Brackets and tensioners with bearings

Brackets and tensioners with mounted bearings (inserts), housings manufactured in function, stainless steel or plastic. Asian and European series. Wide variety and first brands.

INA-SNR-ISB

Foot support with cast bearings
Foot support with cast bearings
Reduced bridge supports with cast bearings
Reduced bridge supports with cast bearings
Oval support with cast bearings
Oval support with cast bearings
Square bracket with cast bearings
Square bracket with cast bearings
Round support with cast iron bearings
Round support with cast iron bearings
Tension support with cast iron bearings
Tension support with cast iron bearings
Foot supports with bearings in stamped sheet metal
Foot supports with bearings in stamped sheet metal
Oval flange housings with stamped sheet metal bearings
Oval flange housings with stamped sheet metal bearings
round flange housings with stamped sheet metal bearings
round flange housings with stamped sheet metal bearings
Triangular flange supports with bearings in stamped sheet metal
Triangular flange supports with bearings in stamped sheet metal
Foot supports with stainless steel bearings in thermoplastic
Foot supports with stainless steel bearings in thermoplastic
Oval supports with stainless steel bearings in thermoplastic
Oval supports with stainless steel bearings in thermoplastic
Square supports with stainless steel bearings in thermoplastic
Square supports with stainless steel bearings in thermoplastic
Round supports with stainless steel bearings in thermoplastic
Round supports with stainless steel bearings in thermoplastic
Tension supports with stainless steel bearings in thermoplastic
Tension supports with stainless steel bearings in thermoplastic
Flange supports with stainless steel bearings in thermoplastic
Flange supports with stainless steel bearings in thermoplastic
Foot supports with stainless steel bearings
Foot supports with stainless steel bearings
Reduced bridge supports with stainless steel bearings
Reduced bridge supports with stainless steel bearings
Oval supports with stainless steel bearings
Oval supports with stainless steel bearings
Square supports with stainless steel bearings
Square supports with stainless steel bearings
Round supports with INOX bearings
Round supports with INOX bearings
Tension supports with INOX bearings
Tension supports with INOX bearings
Flange supports with INOX bearings
Flange supports with INOX bearings
Foot supports with bearings - Light aluminum alloy series
Foot supports with bearings - Light aluminum alloy series
Oval Bearing Brackets - Lightweight Aluminum Alloy Series
Oval Bearing Brackets - Lightweight Aluminum Alloy Series
Brackets and tensioners with bearings

Square bracket with shaft bearing 35mm UCF207 - ISB

UCF207-ISB
€12.52 (€10.35 tax excl.)
Square casting bracket with UCF207 inserted bearing for 35mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF207 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 40mm UCF208 - ISB

UCF208-ISB
€15.25 (€12.60 tax excl.)
Square casting bracket with UCF208 inserted bearing for 40mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF208 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 45mm UCF209 - ISB

UCF209-ISB
€17.82 (€14.73 tax excl.)
Square casting bracket with UCF209 inserted bearing for 45mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF2091 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 50mm UCF210 - ISB

UCF210-ISB
€21.11 (€17.45 tax excl.)
Square casting bracket with UCF210 inserted bearing for 50mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF210 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 55mm UCF211 - ISB

UCF211-ISB
€25.63 (€21.18 tax excl.)
Square casting bracket with UCF211 inserted bearing for 55mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF211 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 60mm UCF212 - ISB

UCF212-ISB
€40.70 (€33.64 tax excl.)
Square casting bracket with UCF212 inserted bearing for 60mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF212 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 65mm UCF213 - ISB

UCF213-ISB
€45.68 (€37.75 tax excl.)
Square casting bracket with UCF213 inserted bearing for 65mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF213 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 70mm UCF214 - ISB

UCF214-ISB
€54.98 (€45.44 tax excl.)
Square casting bracket with UCF214 inserted bearing for 70mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF214 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 75mm UCF215 - ISB

UCF215-ISB
€63.84 (€52.76 tax excl.)
Square casting bracket with UCF215 inserted bearing for 75mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF215 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 80mm UCF216 - ISB

UCF216-ISB
€102.04 (€84.33 tax excl.)
Square casting bracket with UCF216 inserted bearing for 80mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF216 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 85mm UCF217 - ISB

UCF217-ISB
€108.74 (€89.87 tax excl.)
Square casting bracket with UCF217 inserted bearing for 85mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF217 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 90mm UCF218 - ISB

UCF218-ISB
€167.65 (€138.55 tax excl.)
Square casting bracket with UCF218 inserted bearing for 90mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF218 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 25mm UCF305 - ISB

UCF305-ISB
€19.31 (€15.96 tax excl.)
Square casting bracket with UCF305 inserted bearing for 25mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF305 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 30mm UCF306 - ISB

UCF306-ISB
€24.49 (€20.24 tax excl.)
Square casting bracket with UCF306 inserted bearing for 30mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF306 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 35mm UCF307 - ISB

UCF307-ISB
€30.31 (€25.05 tax excl.)
Square casting bracket with UCF307 inserted bearing for 35mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF307 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 40mm UCF308 - ISB

UCF308-ISB
€36.30 (€30.00 tax excl.)
Square casting bracket with UCF308 inserted bearing for 40mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF308 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 45mm UCF309 - ISB

UCF309-ISB
€55.71 (€46.04 tax excl.)
Square casting bracket with UCF309 inserted bearing for 45mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF309 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 50mm UCF310 - ISB

UCF310-ISB
€59.88 (€49.49 tax excl.)
Square casting bracket with UCF310 inserted bearing for 50mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF310 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 55mm UCF311 - ISB

UCF311-ISB
€86.35 (€71.36 tax excl.)
Square casting bracket with UCF311 inserted bearing for 55mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF311 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 60mm UCF312 - ISB

UCF312-ISB
€105.94 (€87.55 tax excl.)
Square casting bracket with UCF312 inserted bearing for 60mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF312 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 65mm UCF313 - ISB

UCF313-ISB
€124.55 (€102.93 tax excl.)
Square casting bracket with UCF313 inserted bearing for 65mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF313 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 70mm UCF314 - ISB

UCF314-ISB
€145.64 (€120.36 tax excl.)
Square casting bracket with UCF314 inserted bearing for 70mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF314 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 75mm UCF315 - ISB

UCF315-ISB
€173.97 (€143.78 tax excl.)
Square casting bracket with UCF315 inserted bearing for 75mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF315 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 80mm UCF316 - ISB

UCF316-ISB
€235.95 (€195.00 tax excl.)
Square casting bracket with UCF316 inserted bearing for 80mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF316 Representative image...
Oval bracket with shaft bearing 12mm FLCTE12 - INA Oval bracket with shaft bearing 12mm FLCTE12 - INA 2
Brackets and tensioners with bearings

Oval support with 12mm shaft bearing FLCTE12-XL - INA

FLCTE12-INA
€33.02 (€27.29 tax excl.)
Oval cast iron support with inserted FLCTE12 bearing for 12mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Fixing to the shaft using eccentric ring...
Oval bracket with shaft bearing 20mm PCJT20-XL-N INA
Brackets and tensioners with bearings

Oval support with 20mm axle bearing PCJT20-XL-N - INA

PCJT20-INA
€33.44 (€27.64 tax excl.)
Oval cast iron support with inserted PCJT20 bearing for 20mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Fixing to the shaft using eccentric ring...
Oval bracket with shaft bearing 20mm PCJTY20-XL-N INA
Brackets and tensioners with bearings

Oval support with 20mm shaft bearing PCJTY20-XL-N - INA

PCJTY20-INA
€32.23 (€26.64 tax excl.)
Oval cast iron support with PCJTY20 inserted bearing for 20mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects.   Manufacturer: INA Reference:...
Oval bracket with shaft bearing 20mm PCJ20-XL-N INA
Brackets and tensioners with bearings

Square support with 20mm axle bearing PCJ20-XL-N - INA

PCJ20-INA
€36.82 (€30.43 tax excl.)
Square cast iron support with inserted PCJ20 bearing for 20mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Fixing to the shaft using eccentric ring...
Oval bracket with shaft...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 65mm UCFL213 - SNR

UCFL213-SNR
€110.64 (€91.44 tax excl.)
Oval cast iron bracket with UCFL213 inserted bearing for 65mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Manufacturer: SNR Reference: UCFL213...
Oval bracket with shaft...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 90mm UCFL218 - SNR

UCFL218-SNR
€281.74 (€232.84 tax excl.)
Oval cast iron bracket with UCFL218 inserted bearing for 90mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Manufacturer: SNR Reference: UCFL218...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 15mm UCFL202 - ISB

UCFL202-ISB
€7.77 (€6.42 tax excl.)
Oval cast iron bracket with UCFL202 inserted bearing for 15mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCFL202 Representative image...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 17mm UCFL203 - ISB

UCFL203-ISB
€7.88 (€6.51 tax excl.)
Oval cast iron bracket with UCFL203 inserted bearing for 17mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCFL203 Representative image...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 30mm UCFL206 - ISB

UCFL206-ISB
€10.16 (€8.40 tax excl.)
Cast oval housing with UCFL206 inserted bearing for 30mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCFL206 Representative image for...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 35mm UCFL207 - ISB

UCFL207-ISB
€12.16 (€10.05 tax excl.)
Cast oval housing with UCFL207 inserted bearing for 35mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCFL207 Representative image for...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 40mm UCFL208 - ISB

UCFL208-ISB
€15.25 (€12.60 tax excl.)
Oval cast iron bracket with UCFL208 inserted bearing for 40mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCFL208 Representative image...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 45mm UCFL209 - ISB

UCFL209-ISB
€17.82 (€14.73 tax excl.)
Oval cast iron bracket with UCFL209 inserted bearing for 45mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCFL209 Representative image...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 55mm UCFL211 - ISB

UCFL211-ISB
€29.20 (€24.13 tax excl.)
Cast oval housing with UCFL211 inserted bearing for 55mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCFL211 Representative image for...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 60mm UCFL212 - ISB

UCFL212-ISB
€34.47 (€28.49 tax excl.)
Cast oval housing with UCFL212 inserted bearing for 60mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCFL212 Representative image for...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 65mm UCFL213 - ISB

UCFL213-ISB
€45.68 (€37.75 tax excl.)
Oval cast iron bracket with UCFL213 inserted bearing for 65mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCFL213 Representative image...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 70mm UCFL214 - ISB

UCFL214-ISB
€54.98 (€45.44 tax excl.)
Cast oval housing with UCFL214 inserted bearing for 70mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCFL214 Representative image for...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 75mm UCFL215 - ISB

UCFL215-ISB
€72.03 (€59.53 tax excl.)
Cast oval housing with UCFL215 inserted bearing for 75mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCFL215 Representative image for...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 80mm UCFL216 - ISB

UCFL216-ISB
€102.04 (€84.33 tax excl.)
Oval cast iron bracket with UCFL216 inserted bearing for 80mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCFL216 Representative image...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 90mm UCFL218 - ISB

UCFL218-ISB
€167.65 (€138.55 tax excl.)
Oval cast iron bracket with UCFL218 inserted bearing for 90mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCFL218 Representative image...
Oval bracket with shaft...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 15mm FLCTE15-XL - INA

FLCTE15-INA
€33.15 (€27.40 tax excl.)
Oval casting bracket with FLCTE15 inserted bearing for 15mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Attachment to the shaft by eccentric ring...
Oval bracket with shaft...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 17mm FLCTE17-XL - INA

FLCTE17-INA
€33.25 (€27.48 tax excl.)
Oval casting bracket with FLCTE17 inserted bearing for 17mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Attachment to the shaft by eccentric ring...
Oval bracket with shaft...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 20mm FLCTE20-XL - INA

FLCTE20-INA
€35.07 (€28.98 tax excl.)
Oval casting bracket with FLCTE20 inserted bearing for 20mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Attachment to the shaft by eccentric ring...
Oval bracket with shaft...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 25mm FLCTE25-XL - INA

FLCTE25-INA
€38.28 (€31.64 tax excl.)
Oval casting bracket with FLCTE25 inserted bearing for 25mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Attachment to the shaft by eccentric ring...
Oval bracket with shaft...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 30mm FLCTE30-XL - INA

