Rotary Actuator .63
Rotary Actuator .63
Rotary Actuator .63
Rotary Actuator .63
Rotary Actuator .63
Rotary Actuator .63

Rotary actuator diameter 63 - Metal Work

€145.90 Tax included

€120.58 tax excl.

Double-acting Ø63 pneumatic rotary actuator, for actuating ball, butterfly, or any other type of valve, with a 90º turning angle.

The actuator can be easily coupled to valves complying with ISO 5211 - DIN3337 regulations. NAMUR standard valves and solenoid valves can be fixed to the actuator for its operation.

Reference: W79AD063GQ014DA

Pneumatic symbol actuator with double-acting valve ATEX pictogram

Metal work logo

Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

No queries yet, leave the first!
Privacy
Shipments
Returns
 

Double-acting Ø63 pneumatic rotary actuator, for actuating ball, butterfly, or any other type of valve with a 90º turning angle.

The actuator can be easily coupled to valves complying with ISO 5211 - DIN3337 regulations, and can receive F03, F05 and F07 distance valves. NAMUR standard valves and solenoid valves can be fixed to the actuator for its operation.

Technical characteristics

  • Manufacturer/Supplier: Metal Work
  • Reference: W79AD063GQ014DA
  • Working pressure:
    • bar : 3 to 8
    • MPa: 0.3 to 0.8
    • psi: 43 to 116
  • Operating temperature: -20ºC to +80ºC
  • Fluid: 20 µm dry filtered air
  • Rotation angle: 90º ±5º
  • Mechanical connection: Square type
  • Machining for valve or solenoid valve on NAMUR VDI\VDE-3845 type body
  • ATEX Category:
    • ATEX pictogram II 2G Ex h IIC T5 Gb
    • ATEX pictogram II 2D Ex h IIIC T95ºC Db
  • Mounting position: Any, vertical is not recommended
  • actuator Type: Double Acting
  • Nominal torque at 6 bar 7.6 Nm
  • Rotation time: 0.5 s.

Dimensions:

ACTUATOR63

Professional use material, install in compliance with the regulations in force at the installation site.

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

Responsible: ADAJUSA (CONSTRUCCIONES PBR, S.L.), purpose: Respond to requests for information, legitimacy: consent of the interested party, recipients: data will not be communicated to third parties, rights: Access, rectify and delete data, as well as other rights, as explained in the additional information. (read)

You might also like

16 other products in the same category:

Angled seat valve 2 NC...
Valves with pneumatic actuators

Angled seat valve 2 NC actuator in INOX diameter 63 - Aignep

Aignep
X1YXH10630
€333.31 (€275.46 tax excl.)
Normally closed (NC) simple acting inclined seat valve with 2" thread. PTFE gaskets which allow it to work in a wide range of temperatures in the fluid (-10ºC to +180ºC). The actuator body is manufactured in AISI 304 stainless steel and is pneumatically actuated. The valve can be installed in any mounting position, the body manufactured in the shape of a...
1/4 3/2-way "L" valve with pneumatic rotary actuator 1/4 3/2-way "L" valve with pneumatic rotary actuator 2
Valves with pneumatic actuators

Valve 1 1/2 3/2 L-way with pneumatic rotary actuator - Metal Work

Metal Work
VB3L2LB040063
€532.28 (€439.90 tax excl.)
Valve of 1"1/2 of sphere, 3 ways 2 positions, 3/2, with configuration in "L", with pneumatic rotary actuator of double effect. For control of air, gases or non-corrosive and non-flammable fluids. Valve body in nickel-plated brass. The valve has a manual activation control. Valves with ATEX certification. Reference: VB3L2LB040063D / W0900300127...
1/4 2/2-way valve with pneumatic rotary actuator 1/4 2/2-way valve with pneumatic rotary actuator 2
Valves with pneumatic actuators

3/8 2/2-way valve with pneumatic rotary actuator - Metal Work

Metal Work
VB22LC010032D
€133.00 (€109.92 tax excl.)
Valve of 3/8" of sphere, 2 ways 2 positions, 2/2, with double effect pneumatic rotary actuator. For control of air, water, gases or non-corrosive and non-flammable fluids. Valve body in nickel-plated brass. The valve has a manual activation control. Valves with ATEX certification. Reference: VB22LC010032D / W0900300102 Representative image for...
1/4 3/2-way "L" valve with pneumatic rotary actuator 1/4 3/2-way "L" valve with pneumatic rotary actuator 2
Valves with pneumatic actuators

L-valve 1 3/2-way with pneumatic rotary actuator - Metal Work

Metal Work
VB3L2LB025050
€300.41 (€248.27 tax excl.)
1" dial valve, 3 ways 2 positions, 3/2, with "L" configuration, with double effect pneumatic rotary actuator. For control of air, gases or non-corrosive and non-flammable fluids. Valve body in nickel-plated brass. The valve has a manual activation control. Valves with ATEX certification. Reference: VB3L2LB025050D / W0900300125 Representative...
1/4 3/2-way "L" valve with pneumatic rotary actuator 1/4 3/2-way "L" valve with pneumatic rotary actuator 2
Valves with pneumatic actuators

