Pack

Full ISO square articulation - ADAJUSA

Rear female charnela for diameter cylinder 32 AIRON - ADAJUSA

Axis Ø32 for ISO articulation - ADAJUSA

Aluminium cylinder back cover Ø32 AIRON - ADAJUSA

Full ISO square articulation - ADAJUSA

Rear female charnela for diameter cylinder 32 AIRON - ADAJUSA

Axis Ø32 for ISO articulation - ADAJUSA

Aluminium cylinder back cover Ø32 AIRON - ADAJUSA

Square joint Iso full diameter 32

€19.40 Tax included

€16.03 tax excl.

Full square artifice (charnela, shaft and back cover) in aluminium for ISO cylinder of Ø32

Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

This pack contains

1x

Axis Ø32 for ISO articulation - ADAJUSA

Diameter axis 32 for ISO joint

€1.77

1x

Aluminum counter-plate for cylinder - adajusa.com.

Countercharnela aluminum cylinder diameter 32

€9.21

1x

Charnela rear female for diameter cylinder 32 AIRON - adajusa.es

Charnela female rear cylinder diameter 32

€8.42

No queries yet, leave the first!

Description
Frequently questions

Full square artifice in aluminium for ISO cylinder of Ø32

Manufacturer: Airon

The supply includes:

1 Hind female Charnela
1 Shaft (bolt)
1 Countercharnela squad
8 Screws

Material for professional use, install in compliance with the regulations in force at the place of installation.

Questions

Be the first to ask a question about this product!

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

Responsible: ADAJUSA (CONSTRUCCIONES PBR, S.L.), purpose: Respond to requests for information, legitimacy: consent of the interested party, recipients: data will not be communicated to third parties, rights: Access, rectify and delete data, as well as other rights, as explained in the additional information. (read)

You might also like

Rear joint male for diameter cylinder 32 AIRON - adajusa.es

Pneumatic cylinder accessories

Rear joint male cylinder diameter 32

€9.62 (€7.95 tax excl.)

Male rear joint for pneumatic cylinder diameter 32mm.Reference: CM.032Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Fixed squadron cylinder diameter 32 - ADAJUSA

Pneumatic cylinder accessories

Cylinder fixing Squad diameter 32

€3.41 (€2.82 tax excl.)

Fixing Squad for pneumatic cylinder diameter 32mm. This fixing bracket is suitable for cylinders manufactured according to ISO 15552 - ISO 6431 of any brand. Reference: PB.032 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Support magnetic detector cylinder Ø32-Ø40 - Metal Work - ADAJUSA

Pneumatic cylinder accessories

Magnetic detector support cylinder diameter 32/40 - Metal Work

€7.02 (€5.80 tax excl.)

Support for magnetic detector, allows the installation of this detector on pneumatic cylinders of diameter 32 or 40 mm. Reference: W0950000711Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Rear joint for pneumatic cylinder

Rear joint for pneumatic cylinder 2

Pack

Pneumatic cylinder accessories

Rear joint for cylinder diameter 40mm with axle

€11.20 (€9.26 tax excl.)

Female rear joint for cylinder Ø40 manufactured according to ISO standard. Mounting on pneumatic cylinders. Made of aluminum. The supply includes the shaft.Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

16 other products in the same category:

2-wire reed magnetic sensor with M8 connector - Metal Work - ADAJUSA

Pneumatic cylinder accessories

Reed square magnetic sensor 2-wire with M8 connector - Metal Work

€27.99 (€23.13 tax excl.)

Magnetic sensor, magnetic detector, reed type contacts (2 wires) with M8 connector (300mm cable finished in M8 connector) Valid for mounting on ISO Metal Work and Mindman cylinders. Reference: W0952028184 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Full ISO square articulation - ADAJUSA

Full ISO square articulation - ADAJUSA 2

Pack

Pneumatic cylinder accessories

Square joint ISO full diameter 80

€41.41 (€34.22 tax excl.)

Full square artifice (tray, shaft and countercharnela) in aluminium for ISO cylinder of Ø80Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

3-wire PNP magnetic hall sensor with cable and sensor clamp diameter 20 - Metal Work - adajusa.es

3-wire PNP magnetic hall sensor with cable and sensor clamp diameter 20 - Metal Work - adajusa.es 2

Pack

Pneumatic cylinder accessories

Magnetic sensor hall PNP 3 wires cable and clamp 20 - Metal Work

€30.19 (€24.95 tax excl.)

Magnetic sensor, magnetic detector, normally open (NA), with magnetic hall pickup and PNP output, with cable included 3 wires and fixing bracket for cylinders 20 (ISO 6432).Representative image for illustrative purposes, the article supplied shall correspond to the specifications indicated.

Extension for magnetic...

Pneumatic cylinder accessories

Extension for magnetic sensors with straight connector 5m - Aignep

€15.31 (€12.65 tax excl.)

