Metal filter group (Filter + Purifier) Syntesi Metal Work - ADAJUSA
Metal filter group (Filter + Purifier) Syntesi Metal Work - ADAJUSA

Pneumatic filtering and purification unit 1/8 filtering grade 5 semi-automatic purge Syntesi series - Metal Work

€105.78 Tax included

87.42 tax excl.

5611F10D101

Pneumatic filtration and purifier unit with 1/8 thread, Syntesi series, size SY1, with semi-automatic drain. Made of high-resistance technopolymer and threads on a metal support.

Reference: 5611F10D101


Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

No queries yet, leave the first!
Privacy
Shipments
Returns
 

Pneumatic filtration and purifier unit with 1/8 thread, Syntesi series, size SY1, with semi-automatic drain. Made of high-resistance technopolymer and threads on metal support

Among the main characteristics of this filter group, it has a great flow performance compared to its size and reduced weight, satisfying the current demand for miniaturization and performance. The filter discharge system is by means of a semi-automatic purge of condensation, independent of pressure and flow.

Characteristics of the filter group:

  • Manufacturer: Metal Work
  • Manufacturer reference : FIL+DEP SY1 1/8 05 RMSA
  • Code: 5611F10D101 
  • Thread size: 1/8"
  • Filter condensate discharge: RMSA
  • Scrubber Condensation Discharge: RMSA
  • Filtration filtration degree ( μm) : 5 μm
  • Maximum inlet pressure (MPa / bar / psi): 1.5 / 15 / 217
  • Suggested flow at 6.3 bar (0.63 MPa; 91 psi) Nl/min: 550
  • max temperature at 1MPa; 10 bar; 145psi ( °C): 50
  • Wall fixing screws: number 2 M4 screws
  • Fluid: compressed air or other inert gases
  • Filter / scrubber tank capacity: 30/15 cm3
  • Mounting position: upright
  • Coupling for additional air intakes: 1/8", front and rear
  • Flow rate of additional air intakes at 6.3 bar (Nl/min): 500
Note: the maximum inlet pressure for the RA version must not exceed 10 bar.

For other sizes or references: consult.

Dimensions:

Material for professional use, install in compliance with the regulations in force at the place of installation.

For more information, you can download the technical sheet by clicking on the "Annexes" tab.

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

Responsible: ADAJUSA (CONSTRUCCIONES PBR, S.L.), purpose: Respond to requests for information, legitimacy: consent of the interested party, recipients: data will not be communicated to third parties, rights: Access, rectify and delete data, as well as other rights, as explained in the additional information. (read)

You might also like

Pressure gauges 40mm 1/8 0-12 Bar Metal Work | ADAJUSA Pressure gauges 40mm 1/8 0-12 Bar Metal Work | ADAJUSA 2
Gauges and measurement elements

Manometer 40 1/8 0-12 bar back plastic box - Metal Work

Metal Work
MWMP4318012
€5.65 (€4.67 tax excl.)
Pressure gauge diameter 40 with plastic case. Pressure gauge to control the pressure of the machine to be used. Black plastic case and rear connection with G thread 1/8". The internal mechanisms are made of brass and bronze. With metal dial, graduation in bar and psi. Steel needle.Reference: MP4318012 Representative image for illustrative purposes,...

1 other product in the same category:

Customers who bought this product also bought:

Active carbon filter Size 1 Syntesi Metal Work - ADAJUSA
Syntesi activated carbon filter

Active carbon filter 1/4 semi-automatic purge Syntesi series - Metal Work

Metal Work
5612C102
€78.72 (€65.06 tax excl.)
Active carbon filter 1/4 RMSA Size 1 achieves the highest standard of purification possible in industrial applications. for retention of solid or liquid impurities from the air compressor. Syntesi group.Reference: 5612C102Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications. 
Pressure gauge 40 1/8 0-4 Kgr box in plastic - Metal Work Pressure gauge 40 1/8 0-4 Kgr box in plastic - Metal Work 2
Gauges and measurement elements

Manometer 40 1/8 0-4 bar back plastic box - Metal Work

Metal Work
MWMP431804
€6.17 (€5.10 tax excl.)
Pressure gauge diameter 40 with plastic box. Pressure gauge to control the pressure of the machine to be used. Steel case painted in black and rear connection with G thread 1/8". The internal mechanisms are made of brass and bronze. With metal dial, graduation in bar and psi. Steel needle.Reference: MP431804Representative image for illustrative purposes,...
Pressure switch 1/8 no with protective head - ADAJUSA
  • Pack
Vacuum switches, pressure switches and flowmeters

Pressure switch 1/8 contact closed with protection head - Metal Work

Metal Work
PK-PRESNC
€17.42 (€14.40 tax excl.)
1/8 pneumaticpressure switch with closed contact, adjustable pressure range between 1 and 10 bar. With protection cover providing IP54 degree of protection. When the set pressure is reached, the contact switches to open position. Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.
Home
Product added to wishlist