List of products by supplier Generico-AIR

Intermediate straight fittings

Spike inserted tube diameter 10 to diameter 8

Spike reduction inserted tube 10 to fitting 8 Representative image for illustrative purposes, the article supplied will correspond to the indicated specifications.

Intermediate straight fittings

Spike inserted tube diameter 12 to diameter 10

RR411210

€3.73 (€3.08 tax excl.)

Reduction spike inserted tube diameter 12 to fitting 10SKU: RR41.12.10Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Accessories for filtration groups

Oil for pneumatic lubrication 1 liter

OIL22

€23.01 (€19.02 tax excl.)

Oil for lubrication of machinery and pneumatic installations, in a 1-liter container. Semisynthetic oil of great lubricating power, reduces friction and wear by increasing the useful life of the pneumatic components of the machines.Reference: OIL.22Representative image for illustrative purposes, the article supplied will correspond to the specifications...

Flow and pressure regulators

Flow Regulator M5 tube 4 unidirectional adjustable technopolymer

RRGSCM54

€7.05 (€5.83 tax excl.)

M5 steerable flow regulator with fast racor for outer Ø4mm tube. Mounting on cylinder.Reference: RRGSC. M5.04Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Complete square artifice in aluminum for iso cylinder diameter 125 - ADAJUSA

Complete square artifice in aluminum for iso cylinder diameter 125 - ADAJUSA 2

Pack

ISO Squad Joints

Complete ISO diameter 125 squadron joint

CFPCAS0125

€98.54 (€81.44 tax excl.)

Complete square artifice in aluminum for ISO cylinder of Ø125 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Flow and pressure regulators

Flow Regulator M5 tube 6 unidirectional adjustable technopolymer

RRGSCM506

€7.05 (€5.83 tax excl.)

M5 steerable flow regulator with fast racor for outer Ø6mm tube. Mounting on cylinder.Reference: RRGSC. M5.06Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Adjustable racor 1 body 1/8 tube diameter 4 - ADAJUSA

Steerable fittings

Adjustable fitting 1 body 1/8 tube diameter 4

RRG181804

€2.60 (€2.15 tax excl.)

Adjustable fitting 1 body of 1/8" for tube 4 exterior, banjo type, manufactured in technopolymer and screw in nickel-plated brass, for pneumatic applications. Representative image for illustrative purposes, the article supplied shall correspond to the specifications indicated.

Racor cylindrical rotating elbow M6 tube Ø6 - ADAJUSA

Racor cylindrical rotating elbow M6 tube Ø6 - ADAJUSA 2

Fittings swivel elbow

Racor cylindrical rotating elbow M6 tube 6 Basic series

RRG12M606

€2.67 (€2.21 tax excl.)

M6 swivel elbow fitting for 6mm Xt tube. Male cylindrical thread, with O-ring included. Fast connection, very simple and effective. Valid fitting for pneumatic, grease and vacuum installations. Representative image for illustrative purposes, the article supplied will correspond to the indicated specifications.

Flow and pressure regulators

Flow Regulator 1/8 tube 4 unidirectional adjustable technopolymer

RRGSC1804

€7.82 (€6.46 tax excl.)

Adjustable flow regulator of 1/8 with quick fitting for outer Ø4mm tube. Cylinder mounting.Reference: RRGSC.1/8.04 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pressure switch and vacuostat mounting bracket - ADAJUSA

Pressure switches, vacuum switches and flowmeters

Bracket mounting pressure switch and vacuostato

PE40A

€7.32 (€6.05 tax excl.)

Support for mounting pressure switches and digital vacuostates. The brackets are made of steel and allow for reliable and simple assembly. Reference: PE.40.A Representative image for illustrative purposes, the article supplied will correspond to the indicated specifications.

Adjustable racor 1 body 1/8 tube diameter 6 - ADAJUSA

Steerable fittings

Adjustable fitting 1 body 1/8 tube diameter 6

RRG181806

€3.07 (€2.54 tax excl.)

Adjustable racor 1 body of 1/8 "for outer Ø6 tube, banjo type, manufactured in technopolymer, for pneumatic applications.Reference: RRG18.1/8.06 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Straight fittings

Automatic straight racor M6 tube 6mm

RRG01M606

€1.72 (€1.42 tax excl.)

Metal straight fitting with M6 thread for tube-Alex 6mm. Male cylindrical thread, with toric gasket included. Very simple quick connection. For pneumatic and vacuum applications. Representative image for illustrative purposes, the article supplied shall correspond to the specifications indicated.

Pressure switch and vacuum switch panel mount support - ADAJUSA

Pressure switch and vacuum switch panel mount support - ADAJUSA 2

Pressure switches, vacuum switches and flowmeters

Bracket mounting transpanel pressure switch and vacuostato

PE40B

€11.20 (€9.26 tax excl.)

Support for mounting digital pressure switches and vacuostats. The bracket allows the pressure switch to be mounted on a panel. Reference: PE.40.B Valid for references: Pressure switch: P42P04 Vacuostat: PE40C01V2 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pressure switches, vacuum switches and flowmeters

Transpanel mounting bracket for pressure switch and vacuum switch with panel adapter

PE40C

€11.20 (€9.26 tax excl.)

Support for transpanel mounting of digital pressure and vacuum switches. Simple and secure installation of devices. Includes the front body and panel adapter. Reference: PE.40.C Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Pneumatic pedal with protection - ADAJUSA

Pneumatic pedal with protection - ADAJUSA 2

Pushbuttons and pneumatic actuators

Pneumatic pedal with 1/4 5/2 monostable protection

OP52M4

€62.27 (€51.46 tax excl.)

Pneumatic pedal with protection. Metal valve of 1/4 and 5 ways monostable, when acting, the valve changes position and when it stops acting, it returns to the resting position, protection housing in blue polycarbonate.Reference: OP52M4 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Flow and pressure regulators

Flow Regulator 1/8 tube 6 unidirectional adjustable technopolymer

RRGSC1806

€7.87 (€6.50 tax excl.)