FLCTE30-INA
€45.94 (€37.97 tax excl.)
Oval casting bracket with FLCTE30 inserted bearing for 30mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Attachment to the shaft by eccentric ring...
Oval bracket with shaft...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 35mm FLCTE35-XL - INA

FLCTE35-INA
€54.26 (€44.84 tax excl.)
Oval cast iron bracket with FLCTE35 inserted bearing for 35mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Attachment to the shaft by eccentric ring...
Oval bracket with shaft...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 40mm FLCTE40-XL - INA

FLCTE40-INA
€63.27 (€52.29 tax excl.)
Oval casting bracket with FLCTE40 inserted bearing for 40mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Attachment to the shaft by eccentric ring...
Oval bracket with shaft...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 25mm PCJT25-XL-N - INA

PCJT25-INA
€37.85 (€31.28 tax excl.)
Oval cast iron bracket with PCJT25 inserted bearing for 25mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Attachment to the shaft by eccentric ring...
Oval bracket with shaft...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 30mm PCJT30-XL-N - INA

PCJT30-INA
€44.92 (€37.12 tax excl.)
Cast oval housing with PCJT30 inserted bearing for 30mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Attachment to the shaft by eccentric ring and...
Oval bracket with shaft...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 35mm PCJT35-XL-N - INA

PCJT35-INA
€52.84 (€43.67 tax excl.)
Cast oval housing with PCJT35 inserted bearing for 35mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Attachment to the shaft by eccentric ring and...
Oval bracket with shaft...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 40mm PCJT40-XL-N - INA

PCJT40-INA
€61.56 (€50.88 tax excl.)
Cast oval housing with PCJT40 inserted bearing for 40mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Attachment to the shaft by eccentric ring and...
Oval bracket with shaft...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 50mm PCJT50-XL-N - INA

PCJT50-INA
€90.81 (€75.05 tax excl.)
Oval casting bracket with PCJT50 inserted bearing for 50mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Attachment to the shaft by eccentric ring...
Oval bracket with shaft...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 25mm PCJTY25-XL-N - INA

PCJTY25-INA
€37.01 (€30.59 tax excl.)
Cast oval housing with PCJTY25 inserted bearing for 25mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Manufacturer: INA Reference: PCJTY25-XL-N...
Oval bracket with shaft...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 35mm PCJTY35-XL-N - INA

PCJTY35-INA
€51.28 (€42.38 tax excl.)
Cast oval housing with PCJTY35 inserted bearing for 35mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Manufacturer: INA Reference: PCJTY35-XL-N...
Oval bracket with shaft...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 45mm PCJTY45-XL-I - INA

PCJTY45-INA
€68.57 (€56.67 tax excl.)
Cast oval housing with PCJTY45 inserted bearing for 45mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Manufacturer: INA Reference: PCJTY45-XL-N...
Oval bracket with shaft...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 50mm PCJTY50-XL-N - INA

PCJTY50-INA
€80.05 (€66.16 tax excl.)
Cast oval housing with PCJTY50 inserted bearing for 50mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Manufacturer: INA Reference: PCJTY50-XL-N...
Oval bracket with shaft...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 60mm PCJTY60-XL-N - INA

PCJTY60-INA
€138.25 (€114.26 tax excl.)
Cast oval housing with PCJTY60 inserted bearing for 60mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Manufacturer: INA Reference: PCJTY60-XL-N...
Square bracket with shaft...
Brackets and tensioners with bearings

Square bracket with shaft bearing 25mm PCJ25-XL-N - INA

PCJ25-INA
€37.85 (€31.28 tax excl.)
Square casting bracket with PCJ25 inserted bearing for 25mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Attachment to the shaft by eccentric ring...
Square bracket with shaft...
Brackets and tensioners with bearings

Square bracket with shaft bearing 30mm PCJ30-XL-N - INA

PCJ30-INA
€44.92 (€37.12 tax excl.)
Square casting bracket with PCJ30 inserted bearing for 30mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Attachment to the shaft by eccentric ring...
Square bracket with shaft...
Brackets and tensioners with bearings

Square bracket with shaft bearing 35mm PCJ35-XL-N - INA

PCJ35-INA
€52.84 (€43.67 tax excl.)
Square casting bracket with PCJ35 inserted bearing for 35mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Attachment to the shaft by eccentric ring...
Square bracket with shaft...
Brackets and tensioners with bearings

Square bracket with shaft bearing 40mm PCJ40-XL-N - INA

PCJ40-INA
€61.56 (€50.88 tax excl.)
Square casting bracket with PCJ40 inserted bearing for 40mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Attachment to the shaft by eccentric ring...
Square bracket with shaft...
Brackets and tensioners with bearings

Square bracket with shaft bearing 45mm PCJ45-XL - INA

PCJ45-INA
€73.31 (€60.59 tax excl.)
Square casting bracket with PCJ45 inserted bearing for 45mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Attachment to the shaft by eccentric ring...
Square bracket with shaft...
Brackets and tensioners with bearings

Square bracket with shaft bearing 50mm PCJ50-XL-N - INA

PCJ50-INA
€82.49 (€68.17 tax excl.)
Square casting bracket with PCJ50 inserted bearing for 50mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Attachment to the shaft by eccentric ring...
Square bracket with shaft...
Brackets and tensioners with bearings

Square bracket with shaft bearing 55mm PCJ55-XL-N - INA

PCJ55-INA
€115.35 (€95.33 tax excl.)
Square casting bracket with PCJ55 inserted bearing for 55mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Attachment to the shaft by eccentric ring...
Square bracket with shaft...
Brackets and tensioners with bearings

Square bracket with shaft bearing 60mm PCJ60-XL-N - INA

PCJ60-INA
€131.83 (€108.95 tax excl.)
Square casting bracket with PCJ60 inserted bearing for 60mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Attachment to the shaft by eccentric ring...
Square bracket with shaft...
Brackets and tensioners with bearings

Square bracket with shaft bearing 25mm PCJY25-XL-N - INA

PCJY25-INA
€38.18 (€31.55 tax excl.)
Square casting bracket with PCJY25 inserted bearing for 25mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Manufacturer: INA Reference: PCJY25-XL-N...
Square bracket with shaft...
Brackets and tensioners with bearings

Square bracket with shaft bearing 30mm PCJY30-XL-N - INA

PCJY30-INA
€45.58 (€37.67 tax excl.)
Square casting bracket with PCJY30 inserted bearing for 30mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Manufacturer: INA Reference: PCJY30-XL-N...
Square bracket with shaft...
Brackets and tensioners with bearings

Square bracket with shaft bearing 35mm PCJY35-XL-N - INA

PCJY35-INA
€52.90 (€43.72 tax excl.)
Square casting bracket with PCJY35 inserted bearing for 35mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Manufacturer: INA Reference: PCJY35-XL-N...
Square bracket with shaft...
Brackets and tensioners with bearings

Square bracket with shaft bearing 40mm PCJY40-XL-N - INA

PCJY40-INA
€60.73 (€50.19 tax excl.)
Square casting bracket with PCJY40 inserted bearing for 40mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Manufacturer: INA Reference: PCJY40-XL-N...
Square bracket with shaft...
Brackets and tensioners with bearings

Square bracket with shaft bearing 45mm PCJY45-XL-N - INA

PCJY45-INA
€70.75 (€58.47 tax excl.)
Square casting bracket with PCJY45 inserted bearing for 45mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Manufacturer: INA Reference: PCJY45-XL-N...
Square bracket with shaft...
Brackets and tensioners with bearings

Square bracket with shaft bearing 50mm PCJY50-XL-N - INA

PCJY50-INA
€82.59 (€68.26 tax excl.)
Square casting bracket with PCJY50 inserted bearing for 50mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Manufacturer: INA Reference: PCJY50-XL-N...
Square bracket with shaft...
Brackets and tensioners with bearings

Square bracket with shaft bearing 60mm PCJY60-XL-N - INA

PCJY60-INA
€138.25 (€114.26 tax excl.)
Square casting bracket with PCJY60 inserted bearing for 60mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Manufacturer: INA Reference: PCJY60-XL-N...
Vertical support in stamped sheet metal BPP with SA201 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Stamped sheet metal foot support with bearing SA201-2RS 12mm shaft - ISB

BPP121517-SA201-ISB
€7.04 (€5.82 tax excl.)
Stamped sheet steel support or bridge type with eccentric bearing insert, for 12mm diameter shaft. Self-aligning support with single-row ball bearing, single-sided collar and eccentric ring fixing, made of steel with two rubber sealing caps (2RS) for closure. Allows to compensate alignment defects Part no.: BPP-12-15-17 + SA201-2RS Representative image...
Vertical support in stamped sheet metal BPP with SA201 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Stamped sheet metal foot support with bearing SB201-2RS shaft 12mm - ISB

BPP121517-SB201-ISB
€6.16 (€5.09 tax excl.)
Stamped sheet metal support or bridge type with bearing insert, for 12mm diameter shaft. Self-aligning support with single-row ball bearing, single-sided collar and grub screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPP-12-15-17 + SB201-2RS Representative image for illustrative...
Vertical support in stamped sheet metal BPP with SA202 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Stamped sheet metal foot support with bearing SA202-2RS shaft 15mm - ISB

BPP121517-SA202-ISB
€7.15 (€5.91 tax excl.)
Stamped sheet steel support or bridge type with eccentric bearing insert, for 15mm diameter shaft. Self-aligning support with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for locking. Allows to compensate alignment defects Part no.: BPP-12-15-17 + SA202-2RS Representative...
Vertical support in stamped sheet metal BPP with bearing SA203 | Adajusa
  • Pack
Brackets and tensioners with bearings

Stamped sheet metal foot support with SA203-2RS bearing - 17mm shaft ISB

BPP121517-SA203-ISB
€7.30 (€6.03 tax excl.)
Stamped sheet steel support or bridge type with eccentric bearing insert, for 17mm diameter shaft. Self-aligning support with single-row ball bearing, single-sided collar and eccentric ring fixing, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPP-12-15-17 + SA203-2RS Representative image...
Vertical support in stamped sheet metal BPP with bearing SA203 | Adajusa
  • Pack
Brackets and tensioners with bearings

Stamped sheet metal foot bracket with SA204-2RS bearing - 20mm shaft ISB

BPP20-SA204-ISB
€7.61 (€6.29 tax excl.)
Stamped sheet steel support or bridge type with eccentric bearing insert, for 20mm diameter shaft. Self-aligning support with single-row ball bearing, single-sided collar and eccentric ring fixing, made of steel with two rubber sealing caps (2RS) for closing. Allows to compensate alignment defects Part no.: BPP-20 + SA204-2RS Representative image for...
Vertical support in stamped sheet metal BPP with bearing SA203 | Adajusa
  • Pack
Brackets and tensioners with bearings

Stamped sheet metal foot bracket with bearing SA205-2RS 25mm shaft - ISB

BPP25-SA205-ISB
€9.63 (€7.96 tax excl.)
Stamped sheet steel support or bridge type with eccentric bearing insert, for 25mm diameter shaft. Self-aligning support with single-row ball bearing, single-sided collar and eccentric ring fixing, made of steel with two rubber sealing caps (2RS) for closure. Allows to compensate alignment defects Part no.: BPP-25 + SA205-2RS Representative image for...
Vertical support in stamped sheet metal BPP with SA206 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Stamped sheet metal foot support with bearing SA206-2RS shaft 30mm - ISB

BPP30-SA206-ISB
€12.08 (€9.98 tax excl.)
Stamped sheet steel support or bridge type with eccentric bearing insert, for 30mm diameter shaft. Self-aligning support with single-row ball bearing, single-sided collar and eccentric ring fixing, made of steel with two rubber sealing caps (2RS) for closure. Allows to compensate alignment defects Part no.: BPP-30 + SA206-2RS Representative image for...
Stamped sheet metal vertical support BPP with SA207 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Stamped sheet metal foot support with bearing SA207-2RS shaft 35mm - ISB

BPP35-SA207-ISB
€13.09 (€10.82 tax excl.)
Stamped sheet steel support or bridge type with eccentric bearing insert, for 35mm diameter shaft. Self-aligning support with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for locking. Allows to compensate alignment defects Part No.: BPP-35 + SA207-2RS Representative image for...
Stamped sheet metal vertical support BPP with SA208 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Stamped sheet metal foot bracket with SA208-2RS bearing - 40mm shaft ISB

