simple direction thrust ball bearing with flat housing ring 51405 , dimensions 25x60x24mm, inner diameter 25mm, outer diameter 60mm, width 24 mm. These bearings consist of shaft rings, housing rings and ball cage assembly. The bearings are not self-retaining and for this reason the ball cage and bearing rings can be mounted separately, they are particularly suitable for supporting axial loads in one direction only. Thrust ball bearings with flat housing ring do not permit angular errors or inclined positions between the shaft and housing rings.
The main dimensions for simple direction thrust bearings correspond to ISO 104/DIN 711. The dimensional and shape tolerances correspond to tolerance class PN, according to DIN 620-3.
Axial ball bearings can be used for operating temperatures from –30 °C to +150 °C limited by lubricant.
Characteristics:
- Manufacturer/Distributor: FAG
- Reference: 51405 FAG
- Material: Steel
- Dynamic load capacity, axial (Cr) : 45500N
- Static load capacity, axial (Cor) : 67000N
- Fatigue load limit, axial (Cur) : 2950N
- Limiting rotation speed (nG): 4500 1/min
- Weight: 0.295 Kg
Dimensions:- Hole diameter (d): 25mm
- Outer diameter (D): 60mm
- Width, overall (T): 24mm
- Housing ring hole diameter (D1): 27mm
- Shaft ring lip diameter (d1): 60mm
- Minimum chamfer measurements (r): 1mm
Professional use material, install in compliance with the regulations in force at the installation site.
For further information you can download the technical sheet by clicking on the "Attached Files" tab.
English 
Español
Português PT
Adajusa FRANCE
Adajusa ITALY
