1/8 female 3-way cutting step valve - Metal Work - ADAJUSA

1/8 female 3-way cutting step valve - Metal Work - ADAJUSA

1/8 female 3-way cutting step valve - Metal Work - ADAJUSA

1/8 female 3-way cutting step valve - Metal Work - ADAJUSA

1/8 female 3-way cutting step valve - Metal Work - ADAJUSA

1/8 female 3-way cutting step valve - Metal Work - ADAJUSA

Valve cutting step 1/8 female 3-way - Metal Work

€8.82 Tax included

€7.29 tax excl.

1/8 female step valve (cut),discharged (3-way).

Logotipo Metal Work
Reference: W0970050001
Representative image for illustrative purposes, the article supplied shall correspond to the specifications indicated.

No queries yet, leave the first!

1/8 female step valve ,shedding (3-way), frequently used as a circuit disconnector valve.

By pushing back the ring, the air supply is interrupted and the circuit is discharged, when the ring advances air supply to the circuit is established.

Manufacturer: Metal Work
Manufacturer reference: W0970050001 series VCS-1/8.
Operating pressure: 0 ÷ 10 bar (0 ÷ 1 MPa)
Operating temperature °C: –10 ÷ 80
Fluid: Filtered air with or without lubrication
Flow rate at 6.3 bar (0.63 Mpa ÷ 91 psi) ∆P 0.5 bar Nl/min: 430
Flow rate at 6.3 bar (0.63 Mpa ÷ 91psi) ∆P 1bar Nl/min: 630
Conductance C Nl/min · bar: 170
Critical ratio b bar/ba: 0.2

Material for professional use, install in compliance with the regulations in force at the place of installation.

To expand the information you can download the technical sheet by clicking on the "Attachments" tab

Auxiliary valves

Download (844.62KB)

Questions

Be the first to ask a question about this product!

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

Responsible: ADAJUSA (CONSTRUCCIONES PBR, S.L.), purpose: Respond to requests for information, legitimacy: consent of the interested party, recipients: data will not be communicated to third parties, rights: Access, rectify and delete data, as well as other rights, as explained in the additional information. (read)

You might also like

1/4 female 3-way cutting step valve - Metal Work - ADAJUSA

1/4 female 3-way cutting step valve - Metal Work - ADAJUSA 2

Cutting and unloading valves

Cutting step valve 1/4 female 3-way - Metal Work

€10.59 (€8.75 tax excl.)

Valve of passage (cut) of 1/4 female, with discharge (3 ways).Reference: W0970050002 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Step valve (cut) 3/8 female 3-way

Step valve (cut) 3/8 female 3-way 2

Cutting and unloading valves

Valve cutting step 3/8 female 3-way - Metal Work

€13.26 (€10.96 tax excl.)

3/8 female step valve (cut),discharged (3-way). Reference: W0970050003Representative image for illustrative purposes, the article supplied shall correspond to the specifications indicated.

1/2 female 3-way cutting step valve - Metal Work - ADAJUSA

1/2 female 3-way cutting step valve - Metal Work - ADAJUSA 2

Cutting and unloading valves

Valve cutting step 1/2 female 3-way - Metal Work

€17.17 (€14.19 tax excl.)

1/2 female step valve (cut) with discharge (3-way). Reference: W0970050004Representative image for illustrative purposes, the article supplied shall correspond to the specifications indicated.

16 other products in the same category:

1/2 female 3-way cutting step valve - Metal Work - ADAJUSA

1/2 female 3-way cutting step valve - Metal Work - ADAJUSA 2

Cutting and unloading valves

Valve cutting step 1/2 female 3-way - Metal Work

€17.17 (€14.19 tax excl.)

1/2 female step valve (cut) with discharge (3-way). Reference: W0970050004Representative image for illustrative purposes, the article supplied shall correspond to the specifications indicated.

1/4 female 2-way cutting valve with lever

Cutting and unloading valves

Cut-off valve 3/8 female 2 way with lever

€5.99 (€4.95 tax excl.)

Cut-off valve 3/8 female 2 way with lever, for pneumatic applications.Reference: VHH.3Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

1/8-way female cutting microvalve - Metal Work - ADAJUSA

1/8-way female cutting microvalve - Metal Work - ADAJUSA 2

Cutting and unloading valves

Female cutting microvalve 1/8-way - Metal Work

€6.03 (€4.98 tax excl.)

2-way female 1/8" thread cutting microvalve, lever driven, for pneumatic applications.Reference: 810100100 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

1/2 female shut-off valve...

Cutting and unloading valves

1/2 female shut-off valve with decompression hole - Aignep

€77.92 (€64.40 tax excl.)

Shut-off valve or G1/2 female ball valve (ISO 228 compliant), 2- way , lever operation. Valve provided with a decompression orifice with exhaust to the atmosphere allowing the controlled release of the fluid. Body made of nickel-plated brass and steel lever. Valve for pneumatic applications. Series: GHILUX Reference: 6755L 1/2 Representative image for...

1/8 female 2- way shut-off...

