Spindles, nuts and precision supports

In this section you will find rolled trapezoidal spindles, trapezoidal nuts in bronze and steel for spindles, and fixed and floating supports for precision assembly

Trapezoidal screws

Trapezoidal nuts for spindles

Precision spindle supports

20x4 rolled trapezoidal spindle - HIWIN - ADAJUSA

Spindles, nuts and precision supports

Laminated trapezoidal spindle 20x4 C45 steel

RTS2004L

Starting from €26.49 (€21.89 tax excl.)

Laminated spindle diameter 20mm, pitch 4mm. Made of C45 steel Diameter: 20mm Pitch: 4mm Reference: RTS2004L Cutting the spindle to the desired size from 500 mm to 1,800 mm. Please indicate the length you want. Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

View

Spindles, nuts and precision supports

Laminated trapezoidal spindle 30x6 C45 steel

RTS3006L

Starting from €53.88 (€44.53 tax excl.)

Laminated spindle diameter 30mm, pitch 6mm. Made of C45 steel Diameter: 30mm Pitch: 6mm Reference: RTS3006L Cutting the spindle to the desired size from 500 mm to 1,800 mm. Please indicate the length you want. Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

View

Trapezoidal nuts for spindles

Hex nut SKM 20x4

NFSKM204

€9.41 (€7.78 tax excl.)

Hexagonal steel nut suitable for clamping operations, manual positioning and in combination with support screws.Diameter: 20 x 4Part No.: NFSKM204 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

View

Trapezoidal nuts for spindles

Left-hand hex nut SKM 20x4

NFSKM204I

€10.32 (€8.53 tax excl.)

Hexagonal steel nut with left-hand thread, suitable for clamping operations, manual positioning and in combination with support screws.Diameter: 20 x 4Part No.: NFSKM204IRepresentative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

View

Trapezoidal nuts for spindles

Hexagonal nut SKM 24x5

NFSKM245

€11.75 (€9.71 tax excl.)

Hexagonal steel nut suitable for clamping operations, manual positioning and in combination with support screws.Diameter: 24 x 5Part No.: NFSKM245 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

View

CS bronze cap trapezoidal nut - HIWIN - ADAJUSA

Trapezoidal nuts for spindles

Tuerca trapezoidal casquillo de bronce 20x4

CS4D

€22.61 (€18.69 tax excl.)

The trapezoidal nuts in bronze bushing are manufactured with special tools according to DIN 103, tolerance class H7. Diameter: 20x4 Reference: CS4D Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

View

Trapezoidal nuts for spindles

CS 30x6 bronze cap trapezoidal nut

CS6D

€48.05 (€39.71 tax excl.)

The trapezoidal nuts in bronze bushing are manufactured with special tools according to DIN 103, tolerance class H7. Diameter: 30x6 Reference: CS6D Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

View

Trapezoidal nuts for spindles

Bronze nut EFM 20x4

NFEFM204

€54.56 (€45.09 tax excl.)

Complete bronze nut Cu Sn5 Zn5 Pb5-C for motion transmissions in continuous operation, with particularly good usage characteristics. Diameter: 20 x 4Reference: NFEFM204Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

View

Trapezoidal nuts for spindles

Bronze nut left-hand EFM 20x4

NFEFM204I

€58.94 (€48.71 tax excl.)

Complete Cu Sn5 Zn5 Pb5-C bronze nut with left-hand thread, for motion transmissions in continuous operation, with particularly good usage characteristics. Diameter: 20 x 4Reference: NFEFM204IRepresentative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

View

Trapezoidal nuts for spindles

Bronze nut EFM 24x5

NFEFM245

€51.73 (€42.75 tax excl.)

Complete bronze nut Cu Sn5 Zn5 Pb5-C for motion transmissions in continuous operation, with particularly good usage characteristics. Diameter: 24 x 5Reference: NFEFM245Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

View

Trapezoidal nuts for spindles

Left-hand bronze nut EFM 24x5

NFEFM245I

€55.95 (€46.24 tax excl.)

Complete Cu Sn5 Zn5 Pb5-C bronze nut with left-hand thread, for motion transmissions in continuous operation, with particularly good usage characteristics. Diameter: 24 x 5Reference: NFEFM245IRepresentative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

View

Trapezoidal nuts for spindles

Bronze nut EFM 30x6

NFEFM306

€71.12 (€58.78 tax excl.)

Complete bronze nut Cu Sn5 Zn5 Pb5-C for motion transmissions in continuous operation, with particularly good usage characteristics. Diameter: 30 x 6Reference: NFEFM306Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

View

Precision supports

Fixed ball screw support BK 12 - Hiwin

BK12

€125.97 (€104.11 tax excl.)