Adjustable flow regulator of 1/8 with fast racor for outer Ø6mm tube. Mounting on cylinder.Reference: RRGSC.1/8.06 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

View

Flow and pressure regulators

Flow Regulator 1/8 tube 8 unidirectional adjustable technopolymer

RRGSC1808

€8.52 (€7.04 tax excl.)

Adjustable flow regulator of 1/8 with fast racor for outer Ø8mm tube. Mounting on cylinder.Reference: RRGSC.1/8.08Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Adjustable racor 1 body 1/4 tube diameter 6 - ADAJUSA

Steerable fittings

Adjustable fitting 1 body 1/4 tube diameter 4

RRG181404

€3.45 (€2.85 tax excl.)

1/4" 1-body adjustable fitting for 4 outer diameter tube, banjo type, made of technopolymer, for pneumatic applications. Reference: RRG18.1/4.04 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Collector 5 sockets Ø8 with fittings - ADAJUSA

Pneumatic dealers

Collector 5 fittings diameter 8

RR3408

€6.03 (€4.98 tax excl.)

Collector distributor with 5 Ø8 fittings, manufactured in technopolymer, for pneumatic applications.Reference: RR34.08 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Steerable fittings

Adjustable fitting 1 body 1/4 tube diameter 6

RRG181406

€3.45 (€2.85 tax excl.)

Adjustable fitting 1 body 1/4" for outer tube 6, banjo type, manufactured in technopolymer, for pneumatic applications. Representative image for illustrative purposes, the article supplied will correspond to the indicated specifications.

Adjustable racor 1 body 1/4 tube diameter 8 - ADAJUSA

Steerable fittings

Adjustable fitting 1 body 1/4 tube diameter 8

RRG181408

€3.45 (€2.85 tax excl.)

Adjustable fitting 1 1/4" body for outer tube 8, banjo type, manufactured in technopolymer, for pneumatic applications. Representative image for illustrative purposes, the article supplied will correspond to the indicated specifications.

Flow and pressure regulators

Flow Regulator 1/4 tube 6 unidirectional adjustable technopolymer

RRGSC1406

€8.31 (€6.87 tax excl.)

Adjustable flow regulator of 1/4 with quick fitting for outer Ø6mm tube. Cylinder mounting.Reference: RRGSC.1/4.06 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

View

Flow and pressure regulators

Flow Regulator 1/4 tube 8 unidirectional adjustable technopolymer

RRGSC1408

€9.12 (€7.54 tax excl.)

Adjustable flow regulator of 1/4 with quick fitting for outer Ø8mm tube. Cylinder mounting.Reference: RRGSC.1/4.08 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Inserted tube spike diameter 6 to diameter 4 - ADAJUSA

Intermediate straight fittings

Spike inserted tube diameter 6 to diameter 4

RR410604

€1.89 (€1.56 tax excl.)

Reduction nipple inserted tube 6 to fitting 4. Allows the connection of a tube of 4 on a connection of 6. Representative image for illustrative purposes, the article supplied will correspond to the indicated specifications.

Adjustable racor 1 body 3/8 tube diameter 8 - ADAJUSA

Steerable fittings

Adjustable fitting 1 body 3/8 tube diameter 6

RRG183806

€4.61 (€3.81 tax excl.)

1-body 3/8" adjustable fitting for Ø6 external tube, banjo type, made of technopolymer, for pneumatic applications. Reference: RRG18.3/8.06 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Inserted tube W8 spike to diameter Ø6 - ADAJUSA

Intermediate straight fittings

Spike inserted tube diameter 8 to diameter 6

RR410806

€2.14 (€1.77 tax excl.)

Spike reduction inserted tube 8 to fitting 6 Representative image for illustrative purposes, the article supplied will correspond to the indicated specifications.

Steerable fittings

Adjustable fitting 1 body 3/8 tube diameter 8

RRG183808

€4.61 (€3.81 tax excl.)

Adjustable fitting 1 3/8" body for outer tube 8, banjo type, manufactured in technopolymer, for pneumatic applications. Representative image for illustrative purposes, the article supplied will correspond to the indicated specifications.

Adjustable racor 1 body 3/8 tube diameter 10 - ADAJUSA

Steerable fittings

Adjustable fitting 1 body 3/8 tube diameter 10

RRG183810

€4.11 (€3.40 tax excl.)

Adjustable fitting 1 3/8" body for outer tube, banjo type, made of technopolymer, for pneumatic applications. Representative image for illustrative purposes, the article supplied will correspond to the indicated specifications.

Flow and pressure regulators

Flow Regulator 1/4 tube 10 unidirectional adjustable technopolymer

RRGSC1410

€10.38 (€8.58 tax excl.)

Adjustable flow regulator of 1/4 with fast racor for outer Ø10mm tube. Mounting on cylinder.Reference: RRGSC.1/4.10Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Adjustable racor 1 body 1/2 tube diameter 10 - ADAJUSA

Steerable fittings

Adjustable fitting 1 body 1/2 tube diameter 10

RRG181210

€6.84 (€5.65 tax excl.)

Adjustable fitting 1 1/2" body for outer tube, banjo type, manufactured in technopolymer, for pneumatic applications. Representative image for illustrative purposes, the article supplied will correspond to the indicated specifications.

Steerable fittings

Adjustable fitting 2 bodies 3/8 tube diameter 8

RRGD183808

€4.61 (€3.81 tax excl.)

Adjustable 2-body 3/8" fitting for Ø8 external tube, banjo type, made of technopolymer, for pneumatic applications. Reference: RRGD18.3/8.08 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Steerable fittings

Adjustable fitting 2 bodies 1/2 tube diameter 8

RRGD181208

€6.84 (€5.65 tax excl.)