BPP40-SA208-ISB
€18.95 (€15.66 tax excl.)
Stamped sheet steel support or bridge type with eccentric bearing insert, for 40mm diameter shaft. Self-aligning support with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for closure. Allows to compensate alignment defects Part no.: BPP-40 + SA208-2RS Representative image for...
Stamped sheet metal vertical support BPP with SA202 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Stamped sheet metal foot bracket with bearing SB202-2RS shaft 15mm - ISB

BPP121517-SB202-ISB
€6.18 (€5.11 tax excl.)
Stamped sheet metal support or bridge type with bearing insert, for 15mm diameter shaft. Self-aligning support with single-row ball bearing, single-sided collar and grub screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPP-12-15-17 + SB202-2RS Representative image for illustrative...
Stamped sheet metal vertical support BPP with SA203 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Stamped sheet metal foot support with bearing SB203-2RS - 17mm shaft ISB

BPP121517-SB203-ISB
€6.45 (€5.33 tax excl.)
Stamped sheet metal support or bridge type with bearing insert, for 17mm diameter shaft. Self-aligning support with single-row ball bearing, single-sided collar and grub screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPP-12-15-17 + SB203-2RS Representative image for illustrative...
Stamped sheet metal vertical support BPP with SA204 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Stamped sheet metal foot bracket with bearing SB204-2RS 20mm shaft - ISB

BPP20-SB204-ISB
€6.84 (€5.65 tax excl.)
Stamped sheet metal support or bridge type with bearing insert, for 20mm diameter shaft. Self-aligning support with single-row ball bearing, single-sided collar and grub screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPP-20 + SB204-2RS Representative image for illustrative...
Vertical support in stamped sheet metal BPP with SA205 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Stamped sheet metal foot bracket with bearing SB205-2RS shaft 25mm - ISB

BPP25-SB205-ISB
€7.24 (€5.98 tax excl.)
Stamped sheet metal support or bridge type with bearing insert, for 25mm diameter shaft. Self-aligning support with single-row ball bearing, single-sided collar and grub screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPP-25 + SB205-2RS Representative image for illustrative purposes,...
Vertical support in stamped sheet metal BPP with SA206 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Stamped sheet metal foot bracket with bearing SB206-2RS shaft 30mm - ISB

BPP30-SB206-ISB
€10.77 (€8.90 tax excl.)
Stamped sheet metal support or bridge type with bearing insert, for 30mm diameter shaft. Self-aligning support with single-row ball bearing, single-sided collar and grub screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPP-30 + SB206-2RS Representative image for illustrative...
Stamped sheet metal vertical support BPP with SA207 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Stamped sheet metal foot bracket with bearing SB207-2RS 35mm shaft - ISB

BPP35-SB207-ISB
€11.66 (€9.64 tax excl.)
Stamped sheet metal support or bridge type with bearing insert, for 35mm diameter shaft. Self-aligning support with single-row ball bearing, single-sided collar and grub screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part No.: BPP-35 + SB207-2RS Representative image for illustrative purposes,...
Stamped sheet metal vertical support BPP with SA208 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Stamped sheet metal foot support with SB208-2RS bearing - 40mm shaft ISB

BPP40-SB208-ISB
€19.34 (€15.98 tax excl.)
Stamped sheet metal support or bridge type with bearing insert, for 40mm diameter shaft. Self-aligning support with single-row ball bearing, single-sided collar and grub screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPP-40 + SB208-2RS Representative image for illustrative purposes,...
Round support in stamped sheet metal BPP with SA201 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Round support in stamped sheet metal with bearing SA201-2RS shaft 12mm - ISB

BPF121517-SA201-ISB
€7.18 (€5.93 tax excl.)
Round housing in stamped sheet metal with eccentric bearing insert, for 12mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring fixing, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPF-12-15-17 + SA201-2RS Representative image for...
BPF stamped sheet metal round support with SA201 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Round support in stamped sheet metal with bearing SB201-2RS shaft 12mm - ISB

BPF121517-SB201-ISB
€6.29 (€5.20 tax excl.)
Round housing in stamped sheet metal with bearing insert, for 12mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and set screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPF-12-15-17 + SB201-2RS Representative image for illustrative purposes,...
Round support in stamped sheet metal BPP with SA202 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Round support in stamped sheet metal with bearing SA202-2RS shaft 15mm - ISB

BPF121517-SA202-ISB
€7.28 (€6.02 tax excl.)
Round housing in stamped sheet metal with eccentric bearing insert, for 15mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defectsPart no.: BPF-12-15-17 + SA202-2RS Representative image for...
Stamped sheet metal round support BPP with bearing SA203 | Adajusa
  • Pack
Brackets and tensioners with bearings

Round support in stamped sheet metal with bearing SA203-2RS shaft 17mm - ISB

BPF121517-SA203-ISB
€7.43 (€6.14 tax excl.)
Round housing in stamped sheet metal with eccentric bearing insert, for shaft diameter 17mm. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPF-12-15-17 + SA203-2RS Representative image for...
Stamped sheet metal round support BPP with bearing SA203 | Adajusa
  • Pack
Brackets and tensioners with bearings

Round support in stamped sheet metal with bearing SA204-2RS 20mm shaft - ISB

BPF20-SA204-ISB
€8.08 (€6.68 tax excl.)
Round housing in stamped sheet metal with eccentric bearing insert, for shaft diameter 20mm. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPF-20 + SA204-2RS Representative image for...
BPF stamped sheet metal round support with SA205 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Round support in stamped sheet metal with bearing SA205-2RS shaft 25mm - ISB

BPF25-SA205-ISB
€10.09 (€8.34 tax excl.)
Round housing in stamped sheet metal with eccentric bearing insert, for 25mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPF-25 + SA205-2RS Representative image for...
BPF stamped sheet metal round bracket with SA206 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Round support in stamped sheet metal with bearing SA206-2RS shaft 30mm - ISB

BPF30-SA206-ISB
€13.44 (€11.11 tax excl.)
Round housing in stamped sheet metal with eccentric bearing insert, for shaft diameter 30mm. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPF-30 + SA206-2RS Representative image for...
BPF stamped sheet metal round bracket with bearing SA207 | Adajusa
  • Pack
Brackets and tensioners with bearings

Round support in stamped sheet metal with bearing SA207-2RS shaft 35mm - ISB

BPF35-SA207-ISB
€14.41 (€11.91 tax excl.)
Round housing in stamped sheet metal with eccentric bearing insert, for 35 mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part No.: BPF-35 + SA207-2RS Representative image for...
BPF stamped sheet metal round bracket with SA208 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Round support in stamped sheet metal with bearing SA208-2RS shaft 40mm - ISB

BPF40-SA208-ISB
€23.30 (€19.26 tax excl.)
Round housing in stamped sheet metal with eccentric bearing insert, for 40 mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPF-40 + SA208-2RS Representative image for...
BPF stamped sheet metal round support with bearing SA202 | Adajusa
  • Pack
Brackets and tensioners with bearings

Round support in stamped sheet metal with bearing SB202-2RS - 15mm shaft ISB

BPF121517-SB202-ISB
€6.32 (€5.22 tax excl.)
Round housing in stamped sheet metal with bearing insert, for 15mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and set screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPF-12-15-17 + SB202-2RS Representative image for illustrative purposes,...
BPF stamped sheet metal round support with bearing SA203 | Adajusa
  • Pack
Brackets and tensioners with bearings

Round support in stamped sheet metal with bearing SB203-2RS - 17mm shaft ISB

BPF121517-SB203-ISB
€6.58 (€5.44 tax excl.)
Round housing in stamped sheet metal with bearing insert, for 17mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and set screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPF-12-15-17 + SB203-2RS Representative image for illustrative purposes,...
BPF stamped sheet metal round bracket with SA204 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Round support in stamped sheet metal with bearing SB204-2RS 20mm shaft - ISB

BPF20-SB204-ISB
€7.31 (€6.04 tax excl.)
Round housing in stamped sheet metal with bearing insert, for 20mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and set screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPF-20 + SB204-2RS Representative image for illustrative purposes, the...
BPF stamped sheet metal round support with SA205 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Round support in stamped sheet metal with bearing SB205-2RS - 25mm shaft ISB

BPF25-SB205-ISB
€7.70 (€6.36 tax excl.)
Round housing in stamped sheet metal with bearing insert, for 25mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and grub screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPF-25 + SB205-2RS Representative image for illustrative purposes, the...
BPF stamped sheet metal round bracket with SA206 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Round support in stamped sheet metal with bearing SB206-2RS shaft 30mm - ISB

BPF30-SB206-ISB
€12.14 (€10.03 tax excl.)
Round housing in stamped sheet metal with bearing insert, for shaft diameter 30mm. Self-aligning housing with single-row ball bearing, single-sided collar and set screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPF-30 + SB206-2RS Representative image for illustrative purposes, the...
BPF stamped sheet metal round bracket with bearing SA207 | Adajusa
  • Pack
Brackets and tensioners with bearings

Stamped sheet metal round support with SB207-2RS bearing - 35mm shaft ISB

BPF35-SB207-ISB
€12.98 (€10.73 tax excl.)
Round housing in stamped sheet metal with bearing insert, for 35 mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and set screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part No.: BPF-35 + SB207-2RS Representative image for illustrative purposes, the...
BPF stamped sheet metal round bracket with SA208 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Round support in stamped sheet metal with bearing SB208-2RS - 40mm shaft ISB

BPF40-SB208-ISB
€23.30 (€19.26 tax excl.)
Round housing in stamped sheet metal with bearing insert, for 40 mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and set screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPF-40 + SB208-2RS Representative image for illustrative purposes, the...
Oval support in stamped sheet metal BPFL with SA201 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Oval support in stamped sheet metal with bearing SA201-2RS 12mm shaft - ISB

BPFL121517-SA201-ISB
€6.87 (€5.68 tax excl.)
Oval housing in stamped sheet metal with eccentric bearing insert, for 12mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPFL-12-15-17 + SA201-2RS Representative image for...
BPFL stamped sheet metal round bracket with SB201 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Oval support in stamped sheet metal with bearing SB201-2RS shaft 12mm - ISB

BPFL121517-SB201-ISB
€5.99 (€4.95 tax excl.)
Oval housing in stamped sheet metal with bearing insert, for 12mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and set screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPFL-12-15-17 + SB201-2RS Representative image for illustrative purposes,...
BPFL stamped sheet metal oval housing with SA202 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Oval support in stamped sheet metal with bearing SA202-2RS shaft 15mm - ISB

BPFL121517-SA202-ISB
€6.98 (€5.77 tax excl.)
Oval housing in stamped sheet metal with eccentric bearing insert, for 15mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring fixing, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPFL-12-15-17 + SA202-2RS Representative image for...
Oval support in stamped sheet metal BPFL with SA203 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Oval support in stamped sheet metal with SA203-2RS bearing - 17mm shaft ISB

BPFL121517-SA203-ISB
€7.13 (€5.89 tax excl.)
Oval housing in stamped sheet metal with eccentric bearing insert, for shaft diameter 17mm. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPFL-12-15-17 + SA203-2RS Representative image for...
Oval support in stamped sheet metal BPFL with SA204 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Oval support in stamped sheet metal with SA204-2RS bearing - 20mm shaft ISB

BPFL20-SA204-ISB
€7.28 (€6.02 tax excl.)
Oval housing in stamped sheet metal with eccentric bearing insert, for 20mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPFL-20 + SA204-2RS Representative image for...
BPFL stamped sheet metal oval housing with SA205 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Oval support in stamped sheet metal with bearing SA205-2RS shaft 25mm - ISB

BPFL25-SA205-ISB
€9.49 (€7.84 tax excl.)
Oval housing in stamped sheet metal with eccentric bearing insert, for 25mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPFL-25 + SA205-2RS Representative image for...
Oval support in stamped sheet metal BPFL with bearing SA206 | Adajusa
  • Pack
Brackets and tensioners with bearings

