Limit switch 3/2 NC pneumatic strut 3/2 NC side...

Limit switch 3/2 NC pneumatic strut 3/2 NC side fittings diameter 4 mm- Aignep

Limit switch 3/2 NC pneumatic strut 3/2 NC side fittings diameter 4 mm- Aignep

€15.19 Tax included

€12.55 tax excl.

Limit switch pneumatic strut pneumatic 3 way and 2 positions, monostable, normally closed (NC) and fittings located on the side for tube outer diameter of 4 mm. Prepared for mounting with emergency pushbutton or similar.

Series: 02V
Part no.: 02VG03NCX1

NORMATIVAMICROVALVULA

Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

No queries yet, leave the first!

Description
Frequently questions

Limit switch pneumatic strut, with quick-connect fittings on the side for 4 mm outer diameter tubing. The valve's idle state of the limit switch is normally closed (NC), i.e. when not pressed there is no air present at the outlet as air cannot pass through and when actuated it lets air pass through and there is pneumatic pressure at the outlet.

Manufacturer: Aignep

Part number: 02VG03NCX1
Valve body: anodized aluminum
Spring material: stainless steel
Seals: NBR
Fittings: quick couplings for pipe diameter 4 mm side connection.
Operating pressure: 2 ÷ 10
Operating temperature °C: -10 ÷ +60 °C
Flow rate at 6 bar ΔP 1 bar Nl/min: 100

02VG03NCB5

Equipment for professional use, to be installed in compliance with the regulations in force at the place of installation.

Questions

Be the first to ask a question about this product!

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

Responsible: ADAJUSA (CONSTRUCCIONES PBR, S.L.), purpose: Respond to requests for information, legitimacy: consent of the interested party, recipients: data will not be communicated to third parties, rights: Access, rectify and delete data, as well as other rights, as explained in the additional information. (read)

You might also like

Pushbutton for pneumatic valve - Metal Work - adajusa.es

Pushbuttons and pneumatic actuators

Pushbutton for pneumatic valve - Metal Work

€10.59 (€8.75 tax excl.)

Monostable protected pushbutton with red and black discReference: W0351000011 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pneumatic emergency...

Pushbuttons and pneumatic actuators

Pneumatic emergency mushroom-head button - Metal Work

€24.85 (€20.54 tax excl.)

Pneumatic emergency stop button, drill diameter 22.5mm. With valve adapter.Reference: W0351000014 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pneumatic limit switch 1/8...

Pneumatic Limit switchs

Pneumatic limit switch 1/8 5/2 for panel actuators - Metal Work

€52.77 (€43.61 tax excl.)

limit switch pneumatic valve 1/8 5/2 for mounting with emergency pushbutton or similar Reference: 7010001900 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Limit Switch 1/8 5-way...

Pneumatic Limit switchs

Limit Switch 1/8 5-way servo-piloted antenna - Metal Work

€67.30 (€55.62 tax excl.)

limit switch pneumaticvalve, mechanically operated pneumatic valve, 1/8 5-way. The limit switch is driven by a sensitive antenna. Reference: 7001000710 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Individual adapter for...

Pushbuttons and pneumatic actuators

Individual adapter for pushbutton or selector valve - Aignep

€1.85 (€1.53 tax excl.)

Adapter to fit the following valves: 01VVV03NC02, 01VVV050002, 02VG03NCB5 and 02VG03NOB5 and on the pushbuttons - selector switches: 04V0100001, 04V0200N01, 04V0200R01, 04V0200R02, 04V030001, 04V030002, 04V030003, 04V0400N01, 04V0400N02, 04V0400N03, 04V0400N04, 04V0500N01, 04V0500N02, 04V0500N03 and 04V0500N04 Series: 04VOrdering number: 04V0600001...

Double adapter for push...

Pushbuttons and pneumatic actuators

Double adapter for push button valve or selector valve - Aignep

€1.85 (€1.53 tax excl.)

Adapter to fit the following valves: 01VVV03NC02, 01VVV050002, 02VG03NCB5 and 02VG03NOB5 and on the pushbuttons - selector switches: 04V0100001, 04V0200N01, 04V0200R01, 04V0200R02, 04V030001, 04V030002, 04V030003, 04V0400N01, 04V0400N02, 04V0400N03, 04V0400N04, 04V0500N01, 04V0500N02, 04V0500N03 and 04V0500N04 Series: 04VOrdering number: 04V0600002...

16 other products in the same category:

Limit switch long roller...

Pneumatic Limit switchs

Limit switch long roller pneumatic 1/8 3/2 NC monostable with spring return - Aignep

€29.39 (€24.29 tax excl.)

Limit switch pneumatic 1/8 3 way and 2 positions, for mounting with emergency push button or similar. The limit switch is operated by means of a lever with roller. Series: 03VPart number: 03VZ03NC02 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Limit Switch 1/8 3/2...

