List of products by supplier Generico-MOT

1
2
3
…
27

Motorvariator three-phase 0.25HP flange B5 diameter 140 shaft diameter 11

Pack

Mechanical variable speed gearmotors

Three-phase variable speed gearmotor 0.25HP flange B5 140 diameter 11 diameter shaft

€240.27 (€198.57 tax excl.)

0.25CV three-phase motor variator with B5 Ø140 flange and Ø11 output shaft, with which the speed of rotation can be varied between 950 and 190 rpm by means of the lateral maneuvering wheel. The coupling is made by means of a B5 type flange. The supply includes: Three-phase motor 0.18kw (0.25HP). Size 63 variator. Representative image for...

Mechanical speed drives

Mechanical speed variator size 63 (0.25 HP)

€164.61 (€136.04 tax excl.)

Mechanical speed variator with which the speed of rotation can be varied by means of the lateral steering wheel, to be coupled to motors with size B5 size 63 flange . Output shaft of the variator Ø11 and flange Ø140mm. Standard engine (not included) 0.25HP 1400rpm Maximum output speed: 950 rpm Minimum output speed: 190 rpm Representative image for...

Reaction arm size 25

Reaction arms for gearboxes

Reaction arm size 25

€5.60 (€4.63 tax excl.)

Reaction arm for worm gear reducer size 25 Reaction arm size 25 for worm gear reducers, to allow the assembly of the reducer adapting it to the needs of the installation.Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pre-reducers

Pre-reducer size 63 - PC63B5-140/11

€94.22 (€77.87 tax excl.)

Pre-gearbox size 63 and reduction ratio 3. This pre-gearbox is inserted between the motor and the gearbox to increase the reduction ratio. It can be directly coupled to a gearbox with flange PAM 105/11 and to a motor with flange B5 140/11. Part number: PC63B5-140/11Representative image for illustrative purposes, the item supplied will correspond to the...

Single-phase filter pump...

Pool pumps

Single-phase filter pump for swimming pool purifier 0,37kW / 0,5HP

€252.25 (€208.47 tax excl.)

Single-phase filter pump 0,5HP (0,37kW) for swimming pool filtering systems. Single-stage centrifugal pump with built-in pre-filter, designed for water recirculation in domestic and residential pools. Self-priming pump equipped with a single-phase asynchronous motor that sucks water from the pool to the filter and then be driven back into the pool....

Motorvariator three-phase 0.5CV flange B5 diameter 160 shaft diameter 14

Pack

Mechanical variable speed gearmotors

Three-phase variable speed gearmotor 0.33HP flange B5 diameter 160 axle diameter 14

€285.02 (€235.55 tax excl.)

Three-phase motor variator 0.33HP with B5 Ø160 flange and Ø14 output shaft, with which the speed of rotation can be varied between 950 and 190 rpm by means of the lateral maneuver wheel. The coupling is made by means of a B5 type flange. The supply includes: Three-phase motor 0.25kw (0.33HP). Size 71 variator. Representative image for...

Mechanical speed drives

Mechanical speed variator size 71 (0.33-0.5 HP)

€199.87 (€165.18 tax excl.)

Mechanical speed variator with which the speed of rotation can be varied by means of the lateral steering wheel, to be coupled to motors with size B5 size 71 flange . Variable speed drive output shaft Ø14 and flange Ø160mm. Standard engines (not included) 0.33-0.5HP 1400rpm Maximum output speed: 950 rpm Minimum output speed: 190 rpm Representative image...

Reaction arm size 30

Reaction arms for gearboxes

Reaction arm size 30

€8.54 (€7.06 tax excl.)

Reaction arm for worm gear reducer size 30 Reaction arm size 30 for worm gear reducers, to allow the assembly of the reducer adapting it to the needs of the installation.Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated .

Simple output axle T-25 x 11

Gearbox accessories

Simple axis of output T-25 11

€6.97 (€5.76 tax excl.)

Simple shaft of output type T-25 of Ø11mm., for reducers worm gear crown size 25. Made of rectified steel. Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Crown Endless Reducer Size 75 Flange PAM 250/28 - Motor housing 100 B5

Crown Endless Reducer Size 75 Flange PAM 250/28 - Motor housing 100 B5 2

Endless crown reducers

Crown Endless Reducer Size 75 Flange PAM 250/28 - Motor housing 100 B5

€184.61 (€152.57 tax excl.)

