Cap 9mm to 11mm drive shaft or reducer adapter

Cap 9mm to 11mm drive shaft or reducer adapter

Cap 9mm to 11mm drive shaft or reducer adapter

€7.02 Tax included

€5.80 tax excl.

Cap 9/11 adapter for motor or gearbox shaft, inner diameter 9mm and outer diameter 11mm. Made of steel, this adapter bushing allows to increase the diameter of a motor shaft to adapt it to the input of a gearbox or any other application.

Reference: 9/11

Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

No queries yet, leave the first!

Description
Frequently questions

Cap adapter with inner diameter 9mm and outer diameter 11mm. Allows to adapt the output shaft of a motor to the input shaft of a gearbox or any other type of application.

Made of ground steel.
The supply includes the key for the bushing.

Technical specifications

Part number: 9/11
Material: Steel
Finish: ground
Inside diameter: 9mm
Outside diameter: 11mm
Key: included

Material for professional use, must be installed in compliance with the regulations in force at the place of installation.

Questions

Be the first to ask a question about this product!

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

Responsible: ADAJUSA (CONSTRUCCIONES PBR, S.L.), purpose: Respond to requests for information, legitimacy: consent of the interested party, recipients: data will not be communicated to third parties, rights: Access, rectify and delete data, as well as other rights, as explained in the additional information. (read)

16 other products in the same category:

Gearbox accessories

FC output flange for size 90 reducer

€25.17 (€20.80 tax excl.)

FC-90 type output flange for size 90 worm gear reducers. This flange allows for lateral coupling in a very simple and compact way. Reference: FC-90 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Tensioning rails for...

Tensioning rails for... 2

Tensioning guides for electric motors

Tensioning rails for electric motor size 132 rail length 530mm

€149.52 (€123.57 tax excl.)

Tensioning rails for electric motors with housing size 132. They allow the displacement of the motors while maintaining their alignment at all times. Simple mechanism and easy installation. Rail length 495mm. Delivery includes 2 pieces: two shaft guides each with two sliding fixing blocks.Reference: LMGT530/10Representative image for illustrative...

Simple output axle T-25 x 11

Gearbox accessories

Simple axis of output T-25 11

€6.97 (€5.76 tax excl.)

Simple shaft of output type T-25 of Ø11mm., for reducers worm gear crown size 25. Made of rectified steel. Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Tensioning rails for...

Tensioning rails for... 2

Tensioning guides for electric motors

Tensioning rails for electric motor size 80-90 rail length 375mm

€65.96 (€54.51 tax excl.)

Tensioning rails for electric motors with housing sizes 80 and 90. They allow the displacement of the motors while maintaining their alignment at all times. Simple mechanism and easy installation. Rail length 375mm. Delivery includes 2 pieces: two shaft guides each with two sliding fixing blocks.Reference: LMGT375/8Representative image for illustrative...

Double output axle T-50 x 25

Gearbox accessories

Double output axle T-50 s25

€13.24 (€10.94 tax excl.)

Double output shaft type T-50 of 25mm., for auger reducers crown size 50. Made of rectified steel. Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Double output axle T-25 x 11

Gearbox accessories

Double output axle T-25 x 11

€6.93 (€5.73 tax excl.)

Double output shaft type T-25 of 11mm., for auger reducers crown size 25. Made of rectified steel. Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

PAM flange for worm gear...

Gearbox accessories

PAM flange for worm gear reducer size 130

€51.61 (€42.65 tax excl.)

PAM flange for size 130 worm gear reducer. This flange is made of aluminum. These flanges are available to couple motors with either a B5 or B14 flange . Available flange sizes are: Size 80 (diameter 200) B5 Size 80 (diameter 120) B14 Size 90 (diameter 200) B5 Size 90 (diameter 140) B14 Size 100/112 (diameter 250) B5 Size 100/112 (diameter 160) B14 Size...

Tensioning rails for...

