Pneumatic filter 3/4 20 EVO series automatic drain | Aignep | ADAJUSA | price

Pneumatic filter 3/4 20 EVO series automatic drain | Aignep | ADAJUSA | price

Filter 3/4 20 microns automatic drain size 3 FRL EVO series - Aignep

€81.03 Tax included

66.97 tax excl.

Y010307202000

3/4 filter, with a filtration degree of 20μm and automatic discharge, size 3, for retention solid or liquid impurities from the air compressor. These filter vessels are made of technopolymer and with metal finishes. Made in Italy.

Series: FRL Evo
Reference: Y010307202000
Pneumatic symbol filter Adajusa
Aignep logo

Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

No queries yet, leave the first!

3/4 filter vessel with a filtration grade of 20μm to retain solid or liquid impurities from the air compressor. Compact size (T3). The drain type is automatic, discharging the condensate when it reaches the maximum allowed level regardless of the operating pressure.

Characteristics:

Manufacturer: Aignep
Manufacturer reference: Y010307202000
Threaded drive: 3/4"
Group size: size 3.
Filtered grade: 20 μm
Maximum inlet pressure: 13 bar
Flow rate at 6.3 bar (0.63 MPa; 91 psi) ∆P 1 bar (0.1 MPa; 14 psi) (Nl/min): 7900
Fluid: Compressed air or other inert gases
Cup capacity (condensation) (cm3): 151
Mounting position: Vertical.
Working temperature: -10 to +50ºC.

For other sizes or references: consult.

Dimensions of the Aignep Adajusa EVO series filter

Professional use material, install in compliance with the regulations in force at the installation site.

For further information you can download the technical sheet by clicking on the "Attached Files" tab.

Catalogo FRL EVO

Download (4.94MB)

Questions

Be the first to ask a question about this product!

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

Responsible: ADAJUSA (CONSTRUCCIONES PBR, S.L.), purpose: Respond to requests for information, legitimacy: consent of the interested party, recipients: data will not be communicated to third parties, rights: Access, rectify and delete data, as well as other rights, as explained in the additional information. (read)

You might also like

Lubricator 1/2 technopolymer

Filter groups of 1/2 FR-L

Lubricator 1/2 technopolymer Syntesi - Metal Work

€48.68 (€40.23 tax excl.)

1/2 pneumatic lubricating cup, in technopolymer. Manufacturer Metal Work. Representative image for illustrative purposes, the article supplied shall correspond to the specifications indicated. Representative image for illustrative purposes, the article supplied shall correspond to the specifications indicated.

1/4 metal pressure regulator and pressure gauge - Mindman

1/4 metal pressure regulator and pressure gauge - Mindman 2

Delivery in 3 days.

Filter groups of 1/2 FR-L

1/2 metal pressure regulator and pressure gauge - Mindman

€39.85 (€32.93 tax excl.)

Pressure regulator of 1/2 0-8,5 Kgrs., with metal body, high flow. Fixation by square. Integrated pressure gauge on the head. The pressure regulator is supplied with the fixing bracket. Reference: 281MAR30215A Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

1/4 metal filter-regulator with pressure gauge - Mindman

1/4 metal filter-regulator with pressure gauge - Mindman 2

Filter groups of 1/2 FR-L

Metallic filter-regulator 1/2 - Mindman 302

€47.70 (€39.42 tax excl.)

Filter unit with pneumatic pressure regulator 1/2 metallic, metal head and plastic cup, with pressure gauge integrated into the regulator.Reference: 281MAFR30215A Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Filter-regulator 1/2 T2 Syntesi - Metal work - ADAJUSA

Syntesi regulator filter

Pneumatic filter-regulator 1/2 0-8 bar automatic drain Syntesi series - Metal Work

€80.69 (€66.69 tax excl.)

Filter with 1/2 pneumatic pressure regulator, 1/2 maintenance unit for pneumatic applications, automatic drain, compact size (SY2) and regulation range 0-8 kg/cm2, filtration degree of 5 μm. These filter groups are made of technopolymer and nickel-plated brass with excellent resistance to corrosion. European manufacturing. Series:...

Filter-regulator 1/2 T2 Syntesi - Metal work - ADAJUSA

Syntesi regulator filter

Pneumatic filter-regulator 1/2 0-12 bar automatic drain Syntesi series - Metal Work

€80.69 (€66.69 tax excl.)

Filter with 1/2 pneumatic pressure regulator, 1/2 maintenance unit for pneumatic applications, automatic drain, compact size (SY2) and regulation range 0-12 kg/cm2, filtration degree of 5 μm. These filter groups are made of technopolymer and nickel-plated brass with excellent resistance to corrosion. European manufacturing. Series:...

