Cap adapter for motor shaft or reducer from 24mm to 28mm

Name: Cap adapter for motor shaft or reducer from 24mm to 28mm
Brand: Especial-MOT
SKU: CAS-24/28
Price: 12.5114 EUR
Availability: InStock

€12.51 Tax included

€10.34 tax excl.

Cap adapter 24/28 for motor or gearbox shaft, inside diameter 24mm and outside diameter 28mm. Made of steel, this adapter bushing allows to increase the diameter of a motor shaft to adapt it to the input of a gearbox or any other application.

Reference: 24/28

Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

No queries yet, leave the first!

Privacy

Shipments

Returns

Cap adapter with inner diameter 24mm and outer diameter 28mm. Allows to adapt the output shaft of a motor to the input shaft of a gearbox or any other type of application.

Made of ground steel.
The supply includes the key for the bushing.

Technical specifications

Part number: 24/28
Material: Steel
Finish: ground
Inside diameter: 24mm
Outside diameter: 28mm
Key: included

Material for professional use, must be installed in compliance with the regulations in force at the place of installation.

Questions

Be the first to ask a question about this product!

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

16 other products in the same category:

Gearbox accessories

Double output axle T-40 x 18

Generico-MOT

93EDT-40-18

1 review

€11.04 (€9.12 tax excl.)

Double shaft of output type T-40 of Ø18mm., for reducers worm gear crown size 40. Made of rectified steel.

Tensioning guides for electric motors

Tensioning rails for electric motor size 100-112 rail length 395 mm

Generico-MOT

LMGT395/10

€89.18 (€73.70 tax excl.)

Tensioning rails for electric motors with housing sizes 100 and 112. They allow the displacement of the motors while maintaining their alignment at all times. Simple mechanism and easy installation. Rail length 395mm.Delivery includes 2 pieces: two shaft guides each with two sliding fixing blocks.Reference: LMGT395/10Representative image for illustrative...

Bases tensoras para motores eléctricos

Tensioning base for electric motor size 132-B

Generico-MOT

LMBTSMA340

€78.31 (€64.72 tax excl.)

Tensioning base for electric motors with housing size 132-B. Allows adjustment and regulation of belt tensioning and alignment without disassembling the motor. Adjustable plate displacement by means of standard screw. Part No.: LMBTSMA340Picture is representative for illustrative purposes, the item supplied will correspond to the specifications indicated.

Gearbox accessories

FA output flange for gear unit size 130

Generico-MOT

FA-130

€57.93 (€47.88 tax excl.)

Output flange type FA-130 for wormgearboxes size 130. This flange allows a lateral coupling in a very compact way simple. Part No.: FA-130Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Gearbox accessories

Simple output axle T-50 25

Generico-MOT

93EST-50-25

4 reviews

€14.79 (€12.22 tax excl.)

Simple shaft of output type T-50 of Ø25m., for reducers worm gear crown size 50. Made of rectified steel.

Gearbox accessories

FA output flange for gearbox size 110

Generico-MOT

FA-110

€31.31 (€25.88 tax excl.)

Output flange type FA-110 for wormgearboxes size 110. This flange allows a lateral coupling in a very compact way simple. Part No.: FA-110Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Tensioning guides for electric motors

Tensioning rails for electric motor size 80-90 rail length 312 mm

Generico-MOT

LMGT312/8

€59.17 (€48.90 tax excl.)

Tensioning rails for electric motors with housing sizes 80 and 90. They allow the displacement of the motors while maintaining their alignment at all times. Simple mechanism and easy installation. Rail length 312mm. Delivery includes 2 pieces: two shaft guides each with two sliding fixing blocks . Reference: LMGT312/8Representative image for illustrative...

Gearbox accessories

Simple axis output T-30 14

Generico-MOT

93EST-30-14

2 reviews

€9.85 (€8.14 tax excl.)

Simple output shaft type T-30 of 14mm., for auger reducers crown size 30. Made of rectified steel.

Gearbox accessories

Simple axis of output T-25 11

Generico-MOT

93EST-25-11

€6.82 (€5.64 tax excl.)

Simple shaft of output type T-25 of Ø11mm., for reducers worm gear crown size 25. Made of rectified steel.

Bases tensoras para motores eléctricos

Tensioning base for electric motor size 63 to 80

Generico-MOT

LMBTSMA210

€32.82 (€27.12 tax excl.)

Tensioning base for electric motors with housing sizes between 63 and 80. Allows adjustment and regulation of belt tensioning and alignment without disassembling the motor. Adjustable plate displacement by means of standard screw. Part number: LMBTSMA210Representative image for illustrative purposes, the item supplied will correspond to the...

View

Gearbox accessories

Simple output axle T-75 28

Generico-MOT

93EST-75-28

4 reviews

€19.72 (€16.30 tax excl.)

Simple output shaft type T-75 of 28mm., for auger reducers crown size 75. Made of rectified steel.

