List of products by brand Generico-AIR

Pneumatic cylinder accessories

Diameter axis 80 for ISO joint

Shaft (bolt) Ø80 to be mounted on ISO joints. Mounting on pneumatic cylinders.Reference: PC.080Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Pneumatic cylinder accessories

Diameter axis 125 for ISO joint

Generico-AIR

PC125

€6.95 (€5.74 tax excl.)

Shaft (bolt) Ø125 to be mounted on ISO joints. Mounting on pneumatic cylinders.Reference: PC.125Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Aluminum counter-plate for cylinder -80 AIRON - adajusa.es

Pneumatic cylinder accessories

Countercharnela aluminum cylinder diameter 80

Generico-AIR

AS080

€21.51 (€17.78 tax excl.)

Aluminum countercharnella for cylinder Ø80 ISO joints. Mounting on pneumatic cylinders.Reference: AS.080Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Aluminum counter-plate for cylinder -100 AIRON - adajusa.es

Pneumatic cylinder accessories

Countercharnela aluminum cylinder diameter 100

Generico-AIR

AS100

€32.31 (€26.70 tax excl.)

Aluminum countercharnella for cylinder Ø100 ISO joints. Mounting on pneumatic cylinders.Reference: AS.100Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Pneumatic cylinder accessories

Aluminum countercharnella for cylinder diameter 125

Generico-AIR

AS125

€55.19 (€45.61 tax excl.)

Aluminum countercharnella for cylinder Ø125 ISO joints. Mounting on pneumatic cylinders.Reference: AS.125Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Pack

Pneumatic cylinder accessories

Rear joint for cylinder diameter 63mm with axle

Generico-AIR

PK-CFPC63

€16.53 (€13.66 tax excl.)

Female rear joint for cylinder Ø63 manufactured according to ISO standard. Mounting on pneumatic cylinders. Made of aluminum. The supply includes the shaft.Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Aluminum counter-plate for cylinder - adajusa.es

Pneumatic cylinder accessories

Countercharnela aluminum cylinder diameter 63

Generico-AIR

AS063

€19.93 (€16.47 tax excl.)

Aluminum countercharnella for cylinder Ø63 ISO joints. Mounting on pneumatic cylinders.Reference: AS.63Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Rear female charnela for diameter cylinder 63 AIRON - adajusa

Pneumatic cylinder accessories

Charnela female rear cylinder diameter 63

Generico-AIR

CF063

€13.53 (€11.18 tax excl.)

Aluminum rear female charnela for cylinder Ø63 ISO joints. Mounting on pneumatic cylinders.Reference: CF.063Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Diameter shaft 63 for ISO AIRON articulation - adajusa.es

Pneumatic cylinder accessories

Diameter axis 63 for ISO joint

Generico-AIR

PC063

€3.00 (€2.48 tax excl.)

Shaft (bolt) Ø63 to be mounted on ISO joints. Mounting on pneumatic cylinders.Reference: PC.063Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Squadron fixing cylinder diameter 50 - ADAJUSA

Pneumatic cylinder accessories

Fixing Squad for cylinder diameter 50

Generico-AIR

PB050

€5.84 (€4.83 tax excl.)

Fixing Squad for pneumatic cylinder diameter 50mm. This fixing bracket is suitable for cylinders manufactured according to ISO 15552 - ISO 6431 of any brand. Reference: PB.050 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Front flange pneumatic cylinder 125 | ADAJUSA | price

Pneumatic cylinder accessories

Front fixing flange diameter 125

Generico-AIR

FV125

€82.39 (€68.09 tax excl.)

Front flange for fixing a 125mm diameter pneumatic cylinder. For ISO standard cylinders, made of steel. This flange is valid for cylinders manufactured according to ISO 15552 - ISO 6431 of any brand. Reference: FV.125 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Magnetic sensor hall PNP 3 wires with cable - ADAJUSA

Pneumatic cylinder accessories

Magnetic hall sensor PNP 3-wire with cable

Generico-AIR

SMTED

€27.95 (€23.10 tax excl.)

Magnetic sensor, magnetic detector, normally open (NO), with magnetic hall sensor and PNP transistor output, with 3-wire cable included. Cable length 3m. Valid for mounting on any cylinder with standard "T" type slot, such as ISO cylinders of the brands Metal Work, Mindman or Aignep. Part number: SMT.ED Representative image for illustrative purposes, the...

View

Magnetic sensor hall PNP (3 wires) connector - ADAJUSA

Pneumatic cylinder accessories

Magnetic hall sensor PNP 3-wire M8 connector

Generico-AIR

SMTEC

€37.13 (€30.69 tax excl.)

Magnetic sensor, magnetic detector, normally open (NO), with magnetic hall sensor and PNP transistor output, with 3-pin male M8 connector. Valid for mounting on any cylinder with standard "T" type slot, such as ISO cylinders of the brands Metal Work, Mindman or Aignep. Valid for mounting on ISO cylinders Metal Work, Mindman and Aignep, among...