With hollow output shaft of Ø28mm, and input flange PAM 250/28 (Ø Ext 250mm and Ø Input shaft 28mm) type B5, suitable for motors with housing size 100. Reduction ratios: 7.5-10-15. The powers of the usual engines at 1500 rpm are: 3CV Max. net. i=30. 4CV Max. net. i=20. 5.5CV Max. net. i=10. Representative image for illustrative purposes,...

Three-phase motor 0.09Kw/0.12HP 230/400V 3000 rpm IE1 Flange B3 foot

Three-phase motor 0.09Kw/0.12HP 230/400V 3000 rpm IE1 Flange B3 foot 2

Three-phase electric motors 3000 rpm flange B3 IE1

Three-phase motor 0.09Kw 0.12HP 230/400V 3000 rpm Flange B3 foot

€60.65 (€50.12 tax excl.)

Three-phase electric motor 0.09kW (0.12HP) 230/400V 3000 rpm (2 Poles), Flange B3 foot, aluminum housing. Manufactured under European IEC regulations. Reference: SS-56M1-2 B3 Voltage: 230/400Vac 50/60Hz. Power: 0.09Kw - 0.12Hp. Number of poles: 2. Revs: 3000 rpm. Flange: B3 foot. Shaft diameter: 9mm. Size: 56M1. Energy efficiency: IE1....

Pre-reducers

Pre-reducer size 71 - PC71B5-160/14

€110.40 (€91.24 tax excl.)

Pre-gearbox size 71 and reduction ratio 3. This pre-gearbox is inserted between the motor and the gearbox to increase the reduction ratio. It can be directly coupled to a gearbox with flange PAM 120/14 and to a motor with flange B5 160/14. Part No.: PC71B5-160/14Representative image for illustrative purposes, the item supplied will correspond to the...

Single-phase filter pump...

Pool pumps

Single-phase filter pump for swimming pool purifier 0,55kW / 0,75HP

€263.07 (€217.41 tax excl.)

Single-phase filter pump 0,75hp (0,55kW) for swimming pool purifiers. Single-stage centrifugal pump with built-in pre-filter, designed for water recirculation in domestic and residential pools. Self-priming pump equipped with a single-phase asynchronous motor that sucks water from the pool to the filter and then be driven back into the pool....

Single-phase micro...

Vibration Motors

Single-phase micro vibration motor 0.03kW 3000 rpm 230V B3 Legs

€141.29 (€116.77 tax excl.)

Single-phase electric micro-vibrator 0,03kW (0,04CV) 230V 50Hz, 3000 rpm (2 Poles), flange B3 legs, aluminum housing. Intended for various fields of application in different types of industrial sectors. Small and compact size. Part number: MV21M Representative image for illustrative purposes, the item supplied will correspond to the specifications...

Motorvariator three-phase 0.5CV flange B5 diameter 160 shaft diameter 14

Pack

Mechanical variable speed gearmotors

Three-phase variable speed gearmotor 0.5HP flange B5 diameter 160 axle diameter 14

€285.63 (€236.06 tax excl.)

Motorvariator three-phase 0.5HPwith flange B5 Ø160 and output shaft Ø14, with which you can vary the speed of the turn by means of the lateral maneuvering wheel between 950 and 190 rpm. The coupling is carried out by flange type B5. The supply comprises: Three-phase motor 0.37kw (0.5HP). Variator size 71. Representative image for illustrative...

Mechanical speed drives

Mechanical speed variator size 80 (0.75-1HP)

€233.95 (€193.35 tax excl.)

Mechanical speed variator with which the speed of rotation can be varied by means of the lateral steering wheel, to be coupled to motors with size B5 size 80 flange . Output shaft of the variator Ø19 and flange Ø200mm. Standard engines (not included) 0.75-1HP 1400rpm Maximum output speed: 950 rpm Minimum output speed: 190 rpm Representative image for...

Reaction arm size 40

Reaction arms for gearboxes

Reaction arm size 40

€11.72 (€9.69 tax excl.)

Reaction arm for worm gear reducer size 40 Reaction arm size 40 for worm gear reducers, to allow the assembly of the reducer adapting it to the needs of the installation.Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Simple output axle T-30 x 14

Gearbox accessories

Simple axis output T-30 14

€10.06 (€8.31 tax excl.)

Simple output shaft type T-30 of 14mm., for auger reducers crown size 30. Made of rectified steel. Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Three-phase motor 0.12Kw/0.16CV 230/400V 3000 rpm B3 foot flange

Three-phase motor 0.12Kw/0.16CV 230/400V 3000 rpm B3 foot flange 2

Three-phase electric motors 3000 rpm flange B3 IE1

Three-phase motor 0.12Kw 0.16HP 230/400V 3000 rpm Flange B3 foot

€61.83 (€51.10 tax excl.)