Cutting and unloading valves

1/8 female 2- way shut-off valve with exhaust - Aignep

€8.40 (€6.94 tax excl.)

Shut-off valve or G1/8 female ball valve (ISO 228 compliant), 2- way , actuated by handle. It has exhaust to the atmosphere allowing the controlled release of the fluid. Made of chromed brass and handle made of fiberglass reinforced polyamide.Small valve for pneumatic applications of compressed air, tools, automation, food and beverages, plumbing, vacuum...

1/4 female 2- way shut-off...

Cutting and unloading valves

1/4 female 2- way shut-off valve with T handle - Aignep

€6.59 (€5.45 tax excl.)

Shut-off valve or G1/4 female ball valve (ISO 228 compliant), 2 way , actuated by T-shaped handle. Body made of nickel-plated brass and aluminum handle. Valve for pneumatic, hydraulic, heating and air conditioning applications. Series: GHILUXReference: 6071 1/4 Representative image for illustrative purposes, the item supplied will correspond to the...

3/8 female 2 way INOX...

Cutting and unloading valves

3/8 female 2 way INOX cut-off valve with lever Aignep

€14.07 (€11.63 tax excl.)

Shut-off valve or G3/8 female ball valve, 2- way , lever operation. Body made of AISI 316 L STAINLESS steel and PVC maneuvering cam . Small valve for pneumatic applications of compressed air, tools, automation, food and beverages, plumbing, vacuum and inert gases, thermo-hydraulic sector. Series: GHINOX Reference: 6067I 3/8 Representative image for...

1-female 3 way type L...

Cutting and unloading valves

1-female 3 way type L cut-off valve - Aignep

€103.46 (€85.50 tax excl.)

G1 female shut-off valve or ball valve (ISO 228 compliant), 3- way type "L", lever operation. Made of nickel-plated brass and aluminum cam,These valves allow you to control the flow in different directions, they are very useful when it is necessary to change the flow between two lines without interrupting it completely. This type of valves are used to...

1/2 Two Way Lock Valve -...

Lock valves

1/2 Two Way Lock Valve - Aignep

€51.33 (€42.42 tax excl.)

Bidirectional blocking valve, with 1/2" thread , and control connection for 10mm outer diameter tube. This valve allows the complete blocking of the air passage in either direction. The main application of this type of valve is block or prevent the passage of air in a pneumatic circuit. Manufactured in a metallic body. Reference: 8890 1/2 Representative...

Long handle with shaft for...

Long handle with shaft for... 2

Cutting and unloading valves

Long handle with shaft for 1/2, 3/4 shut-off valves - Aignep

€3.80 (€3.14 tax excl.)

Control shaft extension for shut-off valves or ball valves. The set includes long handle, screw and plate. Valid for 1/2 and 3/4 GHILUX Series valves from the Aignep brand. Series: GHILUXReference: 6915 B Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

1/2 female 2 way shut-off...

Cutting and unloading valves

1/2 female 2 way shut-off valve - Metal Work

€5.13 (€4.24 tax excl.)

2- way 1/2" female thread shut-off valve, actuated by handle, for pneumatic applications. Reference: 010100104 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Cutting valve 3/8 female...

Cutting and unloading valves

Cutting valve 3/8 female 2-way - Metal Work

€4.49 (€3.71 tax excl.)

3/8" 2-way female thread shut-off valve, lever driven, for pneumatic applications.Reference: Z33010100103 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

3/4 female 2- way shut-off...

Cutting and unloading valves

3/4 female 2- way shut-off valve - Aignep

€12.66 (€10.46 tax excl.)

Shut-off valve or 3/4 female ball valve (RP in accordance with ISO 7), 2- way , actuated by handle. Made of chromed brass and handle made of fiberglass reinforced polyamide.Small valve for pneumatic applications of compressed air, tools, automation, food and beverages, plumbing, vacuum and inert gases, thermo-hydraulic sector. It has BS EN 331:2015...

1 1/4 female shut-off valve...

Cutting and unloading valves

1 1/4 female shut-off valve with discharge valve - Aignep

€36.22 (€29.93 tax excl.)

Shut-off valve or G1 1/4 female ball valve (ISO 228 compliant), lever operation. Body made of nickel-plated brass and steel lever. Valve provided with a discharge valve that allows regulating the flow in hydraulic, heating, conditioning and pneumatic systems. Series: GHILUX Reference: 6076 1 1/4 Representative image for illustrative purposes, the item...

Valve with lever 1 1/4...

Cutting and unloading valves

Valve with lever 1 1/4 female 2- way INOX cut-off - Aignep

€43.63 (€36.06 tax excl.)

Shut-off valve or G1 1/4 female, 2- way ball valve, lever operation. Body made of AISI 316 L STAINLESS steel and PVC maneuvering cam . Small valve for pneumatic applications of compressed air, tools, automation, food and beverages, plumbing, vacuum and inert gases, thermo-hydraulic sector. Series: GHINOX Reference: 6067I 1 1/4 Representative image for...

Long handle with shaft for...