Adjustable 2-body 1/2" fitting for Ø8 external tube, banjo type, made of technopolymer, for pneumatic applications. Reference: RRGD18.1/2.08 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Steerable fittings

Adjustable fitting 2 bodies 1/2 tube diameter 12

RRGD181212

€6.84 (€5.65 tax excl.)

Adjustable 2-body 1/2" fitting for Ø12 external tube, banjo type, made of technopolymer, for pneumatic applications. Reference: RRGD18.1/2.12 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Intermediate "Y" fittings

Racor Y inlet diameter 12 outlet diameter 10

RR331210

€3.65 (€3.02 tax excl.)

Racor "Y" automatic intermediate, tube input Ø12mm and tube outputs Ø10mm, quick connection. Made of black techno-polymer.Reference: RR33.12.10 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Flow and pressure regulators

Flow Regulator 3/8 tube 6 unidirectional adjustable technopolymer

RRGSC3806

€10.74 (€8.88 tax excl.)

Adjustable flow regulator of 3/8 with fast racor for outer Ø6mm tube. Mounting on cylinder.Reference: RRGSC.3/8.06 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Flow and pressure regulators

Flow Regulator 3/8 tube 10 unidirectional adjustable technopolymer

RRGSC3810

€11.68 (€9.65 tax excl.)

Adjustable flow regulator of 3/8 with fast racor for outer tube Ø10mm. Mounting on cylinder.Reference: RRGSC.3/8.10 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Flow and pressure regulators

Flow Regulator 1/2 tube 8 unidirectional adjustable technopolymer

RRGSC1208

€14.85 (€12.27 tax excl.)

Adjustable flow regulator of 1/2 with fast racor for outer Ø8mm tube. Mounting on cylinder.Reference: RRGSC.1/2.08Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Flow and pressure regulators

Flow Regulator 1/2 tube 10 unidirectional adjustable technopolymer

RRGSC1210

€15.89 (€13.13 tax excl.)

Adjustable flow regulator of 1/2 with fast racor for outer Ø10mm tube. Mounting on cylinder.Reference: RRGSC.1/2.10Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Flow and pressure regulators

Flow Regulator 1/2 tube 12 unidirectional adjustable technopolymer

RRGSC1212

€16.82 (€13.90 tax excl.)

Adjustable flow regulator of 1/2 with fast racor for outer tube Ø12mm. Mounting on cylinder.Reference: RRGSC.1/2.12Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Unidirectional flow regulator tube 6 - ADAJUSA

Unidirectional flow regulator tube 6 - ADAJUSA 2

Flow and pressure regulators

6mm tube-tube unidirectional flow Regulator

RRI06

€9.52 (€7.87 tax excl.)

Unidirectional linear flow Regulator for 6mm diameter tube, to control the advance speed of pneumatic cylinders. Reference: RRI.06 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Unidirectional flow regulator tube 8 - ADAJUSA

Unidirectional flow regulator tube 8 - ADAJUSA 2

Flow and pressure regulators

8mm tube-tube unidirectional flow Regulator

RRI08

€11.14 (€9.21 tax excl.)

Unidirectional linear flow Regulator for 8mm diameter tube, to control the advance speed of pneumatic cylinders. Reference: RRI.08 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

View

Unidirectional flow regulator tube 10 - ADAJUSA

Unidirectional flow regulator tube 10 - ADAJUSA 2

Flow and pressure regulators

10mm tube-tube unidirectional flow Regulator

RRI10

€12.66 (€10.46 tax excl.)

Unidirectional linear flow Regulator for 10mm diameter tube, to control the advance speed of pneumatic cylinders. Reference: RRI.10 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Flow and pressure regulators

12mm tube-tube unidirectional flow Regulator

RRI12

€14.17 (€11.71 tax excl.)

Unidirectional linear flow Regulator for 12mm diameter tube, to control the advance speed of pneumatic cylinders. Reference: RRI.12 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Anti-return valves

Anti-return valve 3/8

VUFF3

€23.75 (€19.63 tax excl.)

3/8" anti-return valve, metallic. It allows the passage of the aíre onlyo in one of the two directions of travel. Made of chromed brass with gaskets in NBR. Female thread on both sides.Reference: VU. FF.3 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

1/4 female 2-way lever cut-off valve - ADAJUSA

Cutting and unloading valves

Lever cut-off valve 1/4 female 2-way

VHH4

€4.62 (€3.82 tax excl.)

1/4" female 2-way thread cut-off valve, lever-operated, for pneumatic applications.Reference: VHH.4Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

1/4 female 2-way cutting valve with lever

Cutting and unloading valves

Cut-off valve 3/8 female 2 way with lever

VHH3

€5.99 (€4.95 tax excl.)

Cut-off valve 3/8 female 2 way with lever, for pneumatic applications.Reference: VHH.3Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

3/4 female 2-way lever cut-off valve - ADAJUSA

Cutting and unloading valves

female 2-way lever cut-off valve 3/4

VHH34

€13.18 (€10.89 tax excl.)

3/4" female 2-way thread cut-off valve, lever drive, for pneumatic applications.Reference: VHH.34Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

1 female 2-way lever cut-off valve - ADAJUSA

Cutting and unloading valves

1-way 2-way lever-out 1-female cut-off valve

VHH1

€21.72 (€17.95 tax excl.)

1" female 2-way thread cut-off valve, lever drive, for pneumatic applications.Reference: VHH.1Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Anti-return valves

Check valve 1/2 series Europe

VU2UNI

€8.19 (€6.77 tax excl.)

1/2" anti-return check valve, metal Europa series. It allows the passage of the aíre, vacuum or fluid, only in one of the two directions of travel. Made of chromed brass with gaskets in NBR. Female thread on both sides.Reference: VU.12.UNIV Representative image for illustrative purposes, the article supplied will correspond to the specifications...