Magnetic sensor reed (2 wires) connector M8 - Mindman - ADAJUSA

Pneumatic cylinder accessories

Magnetic reed sensor 2 wires 240Vac connector M8

Generico-AIR

SMT2CA

€27.95 (€23.10 tax excl.)

Magnetic sensor, magnetic detector, contacts 2-wire "reed" type, with 3-pin male M8 connector. This magnetic detector can work with voltages between 5 and 240Vac. Valid for mounting on any cylinder with standard "T" type slot, such as ISO cylinders of the brands Metal Work, Mindman or Aignep.Reference: SMT.2C.A Representative image for illustrative...

Magnetic sensor reed 2 wires with cable 3m - ADAJUSA

Pneumatic cylinder accessories

Magnetic reed sensor 2 wires with 3m cable

Generico-AIR

SMT2DA3M

€17.70 (€14.63 tax excl.)

Magnetic sensor, magnetic detector, contacts type "reed" 2-wire, with 5m cable included. Valid for mounting on any cylinder with standard "T" type slot, such as ISO cylinders of the brands Metal Work, Mindman or Aignep.Reference: SMT.2D Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Magnetic sensor reed 2 wire connector M8 - ADAJUSA

Pneumatic cylinder accessories

Magnetic reed sensor 2-wire M8 connector

Generico-AIR

SMT2C

€24.33 (€20.11 tax excl.)

Magnetic sensor, magnetic detector, contacts 2-wire "reed" type, with 3-pin male M8 connector. This magnetic detector can work with voltages between 5 and 120Vac. Valid for mounting on any cylinder with standard "T" type slot, such as ISO cylinders of the brands Metal Work, Mindman or Aignep. Part number: SMT.2C Representative image for illustrative...

Pneumatic cylinder rod ball joint 125 M27 | ADAJUSA | price

Pneumatic cylinder rod ball joint 125 M27 | ADAJUSA | price 2

Pneumatic cylinder accessories

Ball joint rod diameter 125 M27x2 maintenance free

Generico-AIR

SS27

€70.70 (€58.43 tax excl.)

Ball joint for pneumatic cylinder rod diameter 125 mm. Type GA-M, maintenance-free. Reference: SS.27 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Inserted tube spike diameter 6 to diameter 4 - ADAJUSA

Nipples and adapters for pneumatic connection

Spike inserted tube diameter 6 to diameter 4

Generico-AIR

RR410604

€1.92 (€1.59 tax excl.)

Reduction nipple inserted tube 6 to fitting 4. Allows the connection of a tube of 4 on a connection of 6. Representative image for illustrative purposes, the article supplied will correspond to the indicated specifications.

Inserted tube W8 spike to diameter Ø6 - ADAJUSA

Nipples and adapters for pneumatic connection

Spike inserted tube diameter 8 to diameter 6

Generico-AIR

RR410806

€2.18 (€1.80 tax excl.)

Spike reduction inserted tube 8 to fitting 6 Representative image for illustrative purposes, the article supplied will correspond to the indicated specifications.

Nipples and adapters for pneumatic connection

Spike inserted tube diameter 10 to diameter 8

Generico-AIR

RR411008

€2.87 (€2.37 tax excl.)

Spike reduction inserted tube 10 to fitting 8 Representative image for illustrative purposes, the article supplied will correspond to the indicated specifications.

Nipples and adapters for pneumatic connection

Spike inserted tube diameter 12 to diameter 10

Generico-AIR

RR411210

€3.80 (€3.14 tax excl.)

Reduction spike inserted tube diameter 12 to fitting 10SKU: RR41.12.10Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Showing 97-117 of 117 item(s)

List of products by brand Generico-AIR

Diameter axis 80 for ISO joint

Diameter axis 125 for ISO joint

Countercharnela aluminum cylinder diameter 80

Countercharnela aluminum cylinder diameter 100

Aluminum countercharnella for cylinder diameter 125

Rear joint for cylinder diameter 63mm with axle

Countercharnela aluminum cylinder diameter 63

Charnela female rear cylinder diameter 63

Diameter axis 63 for ISO joint

Fixing Squad for cylinder diameter 50

Front fixing flange diameter 125

Magnetic hall sensor PNP 3-wire with cable

Magnetic hall sensor PNP 3-wire M8 connector

Magnetic reed sensor 2 wires 240Vac connector M8

Magnetic reed sensor 2 wires with 3m cable

Magnetic reed sensor 2-wire M8 connector

Ball joint rod diameter 125 M27x2 maintenance free

Spike inserted tube diameter 6 to diameter 4

Spike inserted tube diameter 8 to diameter 6

Spike inserted tube diameter 10 to diameter 8

Spike inserted tube diameter 12 to diameter 10

Client support

Company information

Your Account

Follow us in our social