Three-phase electric motor 0,12kW (0,16HP) 230/400V 3000 rpm (2 Poles), Flange B3 foot, aluminum housing. Manufactured under European IEC regulations. Reference: SS-56M2-2 B3 Voltage: 230/400Vac 50/60Hz Number of poles: 2 Revs: 3000 rpm Flange: B3 foot Shaft diameter: 9mm Power: 0.12Kw - 0.16hp Size: 56M2 Energy efficiency: IE1...

Pre-reducers

Pre-reducer size 80 - PC80B5-200/19

€137.63 (€113.74 tax excl.)

Pre-gearbox size 80 and reduction ratio 3. This pre-gearbox is inserted between the motor and the gearbox to increase the reduction ratio. It can be directly coupled to a gearbox with flange PAM 160/19 and to a motor with flange B5 200/19. Part number: PC80B5-200/19Representative image for illustrative purposes, the item supplied will correspond to the...

Single-phase filter pump...

Pool pumps

Single-phase filter pump for swimming pool purifier 0,75kW / 1HP

€276.75 (€228.72 tax excl.)

Single-phase filter 1HP (0.75kW) pump for swimming pool filtering systems. Single-stage centrifugal pump with built-in pre-filter, designed for water recirculation in domestic and residential pools. Self-priming pump equipped with a single-phase asynchronous motor that sucks water from the pool to the filter and then be driven back into the pool....

Single-phase micro...

Vibration Motors

Single-phase micro vibration motor 0,07kW 3000 rpm 230V B3 Legs

€153.05 (€126.49 tax excl.)

Single-phase electric micro-vibrator 0,07kW (0,09CV) 230V 50Hz, 3000 rpm (2 Poles), flange B3 legs, aluminum housing. Intended for various fields of application in different types of industrial sectors. Small and compact size. Part number: MV41M Representative image for illustrative purposes, the item supplied will correspond to the specifications...

Motorvariator three-phase 1CV flange B5 diameter 200 shaft diameter 19

Pack

Mechanical variable speed gearmotors

Three-phase variable speed gearmotor 1HP flange B5 diameter 200 diameter 19 shaft

€345.58 (€285.60 tax excl.)

Three-phase motor 1HP drive with flange B5'200 and output shaft 19, with which you can vary the speed of the turn by means of the lateral manoeuvre steering wheel between 950 and 190 rpm. The coupling is done by type B5 flange. Supply includes: Three-phase motor 0.75kw (1HP). Varied size 80. Representative image for illustrative...

Mechanical speed drives

Mechanical speed variator size 90 (1.5-2 HP)

€326.42 (€269.77 tax excl.)

Mechanical speed variator with which the speed of rotation can be varied by means of the lateral steering wheel, to be coupled to motors with size B5 size 90 flange . Output shaft of the variator Ø24 and flange Ø200mm. Standard engines (not included) 1.5-2HP 1400rpm Maximum output speed: 1000 rpm Minimum output speed: 190 rpm...

Reaction arm size 50

Reaction arms for gearboxes

Reaction arm size 50

€11.43 (€9.45 tax excl.)

Reaction arm for worm gear reducer size 50 Reaction arm size 50 for worm gear reducers, to allow the assembly of the reducer adapting it to the needs of the installation.Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Endless crown reducer Size 30 Flange PAM 80/9 - Motor housing 56 B14

Endless crown reducer Size 30 Flange PAM 80/9 - Motor housing 56 B14 2

Endless crown reducers

Endless crown reducer Size 30 Flange PAM 80/9 - Motor housing 56 B14

€65.39 (€54.04 tax excl.)

With hollow output shaft of Ø14mm, and input flange PAM 80/9 (Ø Ext 80mm and Ø Input shaft 9mm) type B14, suitable for motors with housing size 56. Reduction ratios available: 7.5-10-15-20-25-30-40-50-63-80. The powers of the usual motors for these reducers are 0.12hp and 0.16hp (maximum recommended ratio I = 60) 1500 rpm. Representative image...

Simple output axle T-40 x 18

Gearbox accessories

Simple output axle T-40 x 18

€11.72 (€9.69 tax excl.)