Anti-return valves

Check valve 3/4 series Europe

VU34UNI

€12.50 (€10.33 tax excl.)

3/4" anti-return check valve, metal Europa series. It allows the passage of the aíre, vacuum or fluid, only in one of the two directions of travel. Made of chromed brass with gaskets in NBR. Female thread on both sides.Reference: VU.34.UNI Representative image for illustrative purposes, the article supplied will correspond to the specifications...

Anti-return valves

Check valve 1 series Europe

VU1UNI

€15.45 (€12.77 tax excl.)

1" anti-return check valve, metal Europa series. It allows the passage of the aíre, vacuum or fluid, only in one of the two directions of travel. Made of chromed brass with gaskets in NBR. Female thread on both sides.Reference: VU.1.UNI Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Check valve 1 1/4 series Europe - ADAJUSA

Anti-return valves

Check valve 1 1/4 series Europe

VU114UNI

€25.69 (€21.23 tax excl.)

1 1/4" anti-return check valve, metal Europa series. It allows the passage of the aíre, vacuum or fluid, only in one of the two directions of travel. Made of chromed brass with gaskets in NBR. Female thread on both sides.Reference: VU.114.UNI Representative image for illustrative purposes, the article supplied will correspond to the specifications...

Check valve 1 1/2 series Europe - ADAJUSA

Check valve 1 1/2 series Europe - ADAJUSA 2

Delivery 3-5 days.

Anti-return valves

Check valve 1 1/2 series Europe

VU112UNI

€34.30 (€28.35 tax excl.)

Anti-return check valve 1 1/2" , metal Europa series. It allows the passage of the aíre, vacuum or fluid, only in one of the two directions of travel. Made of chromed brass with gaskets in NBR. Female thread on both sides.efference: VU112UNI Representative image for illustrative purposes, the article supplied will correspond to the specifications...

Delivery 3-5 days

Anti-return valves

Check valve 2 series Europe

VU22UNI

€49.28 (€40.73 tax excl.)

2" anti-return check valve, metal Europa series. It allows the passage of the aíre, vacuum or fluid, only in one of the two directions of travel. Made of chromed brass with gaskets in NBR. Female thread on both sides.Reference: VU2UNI Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Check valve 2 1/2" series Europe - ADAJUSA

Anti-return valves

Check valve 2 1/2 series Europe

VU212UNI

€103.96 (€85.92 tax excl.)

2 1/2" anti-return check valve, metal Europa series. It allows the passage of the aíre, vacuum or fluid, only in one of the two directions of travel. Made of chromed brass with gaskets in NBR. Female thread on both sides.Reference: VU.212.UNI Representative image for illustrative purposes, the article supplied will correspond to the specifications...

Anti-return valves

Anti-return valve tube diameter 4 in polyamide

VURTT04

€6.28 (€5.19 tax excl.)

Anti-return valve with built-in fittings for tube Ø4, in polyamide (plastic). It allows the passage of the aíre onlyo in one of the two directions of travel.Reference: VU. R.TT.04 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Anti-return valve tube 6 in polyamide - Airon - ADAJUSA

Anti-return valves

Anti-return valve tube diameter 6 in polyamide

VURTT06

€6.81 (€5.63 tax excl.)

Anti-return valve with built-in fittings for tube Ø6, in polyamide (plastic). It allows the passage of the aíre onlyo in one of the two directions of travel.Reference: VU. R.TT.06 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Anti-return valves

Anti-return valve tube diameter 8 in polyamide

VURTT08

€6.98 (€5.77 tax excl.)

Anti-return valve with built-in fittings for tube Ø8, in polyamide (plastic). It allows the passage of the aíre onlyo in one of the two directions of travel.Reference: VU. R.TT.08 Representative image for illustrative purposes, the article supplied shall correspond to the specifications indicated.

Anti-return valves

Anti-return valve tube diameter 10 in polyamide

VURTT10

€11.94 (€9.87 tax excl.)

Anti-return valve with built-in fittings for tube Ø10, in polyamide (plastic). It allows the passage of the aíre onlyo in one of the two directions of travel.Reference: VU. R.TT.10 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Anti-return valves

Check valve 3/8 series Europe

VU3UNIV

€6.33 (€5.23 tax excl.)

3/8" anti-return check valve, metal Europa series. It allows the passage of the aíre, vacuum or fluid, only in one of the two directions of travel. Made of chromed brass with gaskets in NBR. Female thread on both sides.Reference: VU.38.UNIV Representative image for illustrative purposes, the article supplied will correspond to the specifications...

Anti-return valves

Non-return valve 1/2

VUFF2

€24.38 (€20.15 tax excl.)

1/2" non-return valve, metal. It allows the passage of the air only in one of the two directions of travel. Made of chrome brass with NBR gaskets. Female thread on both sides.Reference: VUFF2 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Rear joint male for diameter cylinder 63AIRON - adajusa.es

Pneumatic cylinder accessories

Rear joint male cylinder diameter 63

CM063

€14.13 (€11.68 tax excl.)

Male rear joint for pneumatic cylinder diameter 63mm.Reference: CM.063Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Full ISO square articulation - ADAJUSA 2

Pack

Pneumatic cylinder accessories

Square joint Iso full diameter 32

PK-CFPCAS032

€19.06 (€15.75 tax excl.)

Full square artifice (charnela, shaft and back cover) in aluminium for ISO cylinder of Ø32Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pack

Pneumatic cylinder accessories

Square joint ISO full diameter 40

PK-CFPCAS040

€23.26 (€19.22 tax excl.)

Full square articulation (charnela, shaft and back cover) in aluminium for ISO cylinder of Ø40Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pack

Pneumatic cylinder accessories

Square joint ISO full diameter 50

PK-CFPCAS050

€26.10 (€21.57 tax excl.)