Oval support in stamped sheet metal with bearing SA206-2RS shaft 30mm - ISB

BPFL30-SA206-ISB
€11.45 (€9.46 tax excl.)
Oval housing in stamped sheet metal with eccentric bearing insert, for shaft diameter 30mm. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPFL-30 + SA206-2RS Representative image for...
Oval support in stamped sheet metal BPFL with SA207 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Oval support in stamped sheet metal with bearing SA207-2RS shaft 35mm - ISB

BPFL35-SA207-ISB
€12.39 (€10.24 tax excl.)
Oval housing in stamped sheet metal with eccentric bearing insert, for 35 mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring fixing, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part No.: BPFL-35 + SA207-2RS Representative image for...
BPFL stamped sheet metal oval housing with SA208 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Oval support in stamped sheet metal with SA208-2RS bearing - 40mm shaft ISB

BPFL40-SA208-ISB
€18.73 (€15.48 tax excl.)
Oval housing in stamped sheet metal with eccentric bearing insert, for 40 mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPFL-40 + SA208-2RS Representative image for...
BPFL stamped sheet metal round bracket with SB202 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Oval support in stamped sheet metal with bearing SB202-2RS shaft 15mm - ISB

BPFL121517-SB202-ISB
€6.01 (€4.97 tax excl.)
Oval housing in stamped sheet metal with bearing insert, for 15mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and grub screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPFL-12-15-17 + SB202-2RS Representative image for illustrative purposes,...
BPFL stamped sheet metal round support with bearing SB203 | Adajusa
  • Pack
Brackets and tensioners with bearings

Oval support in stamped sheet metal with bearing SB203-2RS - 17mm shaft ISB

BPFL121517-SB203-ISB
€6.28 (€5.19 tax excl.)
Oval housing in stamped sheet metal with bearing insert, for 17mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and set screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPFL-12-15-17 + SB203-2RS Representative image for illustrative purposes,...
BPFL stamped sheet metal round support with bearing SB204 | Adajusa
  • Pack
Brackets and tensioners with bearings

Oval support in stamped sheet metal with bearing SB204-2RS - 20mm shaft ISB

BPFL20-SB204-ISB
€6.51 (€5.38 tax excl.)
Oval housing in stamped sheet metal with bearing insert, for 20mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and grub screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPFL-20 + SB204-2RS Representative image for illustrative purposes, the...
BPFL stamped sheet metal round bracket with SB205 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Oval support in stamped sheet metal with bearing SB205-2RS - 25mm shaft ISB

BPFL25-SB205-ISB
€7.09 (€5.86 tax excl.)
Oval housing in stamped sheet metal with bearing insert, for 25mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and set screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPFL-25 + SB205-2RS Representative image for illustrative purposes, the...
BPFL stamped sheet metal round bracket with SB206 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Oval support in stamped sheet metal with bearing SB206-2RS - 30mm shaft ISB

BPFL30-SB206-ISB
€10.14 (€8.38 tax excl.)
Oval housing in stamped sheet metal with bearing insert, for 30 mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and set screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPFL-30 + SB206-2RS Representative image for illustrative purposes, the...
BPFL stamped sheet metal round housing with SB206 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Oval support in stamped sheet metal with bearing SB207-2RS shaft 35mm - ISB

BPFL35-SB207-ISB
€10.96 (€9.06 tax excl.)
Oval housing in stamped sheet metal with bearing insert, for 35 mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and set screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part No.: BPFL-35 + SB207-2RS Representative image for illustrative purposes, the...
BPFL stamped sheet metal round bracket with SB208 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Oval support in stamped sheet metal with SB208-2RS bearing - 40mm shaft ISB

BPFL40-SB208-ISB
€19.12 (€15.80 tax excl.)
Oval housing in stamped sheet metal with bearing insert, for 40 mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and set screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPFL-40 + SB208-2RS Representative image for illustrative purposes, the...
Triangular support in stamped sheet metal BPFT with bearing SA201 :: - Triangular support in stamped plate BPFT with bearing SA2
  • Pack
Brackets and tensioners with bearings

Triangular support in stamped sheet metal with bearing SA201-2RS - 12mm shaft ISB

BPFT121517-SA201-ISB
€6.80 (€5.62 tax excl.)
Triangular housing in stamped sheet metal with eccentric bearing insert, for 12mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPFT-12-15-17 + SA201-2RS Representative...
Soporte triangular en chapa estampada BPFT con rodamiento SB201 | Adajusa
  • Pack
Brackets and tensioners with bearings

Triangular support in stamped sheet metal with bearing SB201-2RS - 12mm shaft ISB

BPFT121517-SB201-ISB
€5.92 (€4.89 tax excl.)
Triangular support in stamped sheet metal with bearing insert, for 12mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and set screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPFT-12-15-17 + SB201-2RS Representative image for illustrative...
Triangular support in stamped sheet metal BPFT with bearing SA202 | Adajusa
  • Pack
Brackets and tensioners with bearings

Triangular support in stamped sheet metal with bearing SA202-2RS 15mm shaft - ISB

BPFT121517-SA202-ISB
€6.91 (€5.71 tax excl.)
Triangular housing in stamped sheet metal with eccentric bearing insert, for 15mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring fixing, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPFT-12-15-17 + SA202-2RS Representative image...
Triangular support in stamped sheet metal BPFT with bearing SA202 | Adajusa
  • Pack
Brackets and tensioners with bearings

Triangular support in stamped sheet metal with bearing SA203-2RS - 17mm shaft ISB

BPFT121517-SA203-ISB
€7.05 (€5.83 tax excl.)
Triangular housing in stamped sheet metal with eccentric bearing insert, for shaft diameter 17mm. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPFT-12-15-17 + SA203-2RS Representative image...
Triangular support in stamped sheet metal BPFT with SA204 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Triangular support in stamped sheet metal with SA204-2RS bearing - 20mm shaft ISB

BPFT20-SA204-ISB
€7.37 (€6.09 tax excl.)
Triangular housing in stamped sheet metal with eccentric bearing insert, for 20mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPFT-20 + SA204-2RS Representative image for...
Triangular support in stamped sheet metal BPFT with bearing SA205 | Adajusa
  • Pack
Brackets and tensioners with bearings

Triangular support in stamped sheet metal with bearing SA205-2RS shaft 25mm - ISB

BPFT25-SA205-ISB
€9.41 (€7.78 tax excl.)
Triangular housing in stamped sheet metal with eccentric bearing insert, for shaft diameter 25mm. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring fixing, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPFT-25 + SA205-2RS Representative image for...
Triangular support in stamped sheet metal BPFT with bearing SA206 | Adajusa
  • Pack
Brackets and tensioners with bearings

Triangular housing in stamped sheet metal with eccentric bearing insertSA205-2RS eje...

BPFT30-SA206-ISB
€12.45 (€10.29 tax excl.)
Triangular housing in stamped sheet metal with eccentric bearing insert, for shaft diameter 30mm. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring fixing, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPFT-30 + SA206-2RS Representative image for...
Triangular support in stamped sheet metal BPFT with bearing SA206 | Adajusa
  • Pack
Brackets and tensioners with bearings

Triangular support in stamped sheet metal with bearing SA207-2RS shaft 35mm - ISB

BPFT35-SA207-ISB
€13.09 (€10.82 tax excl.)
Triangular housing in stamped sheet metal with eccentric bearing insert, for 35 mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part No.: BPFT-35 + SA207-2RS Representative image for...
Soporte triangular en chapa estampada BPFT con rodamiento SB201 | Adajusa
  • Pack
Brackets and tensioners with bearings

Triangular support in stamped sheet metal with bearing SB202-2RS - 15mm shaft ISB

BPFT121517-SB202-ISB
€5.94 (€4.91 tax excl.)
Triangular support in stamped sheet metal with bearing insert, for 15mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and grub screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPFT-12-15-17 + SB202-2RS Representative image for illustrative...
Soporte triangular en chapa estampada BPFT con rodamiento SB201 | Adajusa
  • Pack
Brackets and tensioners with bearings

Triangular support in stamped sheet metal with bearing SB203-2RS - 17mm shaft ISB

BPFT121517-SB203-ISB
€6.21 (€5.13 tax excl.)
Triangular support in stamped sheet metal with bearing insert, for 17mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and set screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPFT-12-15-17 + SB203-2RS Representative image for illustrative...
Soporte triangular en chapa estampada BPFT con rodamiento SB201 | Adajusa
  • Pack
Brackets and tensioners with bearings

Triangular support in stamped sheet metal with bearing SB204-2RS shaft 20mm - ISB

BPFT20-SB204-ISB
€6.59 (€5.45 tax excl.)
Triangular support in stamped sheet metal with bearing insert, for 20mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and set screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPFT-20 + SB204-2RS Representative image for illustrative purposes,...
Soporte triangular en chapa estampada BPFT con rodamiento SB201 | Adajusa
  • Pack
Brackets and tensioners with bearings

Triangular support in stamped sheet metal with bearing SB205-2RS - 25mm shaft ISB

BPFT25-SB205-ISB
€7.02 (€5.80 tax excl.)
Triangular support in stamped sheet metal with bearing insert, for 25mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and grub screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPFT-25 + SB205-2RS Representative image for illustrative purposes,...
Soporte triangular en chapa estampada BPFT con rodamiento SB201 | Adajusa
  • Pack
Brackets and tensioners with bearings

Triangular support in stamped sheet metal with bearing SB206-2RS - 30mm shaft ISB

BPFT30-SB206-ISB
€11.14 (€9.21 tax excl.)
Triangular support in stamped sheet metal with bearing insert, for shaft diameter 30mm. Self-aligning housing with single-row ball bearing, single-sided collar and grub screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPFT-30 + SB206-2RS Representative image for illustrative purposes,...
Soporte triangular en chapa estampada BPFT con rodamiento SB201 | Adajusa
  • Pack
Brackets and tensioners with bearings

Triangular support in stamped sheet metal with bearing SB207-2RS shaft 35mm - ISB

BPFT35-SB207-ISB
€11.66 (€9.64 tax excl.)
Triangular support in stamped sheet metal with bearing insert, for 35 mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and set screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part No.: BPFT-35 + SB207-2RS Representative image for illustrative...
Brackets and tensioners with bearings

Round support with 60mm UCFC212 axle bearing - ISB

UCFC212-ISB
€39.99 (€33.05 tax excl.)
Round cast iron support with UCFC212 inserted bearing for 60mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCFC212  Representative...
Brackets and tensioners with bearings

Round support with 80mm UCFC216 axle bearing - ISB

UCFC216-ISB
€110.17 (€91.05 tax excl.)
Round cast iron support with UCFC216 inserted bearing for 80mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCFC216  Representative...
Brackets and tensioners with bearings

Tension support with 17mm shaft bearing UCT203 - ISB

UCT203-ISB
€8.23 (€6.80 tax excl.)
Cast iron tensioner support with UC203 inserted bearing for 17mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCT203  Representative...
Brackets and tensioners with bearings

Tension support with 20mm shaft bearing UCT204 - ISB

UCT204-ISB
€7.80 (€6.45 tax excl.)
Cast iron tensioner support with UC204 inserted bearing for 20mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCT204  Representative...
Brackets and tensioners with bearings

Tension support with 25mm shaft bearing UCT205 - ISB

UCT205-ISB
€8.55 (€7.07 tax excl.)
Cast iron tensioner support with UC205 inserted bearing for 25mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCT205  Representative...
Brackets and tensioners with bearings

Tension support with 50mm shaft bearing UCT210 - ISB

UCT210-ISB
€23.69 (€19.58 tax excl.)
Cast iron tensioner support with UC210 inserted bearing for 50mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCT210  Representative...
Brackets and tensioners with bearings

Tension support with 60mm axle bearing UCT212 - ISB

UCT212-ISB
€42.57 (€35.18 tax excl.)
Cast iron tensioner support with UC212 inserted bearing for 60mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCT212  Representative...
Brackets and tensioners with bearings

Tension support with 75mm axle bearing UCT215 - ISB

UCT215-ISB
€76.42 (€63.16 tax excl.)
Cast iron tensioner support with UC215 inserted bearing for 75mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCT215  Representative...
Brackets and tensioners with bearings

