Pneumatic pedal 1/4 5/2 monostable with locking and protection Metal Work - ADAJUSA
Pneumatic pedal 1/4 5/2 monostable with locking and protection Metal Work - ADAJUSA
Pneumatic pedal 1/4 5/2 monostable with locking and protection Metal Work - ADAJUSA
Pneumatic pedal 1/4 5/2 monostable with locking and protection Metal Work - ADAJUSA
Pneumatic pedal 1/4 5/2 monostable with locking and protection Metal Work - ADAJUSA
Pneumatic pedal 1/4 5/2 monostable with locking and protection Metal Work - ADAJUSA
Pneumatic pedal 1/4 5/2 monostable with locking and protection Metal Work - ADAJUSA
Pneumatic pedal 1/4 5/2 monostable with locking and protection Metal Work - ADAJUSA

Single-stable 1/4 5/2 pneumatic pedal with locking and protection - Metal Work

€85.63 Tax included

€70.77 tax excl.

Pneumatic pedal with 1/4" 5-way thread with mechanical lock and with protective cover in high-strength plastic material, monostable operation, the pneumatic valve is operated while the pedal remains pressed returning to the resting position when it stops operating.

Reference: W3120000021

Logotipo Metal Work


Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

No queries yet, leave the first!
Privacy
Shipments
Returns
 

Pneumatic pedal with G 1/4" 5-way monostable thread. The pedal is equipped with mechanical lock with protective cover to avoid accidental actuation, the pedal body is made of high-strength plastic material, in orange and the pneumatic valve in aluminum, monostable operation, the pneumatic valve is operated while the pedal remains pressed returning to the resting position when it stops operating. The foot must first push a locking lever, and then it can lower the pedal.

Specifications:

  • Manufacturer: Metal Work.
  • Reference: W3120000021 (PEV 35 PEC PR)
  • Valve thread: 1/4".
  • Fluid: With or without lubrication, if there is lubrication it must be continuous.
  • Typology: 5 ways, 2 monostable positions with protection.
  • Working pressure: 2,5..10 bar. 0,25..1 MPa. 36..145 psi.
  • Nominal diameter: 7.5mm.
  • Conductance C: 264.26 Nl/min-bar.
  • Critical ratio: 0.32 bar/bar.
  • Flow rate at 6.3 bar ΔP 0.5bar: 660 Nl/min.
  • Flow rate at 6.3 bar ΔP 1 bar: 840 Nl/min.


Material for professional use, install in compliance with the regulations in force at the place of installation.

To expand the information you can download the technical sheet by clicking on the "Attachments" tab

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

Responsible: ADAJUSA (CONSTRUCCIONES PBR, S.L.), purpose: Respond to requests for information, legitimacy: consent of the interested party, recipients: data will not be communicated to third parties, rights: Access, rectify and delete data, as well as other rights, as explained in the additional information. (read)

You might also like

Monostable pneumatic pedal with protection - Metal Work Monostable pneumatic pedal with protection - Metal Work 2
Pushbuttons and pneumatic actuators

Pneumatic pedal 1/4 5/2 monostable with protection - Metal work

Metal Work
W3120000001
€76.10 (€62.89 tax excl.)
Pneumatic pedal with 1/4" 5- way thread with protection cover in high-resistance plastic material, monostable operation, the pneumatic valve is activated while the pedal remains pressed, returning to the rest position when it is stopped. Reference: W3120000001 Representative image for illustrative purposes, the item supplied will correspond to the...
Bistable pneumatic pedal with protection - Metal Work Bistable pneumatic pedal with protection - Metal Work 2
Pushbuttons and pneumatic actuators

Pneumatic pedal 1/4 5/2 bistable with protection - Metal Work

Metal Work
W3120000011
€76.10 (€62.89 tax excl.)
5-way 1/4" threaded pneumatic pedal with protective cover in high-strength plastic material, of bistable operation, the pneumatic valve is activated when the pedal is activated and remains activated until it is activated again. Reference:W3120000011 Representative image for illustrative purposes, the item supplied will correspond to the specifications...

16 other products in the same category:

Monostable pneumatic pedal with protection - Metal Work Monostable pneumatic pedal with protection - Metal Work 2
Pushbuttons and pneumatic actuators

Pneumatic pedal 1/4 5/2 monostable with protection - Metal work

Metal Work
W3120000001
€76.10 (€62.89 tax excl.)
Pneumatic pedal with 1/4" 5- way thread with protection cover in high-resistance plastic material, monostable operation, the pneumatic valve is activated while the pedal remains pressed, returning to the rest position when it is stopped. Reference: W3120000001 Representative image for illustrative purposes, the item supplied will correspond to the...
Emergency stop button with... Emergency stop button with... 2
  • Pack
Pushbuttons and pneumatic actuators

Emergency stop button with locking and valve: 3/2 NO side fittings Ø 4 mm- Aignep

Aignep
PK-EMER32NOLX
€43.73 (€36.14 tax excl.)
40 mm diameter pneumatic emergency stop push button with adapter for valve and normally open (NO) end-of-stroke valve, fittings on the side for 4 mm outer diameter tube with built-in adapter for the interface (push button-valve). Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.
Pneumatic pedal with protection - ADAJUSA Pneumatic pedal with protection - ADAJUSA 2
Pushbuttons and pneumatic actuators

Pneumatic pedal with 1/4 5/2 monostable protection

Generico-AIR
OP52M4
€63.38 (€52.38 tax excl.)
Pneumatic pedal with protection. Metal valve of 1/4 and 5 ways monostable, when acting, the valve changes position and when it stops acting, it returns to the resting position, protection housing in blue polycarbonate.Reference: OP52M4 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.
Home
Product added to wishlist
Product added to compare.