16 other products in the same category:

Pneumatic filter group 3/4 FRL EVO Series Aignep | ADAJUSA | price

Pneumatic filter group 3/4 FRL EVO Series Aignep | ADAJUSA | price 2

3/4 FR-L filtering groups

Pneumatic filtering unit 3/4 regulation 0-8 bar automatic drain size 3 FRL EVO series -...

€180.50 (€149.17 tax excl.)

3/4" filter unit, 3/4" maintenance unit for pneumatic applications, automatic drain, compact size (T3) in 2 modules (FR+L), and regulation range 0-8 bar , compact pressure gauge. These filter units are made of technopolymer and with metal finishes. Made in Italy.Series: FRL EvoReference: Y100307232100 Representative image for illustrative purposes,...

3/4 metallic lubricator

3/4 FR-L filtering groups

Lubricator 3/4 metallic New deal - Metal Work

€135.51 (€111.99 tax excl.)

Metal 3/4" pneumatic lubricator cup. New Deal GroupReference: 1523001 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Pneumatic filter group 3/4 FRL EVO Series Aignep | ADAJUSA | price

Pneumatic filter group 3/4 FRL EVO Series Aignep | ADAJUSA | price 2

3/4 FR-L filtering groups

Pneumatic filtering unit 3/4 regulation 0-8 bar semi-automatic purge size 3 FRL EVO...

€155.03 (€128.12 tax excl.)

3/4" filter unit, 3/4" maintenance unit for pneumatic applications, semi-automatic drain, compact size (T3) in 2 modules (FR+L), and regulation range 0-8 bar , compact pressure gauge. These filter units are made of technopolymer and with metal finishes. Made in Italy.Series: FRL EvoReference: Y100307231100 Representative image for illustrative...

Pressure gauge for 63mm panel with stand - Metal Work - ADAJUSA

Pressure gauge for 63mm panel with stand - Metal Work - ADAJUSA 2

Pack

Gauges and measurement elements

Pressure gauge for panel 63mm 1/4 0-12 bar with stand - Metal Work

PK-MAN6320G4G12SOP

€15.84 (€13.09 tax excl.)

Pressure gauge diameter 63mm with stainless steel case filled with glycerin, pressure indication between 0 and 12 bar. Pressure gauge to control the pressure of installations, systems or machines. Stainless steel case with rear connection with G 1/4" thread. The internal mechanisms are made of copper alloy. With metal dial, graduation in bar. Steel...

Pressure gauge for 63mm panel with stand - Metal Work - ADAJUSA

Pressure gauge for 63mm panel with stand - Metal Work - ADAJUSA 2

Pack

Gauges and measurement elements

Pressure gauge with glycerin 0 - 10 bar for 63mm panel with stand - Metal Work

PK-MAN6320G4G10SOP

€15.84 (€13.09 tax excl.)

Pressure gauge diameter 63mm with stainless steel case filled with glycerin, pressure indication between 0 and 10 bar. Pressure gauge to control the pressure of installations, systems or machines. Stainless steel case with rear connection with G 1/4" thread. The internal mechanisms are made of copper alloy. With metal dial, graduation in bar. Steel...

Filter 3/4 metallic New Deal - Metal Work - ADAJUSA

3/4 FR-L filtering groups

Filter 3/4 metallic 20 microns semi-automatic purge New Deal - Metal Work

€105.32 (€87.04 tax excl.)

Filter 3/4 metallic , with a filtration degree of 20μm and semi-automatic discharge, for the retention of solid or liquid impurities from the air compressor. These filter cups are made of metal with excellent resistance to corrosion. European manufacturing. Series: New Deal Reference: 1521006 Representative image for illustrative...

1/2 metal pressure regulator - Metal Work

3/4 FR-L filtering groups

Regulator pressure 3/4 0-12 bar metal New deal - Metal Work

€134.19 (€110.90 tax excl.)

Pressure regulator of 3/4 regulation 0-12 Kgrs, extremely reliable and robust metal body. Allows stability of the output pressure to the preset pressure. Possibility of fixing by side holes. The pressure gauge must be ordered separately. Ref: 1502003 - REG 3/4 012 Representative image for illustrative purposes, the article supplied will correspond...

Filter + Lubricator T2 RMSA Syntesi - Metal Work - ADAJUSA

3/4 FR-L filtering groups

Pneumatic filtration group 3/4 regulation 0-12 bar automatic drain Syntesi series -...

€145.67 (€120.39 tax excl.)