Tension support with 80mm axle bearing UCT216 - ISB

UCT216-ISB
€117.55 (€97.15 tax excl.)
Cast iron tensioner support with UC216 inserted bearing for 80mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCT216  Representative...
Brackets and tensioners with bearings

Tension support with 90mm axle bearing UCT218 - ISB

UCT218-ISB
€133.63 (€110.44 tax excl.)
Cast iron tensioner support with UC218 inserted bearing for 90mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCT218  Representative...
Thermoplastic foot support... Thermoplastic foot support... 2
Foot supports with stainless steel bearings in thermoplastic

Thermoplastic foot support with INOX bearing 20mm shaft SSUC-204 - ISB

UCPP+SSUC204
€30.89 (€25.53 tax excl.)
Foot or bridge type support, in black or white thermoplastic, with SSUC-204 stainless steel insert bearing, for 20mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment...
Thermoplastic foot support... Thermoplastic foot support... 2
Foot supports with stainless steel bearings in thermoplastic

Thermoplastic foot support with INOX bearing 25mm shaft SSUC-205 - ISB

UCPP+SSUC205
€36.87 (€30.47 tax excl.)
Foot or bridge type support, in black or white thermoplastic, with SSUC-205 stainless steel insert bearing, for 25mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment...
Thermoplastic foot support... Thermoplastic foot support... 2
Foot supports with stainless steel bearings in thermoplastic

Thermoplastic foot support with INOX bearing 30mm shaft SSUC-206 - ISB

UCPP+SSUC206
€48.13 (€39.78 tax excl.)
Foot or bridge type support, in black or white thermoplastic, with SSUC-206 stainless steel insert bearing, for 30mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment...
Thermoplastic foot support... Thermoplastic foot support... 2
Foot supports with stainless steel bearings in thermoplastic

Thermoplastic foot support with INOX bearing 35mm shaft SSUC-207 - ISB

UCPP+SSUC207
€62.41 (€51.58 tax excl.)
Foot or bridge type support, in black or white thermoplastic, with SSUC-207 stainless steel insert bearing, for 35mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment...
Thermoplastic foot support... Thermoplastic foot support... 2
Foot supports with stainless steel bearings in thermoplastic

Thermoplastic foot support with INOX bearing 40mm shaft SSUC-208 - ISB

UCPP+SSUC208
€74.64 (€61.69 tax excl.)
Foot or bridge type support, in black or white thermoplastic, with SSUC-208 stainless steel insert bearing, for 40mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment...
Oval thermoplastic support... Oval thermoplastic support... 2
Oval supports with stainless steel bearings in thermoplastic

Oval thermoplastic support with INOX bearing 20mm shaft SSUC-204 - ISB

UCFLP+SSUC204
€29.85 (€24.67 tax excl.)
Oval support, in black or white thermoplastic, with SSUC-204 stainless steel insert bearing, for 20mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects. Black...
Oval thermoplastic support... Oval thermoplastic support... 2
Oval supports with stainless steel bearings in thermoplastic

Oval thermoplastic support with INOX bearing 25mm shaft SSUC-205 - ISB

UCFLP+SSUC205
€35.39 (€29.25 tax excl.)
Oval support, in black or white thermoplastic, with SSUC-205 stainless steel insert bearing, for 25mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects....
Oval thermoplastic support... Oval thermoplastic support... 2
Oval supports with stainless steel bearings in thermoplastic

Oval thermoplastic support with INOX bearing 30mm shaft SSUC-206 - ISB

UCFLP+SSUC206
€47.03 (€38.87 tax excl.)
Oval support, in black or white thermoplastic, with SSUC-206 stainless steel insert bearing, for 30mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects. Black...
Oval thermoplastic support... Oval thermoplastic support... 2
Oval supports with stainless steel bearings in thermoplastic

Oval thermoplastic support with INOX bearing 35mm shaft SSUC-207 - ISB

UCFLP+SSUC207
€59.23 (€48.95 tax excl.)
Oval support, in black or white thermoplastic, with SSUC-207 stainless steel insert bearing, for 35mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects. Black...
Oval thermoplastic support... Oval thermoplastic support... 2
Oval supports with stainless steel bearings in thermoplastic

Oval thermoplastic support with INOX bearing 40mm shaft SSUC-208 - ISB

UCFLP+SSUC208
€72.49 (€59.91 tax excl.)
Oval support, in black or white thermoplastic, with SSUC-208 stainless steel insert bearing, for 40mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects....
Square thermoplastic... Square thermoplastic... 2
Square supports with stainless steel bearings in thermoplastic

Square thermoplastic support with INOX bearing 20mm shaft SSUC-204 - ISB

UCFP+SSUC204
€31.54 (€26.07 tax excl.)
Square support, in black or white thermoplastic, with SSUC-204 stainless steel insert bearing, for 20mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects....
Square thermoplastic... Square thermoplastic... 2
Square supports with stainless steel bearings in thermoplastic

Square thermoplastic support with INOX bearing 25mm shaft SSUC-205 - ISB

UCFP+SSUC205
€36.12 (€29.85 tax excl.)
Square support, in black or white thermoplastic, with SSUC-205 stainless steel insert bearing, for 25mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects....
Square thermoplastic... Square thermoplastic... 2
Square supports with stainless steel bearings in thermoplastic

Square thermoplastic support with INOX bearing 30mm shaft SSUC-206 - ISB

UCFP+SSUC206
€48.05 (€39.71 tax excl.)
Square support, in black or white thermoplastic, with SSUC-206 stainless steel insert bearing, for 30mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects....
Square thermoplastic... Square thermoplastic... 2
Square supports with stainless steel bearings in thermoplastic

Square thermoplastic support with INOX bearing 35mm shaft SSUC-207 - ISB

UCFP+SSUC207
€63.16 (€52.20 tax excl.)
Square support, in black or white thermoplastic, with SSUC-207 stainless steel insert bearing, for 35mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects....
Square thermoplastic... Square thermoplastic... 2
Square supports with stainless steel bearings in thermoplastic

Square thermoplastic support with INOX bearing 40mm shaft SSUC-208 - ISB

UCFP+SSUC208
€75.70 (€62.56 tax excl.)
Square support, in black or white thermoplastic, with SSUC-208 stainless steel insert bearing, for 40mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects....
Round support in white...
Round supports with stainless steel bearings in thermoplastic

Round support in white thermoplastic with INOX bearing 20mm shaft SSUC-204 - ISB

UCFCPBSSUC204
€34.41 (€28.44 tax excl.)
Round support, in white thermoplastic, with SSUC-204 stainless steel insert bearing, for 20mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects. Reference:...
Round support in white...
Round supports with stainless steel bearings in thermoplastic

Round support in white thermoplastic with INOX bearing 25mm shaft SSUC-205 - ISB

UCFCPBSSUC205
€39.42 (€32.58 tax excl.)
Round support, in white thermoplastic, with SSUC-205 stainless steel insert bearing, for 25mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects. Reference:...
Round support in white...
Round supports with stainless steel bearings in thermoplastic

Round support in white thermoplastic with INOX bearing 30mm shaft SSUC-206 - ISB

UCFCPBSSUC206
€53.92 (€44.56 tax excl.)
Round support, in white thermoplastic, with SSUC-206 stainless steel insert bearing, for 30mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects. Reference:...
Round support in white...
Round supports with stainless steel bearings in thermoplastic

Round support in white thermoplastic with INOX bearing 35mm shaft SSUC-207 - ISB

UCFCPBSSUC207
€66.13 (€54.65 tax excl.)
Round support, in white thermoplastic, with SSUC-207 stainless steel insert bearing, for 35mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects. Reference:...
Round support in white...
Round supports with stainless steel bearings in thermoplastic

Round support in white thermoplastic with INOX bearing 40mm shaft SSUC-208 - ISB

UCFCPBSSUC208
€79.46 (€65.67 tax excl.)
Round support, in white thermoplastic, with SSUC-208 stainless steel insert bearing, for 40mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects. Reference:...
Thermoplastic tensioner... Thermoplastic tensioner... 2
Tension supports with stainless steel bearings in thermoplastic

Thermoplastic tensioner support with INOX bearing 20mm shaft SSUC-204 - ISB

UCTP+SSUC204
€33.58 (€27.75 tax excl.)
Tension support, in black or white thermoplastic, with SSUC-204 stainless steel insert bearing, for 20mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects....
Thermoplastic tensioner... Thermoplastic tensioner... 2
Tension supports with stainless steel bearings in thermoplastic

Thermoplastic tensioner support with INOX bearing 25mm shaft SSUC-205 - ISB

UCTP+SSUC205
€38.66 (€31.95 tax excl.)
Tension support, in black or white thermoplastic, with SSUC-205 stainless steel insert bearing, for 25mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects....
Thermoplastic tensioner... Thermoplastic tensioner... 2
Tension supports with stainless steel bearings in thermoplastic

Thermoplastic tensioner support with INOX bearing 30mm shaft SSUC-206 - ISB

UCTP+SSUC206
€50.58 (€41.80 tax excl.)
Tension support, in black or white thermoplastic, with SSUC-206 stainless steel insert bearing, for 30mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects....
Thermoplastic tensioner... Thermoplastic tensioner... 2
Tension supports with stainless steel bearings in thermoplastic

Thermoplastic tensioner support with INOX bearing 35mm shaft SSUC-207 - ISB

UCTP+SSUC207
€64.99 (€53.71 tax excl.)
Tension support, in black or white thermoplastic, with SSUC-207 stainless steel insert bearing, for 35mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects....
Thermoplastic tensioner... Thermoplastic tensioner... 2
Tension supports with stainless steel bearings in thermoplastic

Thermoplastic tensioner support with INOX bearing 40mm shaft SSUC-208 - ISB

UCTP+SSUC208
€77.88 (€64.36 tax excl.)
Tension support, in black or white thermoplastic, with SSUC-208 stainless steel insert bearing, for 40mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects....
Thermoplastic flange... Thermoplastic flange... 2
Flange supports with stainless steel bearings in thermoplastic

Thermoplastic flange support with INOX bearing 30mm shaft SSUC-206 - ISB

UCFBP+SSUC206
€48.27 (€39.89 tax excl.)
flange support, in black or white thermoplastic, with SSUC-206 stainless steel insert bearing, for 30mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects....
Thermoplastic flange... Thermoplastic flange... 2
Flange supports with stainless steel bearings in thermoplastic

Thermoplastic flange support with INOX bearing 20mm shaft SSUC-204 - ISB

UCFBP+SSUC204
€31.11 (€25.71 tax excl.)
flange support, in black or white thermoplastic, with SSUC-204 stainless steel insert bearing, for 20mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects....
Thermoplastic flange... Thermoplastic flange... 2
Flange supports with stainless steel bearings in thermoplastic

Thermoplastic flange support with INOX bearing 25mm shaft SSUC-205 - ISB

UCFBP+SSUC205
€36.38 (€30.07 tax excl.)
flange support, in black or white thermoplastic, with SSUC-205 stainless steel insert bearing, for 25mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects....
White thermoplastic flange...
Flange supports with stainless steel bearings in thermoplastic

White thermoplastic flange support with INOX bearing 35mm shaft SSUC-207 - ISB

UCFBPBSSUC207
€53.08 (€43.87 tax excl.)
flange support, in white thermoplastic, with SSUC-207 stainless steel insert bearing, for 35mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects. Reference:...
White thermoplastic flange...
Flange supports with stainless steel bearings in thermoplastic

White thermoplastic flange support with INOX bearing 40mm shaft SSUC-208 - ISB

UCFBPBSSUC208
€58.50 (€48.35 tax excl.)
flange support, in white thermoplastic, with SSUC-208 stainless steel insert bearing, for 40mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects. Reference:...
Foot supports with stainless steel bearings

Support with 12mm INOX UCP201 axle bearing - ISB

SSUCP201-ISB
€45.21 (€37.36 tax excl.)
Foot support with inserted bearing UCP201, both elements in stainless steel, for 12mm diameter shaft. Self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference:...
Square supports with stainless steel bearings