Full square articulation (tray, shaft and back cover) in aluminium for ISO cylinder of Ø50Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pack

Pneumatic cylinder accessories

Square joint ISO full diameter 80

PK-CFPCAS080

€40.67 (€33.61 tax excl.)

Full square artifice (tray, shaft and countercharnela) in aluminium for ISO cylinder of Ø80Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pack

Pneumatic cylinder accessories

Square joint ISO full diameter 63

PK-CFPCAS063

€35.11 (€29.02 tax excl.)

Full square articulation (tray, shaft and back cover) in aluminium for ISO cylinder of Ø63Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pack

Pneumatic cylinder accessories

Square joint ISO full diameter 100

PK-CFPCAS100

€57.83 (€47.79 tax excl.)

Full square artifice (tray, shaft and back cover) in aluminium for ISO cylinder of Ø100Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pack

Pneumatic cylinder accessories

Rear joint Iso full diameter 32

PK-CMPCCF32

€19.47 (€16.09 tax excl.)

Full straight rear artifice in aluminium for ISO cylinder of Ø32 1 Hind female Charnela 1 Shaft (bolt) 1 Rear male charnela Screws Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pack

Pneumatic cylinder accessories

Rear joint Iso full diameter 40

PK-CMPCCF40

€21.14 (€17.47 tax excl.)

Full straight rear artifice in aluminium for ISO cylinder of Ø40 1 Hind female Charnela 1 Shaft (bolt) 1 Rear male charnela Screws Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pack

Pneumatic cylinder accessories

Rear joint Iso full diameter 50

PK-CMPCCF50

€24.07 (€19.89 tax excl.)

Full straight rear artifice in aluminium for ISO cylinder of Ø50 1 Hind female Charnela 1 Shaft (bolt) 1 Rear male charnela Screws Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pack

Pneumatic cylinder accessories

Rear joint Iso full diameter 63

PK-CMPCCF63

€30.06 (€24.84 tax excl.)

Full straight rear artifice in aluminium for ISO cylinder of Ø63 1 Hind female Charnela 1 Shaft (bolt) 1 Rear male charnela Screws Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pack

Pneumatic cylinder accessories

Rear joint Iso full diameter 80

PK-CMPCCF80

€37.87 (€31.30 tax excl.)

Full straight rear artifice in aluminium for ISO cylinder of Ø80 1 Hind female Charnela 1 Shaft (bolt) 1 Rear male charnela Screws Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pack

Pneumatic cylinder accessories

Rear joint ISO full diameter 100

PK-CMPCCF100

€50.77 (€41.96 tax excl.)

Full straight rear artifice in aluminium for ISO cylinder of Ø100 1 Hind female Charnela 1 Shaft (bolt) 1 Rear male charnela Screws Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pack

Pneumatic cylinder accessories

Rear joint Iso full diameter 125

PK-CMPCCF125

€86.72 (€71.67 tax excl.)

Full straight rear artifice in aluminium for ISO cylinder of Ø125 1 Hind female Charnela 1 Shaft (bolt) 1 Rear male charnela Screws Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pack

Pneumatic cylinder accessories

Rear joint for cylinder diameter 32mm with axle

PK-CFPC32

€10.02 (€8.28 tax excl.)

Female rear joint for cylinder Ø32 manufactured according to ISO standard. Mounting on pneumatic cylinders. Made of aluminum. The supply includes the shaft.Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Ø50 shaft for ISO articulation - ADAJUSA

Pneumatic cylinder accessories

Diameter axis 50 for ISO joint

PC050

€2.12 (€1.75 tax excl.)

Shaft (bolt) Ø50 to be mounted on ISO joints. Mounting on pneumatic cylinders.Reference: PC.050Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

100 diameter axis for ISO joint - ADAJUSA

Pneumatic cylinder accessories

Diameter axis 100 for ISO joint

PC100

€3.97 (€3.28 tax excl.)

Shaft (bolt) Ø100 to be mounted on ISO joints. Mounting on pneumatic cylinders.Reference: PC.100Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Charnela female rear diameter 100 - adajusa.es

Pneumatic cylinder accessories

Charnela female rear cylinder diameter 100

CF100

€22.74 (€18.79 tax excl.)

Aluminum rear female charnela for cylinder Ø100 ISO joints. Mounting on pneumatic cylinders.Reference: CF.100Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Charnela rear female for diameter cylinder 32 AIRON - adajusa.es

Pneumatic cylinder accessories

Charnela female rear cylinder diameter 32

CF032

€8.28 (€6.84 tax excl.)

Aluminum rear female charnela for cylinder Ø32 ISO joints. Mounting on pneumatic cylinders.Reference: CF.032Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Pneumatic cylinder accessories

Front fixing flange diameter 32

FV032

€11.79 (€9.74 tax excl.)

Front flange for fixing a 32mm diameter pneumatic cylinder. For ISO standard cylinders, made of steel. This flange is valid for cylinders manufactured according to ISO 15552 - ISO 6431 of any brand. Reference: FV.032 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Fixed squadron cylinder diameter 32 - ADAJUSA

Pneumatic cylinder accessories

Cylinder fixing Squad diameter 32

PB032

€3.35 (€2.77 tax excl.)

Fixing Squad for pneumatic cylinder diameter 32mm. This fixing bracket is suitable for cylinders manufactured according to ISO 15552 - ISO 6431 of any brand. Reference: PB.032 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Rear joint male for diameter cylinder 32 AIRON - adajusa.es

Pneumatic cylinder accessories

Rear joint male cylinder diameter 32

CM032

€9.45 (€7.81 tax excl.)

Male rear joint for pneumatic cylinder diameter 32mm.Reference: CM.032Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Pneumatic cylinder accessories

Diameter axis 32 for ISO joint

PC032

€1.74 (€1.44 tax excl.)