3-wire cable or extension with a 5-meter-long straight connector for magnetic sensors, made of polyurethane (PUR), offering high resistance to abrasion and chemicals in industrial environments. It is used to extend the distance between the sensor and the actuator in industrial applications. Series: Sensors Reference: PX5000PUR Representative image for...

Magnetic sensor reed 2 wires with M8 connector and sensor clamp diameter 20 - Metal Work - adajusa.es

Magnetic sensor reed 2 wires with M8 connector and sensor clamp diameter 20 - Metal Work - adajusa.es 2

Pack

Pneumatic cylinder accessories

Magnetic sensor reed 2 wires M8 connector and clamp 20 - Metal Work

€31.44 (€25.98 tax excl.)

Magnetic sensor with cable included 2 wires (reed) with M8 connector and fixing bracket for cylinders 20 (ISO 6432).Representative image for illustrative purposes, the article supplied shall correspond to the specifications indicated.

Ball joint stem diameter 50...

Ball joint stem diameter 50... 2

Pneumatic cylinder accessories

Ball joint stem diameter 50 and 63 M16x1.5 maintenance-free

€15.28 (€12.63 tax excl.)

Ball joint for pneumatic cylinder rod diameter 50 and 63 mm. Type GA-M. Female thread M16x1.5mm, maintenance-free. Reference: 80801240 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Aluminum counter-frame for cylinder -50 AIRON - adajusa.es

Pneumatic cylinder accessories

Contracharnela aluminum cylinder diameter 50

€13.64 (€11.27 tax excl.)

Aluminum countercharnella for cylinder Ø50 ISO joints. Mounting on pneumatic cylinders.Reference: AS.050Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

3-Wire PNP Hall Magnetic Sensor - Metal Work - ADAJUSA

Pneumatic cylinder accessories

Wire Magnetic 3-Hall PNP with Cable - Metal Work

€26.74 (€22.10 tax excl.)

Square magnetic sensor, magnetic detector, normally open (NA), with magnetic hall collector and PNP output, with cable included 3 wires. Valid for mounting on ISO Metal Work and Mindman cylinders. Reference: W095434 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Rear joint male for diameter cylinder 80 AIRON - adajusa.es

Pneumatic cylinder accessories

Rear joint male cylinder diameter 80

€18.23 (€15.07 tax excl.)

Male rear joint for pneumatic cylinder diameter 80mm.Reference: CM.080Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Magnetic sensor hall NPN 3 wire connector M8 - ADAJUSA

Pneumatic cylinder accessories

Magnetic hall sensor NPN 3-wire M8 connector

€36.41 (€30.09 tax excl.)

Magnetic sensor, magnetic detector, normally open (NO), with magnetic hall sensor and NPN transistor output, with 3-pin male M8 connector. Valid for mounting on any cylinder with standard "T" type slot, such as ISO cylinders of the brands Metal Work, Mindman or Aignep. Valid for mounting on ISO cylinders Metal Work, Mindman and Aignep, among...

Female fork M4x0,7 with 4x8 clip - ADAJUSA

Female fork M4x0,7 with 4x8 clip - ADAJUSA 2

Pack

Pneumatic cylinder accessories

Female fork M4x0.7 with 4x8 clip

€1.82 (€1.50 tax excl.)

Female fork with M4x0.7 thread and clip. The fixings have a U-shaped design and two holes for inserting a pin. Its main application is joints and forks for pneumatic cylinder stems.Rod connection thread: M4x0.7mm Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Magnetic sensor hall PNP 3-wire M8 ATEX connector and sensor clamp diameter 16 - Metal Work - adajusa.es

Magnetic sensor hall PNP 3-wire M8 ATEX connector and sensor clamp diameter 16 - Metal Work - adajusa.es 2

Pack

Pneumatic cylinder accessories

Magnetic sensor hall PNP 3 wires M8 ATEX connector and clamp 16 - Metal Work

€46.85 (€38.72 tax excl.)

Magnetic sensor, magnetic detector, normally open (NA), with magnetic hall pickup and PNP output, with M8 ATEX connector and mounting bracket for cylinders 16 (ISO 6432).Representative image for illustrative purposes, the article supplied shall correspond to the specifications indicated.

Charnela rear female for diameter cylinder 50 AIRON - adajusa.es

Pneumatic cylinder accessories

Charnela female rear cylinder diameter 50

€10.78 (€8.91 tax excl.)

Aluminum rear female charnela for cylinder Ø50 ISO joints. Mounting on pneumatic cylinders.Reference: CF.050Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Support magnetic detector cylinder Ø32-Ø40 - Metal Work - ADAJUSA

Pneumatic cylinder accessories

Magnetic detector support cylinder diameter 32/40 - Metal Work

€7.02 (€5.80 tax excl.)