Square support with 12mm INOX UCF201 axle bearing - ISB

SSUCF201-ISB
€45.21 (€37.36 tax excl.)
Square support with inserted bearing UCF201, both elements in stainless steel, for 12mm diameter shaft. Self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference:...
Square supports with stainless steel bearings

Square support with bearing 15mm shaft INOX UCF202 - ISB

SSUCF202-ISB
€46.55 (€38.47 tax excl.)
Square support with bearing inserted UCF202, both elements in stainless steel, for shaft diameter 15mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCF202...
Square supports with stainless steel bearings

Square support with bearing shaft 17mm INOX UCF203 - ISB

SSUCF203-ISB
€47.70 (€39.42 tax excl.)
Square support with bearing inserted UCF203, both elements in stainless steel, for shaft diameter 17mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCF203...
Square supports with stainless steel bearings

Square support with bearing axis 20mm INOX UCF204 - ISB

SSUCF204-ISB
€40.04 (€33.09 tax excl.)
Square support with bearing inserted UCF204, both elements in stainless steel, for shaft diameter 20mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-aligning and to compensate for misalignment. Part number: SSUCF204...
Square supports with stainless steel bearings

Square support with bearing shaft 25mm INOX UCF205 - ISB

SSUCF205-ISB
€44.82 (€37.04 tax excl.)
Square support with bearing inserted UCF205, both elements in stainless steel, for shaft diameter 25mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCF205...
Square supports with stainless steel bearings

Square support with bearing shaft 30mm INOX UCF206 - ISB

SSUCF206-ISB
€72.22 (€59.69 tax excl.)
Square support with bearing inserted UCF206, both elements in stainless steel, for shaft diameter 30mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCF206...
Square supports with stainless steel bearings

Square support with bearing shaft 35mm INOX UCF207 - ISB

SSUCF207-ISB
€90.91 (€75.13 tax excl.)
Square support with bearing inserted UCF207, both elements in stainless steel, for shaft diameter 35mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCF207...
Square supports with stainless steel bearings

Square support with bearing shaft 40mm INOX UCF208 - ISB

SSUCF208-ISB
€106.70 (€88.18 tax excl.)
Square support with bearing inserted UCF208, both elements in stainless steel, for shaft diameter 40mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCF208...
Square supports with stainless steel bearings

Square bracket with bearing shaft 45mm INOX UCF209 - ISB

SSUCF209-ISB
€113.44 (€93.75 tax excl.)
Square support with bearing inserted UCF209, both elements in stainless steel, for shaft diameter 45mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCF209...
Square supports with stainless steel bearings

Square support with bearing axis 50mm INOX UCF210 - ISB

SSUCF210-ISB
€145.73 (€120.44 tax excl.)
Square support with bearing inserted UCF210, both elements in stainless steel, for shaft diameter 50mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCF210...
Square supports with stainless steel bearings

Square support with bearing shaft 55mm INOX UCF211 - ISB

SSUCF211-ISB
€258.26 (€213.44 tax excl.)
Square support with bearing inserted UCF211, both elements in stainless steel, for shaft diameter 55mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCF211...
Square supports with stainless steel bearings

Square support with bearing shaft 60mm INOX UCF212 - ISB

SSUCF212-ISB
€303.07 (€250.47 tax excl.)
Square support with bearing inserted UCF212, both elements in stainless steel, for shaft diameter 60mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCF212...
Square supports with stainless steel bearings

Square support with bearing shaft 70mm INOX UCF214 - ISB

SSUCF214-ISB
€632.39 (€522.64 tax excl.)
Square support with bearing inserted UCF214, both elements in stainless steel, for shaft diameter 70mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCF214...
Square supports with stainless steel bearings

Square support with bearing shaft 80mm INOX UCF216 - ISB

SSUCF216-ISB
€979.11 (€809.18 tax excl.)
Square support with bearing inserted UCF216, both elements in stainless steel, for shaft diameter 80mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCF216...
View
Round supports with INOX bearings

Round support with 17mm INOX UCFC203 axle bearing - ISB

SSUCFC203-ISB
€57.40 (€47.44 tax excl.)
Round support with inserted bearing UCFC203, both elements in stainless steel, for 17mm diameter shaft. Self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference:...
Round supports with INOX bearings

Round support with bearing 35mm INOX 35mm shaft UCFC207 - ISB

SSUCFC207-ISB
€93.17 (€77.00 tax excl.)
Round support with bearing inserted UCFC207, both elements in stainless steel, for shaft diameter 35mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCFC207...
Oval supports with stainless steel bearings

Oval support with 12mm INOX UCFL201 axle bearing - ISB

SSUCFL201-ISB
€45.21 (€37.36 tax excl.)
Oval support with inserted bearing UCFL201, both elements in stainless steel, for 12mm diameter shaft. Self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference:...
Oval supports with stainless steel bearings

Oval support with bearing shaft 15mm INOX UCFL202 - ISB

SSUCFL202-ISB
€46.55 (€38.47 tax excl.)
Oval support with bearing inserted UCFL202, both elements in stainless steel, for shaft diameter 15mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCFL202...
Oval supports with stainless steel bearings

Oval support with bearing shaft 17mm INOX UCFL203 - ISB

SSUCFL203-ISB
€47.70 (€39.42 tax excl.)
Oval support with bearing inserted UCFL203, both elements in stainless steel, for shaft diameter 17mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCFL203...
Oval supports with stainless steel bearings

Oval support with bearing shaft 20mm INOX UCFL204 - ISB

SSUCFL204-ISB
€40.04 (€33.09 tax excl.)
Oval support with bearing inserted UCFL204, both elements in stainless steel, for shaft diameter 20mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCFL204...
Oval supports with stainless steel bearings

Oval support with bearing shaft 25mm INOX UCFL205 - ISB

SSUCFL205-ISB
€44.82 (€37.04 tax excl.)
Oval support with bearing inserted UCFL205, both elements in stainless steel, for shaft diameter 25mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCFL205...
Oval supports with stainless steel bearings

Oval support with bearing shaft 30mm INOX UCFL206 - ISB

SSUCFL206-ISB
€72.22 (€59.69 tax excl.)
Oval support with bearing inserted UCFL206, both elements in stainless steel, for shaft diameter 30mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCFL206...
Oval supports with stainless steel bearings

Oval support with bearing shaft 35mm INOX UCFL207 - ISB

SSUCFL207-ISB
€90.91 (€75.13 tax excl.)
Oval support with bearing inserted UCFL207, both elements in stainless steel, for shaft diameter 35mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCFL207...
Oval supports with stainless steel bearings

Oval support with bearing shaft 40mm INOX UCFL208 - ISB

SSUCFL208-ISB
€106.70 (€88.18 tax excl.)
Oval support with bearing inserted UCFL208, both elements in stainless steel, for shaft diameter 40mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCFL208...
Oval supports with stainless steel bearings

Oval support with bearing shaft 45mm INOX UCFL209 - ISB

SSUCFL209-ISB
€113.44 (€93.75 tax excl.)
Oval support with bearing inserted UCFL209, both elements in stainless steel, for shaft diameter 45mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCFL209...
Oval supports with stainless steel bearings

Oval support with bearing shaft 50mm INOX UCFL210 - ISB

SSUCFL210-ISB
€145.73 (€120.44 tax excl.)
Oval support with bearing inserted UCFL210, both elements in stainless steel, for shaft diameter 50mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCFL210...
Oval supports with stainless steel bearings

Oval support with bearing shaft 55mm INOX UCFL211 - ISB

SSUCFL211-ISB
€258.26 (€213.44 tax excl.)
Oval support with bearing inserted UCFL211, both elements in stainless steel, for shaft diameter 55mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCFL211...
Oval supports with stainless steel bearings

Oval support with bearing shaft 60mm INOX UCFL212 - ISB

SSUCFL212-ISB
€303.07 (€250.47 tax excl.)
Oval support with bearing inserted UCFL212, both elements in stainless steel, for shaft diameter 60mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCFL212...
Tension supports with INOX bearings

Tensioner bracket with bearing shaft 17mm INOX UCT203 - ISB

SSUCT203-ISB
€59.59 (€49.25 tax excl.)
Tensioning support with bearing inserted UCT203, both elements in stainless steel, for shaft diameter 17mm. Self-aligning support bracket with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCT203...
Tension supports with INOX bearings

Tensioner bracket with bearing shaft 20mm INOX UCT204 - ISB

SSUCT204-ISB
€55.71 (€46.04 tax excl.)
Tensioning support with bearing inserted UCT204, both elements in stainless steel, for shaft diameter 20mm. Self-aligning support bracket with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCT204...
Tension supports with INOX bearings

Tensioner bracket with bearing shaft 25mm INOX UCT205 - ISB

SSUCT205-ISB
€60.21 (€49.76 tax excl.)
Tensioning support with bearing inserted UCT205, both elements in stainless steel, for shaft diameter 25mm. Self-aligning support bracket with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCT205...
Tension supports with INOX bearings

Tensioner bracket with bearing shaft 30mm INOX UCT206 - ISB

SSUCT206-ISB
€84.00 (€69.42 tax excl.)
Tensioning support with bearing inserted UCT206, both elements in stainless steel, for shaft diameter 30mm. Self-aligning support bracket with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCT206...
Tension supports with INOX bearings

Tensioner bracket with bearing 35mm shaft INOX UCT207 - ISB

SSUCT207-ISB
€117.90 (€97.44 tax excl.)
Tensioning support with bearing inserted UCT207, both elements in stainless steel, for shaft diameter 35mm. Self-aligning support bracket with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCT207...
Tension supports with INOX bearings

Tensioner bracket with bearing shaft 40mm INOX UCT208 - ISB

SSUCT208-ISB
€134.95 (€111.53 tax excl.)
Tensioning support with bearing inserted UCT208, both elements in stainless steel, for shaft diameter 40mm. Self-aligning support bracket with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCT208...
Tension supports with INOX bearings

Tensioner bracket with bearing shaft 45mm INOX UCT209 - ISB

SSUCT209-ISB
€145.99 (€120.65 tax excl.)
Tensioning support with bearing inserted UCT209, both elements in stainless steel, for shaft diameter 45mm. Self-aligning support bracket with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCT209...
Tension supports with INOX bearings

Tensioner bracket with bearing shaft 50mm INOX UCT210 - ISB

SSUCT210-ISB
€155.58 (€128.58 tax excl.)
Tensioning support with bearing inserted UCT210, both elements in stainless steel, for shaft diameter 50mm. Self-aligning support bracket with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCT210...
Tension supports with INOX bearings

Tensioner bracket with bearing shaft 55mm INOX UCT211 - ISB

SSUCT211-ISB
€218.71 (€180.75 tax excl.)
Tensioning support with bearing inserted UCT211, both elements in stainless steel, for shaft diameter 55mm. Self-aligning support bracket with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCT211...
Tension supports with INOX bearings

Tensioner bracket with bearing shaft 60mm INOX UCT212 - ISB

SSUCT212-ISB
€274.91 (€227.20 tax excl.)
Tensioning support with bearing inserted UCT212, both elements in stainless steel, for shaft diameter 60mm. Self-aligning support bracket with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCT212...
Reduced bridge supports with stainless steel bearings

Reduced bridge support with bearing shaft 12mm INOX UCPA201 - ISB

SSUCPA201-ISB
€57.51 (€47.53 tax excl.)
Reduced bridge type support with bearing inserted UCPA201, both elements in stainless steel, for 12mm diameter shaft. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number:...
View
Reduced bridge supports with stainless steel bearings

Reduced bridge support with bearing shaft 15mm INOX UCPA202 - ISB

SSUCPA202-ISB
€57.51 (€47.53 tax excl.)
Reduced bridge type support with bearing inserted UCPA202, both elements in stainless steel, for shaft diameter 15mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number:...
Reduced bridge supports with stainless steel bearings

Reduced bridge support with bearing shaft 17mm INOX UCPA203 - ISB

SSUCPA203-ISB
€57.51 (€47.53 tax excl.)
Reduced bridge type support with bearing inserted UCPA203, both elements in stainless steel, for shaft diameter 17mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number:...
Reduced bridge supports with stainless steel bearings