Shaft (bolt) Ø32 to be mounted on ISO joints. Mounting on pneumatic cylinders.Reference: PC.032Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Aluminum counter-plate for cylinder - adajusa.com.

Pneumatic cylinder accessories

Countercharnela aluminum cylinder diameter 32

AS032

€9.04 (€7.47 tax excl.)

Aluminum countercharnella for cylinder Ø32 ISO joints. Mounting on pneumatic cylinders.Reference: AS.032Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Pneumatic cylinder accessories

Front fixing flange diameter 40

FV040

€12.72 (€10.51 tax excl.)

Front flange for fixing a 40mm diameter pneumatic cylinder. For ISO standard cylinders, made of steel. This flange is valid for cylinders manufactured according to ISO 15552 - ISO 6431 of any brand. Reference: FV.040 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Fixed squadron cylinder diameter 40 - ADAJUSA

Pneumatic cylinder accessories

Fixing Squad for cylinder diameter 40

PB040

€3.63 (€3.00 tax excl.)

Fixing Squad for pneumatic cylinder diameter 40mm. Reference: PB.040 This fixing bracket is suitable for cylinders manufactured according to ISO 15552 - ISO 6431 of any brand. Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Charnela rear female for diameter cylinder 40 AIRON - adajusa.es

Pneumatic cylinder accessories

Charnela female rear cylinder diameter 40

CF040

€8.98 (€7.42 tax excl.)

Aluminum rear female charnela for cylinder Ø40 ISO joints. Mounting on pneumatic cylinders.Reference: CF.040Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Pneumatic cylinder accessories

Front fixing flange diameter 50

FV050

€13.87 (€11.46 tax excl.)

Front flange for fixing a 50mm diameter pneumatic cylinder. For ISO standard cylinders, made of steel. This flange is valid for cylinders manufactured according to ISO 15552 - ISO 6431 of any brand. Reference: FV.050 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Charnela rear female for diameter cylinder 50 AIRON - adajusa.es

Pneumatic cylinder accessories

Charnela female rear cylinder diameter 50

CF050

€10.59 (€8.75 tax excl.)

Aluminum rear female charnela for cylinder Ø50 ISO joints. Mounting on pneumatic cylinders.Reference: CF.050Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Pack

Pneumatic cylinder accessories

Rear joint for cylinder diameter 50mm with axle

PK-CFPC50

€12.71 (€10.50 tax excl.)

Female rear joint for cylinder Ø50 manufactured according to ISO standard. Mounting on pneumatic cylinders. Made of aluminum. The supply includes the shaft.Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Rear joint male for diameter cylinder 50 AIRON - adajusa.es

Pneumatic cylinder accessories

Rear joint male cylinder diameter 50

CM050

€11.36 (€9.39 tax excl.)

Male rear joint for pneumatic cylinder diameter 50mm.Reference: CM.050Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Aluminum counter-frame for cylinder -50 AIRON - adajusa.es

Pneumatic cylinder accessories

Contracharnela aluminum cylinder diameter 50

AS050

€13.39 (€11.07 tax excl.)

Aluminum countercharnella for cylinder Ø50 ISO joints. Mounting on pneumatic cylinders.Reference: AS.050Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Aluminum cylinder countercharnella Ø40 - ADAJUSA

Pneumatic cylinder accessories

Contracharnela aluminum cylinder diameter 40

AS040

€12.25 (€10.12 tax excl.)

Aluminum countercharnella for cylinder Ø40 ISO joints. Mounting on pneumatic cylinders.Reference: AS.040Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Diameter shaft 40 for ISO AIRON articulation - adajusa.es

Pneumatic cylinder accessories

Diameter axis 40 for ISO joint

PC040

€2.03 (€1.68 tax excl.)

Shaft (bolt) diameter 40 to be mounted on ISO joints. Mounting on pneumatic cylinders. Reference: PC.040Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Rear joint male for diameter cylinder 40 AIRON - adajusa.es

Pneumatic cylinder accessories

Rear joint male cylinder diameter 40

CM040

€10.13 (€8.37 tax excl.)

Male rear joint for pneumatic cylinder diameter 40mm.Reference: CM.040Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Pack

Pneumatic cylinder accessories

Rear joint for cylinder diameter 40mm with axle

PK-CFPC40

€11.01 (€9.10 tax excl.)

Female rear joint for cylinder Ø40 manufactured according to ISO standard. Mounting on pneumatic cylinders. Made of aluminum. The supply includes the shaft.Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Squadron fixing cylinder diameter 80 - ADAJUSA

Pneumatic cylinder accessories

Fixing Squad cylinder diameter 80

PB080

€8.86 (€7.32 tax excl.)

Fixing Squad for pneumatic cylinder diameter 80mm. This fixing bracket is suitable for cylinders manufactured according to ISO 15552 - ISO 6431 of any brand. Reference: PB.080 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pneumatic cylinder accessories

Front fixing flange diameter 63

FV063

€15.73 (€13.00 tax excl.)

Front flange for fixing a 63mm diameter pneumatic cylinder. For ISO standard cylinders, made of steel. This flange is valid for cylinders manufactured according to ISO 15552 - ISO 6431 of any brand. Reference: FV.063 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pneumatic cylinder accessories

Front fixing flange diameter 80

FV080

€23.14 (€19.12 tax excl.)

Front flange for fixing pneumatic cylinder diameter 80mm. For ISO standard cylinders, made of steel. This flange is valid for cylinders manufactured according to ISO 15552 - ISO 6431 of any brand. Reference: FV.080 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pneumatic cylinder accessories

Front fixing flange diameter 100

FV100

€29.72 (€24.56 tax excl.)

