Manual tube deburrer

Manual tube deburrer

Manual tube deburrer

€25.25 Tax included

€20.87 tax excl.

Manual deburrer for tubes, allows you to remove possible burrs and chamfer the internal edge of the tube after cutting, leaving the surface smooth and polished for later use.

Reference: R230.000.007

Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

No queries yet, leave the first!

Description
Frequently questions

Tool for manual deburring of tubes, allows you to remove burrs and internally chamfer the tube after cutting it. Small element for comfortable grip and one-handed operation.

It is essential to remove any burrs from the edge of the tube after cutting it, to protect and not damage the fitting joints during insertion.

Material for professional use, install in compliance with the regulations in force at the installation site.

Questions

Be the first to ask a question about this product!

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

Responsible: ADAJUSA (CONSTRUCCIONES PBR, S.L.), purpose: Respond to requests for information, legitimacy: consent of the interested party, recipients: data will not be communicated to third parties, rights: Access, rectify and delete data, as well as other rights, as explained in the additional information. (read)

16 other products in the same category:

Centering tool for 40mm...

Flanges and branches for downpipes for compressed air installations

Centering tool for 40mm tube drill - Aignep

€34.10 (€28.18 tax excl.)

Tool or centering element for drilling holes in a 40mm outer diameter tube. This element allows the correct drilling of the tube to be carried out quickly, easily and centered on the desired point of the tube, for the subsequent placement of a flange for downspout or bypass flange for the 90247 series of the Aignep brand. Reference: 90249 40...

Centering tool for 63mm...

Flanges and branches for downpipes for compressed air installations

Centering tool for 63mm tube drill - Aignep

€51.10 (€42.23 tax excl.)

Tool or centering element for drilling holes in a 63mm outer diameter tube. This element allows the correct drilling of the tube to be carried out quickly, easily and centered on the desired point of the tube, for the subsequent placement of a flange for downspout or bypass flange for the 90247 series of the Aignep brand. Reference: 90249 63...

Centering tool for 50mm...

Flanges and branches for downpipes for compressed air installations

Centering tool for 50mm tube drill - Aignep

€47.88 (€39.57 tax excl.)

Tool or centering element for drilling holes in a 50mm outer diameter tube. This element allows the correct drilling of the tube to be carried out quickly, easily and centered on the desired point of the tube, for the subsequent placement of a flange for downspout or bypass flange of the 90240 and 90246 series from the Aignep brand. Reference: 90242 50...

Wrench for tightening nuts...

Supplies and tools

Wrench for tightening nuts diameter 63mm

€22.35 (€18.47 tax excl.)

Wrench for tightening the nuts of the fittings used on 63mm diameter tubes. Its design allows for quick and easy handling without effort; Ergonomic design for comfortable grip. Reference: R235.063.000 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Wrench for tightening nuts...

Supplies and tools

Wrench for tightening nuts diameter 32mm

€17.63 (€14.57 tax excl.)

Wrench for tightening the nuts of the fittings used on 32mm diameter tubes. Its design allows for quick and easy handling without effort; Ergonomic design for comfortable grip. Reference: R235.032.000 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Centering tool for 25mm...

Flanges and branches for downpipes for compressed air installations

Centering tool for 25mm tube drill - Aignep

€33.58 (€27.75 tax excl.)

Tool or centering element for drilling holes in a 25mm outer diameter tube. This element allows the correct drilling of the tube to be carried out quickly, easily and centered on the desired point of the tube, for the subsequent placement of a flange for downspout or bypass flange for the 90247 series of the Aignep brand. Reference: 90249 25...

Drill bit diameter 25mm

Supplies and tools

Drill bit diameter 25mm

€55.94 (€46.23 tax excl.)

Milling cutter for drilling aluminum tubes, allows you to make 25mm diameter drills. Reference: 9024100003 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Drilling tool diameter 25-63mm

Supplies and tools

Drilling tool diameter 25-63mm

€542.46 (€448.31 tax excl.)

Tool for drilling aluminum tubes, allows you to make drills with diameters of 25, 32, 40, 50 and 63mm. Its design allows for quick and easy handling without effort; Ergonomic design for comfortable grip. Reference: 90252 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Wrench for tightening nuts...

Supplies and tools

Wrench for tightening nuts diameter 20mm

€14.62 (€12.08 tax excl.)

Wrench for tightening the nuts of the fittings used on 20mm diameter tubes. Its design allows for quick and easy handling without effort; Ergonomic design for comfortable grip. Reference: R235.020.000 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Centering tool for 50mm...

Flanges and branches for downpipes for compressed air installations

Centering tool for 50mm tube drill - Aignep

€49.01 (€40.50 tax excl.)

Tool or centering element for drilling holes in a 50mm outer diameter tube. This element allows the correct drilling of the tube to be carried out quickly, easily and centered on the desired point of the tube, for the subsequent placement of a flange for downspout or bypass flange for the 90247 series of the Aignep brand. Reference: 90249 50...

Drill bit for diameters 32,...

Supplies and tools

Drill bit for diameters 32, 40, 80,110mm

€76.19 (€62.97 tax excl.)

Milling cutter for drilling aluminum tubes, allows you to make drills with diameters of 32, 40, 80 and 110 mm. Reference: 9024100001 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Centering tool for 32mm...

Flanges and branches for downpipes for compressed air installations

Centering tool for 32mm tube drill - Aignep

€33.58 (€27.75 tax excl.)

Tool or centering element for drilling holes in a 32mm outer diameter tube. This element allows the correct drilling of the tube to be carried out quickly, easily and centered on the desired point of the tube, for the subsequent placement of a flange for downspout or bypass flange of the 90240 and 90246 series from the Aignep brand. Reference: 90242 32...

Centering tool for 32mm...

Flanges and branches for downpipes for compressed air installations

Centering tool for 32mm tube drill - Aignep

€34.04 (€28.13 tax excl.)

Tool or centering element for drilling holes in a 32mm outer diameter tube. This element allows the correct drilling of the tube to be carried out quickly, easily and centered on the desired point of the tube, for the subsequent placement of a flange for downspout or bypass flange for the 90247 series of the Aignep brand. Reference: 90249 32...

Pipe cutter diameter 50-110mm

Supplies and tools

Pipe cutter diameter 50-110mm

€362.00 (€299.17 tax excl.)

Tool for cutting pipes with a diameter between 50 and 110mm. Allows adjustment to the desired diameter for quick, easy and precise cutting without effort; Design with ergonomic knob for comfortable grip and handling. Reference: 90870 50-110 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Disassembly wrench 20-63mm

Supplies and tools

Disassembly wrench 20-63mm

€170.60 (€140.99 tax excl.)

Adjustable wrench for disassembling fittings used on tubes with a diameter between 20 and 63mm. Its design allows for quick and easy handling without effort; Ergonomic design for comfortable grip. Reference: 90885 20 63 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Wrench for tightening nuts...

Supplies and tools

Wrench for tightening nuts diameter 25mm

€14.62 (€12.08 tax excl.)

Wrench for tightening the nuts of the fittings used on 25mm diameter tubes. Its design allows for quick and easy handling without effort; Ergonomic design for comfortable grip. Reference: R235.025.000 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Home

Product added to wishlist