Pneumatic Limit switchs

Limit Switch 1/8 3/2 one-way roller lever - Metal Work

€37.41 (€30.92 tax excl.)

limit switch pneumaticvalve, mechanically operated pneumatic valve, 1/8 3-way thread. The limit switch is unidirectional drive by lever with roller. Reference: 7001000600 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Limit Switch pneumatic...

Limit Switch pneumatic... 2

Pneumatic Limit switchs

Limit Switch pneumatic roller 3/2 NO side fittings diameter 4 - Metal Work

€22.77 (€18.82 tax excl.)

Limit Switch pneumatic with roller drive, fittings located on the side, for outer diameter tube of 4 mm. The valve type of the limit switch is normally open (NA). Reference: W3501001200 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Limit Switch tyre cams 1...

Pneumatic Limit switchs

Limit Switch tyre cams 1 direction 1/8 3/2 NC - Mindman

€24.93 (€20.60 tax excl.)

Limit Switch pneumatic,cam 1 direction, mechanically operated pneumatic valve, 1/8 3-way thread normally closed (NC). The limit switch is driven by a button with a metal roller.Reference: 281EPA106 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Limit Switch cam tire with...

Pneumatic Limit switchs

Limit Switch cam tire with roller 1/8 3/2 NC - Mindman

€20.63 (€17.05 tax excl.)

Limit Switch pneumatic cam with roller,mechanically operated pneumatic valve with cam with metal roller, thread 1/8 3 ways normally closed (NC).Reference: EPA-105 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Limit switch 1/8 5/2 strut...

Pneumatic Limit switchs

Limit switch 1/8 5/2 strut pneumatic - monostable with spring-return - Aignep

€26.52 (€21.92 tax excl.)

Limit switch pneumatic of 1/8 5 way and 2 positions, for mounting with emergency push button or similar. Actuated by spring return mechanical strut. Series: 03VReference: 03VG050002 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Limit Switch tyre 3/2 NC...

Pneumatic Limit switchs

Limit Switch tyre 3/2 NC one-way cam diameter M5 rear fittings - Metal Work

€21.02 (€17.37 tax excl.)

Limit Switch tire with unidirectional cam drive, fittings located at the rear, for M5 outer diameter tube. The valve type of the limit switch is normally closed (NC). Reference: W3501000311 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Limit Switch pneumatic...

Pneumatic Limit switchs

Limit Switch pneumatic roller 3/2 NC side fittings diameter M5 - Metal Work

€20.67 (€17.08 tax excl.)

Limit Switch pneumatic with roller drive, fittings located on the side, for 5M outer diameter tube. The valve type of the limit switch is normally closed (NC). Reference: W3501001211 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Limit Switch 1/8 5-way tyre - Metal Work - adajusa.es

Pneumatic Limit switchs

Limit Switch 1/8 5-way strut tyre - Metal Work

€29.05 (€24.01 tax excl.)

limit switch pneumatic drive with pushbutton drive, 1/8" 5-way mechanical drive. Drive by mechanical strut spring return. Reference: MEV 25 TAS OO - 7001000110 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

1/8-3/2 NC pneumatic end - Mindman

1/8-3/2 NC pneumatic end - Mindman 2

Pneumatic Limit switchs

Limit Switch tyre 1/8 3/2 NC - Mindman

€18.51 (€15.30 tax excl.)

Limit Switch pneumaticvalve, mechanically operated pneumatic valve, 1/8 3-way normally closed (NC) thread. The limit switch is driven by front piston.Reference: 281EPA100 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Limit Switch tyre 3/2 NO...

Limit Switch tyre 3/2 NO... 2

Pneumatic Limit switchs

Limit Switch tyre 3/2 NO rear fittings diameter M5 - Metal Work

€18.11 (€14.97 tax excl.)

Limit Switch pneumatic (mini-valve) with push-button drive, fittings located at the rear for M5 outer diameter tube. The valve type of the limit switch is normally open (NO).Reference: W3501000110 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Limit Switch tire piston NC...

Pneumatic Limit switchs

Limit Switch tire piston NC 3/2 diameter 4 - Metal Work

€19.21 (€15.88 tax excl.)

Limit Switch pneumatic,fittings located on the side, for tube outer diameter of 4 mm. The valve type of the limit switch is normally closed (NC). Reference: W3501001401 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Limit Switch tyre 3/2 NO...

Pneumatic Limit switchs

Limit Switch tyre 3/2 NO side fittings diameter M5 - Metal Work

€19.24 (€15.90 tax excl.)

limit switch pneumatic with pushbutton drive, fittings located on the side for M5 outer diameter tube. The valve type of the limit switch is normally open (NA). Reference: W3501001110 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Limit Switch tire piston NC...