Valve way 3/8 3/2 L- with pneumatic rotary actuator - Metal Work

Metal Work
VB3L2LB010032
€177.22 (€146.46 tax excl.)
Valve of 3/8" of sphere, 3 ways 2 positions, 3/2, with configuration in "L", with double effect pneumatic rotary actuator. For control of air, gases or non-corrosive and non-flammable fluids. Valve body in nickel-plated brass. The valve has a manual activation control. Valves with ATEX certification. Reference: VB3L2LB010032D / W0900300122...
Angled seat valve 1/2 NC...
Valves with pneumatic actuators

Angled seat valve 1/2 NC actuator in technopolymer diameter 50 - Aignep

Aignep
X2Y0510500
€90.59 (€74.87 tax excl.)
Normally closed (NC) simple acting inclined seat valve with 1/2 thread. PTFE gaskets which allow it to work in a wide range of temperatures in the fluid (-10ºC to +180ºC). The actuator body is made of technopolymer and is pneumatically actuated. The valve can be installed in any mounting position, the "Y" shaped body increases flow by 30% and increases...
1/4 2/2-way valve with pneumatic rotary actuator 1/4 2/2-way valve with pneumatic rotary actuator 2
Valves with pneumatic actuators

Valve 1 1/4 2/2 ways stainless steel with pneumatic rotary actuator - Metal Work

Metal Work
VB22IA032063D
€247.48 (€204.53 tax excl.)
Stainless steel valve with 1 1/4" dial, 2-way 2-position, 2/2, with double-acting pneumatic rotary actuator. For control of air, water, gases or non-corrosive and non-flammable fluids. Valve body in stainless steel. The valve has a manual activation control. Valves with ATEX certification. Reference: VB22IA032063D Representative image for...
1/4 2/2-way valve with pneumatic rotary actuator 1/4 2/2-way valve with pneumatic rotary actuator 2
Valves with pneumatic actuators

Valve 1/4 2/2 way stainless steel with actuator pneumatic rotary - Metal Work

Metal Work
VB22IA008032D
€146.99 (€121.48 tax excl.)
Stainless steel 1/4" ball valve, 2 way 2 positions, 2/2, with double acting pneumatic rotary actuator. For control of air, water, gases or non-corrosive and non-flammable fluids. Stainless steel valve body. The valve has a manual activation control. Valves with ATEX certification. Part number: Z33VB22IA008032D Representative image for...
1/4 2/2-way valve with pneumatic rotary actuator 1/4 2/2-way valve with pneumatic rotary actuator 2
Valves with pneumatic actuators

Valve 1 1/2 2/2 ways with pneumatic rotary actuator - Metal Work

Metal Work
VB22LC040063D
€237.81 (€196.54 tax excl.)
Valve of 1" 1/2 of sphere, 2 ways 2 positions, 2/2, with double effect pneumatic rotary actuator. For control of air, water, gases or non-corrosive and non-flammable fluids. Valve body in nickel-plated brass. The valve has a manual activation control. Valves with ATEX certification. Reference: VB22LC040063D / W0900300107 Representative image for...
1/4 3/2-way "L" valve with pneumatic rotary actuator 1/4 3/2-way "L" valve with pneumatic rotary actuator 2
Valves with pneumatic actuators

Valve 1/4 3/2 T-way with pneumatic rotary actuator - Metal Work

Metal Work
VB3T2LB008032
€177.22 (€146.46 tax excl.)
Valve1/4" dial , 3-way 2-position, 3/2, with "T" configuration, with double-acting pneumatic rotary actuator. For control of air, gases or non-corrosive and non-flammable fluids. Valve body in nickel-plated brass. The valve has a manual activation control. Valves with ATEX certification. Reference: VB3T2LB008032D / W0900300131 Representative...
1/4 3/2-way "L" valve with pneumatic rotary actuator 1/4 3/2-way "L" valve with pneumatic rotary actuator 2
Valves with pneumatic actuators

T-stainless steel valve 3/8 3/2-way with pneumatic rotary actuator

Metal Work
VB3T2IA010032
€224.39 (€185.45 tax excl.)
3/8" valve in stainless steel dial, 3 ways 2 positions, 3/2, with configuration in "T", with double effect pneumatic rotary actuator. For control of air, gases or non-corrosive and non-flammable fluids. Valve made of stainless steel. The valve has a manual activation control. Valves with ATEX certification. Reference: VB3T2IA010032D...
Compact valve for fluids 1...
Valves with pneumatic actuators

Compact valve for fluids 1 1/2 NC with pneumatic actuator Fluxa series - Aignep

Aignep
51112
€141.09 (€116.60 tax excl.)
Compact seat valve, with simple acting pneumatic actuator , 60mm diameter, and normally closed (NC), with 1" 1/2 thread. FKM gaskets. The actuator body is made of anodized aluminum alloy and is pneumatically actuated. The valve is made of brass. Reference: 51112 Representative image for illustrative purposes, the item supplied will correspond to the...
Angled seat valve 1 NC...
Valves with pneumatic actuators

Angled seat valve 1 NC actuator in INOX diameter 63 - Aignep

Aignep
X1Y0910630
€192.29 (€158.92 tax excl.)
Normally closed (NC) simple acting inclined seat valve with 1" thread. PTFE gaskets which allow it to work in a wide range of temperatures in the fluid (-10ºC to +180ºC). The actuator body is manufactured in AISI 304 stainless steel and is pneumatically actuated. The valve can be installed in any mounting position, the body manufactured in the shape of a...

Customers who bought this product also bought:

Home
Product added to wishlist