Reduced bridge support with bearing axis 20mm INOX UCPA204 - ISB

SSUCPA204-ISB
€43.40 (€35.87 tax excl.)
Reduced bridge type support with bearing inserted UCPA204, both elements in stainless steel, for shaft diameter 20mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number:...
Reduced bridge supports with stainless steel bearings

Reduced bridge support with bearing axis 25mm INOX UCPA205 - ISB

SSUCPA205-ISB
€48.88 (€40.40 tax excl.)
Reduced bridge type support with bearing inserted UCPA205, both elements in stainless steel, for shaft diameter 25mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number:...
Reduced bridge supports with stainless steel bearings

Reduced bridge support with bearing shaft 30mm INOX UCPA206 - ISB

SSUCPA206-ISB
€65.91 (€54.47 tax excl.)
Reduced bridge type support with bearing inserted UCPA206, both elements in stainless steel, for shaft diameter 30mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number:...
Reduced bridge supports with stainless steel bearings

Reduced bridge support with bearing shaft 35mm INOX UCPA207 - ISB

SSUCPA207-ISB
€97.48 (€80.56 tax excl.)
Reduced bridge type support with bearing inserted UCPA207, both elements in stainless steel, for shaft diameter 35mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number:...
Reduced bridge supports with stainless steel bearings

Reduced bridge support with bearing shaft 40mm INOX UCPA208 - ISB

SSUCPA208-ISB
€110.19 (€91.07 tax excl.)
Reduced bridge type support with bearing inserted UCPA208, both elements in stainless steel, for shaft diameter 40mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number:...
Reduced bridge supports with stainless steel bearings

Reduced bridge support with bearing shaft 45mm INOX UCPA209 - ISB

SSUCPA209-ISB
€126.37 (€104.44 tax excl.)
Reduced bridge type support with bearing inserted UCPA209, both elements in stainless steel, for 45mm diameter shaft. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number:...
Reduced bridge supports with stainless steel bearings

Reduced bridge support with bearing axis 50mm INOX UCPA210 - ISB

SSUCPA210-ISB
€163.73 (€135.31 tax excl.)
Reduced bridge type support with bearing inserted UCPA210, both elements in stainless steel, for shaft diameter 50mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number:...
Reduced bridge supports with stainless steel bearings

Reduced bridge support with bearing shaft 55mm INOX UCPA211 - ISB

SSUCPA211-ISB
€289.24 (€239.04 tax excl.)
Reduced bridge type support with bearing inserted UCPA211, both elements in stainless steel, for shaft diameter 55mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number:...
Reduced bridge supports with stainless steel bearings

Reduced bridge support with bearing shaft 60mm INOX UCPA212 - ISB

SSUCPA212-ISB
€339.47 (€280.55 tax excl.)
Reduced bridge type support with bearing inserted UCPA212, both elements in stainless steel, for shaft diameter 60mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-aligning and to compensate for misalignment. Part number:...
Flange supports with INOX bearings

flange support with 20mm INOX UCFB204 shaft bearing - ISB

SSUCFB204-ISB
€40.55 (€33.51 tax excl.)
Side flange support with inserted bearing UCFB204, both elements in stainless steel, for 20mm diameter shaft. Self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects....
Flange supports with INOX bearings

Support of flange with bearing 15mm shaft INOX UCFB202 - ISB

SSUCFB202-ISB
€50.69 (€41.89 tax excl.)
Lateral flange support with bearing inserted UCFB202, both elements in stainless steel, for shaft diameter 15mm. Self-aligning support bracket with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number:...
View
Flange supports with INOX bearings

Support of flange with bearing shaft 17mm INOX UCFB203 - ISB

SSUCFB203-ISB
€50.69 (€41.89 tax excl.)
Lateral flange support with bearing inserted UCFB203, both elements in stainless steel, for shaft diameter 17mm. Self-aligning support bracket with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number:...
Flange supports with INOX bearings

Support for flange with bearing shaft 25mm INOX UCFB205 - ISB

SSUCFB205-ISB
€47.38 (€39.16 tax excl.)
Lateral flange support with bearing inserted UCFB205, both elements in stainless steel, for shaft diameter 25mm. Self-aligning support bracket with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number:...
Flange supports with INOX bearings

Support of flange with bearing shaft 30mm INOX UCFB206 - ISB

SSUCFB206-ISB
€55.96 (€46.25 tax excl.)
Lateral flange support with bearing inserted UCFB206, both elements in stainless steel, for shaft diameter 30mm. Self-aligning support bracket with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number:...
Flange supports with INOX bearings

Support of flange with bearing shaft 35mm INOX UCFB207 - ISB

SSUCFB207-ISB
€65.50 (€54.13 tax excl.)
Lateral flange support with bearing inserted UCFB207, both elements in stainless steel, for 35mm diameter shaft. Self-aligning support bracket with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number:...
Flange supports with INOX bearings

Support of flange with bearing shaft 40mm INOX UCFB208 - ISB

SSUCFB208-ISB
€76.65 (€63.35 tax excl.)
Lateral flange support with bearing inserted UCFB208, both elements in stainless steel, for shaft diameter 40mm. Self-aligning support bracket with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number:...
Reduced bridge supports with cast bearings

Reduced bridge support 12mm axis UCPA201- ISB

UCPA201-ISB
€10.35 (€8.55 tax excl.)
Reduced bridge cast support with UCPA201 inserted bearing for 12mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCPA201  Representative...
Reduced bridge supports with cast bearings

Reduced bridge support 15mm axis UCPA202- ISB

UCPA202-ISB
€10.35 (€8.55 tax excl.)
Reduced bridge cast support with UCPA202 inserted bearing for 15mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCPA202  Representative...
Reduced bridge supports with cast bearings

Reduced bridge support 17mm axis UCPA203- ISB

UCPA203-ISB
€10.35 (€8.55 tax excl.)
Reduced bridge cast support with UCPA203 inserted bearing for 17mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCPA203  Representative...
Reduced bridge supports with cast bearings

Reduced bridge support 20mm axis UCPA204- ISB

UCPA204-ISB
€10.35 (€8.55 tax excl.)
Reduced bridge cast support with UCPA204 inserted bearing for 20mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCPA204  Representative...
Reduced bridge supports with cast bearings

Reduced bridge support 25mm shaft UCPA205- ISB

UCPA205-ISB
€10.38 (€8.58 tax excl.)
Reduced bridge cast support with UCPA205 inserted bearing for 25mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCPA205  Representative...
Reduced bridge supports with cast bearings

Reduced bridge support 30mm axis UCPA206- ISB

UCPA206-ISB
€12.98 (€10.73 tax excl.)
Reduced bridge cast support with UCPA206 inserted bearing for 30mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCPA206  Representative...
Reduced bridge supports with cast bearings

Reduced bridge support 35mm axis UCPA207- ISB

UCPA207-ISB
€15.03 (€12.42 tax excl.)
Reduced bridge cast support with UCPA207 inserted bearing for 35mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCPA207  Representative...
Reduced bridge supports with cast bearings

Reduced bridge support 40mm axis UCPA208- ISB

UCPA208-ISB
€19.69 (€16.27 tax excl.)
Reduced bridge cast support with UCPA208 inserted bearing for 40mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCPA208  Representative...
Reduced bridge supports with cast bearings

Reduced bridge support 45mm axis UCPA209- ISB

UCPA209-ISB
€19.41 (€16.04 tax excl.)
Reduced bridge cast support with UCPA209 inserted bearing for 45mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCPA209  Representative...
Reduced bridge supports with cast bearings

Reduced bridge support 50mm axis UCPA210- ISB

UCPA210-ISB
€25.63 (€21.18 tax excl.)
Reduced bridge cast support with UCPA210 inserted bearing for 50mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCPA210  Representative...
Reduced bridge supports with cast bearings

Reduced bridge support 55mm axis UCPA211- ISB

UCPA211-ISB
€31.06 (€25.67 tax excl.)
Reduced bridge cast support with UCPA211 inserted bearing for 55mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCPA211  Representative...
Reduced bridge supports with cast bearings

Reduced bridge support 60mm axis UCPA212- ISB

UCPA212-ISB
€38.74 (€32.02 tax excl.)
Reduced bridge cast support with UCPA212 inserted bearing for 60mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCPA212  Representative...
Aluminum support with steel...
Foot supports with bearings - Light aluminum alloy series

Aluminum support with steel bearing 10mm shaft UP000 - ISB

UP000-ISB
€10.45 (€8.64 tax excl.)
Foot or bridge type support, in aluminum alloy with steel insert bearing UP000, for 10mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference:...
Aluminum support with steel...
Foot supports with bearings - Light aluminum alloy series

Aluminum support with steel bearing 12mm shaft UP001 - ISB

UP001-ISB
€10.49 (€8.67 tax excl.)
Foot or bridge type support, in aluminum alloy with steel insert bearing UP001, for 12mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UP001...
Aluminum support with steel...
Foot supports with bearings - Light aluminum alloy series

Aluminum support with steel bearing 15mm shaft UP002 - ISB

UP002-ISB
€11.07 (€9.15 tax excl.)
Foot or bridge type support, in aluminum alloy with steel insert bearing UP002, for 15mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UP002...
Aluminum support with steel...
Foot supports with bearings - Light aluminum alloy series

Aluminum support with steel bearing 17mm shaft UP003 - ISB

UP003-ISB
€15.11 (€12.49 tax excl.)
Foot or bridge type support, in aluminum alloy with steel insert bearing UP003, for 17mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UP003...
Aluminum support with steel...
Foot supports with bearings - Light aluminum alloy series

Aluminum support with steel bearing 20mm shaft UP004 - ISB

UP004-ISB
€15.86 (€13.11 tax excl.)
Foot or bridge type support, in aluminum alloy with steel insert bearing UP004, for 20mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UP004...
Aluminum support with steel...
Foot supports with bearings - Light aluminum alloy series

Aluminum support with steel bearing 25mm shaft UP005 - ISB

UP005-ISB
€16.67 (€13.78 tax excl.)
Foot or bridge type support, in aluminum alloy with steel insert bearing UP005, for 25mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UP005...
Aluminum support with steel...
Foot supports with bearings - Light aluminum alloy series

Aluminum support with steel bearing 30mm shaft UP006 - ISB

UP006-ISB
€26.29 (€21.73 tax excl.)
Foot or bridge type support, in aluminum alloy with steel insert bearing UP006, for 30mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UP006...
Aluminum support with steel...
Foot supports with bearings - Light aluminum alloy series

Aluminum support with steel bearing 35mm shaft UP007 - ISB

UP007-ISB
€37.29 (€30.82 tax excl.)
Foot or bridge type support, in aluminum alloy with steel insert bearing UP007, for 35mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UP007...
Support with stainless...
Foot supports with bearings - Light aluminum alloy series

Support with stainless steel bearing 10mm shaft UP000 - ISB

UP000INOX-ISB
€28.31 (€23.40 tax excl.)
Foot or bridge type support with UP000 inserted bearing , for 10mm diameter shaft, both elements in stainless steel. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects....
Support with stainless...
Foot supports with bearings - Light aluminum alloy series

Support with stainless steel bearing 12mm shaft UP001 - ISB

UP001INOX-ISB
€33.90 (€28.02 tax excl.)
Foot or bridge type support with UP001 inserted bearing , for 12mm diameter shaft, both elements in stainless steel. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects....
Support with stainless...
Foot supports with bearings - Light aluminum alloy series

Support with stainless steel bearing 15mm shaft UP002 - ISB

UP002INOX-ISB
€38.53 (€31.84 tax excl.)
Foot or bridge type support with UP002 inserted bearing , for 15mm diameter shaft, both elements in stainless steel. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects....
Support with stainless...
Foot supports with bearings - Light aluminum alloy series

Support with stainless steel bearing 17mm shaft UP003 - ISB

UP003INOX-ISB
€46.22 (€38.20 tax excl.)
Foot or bridge type support with UP003 inserted bearing , for 17mm diameter shaft, both elements in stainless steel. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects....
Support with stainless...
Foot supports with bearings - Light aluminum alloy series