Pneumatic Limit switchs

Limit Switch tire piston NC 3/2 diameter M5 - Metal Work

€18.79 (€15.53 tax excl.)

Limit Switch pneumatic,fittings located on the side, for tube outer diameter of M5. The valve type of the limit switch is normally closed (NC). Reference: W3501001411 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Limit switch pneumatic...

Limit switch pneumatic... 2

Pneumatic Limit switchs

Limit switch pneumatic roller 3/2 NC diameter 4 side fittings - Metal Work

€21.13 (€17.46 tax excl.)

Limit Switch pneumatic with roller drive, fittings located on the side, for outer diameter tube of 4 mm. The valve type of the limit switch is normally closed (NC). Reference: W3501001201 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Limit Switch Metal Work roller lever - ADAJUSA

Limit Switch Metal Work roller lever - ADAJUSA 2

Pneumatic Limit switchs

Limit Switch 1/8 5/2 lever roller - Metal Work

€40.10 (€33.14 tax excl.)

limit switch pneumaticvalve, mechanically operated pneumatic valve, 1/8 5-way thread. The limit switch is driven by a roller lever.Reference: 7001000510 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Customers who bought this product also bought:

1/4-way female cutting microvalve - Metal Work - ADAJUSA

1/4-way female cutting microvalve - Metal Work - ADAJUSA 2

Cutting and unloading valves

Solenoid valve 1/4-way female cutting - Metal Work

€5.09 (€4.21 tax excl.)

2-way female thread cutting microvalve, lever driven, for pneumatic applications.Reference: 810100101 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pneumatic logic valve function "Y"

Logic valves and special valves

Pneumatic logic valve function AND - Metal Work

€17.97 (€14.85 tax excl.)

Pneumatic logic valve function "AND" with built-in quick fittings for 4mm diameter tube. Reference: W3604000002 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Black polyamide M16 gland nut

Metric thread glands

Gland nut M16 Black polyamide

€0.06 (€0.05 tax excl.)

Nut for polyamide glands (Nylon) thread M16. Degree of protection IP-68. Color: Black (RAL9005).Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Earplug 4 plastic

Earplug 4 plastic 2

Plug (R9)

Plastic spike plug 4 - Metal Work

€0.35 (€0.29 tax excl.)

Spike cap inserted diameter 4mm in plastic. This plug allows to seal an outlet of a fitting or pneumatic element of diameter 4 to avoid the exit of pressurized air.Reference: 2L10001 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pneumatic dealers

5-way Collector , 6 and 4 with technopolymer fittings - Metal Work

€6.32 (€5.22 tax excl.)

Collector distributor with 2 fittings 6 and 3 fittings 4, made of technopolymer, for pneumatic applications. Representative image for illustrative purposes, the article supplied shall correspond to the specifications indicated.

Valve 1/8 5 bistable vias - Metal Work - ADAJUSA

Valve 1/8 5 bistable vias - Metal Work - ADAJUSA 2

Pneumatic valves 1/8

Pneumatic valve 1/8 5/2 bistable - Metal Work

€40.63 (€33.58 tax excl.)

Pneumatic valve 1/8 5 ways 2 bistable positions. Reference: 7010011200 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Pneumatic cylinder 16x50...

Pneumatic Cylinders

Pneumatic cylinder 16x50 single-acting MB0160050 - Aignep

€31.51 (€26.04 tax excl.)

Pneumatic cylinder Ø16 stroke 50mm, single acting magnetic. Made in Italy according to ISO 6432 standard, prepared for magnetic detectors, chrome plated steel piston rod. ATEX cylinders as standard.Reference: MB0160050 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated .

View

Metal 1/4 filtration group with pressure gauge - Mindman

Filter groups of 1/4 FR-L

Filter group 1/4 metal with pressure gauge - Mindman

€46.45 (€38.39 tax excl.)

Filter group 1/4 seire 200 (Filter-regulator + lubricator) metal and plastic cups, with pressure gauge diameter 40 and metal fixing bracket. Reference: 281MACP200L08ABBAR Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pneumatic logic valve function O Metal Work - ADAJUSA

Pneumatic logic valve function O Metal Work - ADAJUSA 2

Logic valves and special valves

Pneumatic logic valve function OR - Metal Work

€16.49 (€13.63 tax excl.)

Pneumatic logic valve function "OR" with built-in quick fittings for 4mm diameter tube.Reference: W3604000001 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Limit Switch lever roller...

Limit Switch lever roller... 2

Pneumatic Limit switchs

Limit Switch lever roller 3/2 NC diameter 4 rear fittings - Metal Work

€19.65 (€16.24 tax excl.)

limit switch lever-operated tire with roller, fittings (axial connections) located at the rear for 4 mm outer diameter tube. The valve type of the limit switch is normally closed (NC). Reference: W3501000200 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Home

Product added to wishlist