Simple output shaft type T-40 of 18mm., for auger reducers crown size 40. Made of rectified steel. Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Three-phase motor 0.18Kw/0.25CV 230/400V 3000 rpm B3 foot flange

Three-phase motor 0.18Kw/0.25CV 230/400V 3000 rpm B3 foot flange 2

Three-phase electric motors 3000 rpm flange B3 (foot) car. aluminum IE1, IE2, IE3

Three-phase motor 0.18Kw 0.25HP 230/400V 3000 rpm Flange B3 foot

€69.19 (€57.18 tax excl.)

Three-phase electric motor 0.18kW (0.25HP) 230/400V 3000 rpm Flange B3 foot, aluminum housing. Manufactured under European IEC regulations. Reference: SS-63M1-2 B3 Voltage: 230/400Vac 50/60Hz Number of poles: 2 Revolutions: 3000 rpm Flange: B3 foot Shaft diameter: 11mm Power: 0.18Kw - 0.25hp Housing size 63 Energy efficiency: IE1...

Pre-reducers

Pre-reducer size 90 - PC90B5-200/24

€139.09 (€114.95 tax excl.)

Pre-gearbox size 90 and reduction ratio 3. This pre-gearbox is inserted between the motor and the gearbox to increase the reduction ratio. It can be directly coupled to a gearbox with flange PAM 160/24 and to a motor with flange B5 200/24. Part number: PC90B5-200/24Representative image for illustrative purposes, the item supplied will correspond to the...

Single-phase self-priming...

Single-phase self-priming... 2

Pool pumps

Single-phase self-priming pump for swimming pool purifier 0,75kW / 1hp

€288.06 (€238.07 tax excl.)

Single-phase filter 1HP (0.75kW) pump for swimming pool filtering systems. Single-stage centrifugal pump with built-in pre-filter, designed for water recirculation in domestic and residential pools. Self-priming pump equipped with a single-phase asynchronous motor that sucks water from the pool to the filter and then be driven back into the pool....

Vibration motor...

Vibration Motors

Vibration motor single-phase 0,08kW 3000 rpm 230V B3 Legs

€177.79 (€146.93 tax excl.)

Electric motor-vibrator single-phase 0,08kW (0,11CV) 230V 50Hz, 3000 rpm (2 poles), flange B3 legs, aluminum housing. Intended for various fields of application in different types of industrial sectors. Reference: MV60/3M Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Motorvariator three-phase 2CV flange B5 diameter 200 shaft diameter 24

Pack

Mechanical variable speed gearmotors

Three-phase variable speed gearmotor 2HP flange B5 200 diameter 24 diameter shaft

€479.67 (€396.42 tax excl.)

Three-phase motor 2HP drive with flange B5'200 and output shaft 24, with which you can vary the speed of the turn by means of the lateral manoeuvre steering wheel between 950 and 190 rpm. The coupling is done by type B5 flange. Supply includes: Three-phase motor 1.5kw (2HP). Varied size 90. Representative image for illustrative purposes, the...

Mechanical speed drives

Mechanical speed drive size 100 (3HP)

€520.19 (€429.91 tax excl.)

Mechanical speed inverter with which you can vary the speed of the turn by means of the side manoeuvre steering wheel, to be coupled to motors with flange size B5 size 100. Drive output shaft 28 and flange of 250mm. Regular engines (not included) 3HP 1400rpm Vel. maximum output: 1000 rpm Vel. minimum output: 190 rpm

Reaction arm size 63

Reaction arms for gearboxes

Reaction arm size 63

€14.74 (€12.18 tax excl.)

Reaction arm for worm gear reducer size 63 Reaction arm size 63 for worm gear reducers, to allow the assembly of the reducer adapting it to the needs of the installation.Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Simple output axle T-50 x 25

Gearbox accessories

Simple output axle T-50 25

€15.09 (€12.47 tax excl.)

Simple shaft of output type T-50 of Ø25m., for reducers worm gear crown size 50. Made of rectified steel. Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Endless crown reducer size. 30 63B14

Endless crown reducers

Endless crown reducer Size 30 Flange PAM 90/11 - Motor housing 63 B14

€65.39 (€54.04 tax excl.)

With hollow output shaft of Ø14mm, and input flange PAM 90/11 (Ø Ext 90mm and Ø Input shaft 11mm) type B14, suitable for motors with housing size 63. Available reduction ratios: 7,5-10-15-20-25-30-40. The usual motor powers for these reducers are 0.16hp and 0.25hp (maximum recommended ratio I=25) 1500 rpm. Representative image for illustrative...

Showing 1-36 of 964 item(s)

1
2
3
…
27

Product added to wishlist