115x200mm ventilation grille for TFE Series...
115x200mm ventilation grille for TFE Series cabinets

115x200mm ventilation grille for TFE Series cabinets

€2.72 Tax included

€2.25 tax excl.

Metal ventilation grille for TFE series cabinets. It allows the dissipation of the heat generated inside the cabinets, guaranteeing adequate and optimal operating conditions.

Grid dimensions 115x200mm. Protection grade IP43


Reference: TFE-SZ3


Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

No queries yet, leave the first!
Privacy
Shipments
Returns
 

Ventilation grille for TFE series metal cabinets. Exterior dimensions of the grille 115x200mm.

It allows the heat generated by the equipment installed inside the cabinets to be dissipated, thus guaranteeing adequate and optimal operating conditions. The degree of ventilation can be controlled depending on the size of the installed grille. It is fixed to the cabinet using screws, after placing the sealing gasket cut to size depending on the size of the ventilation hole.

The protection degree of the cabinet with the grille installed is IP43.

Characteristics:

  • Manufacturer/Supplier: Tracon
  • Reference: TFE-SZ3
  • Exterior dimensions: 115x200mm
  • Cutting dimensions: 50x160mm
  • Color: Gray RAL7035
  • Protection grade: IP43



Material for professional use, install in compliance with the regulations in force at the installation site.

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

16 other products in the same category:

Heating resistors PTC GHT 150-B
Metal cabinets and envelopes

Heating resistance for electrical cabinets 150W, 120-240V AC/DC

Generico-GAE
GHT150-B
€42.24 (€34.91 tax excl.)
Heating resistance of 150W suitable for the regulation and control of temperature and humidity inside cabinets and electrical panels.Quick connection by pressure terminals and clip mounting in din-rail. PTC resistance with temperature limiter. Reference: GHT150-B Representative image for illustrative purposes, the item supplied will correspond to the...
Heating resistors PTC GHT 030-B
Metal cabinets and envelopes

Heating resistance for electrical cabinets 30W, 120-240V AC/DC

Generico-GAE
GHT030-B
1 review
€22.24 (€18.38 tax excl.)
Heating resistance of 30W suitable for the regulation and control of temperature and humidity inside cabinets and electrical panels.Quick connection by pressure terminals and clip mounting in din-rail. PTC resistance with temperature limiter. Reference: GHT030-B Representative image for illustrative purposes, the item supplied will correspond to the...
Chassis 60 modules 3 rows 700x500 Sheet metal - ASJD Chassis 60 modules 3 rows 700x500 Sheet metal - ASJD 2
  • -25%
Metal cabinets and envelopes

Chassis 60 modules 3 rows 700x500 Sheet metal

Tibox
500CHARM07050
€69.09 (€57.10 tax excl.) €92.12
Front chassis for sheet metal distribution cabinets. Front panel of 60 modules in 3 rows, used to divide and provide insulation of the front of the cabinets. Cabinet dimensions: 700x500mm. (cabinet not included). Minimum cabinet background: 250mm. Number of modules: 60 (3x20). Note: The cabinet is not included in the supply, it must be purchased...
Cable gland plate with 51...
Metal cabinets and envelopes

Cable gland plate with 51 entries 222x92mm for TFE Series electrical cabinets

TRACON
EKBV-05
€19.07 (€15.76 tax excl.)
Cable gland plate with 51 entries for TFE series metal cabinets. This element is located at the top of the cabinet allowing the entry of several cables or electrical hoses of different diameters. Metal reinforced plate. The cable gland has 51 entries: 50 x 7...13mm, 1 x 15...25mm, Exterior dimensions of the plate 222x92mm. IP54 protection grade....
2
Metal cabinets and envelopes

Electrical Cabinet 500x400x200 mm with front chassis TFE Series

TRACON
TFE504020M
€138.93 (€114.82 tax excl.)
Sheet metal wall-mounted electrical Cabinet (envelope) with front chassis of 48 modules (3 rows with 16 modules each). Cabinet designed for electrical distribution panels, machinery cabinets, automation and control cabinets, air conditioning and air conditioning, etc. The door opening direction can be changed. IP55 protection grade. Supply includes:...
Home
Reviews
Product added to wishlist
Product added to compare.