Tensioning rails for... 2

Tensioning guides for electric motors

Tensioning rails for electric motor size 100-112 rail length 395 mm

€90.99 (€75.20 tax excl.)

Tensioning rails for electric motors with housing sizes 100 and 112. They allow the displacement of the motors while maintaining their alignment at all times. Simple mechanism and easy installation. Rail length 395mm.Delivery includes 2 pieces: two shaft guides each with two sliding fixing blocks.Reference: LMGT395/10Representative image for illustrative...

Tensioning rails for...

Tensioning rails for... 2

Tensioning guides for electric motors

Tensioning rails for electric motor size 80-90 rail length 312 mm

€60.38 (€49.90 tax excl.)

Tensioning rails for electric motors with housing sizes 80 and 90. They allow the displacement of the motors while maintaining their alignment at all times. Simple mechanism and easy installation. Rail length 312mm. Delivery includes 2 pieces: two shaft guides each with two sliding fixing blocks . Reference: LMGT312/8Representative image for illustrative...

Simple output axle T-63 x 25

Gearbox accessories

Simple output axle T-63 25

€16.77 (€13.86 tax excl.)

Simple output shaft type T-63 of 25mm., for auger reducers crown size 63. Made of rectified steel. Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Gearbox accessories

FB output flange for reducer size 50

€10.89 (€9.00 tax excl.)

Output flange type FB-50 for worm gearboxes size 50. This flange allows a lateral coupling in a very compact way simple. Part No.: FB-50Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Double output axle T-40 x 18

Gearbox accessories

Double output axle T-40 x 18

€11.27 (€9.31 tax excl.)

Double shaft of output type T-40 of Ø18mm., for reducers worm gear crown size 40. Made of rectified steel. Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Cap adapter for motor shaft...

Gearbox accessories

Cap adapter for motor shaft or reducer from 11mm to 14mm

€7.97 (€6.59 tax excl.)

Cap 11/14 adapter for motor or gearbox shaft, inner diameter 11mm and outer diameter 14mm. Made of steel, this adapter bushing allows to increase the diameter of a motor shaft to adapt it to the input of a gearbox or any other application.Reference: 11/14Representative image for illustrative purposes, the item supplied will correspond to the...

Cap adapter for motor shaft...

Gearbox accessories

Cap adapter for motor shaft or reducer from 28mm to 38mm

€20.97 (€17.33 tax excl.)

Cap 28/38 adapter for motor or gearbox shaft, inside diameter 28mm and outside diameter 38mm. Made of steel, this adapter bushing allows to increase the diameter of a motor shaft to adapt it to the input of a gearbox or any other application.Reference: 28/38Representative image for illustrative purposes, the item supplied will correspond to the...

Gearbox accessories

FA output flange for reducer size 50

€9.21 (€7.61 tax excl.)

Output flange type FA-50 for wormgearboxes size 50. This flange allows a lateral coupling in a very compact way simple. Part No.: FA-50Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Tensioning base for...

Tensioning base for... 2

Bases tensoras para motores eléctricos

Tensioning base for electric motor size 160

€96.61 (€79.84 tax excl.)

Tensioning base for electric motors with housing size 160. Allows adjustment and regulation of belt tensioning and alignment without disassembling the motor. Adjustable plate displacement by means of standard screw. Part No.: LMBTSMA450Picture representative for illustrative purposes, the item supplied will correspond to the specifications indicated.

Customers who bought this product also bought:

Crown Endless Reducer Size 25 Flange PAM 80/9 - Motor housing 56 B14

Crown Endless Reducer Size 25 Flange PAM 80/9 - Motor housing 56 B14 2

Endless crown reducers

Crown Endless Reducer Size 25 Flange PAM 80/9 - Motor housing 56 B14

€58.59 (€48.42 tax excl.)