Fixed support type BK 12 for ball screw. Designed to absorb the axial load of the spindle providing high rigidity and precision in the assembly. Consisting of two angular contact ball bearings and clamping nut. Assembled on the spindle on the motor side. Suitable for shafts with nominal diameter 14-18mm.The spindle end machining suitable for these BK...

View

Precision supports

Fixed ball screw support BK 15 - Hiwin

BK15

€135.06 (€111.62 tax excl.)

Fixed support type BK 15 for ball screw. Designed to absorb the axial load of the spindle providing high rigidity and precision in the assembly. Consisting of two angular contact ball bearings and clamping nut. Assembled on the spindle on the motor side. Suitable for shafts with a nominal diameter of 20mm.The spindle end machining suitable for these BK...

View

Precision supports

Fixed ball screw support BK 17 - Hiwin

BK17

€167.92 (€138.78 tax excl.)

Fixed support type BK 17 for ball screw. Designed to absorb the axial load of the spindle providing high rigidity and accuracy in the assembly. Consisting of two angular contact ball bearings and clamping nut. Assembled on the spindle on the motor side. Suitable for shafts with nominal diameter 25-28mm.The spindle end machining suitable for these BK fixed...

View

Nuts, washers and fixing sleeves

Fixed ball screw support BK 20 - Hiwin

BK20

€169.22 (€139.85 tax excl.)

Fixed support type BK 20 for ball screw. Designed to absorb the axial load of the spindle providing high rigidity and precision in the assembly. Consisting of two angular contact ball bearings and clamping nut. Assembled on the spindle on the motor side. Suitable for shafts with nominal diameter 25-28mm.The spindle end machining suitable for these fixed...

View

Precision supports

Floating ball screw support BF 12 - Hiwin

BF12

€52.14 (€43.09 tax excl.)

Floating support type BF 12 for ball screw. Consisting of bearing rigid ball and washer from retention, it provides high rigidity and accuracy in mounting. It is assembled on the spindle on the opposite side of the motor. Suitable for 14-18mm nominal diameter shafts.The spindle end machining suitable for these BF floating bearings is type E10-xx.Part...

View

Precision supports

Floating ball screw support BF 15 - Hiwin

BF15

€60.31 (€49.84 tax excl.)

Floating support type BF 15 for ball screw. Consisting of bearing rigid ball and washer from retention, it provides high rigidity and accuracy in mounting. It is assembled on the spindle on the opposite side of the motor. Suitable for 20mm nominal shaft diameter.The spindle end machining suitable for these BF floating bearings is type E10-xx.Part number:...

View

Precision supports

Floating ball screw support BF 17 - Hiwin

BF17

€76.98 (€63.62 tax excl.)

Floating support type BF 17 for ball screw. Consisting of bearing rigid ball and washer from retention, it provides high rigidity and accuracy in mounting. It is assembled on the spindle on the opposite side of the motor. Suitable for shafts with nominal diameter 25-28mm.The spindle end machining suitable for these BF floating bearings is type E10-xx.Part...

View

Precision supports

Floating ball screw support BF 20 - Hiwin

BF20

€78.65 (€65.00 tax excl.)

Floating support type BF 20 for ball screw. Consisting of bearing rigid ball and washer from retention, it provides high rigidity and accuracy in mounting. It is assembled on the spindle on the opposite side of the motor. Suitable for shafts with nominal diameter 25-28mm.The spindle end machining suitable for these BF floating bearings is type E10-xx.Part...

View

Showing 1-20 of 20 item(s)

Spindles, nuts and precision supports

Laminated trapezoidal spindle 20x4 C45 steel

Laminated trapezoidal spindle 30x6 C45 steel

Hex nut SKM 20x4

Left-hand hex nut SKM 20x4

Hexagonal nut SKM 24x5

Tuerca trapezoidal casquillo de bronce 20x4

CS 30x6 bronze cap trapezoidal nut

Bronze nut EFM 20x4

Bronze nut left-hand EFM 20x4

Bronze nut EFM 24x5

Left-hand bronze nut EFM 24x5

Bronze nut EFM 30x6

Fixed ball screw support BK 12 - Hiwin

Fixed ball screw support BK 15 - Hiwin

Fixed ball screw support BK 17 - Hiwin

Fixed ball screw support BK 20 - Hiwin

Floating ball screw support BF 12 - Hiwin

Floating ball screw support BF 15 - Hiwin

Floating ball screw support BF 17 - Hiwin

Floating ball screw support BF 20 - Hiwin

Spindles, nuts and precision supports

Client support

Company information

Your Account

Follow us in our social