Front flange for fixing a 100mm diameter pneumatic cylinder. For ISO standard cylinders, made of steel. This flange is valid for cylinders manufactured according to ISO 15552 - ISO 6431 of any brand. Reference: FV.100 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Cylinder fixing bracket diameter 63 AIRON - adajusa.es

Pneumatic cylinder accessories

Cylinder fixing Squad diameter 63

PB063

€6.56 (€5.42 tax excl.)

Fixing Squad for pneumatic cylinder diameter 63mm. This fixing bracket is suitable for cylinders manufactured according to ISO 15552 - ISO 6431 of any brand. Reference: PB.063 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Fixed squadron cylinder diameter 100 - ADAJUSA

Pneumatic cylinder accessories

Cylinder fixing Squad diameter 100

PB100

€11.87 (€9.81 tax excl.)

Fixing Squad for pneumatic cylinder diameter 100mm. This fixing bracket is suitable for cylinders manufactured according to ISO 15552 - ISO 6431 of any brand. Reference: PB.100 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Charnela rear female for diameter cylinder 80 AIRON - adajusa.es

Pneumatic cylinder accessories

Charnela female rear cylinder diameter 80

CF080

€16.88 (€13.95 tax excl.)

Aluminum rear female charnela for cylinder Ø80 ISO joints. Mounting on pneumatic cylinders.Reference: CF.080Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Aluminum front female charnela for cylinder adajusa

Pneumatic cylinder accessories

Rear female charnela for cylinder diameter 125

CF125

€38.70 (€31.98 tax excl.)

Aluminum rear female charnela for cylinder Ø125 ISO joints. Mounting on pneumatic cylinders.Reference: CF.125Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Pack

Pneumatic cylinder accessories

Rear joint for cylinder diameter 100mm with axle

PK-CFPC100

€26.70 (€22.07 tax excl.)

Female rear joint for cylinder Ø100 manufactured according to ISO standard. Mounting on pneumatic cylinders. Made of aluminum. The supply includes the shaft.Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Pack

Pneumatic cylinder accessories

Rear joint for cylinder diameter 80mm with axle

PK-CFPC80

€19.95 (€16.49 tax excl.)

Female rear joint for cylinder Ø80 manufactured according to ISO standard. Mounting on pneumatic cylinders. Made of aluminum. The supply includes the shaft.Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Pack

Pneumatic cylinder accessories

Rear joint for cylinder diameter 125mm with axle

PK-CFPC125

€45.39 (€37.51 tax excl.)

Female rear joint for cylinder Ø125 manufactured according to ISO standard. Mounting on pneumatic cylinders. Made of aluminum. The supply includes the shaft.Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Rear joint male for diameter cylinder 80 AIRON - adajusa.es

Pneumatic cylinder accessories

Rear joint male cylinder diameter 80

CM080

€17.92 (€14.81 tax excl.)

Male rear joint for pneumatic cylinder diameter 80mm.Reference: CM.080Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Rear joint male for diameter cylinder 100 AIRON - adajusa.es

Pneumatic cylinder accessories

Rear joint male cylinder diameter 100

CM100

€24.07 (€19.89 tax excl.)

Male rear joint for pneumatic cylinder diameter 100mm.Reference: CM.100Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Rear joint male for diameter cylinder 125 AIRON - adajusa.es

Pneumatic cylinder accessories

Rear joint male cylinder diameter 125

CM125

€41.33 (€34.16 tax excl.)

Male rear joint for pneumatic cylinder diameter 125mm.Reference: CM.125Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Pneumatic cylinder accessories

Diameter axis 80 for ISO joint

PC080

€3.07 (€2.54 tax excl.)

Shaft (bolt) Ø80 to be mounted on ISO joints. Mounting on pneumatic cylinders.Reference: PC.080Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Pneumatic cylinder accessories

Diameter axis 125 for ISO joint

PC125

€6.69 (€5.53 tax excl.)

Shaft (bolt) Ø125 to be mounted on ISO joints. Mounting on pneumatic cylinders.Reference: PC.125Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Aluminum counter-plate for cylinder -80 AIRON - adajusa.es

Pneumatic cylinder accessories

Countercharnela aluminum cylinder diameter 80

AS080

€20.72 (€17.12 tax excl.)

Aluminum countercharnella for cylinder Ø80 ISO joints. Mounting on pneumatic cylinders.Reference: AS.080Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Aluminum counter-plate for cylinder -100 AIRON - adajusa.es

Pneumatic cylinder accessories

Countercharnela aluminum cylinder diameter 100

AS100

€31.12 (€25.72 tax excl.)

Aluminum countercharnella for cylinder Ø100 ISO joints. Mounting on pneumatic cylinders.Reference: AS.100Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Pneumatic cylinder accessories

Aluminum countercharnella for cylinder diameter 125

AS125

€53.16 (€43.93 tax excl.)

Aluminum countercharnella for cylinder Ø125 ISO joints. Mounting on pneumatic cylinders.Reference: AS.125Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Pack

Pneumatic cylinder accessories

Rear joint for cylinder diameter 63mm with axle

PK-CFPC63

€15.92 (€13.16 tax excl.)

Female rear joint for cylinder Ø63 manufactured according to ISO standard. Mounting on pneumatic cylinders. Made of aluminum. The supply includes the shaft.Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Aluminum counter-plate for cylinder - adajusa.es

Pneumatic cylinder accessories

Countercharnela aluminum cylinder diameter 63

AS063

€19.19 (€15.86 tax excl.)

Aluminum countercharnella for cylinder Ø63 ISO joints. Mounting on pneumatic cylinders.Reference: AS.63Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Rear female charnela for diameter cylinder 63 AIRON - adajusa

Pneumatic cylinder accessories

Charnela female rear cylinder diameter 63

CF063

€13.03 (€10.77 tax excl.)

Aluminum rear female charnela for cylinder Ø63 ISO joints. Mounting on pneumatic cylinders.Reference: CF.063Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Diameter shaft 63 for ISO AIRON articulation - adajusa.es

Pneumatic cylinder accessories

Diameter axis 63 for ISO joint

PC063

€2.89 (€2.39 tax excl.)