3/4 filter group, 3/4 maintenance unit for pneumatic applications, automatic drain, compact size (SY2) in 2 modules (FR+L) and regulation range 0-12 kg/cm2. These filter groups are made of technopolymer and nickel-plated brass with excellent resistance to corrosion. European manufacturing.Series: SynthesisReference: 5625B56L105 Representative image...

Filter + Regulator + Lubricator New Deal - Metal Work - ADAJUSA

Filter groups 3/4

Pneumatic filtration group 3/4 regulation 0-12 bar automatic drain series New Deal -...

€444.24 (€367.14 tax excl.)

3/4 filter group, 3/4 maintenance unit for pneumatic applications, automatic drain, in 3 modules (F+R+L) and regulation range 0-12 kg/cm2. Filtering unit with 20 μm filter. These groups are made of aluminum and plastic tanks with metal protection. European made material.Series: New DealReference: 1524034 Representative image for illustrative...

Lubricator 3/4 technopolymer

3/4 FR-L filtering groups

Lubricator 3/4 technopolymer Syntesi- Metal Work

€56.12 (€46.38 tax excl.)

Pneumatic lubricating vessel of 3/4, in technopolymer. Syntesi Group. Reference: 5625L105Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Pressure gauge 50 1/8 0-12 Kgr plastic box

Gauges and measurement elements

Manometer 50 1/8 0-12 bar back plastic box - Metal Work

€5.66 (€4.68 tax excl.)

Pressure gauge Ø50 with plastic case. Pressure gauge to control the pressure of the machine to be used. Black plastic case and rear connection with G thread 1/8". The internal mechanisms are made of brass and bronze. With metal dial, graduation in bar and psi. Steel needle. Reference: Z33MP5318012 Representative image for illustrative purposes, the...

Filter 3/4 20 RA Size 2 Syntesi Metal Work - ADAJUSA

3/4 FR-L filtering groups

Filter 3/4 20 microns automatic drain size 2 Syntesi series - Metal Work

€74.49 (€61.56 tax excl.)

3/4 filter, with a filtration degree of 20μm and automatic discharge, size 2, for retention of solid or liquid impurities from the air compressor. These filter cups are made of technopolymer and nickel-plated brass with excellent resistance to corrosion. European manufacturing.Series: SynthesisReference: 5625F505Representative image for illustrative...

Filter 3/4 20 RMSA Size 2 Syntesi Metal Work - ADAJUSA

3/4 FR-L filtering groups

Filter 3/4 20 microns semi-automatic drain size 2 Syntesi series - Metal Work

€54.64 (€45.16 tax excl.)

3/4 filter, with a filtration degree of 20μm and semi-automatic discharge, size 2, for retention of solid or liquid impurities from the air compressor. These filter cups are made of technopolymer and nickel-plated brass with excellent resistance to corrosion. European manufacturing.Series: SynthesisReference: 5625F205Representative image for...

Pressure gauge for 63mm panel with stand - Metal Work - ADAJUSA

Pressure gauge for 63mm panel with stand - Metal Work - ADAJUSA 2

Pack

Gauges and measurement elements

Pressure gauge with glycerin 0 - 1.6 bar for 63mm panel with stand - Metal Work

PK-MAN6320G4G1.5SOP

€16.42 (€13.57 tax excl.)

Pressure gauge diameter 63mm with stainless steel case filled with glycerin, pressure indication between 0 and 1,6 bar. Pressure gauge to control the pressure of installations, systems or machines. Stainless steel case with rear connection with G 1/4" thread. The internal mechanisms are made of copper alloy. With metal dial, graduation in bar. Steel...

Pneumatic filter group 3/4 FRL EVO Series Aignep | ADAJUSA | price

Pneumatic filter group 3/4 FRL EVO Series Aignep | ADAJUSA | price 2

3/4 FR-L filtering groups

Pneumatic filtering unit 3/4 regulation 0-12 bar semi-automatic purge size 3 FRL EVO...

€155.03 (€128.12 tax excl.)

3/4" filter unit, 3/4" maintenance unit for pneumatic applications, semi-automatic drain, compact size (T3) in 2 modules (FR+L), and regulation range 0-12 bar , compact pressure gauge. These filter units are made of technopolymer and with metal finishes. Made in Italy.Series: FRL EvoReference: Y100307241100 Representative image for illustrative...

Manometer Ø50 1/4 0-12 Kgr metal box - ADAJUSA

Manometer Ø50 1/4 0-12 Kgr metal box - ADAJUSA 2

Gauges and measurement elements

Manometer diameter 50 1/4 0-12 bar back plastic box - Metal Work

€6.17 (€5.10 tax excl.)

Pressure gauge Ø50 with 1/4" plastic case. Pressure gauge to control the pressure of the machine to be used. Reference: MP5314012Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Home

Product added to wishlist