes, the item supplied will correspond to the...

Bimetallic terminals

Bimetallic copper-aluminum tubular terminal 35 mm2

MDTL-35

€1.10 (€0.91 tax excl.)

Bimetallic tubular terminal for 35 mm2 cable section and 8.5mm bore diameter. Terminal with electrolytic copper spade and aluminum alloy tube. Its design guarantees the easy insertion of the cable, fitting securely around the cable. Part number: MDTL-35 Representative image for illustrative purposes, the item supplied will correspond to the...

Bimetallic terminals

Bimetallic copper-aluminum tubular terminal 50 mm2

MDTL-50

€1.88 (€1.55 tax excl.)

Bimetallic tubular terminal for 50 mm2 cable section and 10.5mm bore diameter. Terminal with electrolytic copper spade and aluminum alloy tube. Its design guarantees the easy insertion of the cable, fitting securely around the cable. Part number: MDTL-50 Representative image for illustrative purposes, the item supplied will correspond to the...

Bimetallic terminals

Copper-aluminum bimetallic tubular terminal 70 mm2

MDTL-70

€2.54 (€2.10 tax excl.)

Bimetallic tubular terminal for 70 mm2 cable section and 12.5mm bore diameter. Terminal with electrolytic copper spade and aluminum alloy tube. Its design guarantees the easy insertion of the cable, fitting securely around the cable. Part number: MDTL-70 Representative image for illustrative purposes, the item supplied will correspond to the...

Bimetallic terminals

Copper-aluminum bimetallic tubular terminal 95 mm2

MDTL-95

€3.34 (€2.76 tax excl.)

Bimetallic tubular terminal for 95 mm2 cable section and 12.5mm bore diameter. Terminal with electrolytic copper spade and aluminum alloy tube. Its design guarantees the easy insertion of the cable fitting securely around the cable. Part number: MDTL-95 Representative image for illustrative purposes, the item supplied will correspond to the...

View

Bimetallic terminals

Copper-aluminum bimetallic tubular terminal 120 mm2

MDTL-120

€3.61 (€2.98 tax excl.)

Bimetallic tubular terminal for 120 mm2 cable section and 14.5mm bore diameter. Terminal with electrolytic copper spade and aluminum alloy tube. Its design guarantees the easy insertion of the cable, fitting securely around the cable. Part number: MDTL-120 Representative image for illustrative purposes, the item supplied will correspond to the...

Bimetallic terminals

Copper-aluminum bimetallic tubular terminal 150 mm2

MDTL-150

€5.19 (€4.29 tax excl.)

Bimetallic tubular terminal for 150 mm2 cable section and 14.5mm bore diameter. Terminal with electrolytic copper spade and aluminum alloy tube. Its design guarantees the easy insertion of the cable, fitting securely around the cable. Part number: MDTL-150 Representative image for illustrative purposes, the item supplied will correspond to the...

Bimetallic terminals

Copper-aluminum bimetallic tubular terminal 185 mm2

MDTL-185

€5.87 (€4.85 tax excl.)

Bimetallic tubular terminal for cable with 185 mm2 section and 17mm bore diameter. Terminal with electrolytic copper spade and aluminum alloy tube. Its design guarantees the easy insertion of the cable, fitting securely around the cable. Part number: MDTL-185 Representative image for illustrative purposes, the item supplied will correspond to the...

Bimetallic terminals

Copper-aluminum bimetallic tubular terminal 240 mm2

MDTL-240

€8.25 (€6.82 tax excl.)

Bimetallic tubular terminal for cable with 240 mm2 section and 17mm hole diameter. Terminal with electrolytic copper spade and aluminum alloy tube. Its design guarantees easy insertion of the cable and fits securely around the cable. Part number: MDTL-240 Representative image for illustrative purposes, the item supplied will correspond to the...

Tools

Hydraulic crimper for terminals copper from 16 to 300 mm2

HPR-1

€142.99 (€118.17 tax excl.)

Hydraulic tool for manual crimping of copper and aluminum terminals, hexagonal crimping that guarantees the correct fixing of the terminal to the cable. Allows crimping of copper terminals from 16 to 300 mm2 and aluminum terminals from 10 to 240 mm2. Facilitates manual crimping by providing a force of 10kN. Ergonomic non-slip PVC handle and 360° rotating...

Cables for electrical installations

Unipolar flexible cable roll 0.5 mm yellow 200m

MKH 05Ama200

€44.43 (€36.72 tax excl.)

Roll of 200m of flexible cable of 0.5mm² section, yellow color, specially designed for internal wiring of electrical cabinets, switch boxes and electrical appliances. Reference: MKH 1x0,5 200m Yellow Color: Yellow Section: 0,5mm²

Cables for electrical installations

Unipolar flexible cable roll 0.5mm brown 200m

MKH 05Marr200

€44.43 (€36.72 tax excl.)

Roll of 200m of flexible cable of 0.5mm² section, brown color, specially designed for internal wiring of electrical cabinets, switch boxes and electrical appliances. Reference: MKH 1x0,5 200m Brown Color: Brown Section: 0,5mm²

Pushbutton boxes

3-element Button box diameter 22 plastic - XAL series

XAL-BE03

€5.84 (€4.83 tax excl.)

Button box for 3 elements, diameter 22 mm, made of grey plastic. Reference: XAL-BE03 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Cables for electrical installations

Roll of unipolar flexible cable 0.5 mm red color 200m

MKH 05Rojo200

€44.43 (€36.72 tax excl.)

Roll of 200m of flexible cable with a section of 0.5mm² , red, specially designed for internal wiring of electrical cabinets, switch boxes and electrical appliances. Reference: MKH 1x0.5 200m Red Red color Section: 0.5mm²

View

Cables for electrical installations

Roll of unipolar flexible cable 0.5 mm blue color 200m

MKH 05Azul200

€44.43 (€36.72 tax excl.)

Roll of 200m of flexible cable with a section of 0.5mm² , blue, specially designed for internal wiring of electrical cabinets, switch boxes and electrical appliances. Reference: MKH 1x0.5 200m Blue Color blue Section: 0.5mm²

Four-pole differential (4 poles)

Differential 4 poles 63A 30mA Class B

OMR104B63003

€153.98 (€127.26 tax excl.)

Three-phase differential 4 poles (3P+N) 63A 30mA (0.03A) class B. It allows the detection of 50Hz sine and pulsating signals with mixed components and pure direct current component signals, ensuring at all times the protection of people from isolation/derivation problems in electrical installations or elements. Breaking capacity 10kA. Class “B” is...

Showing 1-598 of 598 item(s)