List of products by supplier Aignep

Angled seat valve 2 NC...
Valves with pneumatic actuators

Angled seat valve 2 NC actuator in INOX diameter 63 - Aignep

X1YXH10630
€327.35 (€270.54 tax excl.)
Normally closed (NC) simple acting inclined seat valve with 2" thread. PTFE gaskets which allow it to work in a wide range of temperatures in the fluid (-10ºC to +180ºC). The actuator body is manufactured in AISI 304 stainless steel and is pneumatically actuated. The valve can be installed in any mounting position, the body manufactured in the shape of a...
View
Centering tool for 40mm...
Flanges and branches for downpipes for compressed air installations

Centering tool for 40mm tube drill - Aignep

9024940
€34.10 (€28.18 tax excl.)
Tool or centering element for drilling holes in a 40mm outer diameter tube. This element allows the correct drilling of the tube to be carried out quickly, easily and centered on the desired point of the tube, for the subsequent placement of a flange for downspout or bypass flange for the 90247 series of the Aignep brand. Reference: 90249 40...
View
Angled seat valve 2 NC...
Valves with pneumatic actuators

Angled seat valve 2 NC actuator in INOX diameter 90 - Aignep

X1YXH10900
€381.91 (€315.63 tax excl.)
Normally closed (NC) simple acting inclined seat valve with 2" thread. PTFE gaskets which allow it to work in a wide range of temperatures in the fluid (-10ºC to +180ºC). The actuator body is manufactured in AISI 304 stainless steel and is pneumatically actuated. The valve can be installed in any mounting position, the body manufactured in the shape of a...
View
Centering tool for 50mm...
Flanges and branches for downpipes for compressed air installations

Centering tool for 50mm tube drill - Aignep

9024950
€49.01 (€40.50 tax excl.)
Tool or centering element for drilling holes in a 50mm outer diameter tube. This element allows the correct drilling of the tube to be carried out quickly, easily and centered on the desired point of the tube, for the subsequent placement of a flange for downspout or bypass flange for the 90247 series of the Aignep brand. Reference: 90249 50...
View
Angled seat valve 1/2 NC...
Valves with pneumatic actuators

Angled seat valve 1/2 NC actuator in technopolymer diameter 40 - Aignep

X2Y0510400
€86.45 (€71.45 tax excl.)
Normally closed (NC) simple acting inclined seat valve with 1/2 thread. PTFE gaskets which allow it to work in a wide range of temperatures in the fluid (-10ºC to +180ºC). The actuator body is made of technopolymer and is pneumatically actuated. The valve can be installed in any mounting position, the "Y" shaped body increases flow by 30% and increases...
View
Centering tool for 63mm...
Flanges and branches for downpipes for compressed air installations

Centering tool for 63mm tube drill - Aignep

9024963
€51.10 (€42.23 tax excl.)
Tool or centering element for drilling holes in a 63mm outer diameter tube. This element allows the correct drilling of the tube to be carried out quickly, easily and centered on the desired point of the tube, for the subsequent placement of a flange for downspout or bypass flange for the 90247 series of the Aignep brand. Reference: 90249 63...
View
Angled seat valve 1/2 NC...
Valves with pneumatic actuators

Angled seat valve 1/2 NC actuator in technopolymer diameter 50 - Aignep

X2Y0510500
€88.97 (€73.53 tax excl.)
Normally closed (NC) simple acting inclined seat valve with 1/2 thread. PTFE gaskets which allow it to work in a wide range of temperatures in the fluid (-10ºC to +180ºC). The actuator body is made of technopolymer and is pneumatically actuated. The valve can be installed in any mounting position, the "Y" shaped body increases flow by 30% and increases...
View
Digital Vacuum switch 2 PNP... Digital Vacuum switch 2 PNP... 2
Pressure switches, vacuum switches and flowmeters

Digital Vacuum switch 2 PNP outputs + 1 analog output - Aignep

PR02V02P2
€121.96 (€100.79 tax excl.)
Electronic Vacuum switch for digital measurement of the vacuum level, screen with display that shows the data in two possible colors (red or green) depending on the programmed conditions. It has two PNP type outputs and one analog output (4 ~ 20mA). Operating voltage 12-24Vdc. Large screen that allows easy reading of measurement units. IP65 protection...
View
Male straight Elbow union...
Straight fittings for compressed air installations

Male straight Elbow union 1/2 tube 25mm - Aignep

900102512
€9.52 (€7.87 tax excl.)
Straight union fitting with 1/2 conical male thread for 25mm outer diameter tube, body and nut made of nickel-plated brass. Automatic or "Push In" type fitting for quick and easy assembly in compressed air, vacuum and inert gas networks and installations. Reference: 90010 25 1/2 Representative image for illustrative purposes, the item supplied will...
Straight male Elbow union...
Straight fittings for compressed air installations

Straight male Elbow union 3/4 tube 25mm - Aignep

900102534
€9.52 (€7.87 tax excl.)
Straight union fitting with 3/4 conical male thread for 25mm outer diameter tube, body and nut made of nickel-plated brass. Automatic or "Push In" type fitting for quick and easy assembly in compressed air, vacuum and inert gas networks and installations. Reference: 90010 25 3/4 Representative image for illustrative purposes, the item supplied will...
Angled seat valve 1 1/4 NC...
Valves with pneumatic actuators

Angled seat valve 1 1/4 NC actuator in technopolymer - Aignep

X2YXF10800
€214.04 (€176.89 tax excl.)
Normally closed (NC) simple acting inclined seat valve with 1 1/4 thread. PTFE gaskets which allow it to work in a wide range of temperatures in the fluid (-10ºC to +180ºC). The actuator body is made of technopolymer and is pneumatically actuated. The valve can be installed in any mounting position, the "Y" shaped body increases flow by 30% and increases...
View
Male straight Elbow union 1...
Straight fittings for compressed air installations

Male straight Elbow union 1 tube 25mm - Aignep

90010251
€13.49 (€11.15 tax excl.)
Straight Elbow union with 1 conical male thread for 25mm outer diameter tube, body and nut made of nickel-plated brass. Automatic or “Push In” type fitting for quick and easy assembly in compressed air, vacuum and inert gas networks and installations. Reference: 90010 25 1 Representative image for illustrative purposes, the item supplied will correspond...
View
Angled seat valve 1 1/2 NC...
Valves with pneumatic actuators

Angled seat valve 1 1/2 NC actuator in technopolymer - Aignep

X2YXG10800
€239.22 (€197.70 tax excl.)
Normally closed (NC) simple acting inclined seat valve with 1 1/2 thread. PTFE gaskets which allow it to work in a wide range of fluid temperatures (-10ºC to +180ºC). The actuator body is made of technopolymer and is pneumatically actuated. The valve can be installed in any mounting position, the "Y" shaped body increases flow by 30% and increases the...
View
Showing 217-240 of 3389 item(s)
Product added to wishlist