Support for magnetic detector, allows the installation of this detector on pneumatic cylinders of diameter 32 or 40 mm. Reference: W0950000711Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Front fixing flange...

Pneumatic cylinder accessories

Front fixing flange diameter 125

€80.77 (€66.75 tax excl.)

Front flange for fixing a 125mm diameter pneumatic cylinder. For ISO standard cylinders, made of steel. This flange is valid for cylinders manufactured according to ISO 15552 - ISO 6431 of any brand. Reference: FV.125 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Full ISO square articulation - ADAJUSA

Full ISO square articulation - ADAJUSA 2

Pack

Pneumatic cylinder accessories

Square joint ISO full diameter 40

€23.67 (€19.56 tax excl.)

Full square articulation (charnela, shaft and back cover) in aluminium for ISO cylinder of Ø40Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Customers who bought this product also bought:

Selector 2 metal positions 1 open contact (NA) complete

Metal electric selectors

2-position metal selector 1 complete open contact (NO)

€3.00 (€2.48 tax excl.)

Metallic electric selector with short lever, 2 maintained positions, 1 open contact (NO). The supply includes the complete selector with one open contact.Reference: NYBD21KST Representative image for illustrative purposes, the item supplied will correspond to the indicadas.3.12 specifications.3.12

Terminal 4 mm blue TSKA Series

Terminal 4 mm blue TSKA Series 2

Screw terminal blocks - Series TSKA

Terminal 4 mm blue TSKA Series

€0.40 (€0.33 tax excl.)

Terminal blue 4mm for DIN rail, screw connection and tightening by clamp. Quick installation and use for general applications. Part number: TSKA4-K Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Cylinder 32x150 Double Effect - Metal Work

Pneumatic cylinders 32

Cylinder 32x150 double effect - Metal Work

€78.96 (€65.26 tax excl.)

Pneumatic cylinder Ø32x150 double magnetic effect. According to ISO 15552 (Ex ISO 6431). Extruded aluminum body with magnetic detector slots and chromed steel stem. Reference: 1213320150CNRepresentative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Bag 100 double toe 1mm pre-insulated

Double insulated toe caps

Bag of 100 pre-insulated 1mm double toe

€2.30 (€1.90 tax excl.)

Bag of 100 pre-insulated double hollow toe for 1 mm2 cable, red color. Manufactured according to norm . Red colorReference: 2040174 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

MCB circuit breaker 3 poles...

MCB circuit breaker 3 poles... 2

MCB circuit breakers 3 poles

MCB circuit breaker 3 poles 20A (3x20A) Curve C - LS

€16.92 (€13.98 tax excl.)

3-pole 20A Curve C MCB circuit breaker , for protection against short circuits and overloads in three-phase installations. With an assigned cutting power of 6000A. Reference: BKJ63N 3P C20A Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Cylindrical swivel elbow fitting 1/8 tube .8

Fittings swivel elbow

Cylindrical swivel elbow fitting 1/8 tube 8 technopolymer - Metal Work

€2.40 (€1.98 tax excl.)

Racor rotating elbow 1/8 for tube ØExt 8mm. Male cylindrical thread, with O-ring included. Fast, very simple and efficient connection that allows reconnection thousands of times without compromising the perfect pneumatic and mechanical retention. Racor valid for pneumatic and vacuum installations. Reference: 2L34009 Representative image for...

1/8-3/2 NC Ball Pneumatic...

Pneumatic Limit switchs

1/8-3/2 NC Ball Pneumatic Stroke End - Mindman

€20.28 (€16.76 tax excl.)

Limit Switch pneumaticvalve, mechanically operated pneumatic valve, 1/8 3-way normally closed (NC) thread. The limit switch is driven by a front metal ball.Reference: 281EPA100A Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

View

Cylinder 32x50 Double Effect - Metal Work

Pneumatic cylinders 32

Cylinder 32x50 double effect - Metal Work

€72.22 (€59.69 tax excl.)

Pneumatic cylinder Ø32x50 double magnetic effect. According to ISO 15552 (Ex ISO 6431). Extruded aluminum body with magnetic detector slots and chromed steel stem. Reference: 1213320050CNRepresentative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

View

Pneumatic cylinder 25x250...

Pneumatic Cylinders

Pneumatic cylinder 25x250 double acting damped MH0250250 - Aignep

€63.11 (€52.16 tax excl.)

Pneumatic cylinder Ø25 stroke 250mm, double damped and magnetic effect. Manufactured in Italy according to ISO 6432 standard, prepared for magnetic detectors, chrome-plated steel stem. ATEX cylinders as standard. Reference: MH0250250 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

View

Accessories for aluminium profiles

Cover for aluminum profile 30x30 curved

€0.99 (€0.82 tax excl.)

Cover for aluminum profile of 30x30 curved. Made of black or gray polyamide.Reference: 12003 - Color BlackReference: 12129 - Grey Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Home

Product added to wishlist