Gearbox accessories

FA output flange for reducer size 40

Generico-MOT

FA-40

€8.23 (€6.80 tax excl.)

Output flange type FA-40 for wormgearboxes size 40. This flange allows a lateral coupling in a very compact way simple. Part number: FA-40Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Tensioning guides for electric motors

Tensioning rails for electric motor size 80-90 rail length 395mm

Generico-MOT

LMGT395/8

€89.18 (€73.70 tax excl.)

Tensioning rails for electric motors with housing sizes 80 and 90. They allow the displacement of the motors while maintaining their alignment at all times. Simple mechanism and easy installation. Rail length 395mm.Delivery includes 2 pieces: two shaft guides each with two sliding fixing blocks.Reference: LMGT395/8Representative image for illustrative...

Gearbox accessories

Cap adapter for motor shaft or reducer from 11mm to 14mm

Especial-MOT

CAS-11/14

€7.82 (€6.46 tax excl.)

Cap 11/14 adapter for motor or gearbox shaft, inner diameter 11mm and outer diameter 14mm. Made of steel, this adapter bushing allows to increase the diameter of a motor shaft to adapt it to the input of a gearbox or any other application.Reference: 11/14Representative image for illustrative purposes, the item supplied will correspond to the...

Gearbox accessories

Cap 19mm to 24mm drive shaft or gearbox adapter

Especial-MOT

CAS-19/24

€10.96 (€9.06 tax excl.)

Cap 19/24 adapter for motor or gearbox shaft, inner diameter 19mm and outer diameter 24mm. Made of steel, this adapter bushing allows to increase the diameter of a motor shaft to adapt it to the input of a gearbox or any other application.Reference: 19/24Representative image for illustrative purposes, the item supplied will correspond to the...

Tensioning guides for electric motors

Tensioning rails for electric motor size 160-180 rail length 630mm

Generico-MOT

LMGT630/12

€172.01 (€142.16 tax excl.)

Tensioning rails for electric motors with housing sizes 160 and 180. They allow the displacement of the motors while maintaining their alignment at all times. Simple mechanism and easy installation. Rail length 495mm. Delivery includes 2 pieces: two shaft guides each with two sliding fixing blocks.Reference: LMGT630/12Representative image for...

Home

Reviews

Client support

ADAJUSA

C/ Mercurio, 7 28970 Humanes de (Spain)

+34 911354650 +34 912973850

From Monday to Thursday from 8:30 to 13:30 and 15:30 a 18:30. Friday from 8:30 to 13:30

Send a message

Your Account

Create customer account
Create Business Account

Follow us in our social

BASIC INFORMATION ON DATA PROTECTION

This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.

More information Customize cookies

Functional cookies

Yes

Description and cookies

Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.


PHP_SESSID	adajusa.es	The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser.	Session
PrestaShop-#	adajusa.es	This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop.	480 hours
rc::a	Google	It is used to read and filter bot requests.	Persistent
rc::c	Google	It is used to read and filter bot requests.	Persistent

Advertising Cookies

Yes

Description and cookies

These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.


ads/ga-audiences	Google	These cookies are used by Google AdWords to re-engage visitors that are likely to convert to customers based on the visitor’s online behaviour across websites.	Session

Analytics cookies

Yes

Description and cookies

Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.


_ga	Google	Registers a unique ID that is used to generate statistical data on how the visitor uses the website.	2 years
_gat	Google	Used by Google Analytics to throttle request rate	1 day
_gat_gtag_UA_#	Google	Used to throttle request rate.	1 minute
_gd#	Google	This is a Google Analytics Session cookie used to generate statistical data on how you use the website which is removed when you quit your browser.	Session
_gid	Google	Registers a unique ID that is used to generate statistical data on how the visitor uses the website.	1 day

Performance cookies

Yes

Description

These are used to improve the browsing experience and optimize the operation of the shop.

Other cookies

Yes

Description

These are cookies without a clear purpose or those that we are still in the process of classifying.

Cap adapter for motor shaft or reducer from 24mm to 28mm

Questions

Question about the product

16 other products in the same category:

Double output axle T-40 x 18

Tensioning rails for electric motor size 100-112 rail length 395 mm

Tensioning base for electric motor size 132-B

FA output flange for gear unit size 130

Simple output axle T-50 25

FA output flange for gearbox size 110

Tensioning rails for electric motor size 80-90 rail length 312 mm

Simple axis output T-30 14

Simple axis of output T-25 11

Tensioning base for electric motor size 63 to 80

Simple output axle T-75 28

FA output flange for reducer size 40

Tensioning rails for electric motor size 80-90 rail length 395mm

Cap adapter for motor shaft or reducer from 11mm to 14mm

Cap 19mm to 24mm drive shaft or gearbox adapter

Tensioning rails for electric motor size 160-180 rail length 630mm

Home

Client support

Company information

Your Account

Follow us in our social

Newsletter