With hollow outlet shaft diameter 11mm, and PAM 80/9 inlet flange (Ext diameter 80mm and diameter 9mm inlet shaft) type B14, suitable for motors with size 56 housing. Reduction ratios available: 10-15-20-30-40-50-60. Usual motor powers for these reducers are 0.08hp, 0.12hp and 0.16hp reduced housing (maximum recommended ratio I = 25) 1500 rpm....

LS15GW-B short sheave lever limit switch (microswitch) | LS15GW-B | LS15GW-B Adajusa

LS15GW-B short sheave lever limit switch (microswitch) | LS15GW-B | LS15GW-B Adajusa 2

Electric Race Finals (Microswitches)

Limit switch short roller lever (microswitch microswitch) LS15 Series

€4.92 (€4.07 tax excl.)

Short lever actuated limit switch with pulley, (microswitch microswitch), 1 CO (NO/NC). High load capacity. Part No.: LS15GW22-B Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Full 25A star-triangle switch - Giovenzana

Pack

Inverter switches, star-delta

Star-triangle switch 25A (15hp) - Giovenzana

€57.97 (€47.91 tax excl.)

Star-triangle starter switch 25A electric motors. It allows the start and stop of a three-phase electric motor in star-triangle mode, to reduce the initial consumption tip during start-up. Engine power 15hp (10Kw) with voltage 400Vac. Reference: GICO2500-15R Representative image for illustrative purposes, the article supplied will correspond to the...

Gearbox accessories

FA output flange for reducer size 40

€8.40 (€6.94 tax excl.)

Output flange type FA-40 for wormgearboxes size 40. This flange allows a lateral coupling in a very compact way simple. Part number: FA-40Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Simple output axle T-30 x 14

Gearbox accessories

Simple axis output T-30 14

€10.06 (€8.31 tax excl.)

Simple output shaft type T-30 of 14mm., for auger reducers crown size 30. Made of rectified steel. Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Simple ISO roller chain union - ADAJUSA

Simple ISO roller chain union - ADAJUSA 2

Roller chains European standard ISO DIN 8187

Simple roller chain union 10B-1 ISO

€0.65 (€0.54 tax excl.)

Roller chain joining links for simple chain type 10B according to ISO standardReference: 57360025 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Cap 19mm to 24mm drive...

Gearbox accessories

Cap 19mm to 24mm drive shaft or gearbox adapter

€11.18 (€9.24 tax excl.)

Cap 19/24 adapter for motor or gearbox shaft, inner diameter 19mm and outer diameter 24mm. Made of steel, this adapter bushing allows to increase the diameter of a motor shaft to adapt it to the input of a gearbox or any other application.Reference: 19/24Representative image for illustrative purposes, the item supplied will correspond to the...

Cap adapter for motor shaft...

Gearbox accessories

Cap adapter for motor shaft or reducer from 11mm to 14mm

€7.97 (€6.59 tax excl.)

Cap 11/14 adapter for motor or gearbox shaft, inner diameter 11mm and outer diameter 14mm. Made of steel, this adapter bushing allows to increase the diameter of a motor shaft to adapt it to the input of a gearbox or any other application.Reference: 11/14Representative image for illustrative purposes, the item supplied will correspond to the...

Simple roller chain ISO DIN 8187 ISB - ADAJUSA

Roller chains European standard ISO DIN 8187

Single step roller chain 12.7 1/2 08B-1 DIN 8187

Starting from €6.40 (€5.29 tax excl.)

Simple roller chain standard according to European standard ISO DIN 8187, up to 98% performance (*), very light and compact which allows them to be installed in very limited spaces. Reference: 57250020 Step: 12.7- 1/2" Roller diameter: 8.51 mmPrice per meter. Sale exclusively by packaging of multiples of 5 meters. Representative image for...

View

Brackets and tensioners with bearings

Oval support with 12mm axle bearing UCFL201 - ISB

€7.39 (€6.11 tax excl.)

Oval cast iron support with UCFL201 inserted bearing for 12mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCFL201 ...

Home

Product added to wishlist