Shaft (bolt) Ø63 to be mounted on ISO joints. Mounting on pneumatic cylinders.Reference: PC.063Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Squadron fixing cylinder diameter 50 - ADAJUSA

Pneumatic cylinder accessories

Fixing Squad for cylinder diameter 50

PB050

€5.63 (€4.65 tax excl.)

Fixing Squad for pneumatic cylinder diameter 50mm. This fixing bracket is suitable for cylinders manufactured according to ISO 15552 - ISO 6431 of any brand. Reference: PB.050 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pneumatic cylinder accessories

Front fixing flange diameter 125

FV125

€79.35 (€65.58 tax excl.)

Front flange for fixing a 125mm diameter pneumatic cylinder. For ISO standard cylinders, made of steel. This flange is valid for cylinders manufactured according to ISO 15552 - ISO 6431 of any brand. Reference: FV.125 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

View

Magnetic sensor reed 2 wires with cable 5m - ADAJUSA

Pneumatic cylinder accessories

2-wire magnetic reed sensor with 5m cable

SMT2DA5M

€20.93 (€17.30 tax excl.)

Magnetic sensor, magnetic detector, contacts type "reed" 2-wire, with 5m cable included. Valid for mounting on any cylinder with standard "T" type slot, such as ISO cylinders of the brands Metal Work, Mindman or Aignep.Reference: SMT.2D.A.5M Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Magnetic sensor hall PNP 3 wires with cable - ADAJUSA

Pneumatic cylinder accessories

Magnetic hall sensor PNP 3-wire with cable

SMTED

€26.92 (€22.25 tax excl.)

Magnetic sensor, magnetic detector, normally open (NO), with magnetic hall sensor and PNP transistor output, with 3-wire cable included. Cable length 3m. Valid for mounting on any cylinder with standard "T" type slot, such as ISO cylinders of the brands Metal Work, Mindman or Aignep. Part number: SMT.ED Representative image for illustrative purposes, the...

Magnetic sensor hall PNP (3 wires) connector - ADAJUSA

Pneumatic cylinder accessories

Magnetic hall sensor PNP 3-wire M8 connector

SMTEC

€35.77 (€29.56 tax excl.)

Magnetic sensor, magnetic detector, normally open (NO), with magnetic hall sensor and PNP transistor output, with 3-pin male M8 connector. Valid for mounting on any cylinder with standard "T" type slot, such as ISO cylinders of the brands Metal Work, Mindman or Aignep. Valid for mounting on ISO cylinders Metal Work, Mindman and Aignep, among...

Magnetic sensor reed (2 wires) connector M8 - Mindman - ADAJUSA

Pneumatic cylinder accessories

Magnetic reed sensor 2 wires 240Vac connector M8

SMT2CA

€26.92 (€22.25 tax excl.)

Magnetic sensor, magnetic detector, contacts 2-wire "reed" type, with 3-pin male M8 connector. This magnetic detector can work with voltages between 5 and 240Vac. Valid for mounting on any cylinder with standard "T" type slot, such as ISO cylinders of the brands Metal Work, Mindman or Aignep.Reference: SMT.2C.A Representative image for illustrative...

Magnetic sensor reed 2 wires with cable 3m - ADAJUSA

Pneumatic cylinder accessories

Magnetic reed sensor 2 wires with 3m cable

SMT2DA3M

€17.05 (€14.09 tax excl.)

Magnetic sensor, magnetic detector, contacts type "reed" 2-wire, with 5m cable included. Valid for mounting on any cylinder with standard "T" type slot, such as ISO cylinders of the brands Metal Work, Mindman or Aignep.Reference: SMT.2D Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Magnetic sensor reed 2 wire connector M8 - ADAJUSA

Pneumatic cylinder accessories

Magnetic reed sensor 2-wire M8 connector

SMT2C

€23.44 (€19.37 tax excl.)

Magnetic sensor, magnetic detector, contacts 2-wire "reed" type, with 3-pin male M8 connector. This magnetic detector can work with voltages between 5 and 120Vac. Valid for mounting on any cylinder with standard "T" type slot, such as ISO cylinders of the brands Metal Work, Mindman or Aignep. Part number: SMT.2C Representative image for illustrative...

Magnetic hall sensor NPN 3 wires with cable - ADAJUSA

Pneumatic cylinder accessories

Magnetic hall sensor NPN 3-wire with cable

SMTEND

€26.92 (€22.25 tax excl.)

Magnetic sensor, magnetic detector, normally open (NO), with magnetic hall sensor and NPN transistor output, with 3-wire cable included. Cable length 3m. Valid for mounting on any cylinder with standard "T" type slot, such as ISO cylinders of the brands Metal Work, Mindman or Aignep. Part number: SMT.END Representative image for illustrative purposes,...

Magnetic sensor hall NPN 3 wire connector M8 - ADAJUSA

Pneumatic cylinder accessories

Magnetic hall sensor NPN 3-wire M8 connector

SMTENC

€35.77 (€29.56 tax excl.)

Magnetic sensor, magnetic detector, normally open (NO), with magnetic hall sensor and NPN transistor output, with 3-pin male M8 connector. Valid for mounting on any cylinder with standard "T" type slot, such as ISO cylinders of the brands Metal Work, Mindman or Aignep. Valid for mounting on ISO cylinders Metal Work, Mindman and Aignep, among...

Pneumatic cylinder accessories

Ball joint rod diameter 125 M27x2 maintenance free

SS27

€68.10 (€56.28 tax excl.)

Ball joint for pneumatic cylinder rod diameter 125 mm. Type GA-M, maintenance-free. Reference: SS.27 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Showing 1-131 of 131 item(s)

List of products by supplier Generico-AIR

Client support

Company information

Your Account

Follow us in our social