Long handle with shaft for... 2

Cutting and unloading valves

Long handle with shaft for 1/8, 1/4, 3/8 shut-off valves - Aignep

€3.27 (€2.70 tax excl.)

Control shaft extension for shut-off valves or ball valves. The set includes long handle, screw and plate. Valid for 1/8, 1/4, 3/8 GHILUX Series valves from the Aignep brand. Series: GHILUXReference: 6915 A Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Customers who bought this product also bought:

Cap from friction SF-1F 30160C type PAF 30160 P10 PTFE - ADAJUSA

Friction cap PAP and PAF- P10 and P20

Walloon plain bearing SF1F 30160C type PAF 30160 P10 - ISB

€2.82 (€2.33 tax excl.)

Self-lubricating flange type bushing SF1F 30x34x16mm PAF P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered. Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications....

Straight fittings

Straight automatic straight fitting 1/4 pipe 6mm Series 50000 - Aignep

€1.32 (€1.09 tax excl.)

Straight male cylindrical 1/4 thread fitting for 6mm pipe with gasket, made of chrome-plated brass . Very efficient connection simple that allows reconnection thousands of times without compromising the perfect pneumatic and mechanical retention. Series: 50000Part number: 50020 6 1/4 Representative image for illustrative purposes, the item supplied...

Limit Switch 3/2 NC one-way...

Limit Switch 3/2 NC one-way... 2

Pneumatic Limit switchs

Limit Switch 3/2 NC one-way cam diameter 4 side fittings - Metal Work

€22.61 (€18.69 tax excl.)

Limit Switch pneumatic with unidirectional cam drive, fittings located on the side, for outer diameter tube of 4 mm. The valve type of the limit switch is normally closed (NC). Reference: W3501001301 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Signallers "8" for cables 1 to 2.5mm (Bag 100 units)

Signalling elements

Signallers 8 for cables from 1 to 2.5mm (Bag 100 units)

€2.47 (€2.04 tax excl.)

Pre-cut signallers for cables marked "8", for electrical installations, cable size from 1mm to 2.5mm.Bag of 100 units (in 5 strips of 20 numbers).Representative image for illustrative purposes, the item supplied will correspond to the indicated

Tensioner clamp for cylinders diameter 16 - Metal Work - adajusa.es

Tensioner clamp for cylinders diameter 16 - Metal Work - adajusa.es 2

Pneumatic cylinder accessories

Tensioner clamp for cylinders diameter 16 - Metal Work

€3.41 (€2.82 tax excl.)

Cylinder rack clamp Ø16 Valid for mounting on ISO Metal Work and Mindman cylinders. Reference: W0950000616 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Cap from friction SF2 081012C type PAP 0812 P20 - ADAJUSA

Friction cap PAP and PAF- P10 and P20

Hollow core bearing SF2 081012C type PAP 0812 P20 - ISB

€0.28 (€0.23 tax excl.)

SF2 08x10x12mm PAP P20 honeycombed plain bearing, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other...

Fixed squadron cylinder diameter 32 - ADAJUSA

Pneumatic cylinder accessories

Cylinder fixing Squad diameter 32

€3.35 (€2.77 tax excl.)

Fixing Squad for pneumatic cylinder diameter 32mm. This fixing bracket is suitable for cylinders manufactured according to ISO 15552 - ISO 6431 of any brand. Reference: PB.032 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pneumatic cylinder 63x125...

Pneumatic cylinder 63x125... 2

Pneumatic cylinders .63

Pneumatic cylinder 63x125 double-acting LH0630125 - Aignep

€91.80 (€75.87 tax excl.)

Pneumatic cylinder Ø63 stroke 125mm, double magnetic effect and with pneumatic cushioning. Made in Italy according to ISO 15552 (Ex ISO 6431). Extruded aluminum body with grooves for magnetic detectors, chrome-plated steel piston rod. ATEX cylinders as standard.Reference: LH0630125 Representative image for illustrative purposes, the item supplied will...

View

Signallers "7" for cables 1 to 2.5mm (Bag 100 units)

Signalling elements

Signallers 7 for cables from 1 to 2.5mm (Bag 100 units)

€2.47 (€2.04 tax excl.)

Pre-cut signallers for cables marked "7", for electrical installations, cable size from 1mm to 2.5mm.Bag of 100 units (in 5 strips of 20 numbers).Ref: 1811-7Representative image for illustrative purposes, the item supplied will correspond to the indicated

3-wire PNP magnetic hall sensor with cable and sensor clamp diameter 20 - Metal Work - adajusa.es

3-wire PNP magnetic hall sensor with cable and sensor clamp diameter 20 - Metal Work - adajusa.es 2

Pack

Pneumatic cylinder accessories

Magnetic sensor hall PNP 3 wires cable and clamp 20 - Metal Work

€29.66 (€24.51 tax excl.)

Magnetic sensor, magnetic detector, normally open (NA), with magnetic hall pickup and PNP output, with cable included 3 wires and fixing bracket for cylinders 20 (ISO 6432).Representative image for illustrative purposes, the article supplied shall correspond to the specifications indicated.

Home

Product added to wishlist