Support with stainless steel bearing 20mm shaft UP004 - ISB

UP004INOX-ISB
€56.54 (€46.73 tax excl.)
Foot or bridge type support with UP004 inserted bearing , for 20mm diameter shaft, both elements in stainless steel. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects....
Support with stainless...
Foot supports with bearings - Light aluminum alloy series

Support with stainless steel bearing 25mm shaft UP005 - ISB

UP005INOX-ISB
€69.26 (€57.24 tax excl.)
Foot or bridge type support with UP005 inserted bearing , for 25mm diameter shaft, both elements in stainless steel. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects....
Support with stainless...
Foot supports with bearings - Light aluminum alloy series

Support with stainless steel bearing 30mm shaft UP006 - ISB

UP006INOX-ISB
€91.05 (€75.25 tax excl.)
Foot or bridge type support with UP006 inserted bearing , for 30mm diameter shaft, both elements in stainless steel. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects....
Support with stainless...
Foot supports with bearings - Light aluminum alloy series

Support with stainless steel bearing 35mm shaft UP007 - ISB

UP007INOX-ISB
€143.51 (€118.60 tax excl.)
Foot or bridge type support with UP007 inserted bearing , for 35mm diameter shaft, both elements in stainless steel. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects....
Aluminum support with...
Foot supports with bearings - Light aluminum alloy series

Aluminum support with eccentric bearing in steel shaft 10mm UP000 - ISB

UP000EX-ISB
€11.07 (€9.15 tax excl.)
Foot or bridge type support, in aluminum alloy with steel insert bearing UP000, for 10mm diameter shaft. Self-aligning support with ball bearing inserted with eccentric ring for fixing, sheet metal seal with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UP000...
View
Aluminum support with...
Foot supports with bearings - Light aluminum alloy series

Aluminum support with eccentric bearing in steel shaft 12mm UP001 - ISB

UP001EX-ISB
€11.13 (€9.20 tax excl.)
Foot or bridge type support, in aluminum alloy with steel insert bearing UP001, for 12mm diameter shaft. Self-aligning support with ball bearing inserted with eccentric ring for fixing, sheet metal seal with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UP001 ECCENTRIC...
Aluminum support with...
Foot supports with bearings - Light aluminum alloy series

Aluminum support with eccentric bearing in steel shaft 15mm UP002 - ISB

UP002EX-ISB
€11.72 (€9.69 tax excl.)
Foot or bridge type support, in aluminum alloy with steel insert bearing UP002, for 15mm diameter shaft. Self-aligning support with ball bearing inserted with eccentric ring for fixing, sheet metal seal with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UP002...
Aluminum support with...
Foot supports with bearings - Light aluminum alloy series

Aluminum support with eccentric bearing in steel shaft 17mm UP003 - ISB

UP003EX-ISB
€16.02 (€13.24 tax excl.)
Foot or bridge type support, in aluminum alloy with steel insert bearing UP003, for 17mm diameter shaft. Self-aligning support with ball bearing inserted with eccentric ring for fixing, sheet metal seal with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UP003 ECCENTRIC...
Aluminum support with...
Foot supports with bearings - Light aluminum alloy series

Aluminum support with eccentric bearing in steel shaft 20mm UP004 - ISB

UP004EX-ISB
€16.81 (€13.89 tax excl.)
Foot or bridge type support, in aluminum alloy with steel insert bearing UP004, for 20mm diameter shaft. Self-aligning support with ball bearing inserted with eccentric ring for fixing, sheet metal seal with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UP004...
Aluminum support with...
Foot supports with bearings - Light aluminum alloy series

Aluminum support with eccentric bearing in steel shaft 25mm UP005 - ISB

UP005EX-ISB
€17.48 (€14.45 tax excl.)
Foot or bridge type support, in aluminum alloy with steel insert bearing UP005, for 25mm diameter shaft. Self-aligning support with ball bearing inserted with eccentric ring for fixing, sheet metal seal with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UP005...
Aluminum support with...
Foot supports with bearings - Light aluminum alloy series

Aluminum support with eccentric bearing in steel shaft 30mm UP006 - ISB

UP006EX-ISB
€27.85 (€23.02 tax excl.)
Foot or bridge type support, in aluminum alloy with steel insert bearing UP006, for 30mm diameter shaft. Self-aligning support with ball bearing inserted with eccentric ring for fixing, sheet metal seal with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UP006...
Aluminum support with...
Foot supports with bearings - Light aluminum alloy series

Aluminum support with eccentric bearing in steel shaft 35mm UP007 - ISB

UP007EX-ISB
€39.55 (€32.69 tax excl.)
Foot or bridge type support, in aluminum alloy with steel insert bearing UP007, for 35mm diameter shaft. Self-aligning support with ball bearing inserted with eccentric ring for fixing, sheet metal seal with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UP007 ECCENTRIC...
Oval support in aluminium...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support in aluminium with steel bearing 10mm axis UFL000 - ISB

UFL000-ISB
€7.20 (€5.95 tax excl.)
Oval support, in aluminum alloy with steel insert bearing UFL000, for 10mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL000  ...
Oval support in aluminium...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support in aluminium with eccentric bearing in steel axis 10mm UFL000 - ISB

UFL000EX-ISB
€7.64 (€6.31 tax excl.)
Oval support, in aluminum alloy with steel insert bearing UFL000, for 10mm diameter shaft. Self-aligning support with ball bearing inserted with eccentric ring for fixing, sheet metal seal with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL000 ECCENTRIC  ...
View
Oval support with INOX...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support with INOX bearing 10mm shaft UFL000 - ISB

UFL000INOXISB
€24.01 (€19.84 tax excl.)
Oval support with UFL000 bearing insert, for 10mm diameter shaft, both elements in stainless steel. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL000 INOX  ...
Oval support in aluminium...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support in aluminium with steel bearing 12mm axis UFL001 - ISB

UFL001-ISB
€9.15 (€7.56 tax excl.)
Oval support, in aluminum alloy with steel insert bearing UFL001, for 12mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL001...
Oval support in aluminum...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support in aluminum with steel bearing 15mm axis UFL002 - ISB

UFL002-ISB
€9.20 (€7.60 tax excl.)
Oval support, in aluminum alloy with steel insert bearing UFL002, for 15mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL002...
Oval support in aluminum...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support in aluminum with steel bearing 17mm axis UFL003 - ISB

UFL003-ISB
€9.33 (€7.71 tax excl.)
Oval support, in aluminum alloy with steel insert bearing UFL003, for 17mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL003...
Oval support in aluminium...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support in aluminium with steel bearing 20mm axis UFL004 - ISB

UFL004-ISB
€14.68 (€12.13 tax excl.)
Oval support, in aluminum alloy with steel insert bearing UFL004, for 20mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL004...
Oval support in aluminum...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support in aluminum with steel bearing 25mm axis UFL005 - ISB

UFL005-ISB
€16.24 (€13.42 tax excl.)
Oval support, in aluminum alloy with steel insert bearing UFL005, for 25mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL005...
Oval support in aluminum...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support in aluminum with steel bearing 30mm axis UFL006 - ISB

UFL006-ISB
€18.34 (€15.16 tax excl.)
Oval support, in aluminum alloy with steel insert bearing UFL006, for 30mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL006...
Oval aluminium support with...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval aluminium support with steel bearing 35mm axis UFL007 - ISB

UFL007-ISB
€30.31 (€25.05 tax excl.)
Oval support, in aluminum alloy with steel insert bearing UFL007, for 35mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL007...
Oval support with INOX...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support with INOX bearing 12mm shaft UFL001 - ISB

UFL001INOXISB
€27.67 (€22.87 tax excl.)
Oval support with UFL001 bearing insert, for 12mm diameter shaft, both elements in stainless steel. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL001 INOX...
Oval support with INOX...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support with INOX bearing 15mm shaft UFL002 - ISB

UFL002INOXISB
€30.84 (€25.49 tax excl.)
Oval support with UFL002 bearing insert, for 15mm diameter shaft, both elements in stainless steel. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL002 INOX...
Oval support with INOX...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support with INOX bearing 17mm shaft UFL003 - ISB

UFL003INOXISB
€35.82 (€29.60 tax excl.)
Oval support with UFL003 bearing insert, for 17mm diameter shaft, both elements in stainless steel. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL003 INOX...
Oval support with stainless...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support with stainless steel bearing 20mm shaft UFL004 - ISB

UFL004INOXISB
€44.07 (€36.42 tax excl.)
Oval support with UFL004 bearing insert, for 20mm diameter shaft, both elements in stainless steel. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL004 INOX...
Oval support with INOX...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support with INOX bearing 25mm shaft UFL005 - ISB

UFL005INOXISB
€52.47 (€43.36 tax excl.)
Oval support with UFL005 bearing insert, for 25mm diameter shaft, both elements in stainless steel. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL005 INOX...
Oval support with INOX...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support with INOX bearing 30mm shaft UFL006 - ISB

UFL006INOXISB
€70.26 (€58.07 tax excl.)
Oval support with UFL006 bearing insert, for 30mm diameter shaft, both elements in stainless steel. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL006 INOX  Representative...
Oval support with INOX...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support with INOX bearing 35mm shaft UFL007 - ISB

UFL007INOXISB
€111.78 (€92.38 tax excl.)
Oval support with UFL007 bearing insert, for 35mm diameter shaft, both elements in stainless steel. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL007 INOX...
Oval support in aluminum...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support in aluminum with eccentric bearing in steel axis 12mm UFL001 - ISB

UFL001EX-ISB
€9.60 (€7.93 tax excl.)
Oval support, in aluminum alloy with steel insert bearing UFL001, for 12mm diameter shaft. Self-aligning support with ball bearing inserted with eccentric ring for fixing, sheet metal seal with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL001 ECCENTRIC  Representative image...
Oval support in aluminum...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support in aluminum with eccentric bearing in steel axis 15mm UFL002 - ISB

UFL002EX-ISB
€9.73 (€8.04 tax excl.)
Oval support, in aluminum alloy with steel insert bearing UFL002, for 15mm diameter shaft. Self-aligning support with ball bearing inserted with eccentric ring for fixing, sheet metal seal with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL002 ECCENTRIC  Representative image...
Oval support in aluminum...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support in aluminum with eccentric bearing in steel axis 17mm UFL003 - ISB

UFL003EX-ISB
€9.74 (€8.05 tax excl.)
Oval support, in aluminum alloy with steel insert bearing UFL003, for 17mm diameter shaft. Self-aligning support with ball bearing inserted with eccentric ring for fixing, sheet metal seal with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL003 ECCENTRIC  Representative image...
Oval support in aluminium...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support in aluminium with eccentric bearing in steel axis 20mm UFL004 - ISB

UFL004EX-ISB
€15.43 (€12.75 tax excl.)
Oval support, in aluminum alloy with steel insert bearing UFL004, for 20mm diameter shaft. Self-aligning support with ball bearing inserted with eccentric ring for fixing, sheet metal seal with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL004 ECCENTRIC...
Oval support in aluminum...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support in aluminum with eccentric bearing in steel axis 25mm UFL005 - ISB

UFL005EX-ISB
€17.21 (€14.22 tax excl.)
Oval support, in aluminum alloy with steel insert bearing UFL005, for 25mm diameter shaft. Self-aligning support with ball bearing inserted with eccentric ring for fixing, sheet metal seal with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL005 ECCENTRIC  Representative image...
Oval support in aluminium...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support in aluminium with eccentric bearing in steel axis 30mm UFL006 - ISB

UFL006EX-ISB
€19.47 (€16.09 tax excl.)
Oval support, in aluminum alloy with steel insert bearing UFL006, for 30mm diameter shaft. Self-aligning support with ball bearing inserted with eccentric ring for fixing, sheet metal seal with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL006 ECCENTRIC  Representative image...
Oval support in aluminum...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support in aluminum with eccentric bearing in steel axis 35mm UFL007 - ISB

UFL007EX-ISB
€32.14 (€26.56 tax excl.)
Oval support, in aluminum alloy with steel insert bearing UFL007, for 35mm diameter shaft. Self-aligning support with ball bearing inserted with eccentric ring for fixing, sheet metal seal with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL007 ECCENTRIC  Representative image...
Showing 1-498 of 498 item(s)
Brackets and tensioners with bearings
Product added to wishlist