List of products by brand ISB

Triangular support in stamped sheet metal BPFT | Adajusa Triangular support in stamped sheet metal BPFT | Adajusa 2
Triangular support in stamped sheet

Triangular support 35mm shaft in stamped sheet metal BPFT series - ISB

BPFT35ISB
€3.52 (€2.91 tax excl.)
Triangular support valid for bearings with 35mm diameter shaft. Formed by two pieces made of stamped steel sheet. Self-aligning support for the insertion of ball bearings. Compatible with bearings of the SA2 and SB2 series of the brand ISB Part number: BPFT-35 Representative image for illustrative purposes, the item supplied will correspond to the...
Stamped sheet metal vertical support BPP | Adajusa Stamped sheet metal vertical support BPP | Adajusa 2
Stamped iron foot support

Stamped sheet metal vertical support shaft 12-15-17mm BPP Series - ISB

BPP121517-ISB
€1.43 (€1.18 tax excl.)
Bridge type support, valid for bearings with 12, 15 and 17mm diameter shaft. Formed by two pieces made of stamped steel sheet. Self-aligning support for the insertion of ball bearings.Compatible with bearings of the SA2 and SB2 series of the brand ISB Reference: BPP-12-15-17 Representative image for illustrative purposes, the item supplied will...
Needle roller bearings with ribs without inner ring single row NK 05 12 TN 5x10x12 ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 5/12 5x10x12 - ISB

NK0512TN
€6.40 (€5.29 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 5x10x12mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 5/12 TN Representative image for illustrative purposes,...
Needle roller bearings with ribs without inner ring single row NK 06 10 TN 6x12x10 ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 6/10 6x12x10 - ISB

NK0610TN
€6.58 (€5.44 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 6x12x10mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 6/10 TN Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK 06 12 TN 6x12x12 ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 6/12 6x12x12 - ISB

NK0612TN
€6.58 (€5.44 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 6x12x12mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 6/12 TN Representative image for illustrative purposes,...
Needle roller bearings with ribs without inner ring single row NK 07 10 TN 7x14x10 ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 7/10 7x14x10 - ISB

NK0710TN
€6.58 (€5.44 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 7x14x10mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 7/10 TN Representative image for illustrative purposes,...
Needle roller bearings with ribs without inner ring single row NK 07 12 TN 7x14x12 ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 7/12 7x14x12 - ISB

NK0712TN
€6.64 (€5.49 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 7x14x12mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 7/12 TN Representative image for illustrative purposes,...
Needle roller bearings with ribs without inner ring single row NK 08 12 TN 8x15x12 ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 8/12 8x15x12 - ISB

NK0812TN
€6.58 (€5.44 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 8x15x12mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 8/12 TN Representative image for illustrative purposes,...
Needle roller bearings with ribs without inner ring single row NK 09 12 TN 9x16x12 ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 9/12 9x16x12 - ISB

NK0912TN
€6.86 (€5.67 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 9x16x12mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 9/12 TN Representative image for illustrative purposes,...
Needle roller bearings with ribs without inner ring single row NK 09 16 TN 9x16x16 ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 9/16 9x16x16 - ISB

NK0916TN
€7.08 (€5.85 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 9x16x16mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 9/16 TN Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 20/20 20x28x20 - ISB

NK2020
€10.35 (€8.55 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 20x28x20mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 20/20 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 21/20 21x29x20 - ISB

NK2120
€10.97 (€9.07 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 21x29x20mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 21/20 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 22/16 22x30x16 - ISB

NK2216
€10.43 (€8.62 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 22x30x16mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 22/16 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 22/20 22x30x20 - ISB

NK2220
€11.29 (€9.33 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 22x30x20mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 22/20 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 24/16 24x32x16 - ISB

NK2416
€10.76 (€8.89 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 24x32x16mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 24/16 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 24/20 24x32x20 - ISB

NK2420
€11.97 (€9.89 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 24x32x20mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 24/20 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 25/16 25x33x16 - ISB

NK2516
€10.76 (€8.89 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 25x33x16mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 25/16 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 25/20 25x33x20 - ISB

NK2520
€12.18 (€10.07 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 25x33x20mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 25/20 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 26/16 26x34x16 - ISB

NK2616
€11.37 (€9.40 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 26x34x16mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 26/16 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 26/20 26x34x20 - ISB

NK2620
€12.28 (€10.15 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 26x34x20mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 26/20 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 28/20 28x37x20 - ISB

NK2820
€12.28 (€10.15 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 28x37x20mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 28/20 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 29/20 29x38x20 - ISB

NK2920
€12.93 (€10.69 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 29x38x20mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 29/20 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 29/30 29x38x30 - ISB

NK2930
€15.09 (€12.47 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 29x38x30mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 29/30 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 30/30 30x40x30 - ISB

NK3030
€15.29 (€12.64 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 30x40x30mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 30/30 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 32/20 32x42x20 - ISB

NK3220
€13.20 (€10.91 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 32x42x20mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 32/20 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 32/30 32x42x30 - ISB

NK3230
€15.75 (€13.02 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 32x42x30mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 32/30 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 35/20 35x45x20 - ISB

NK3520
€13.84 (€11.44 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 35x45x20mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 35/20 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 35/30 35x45x30 - ISB

NK3530
€16.27 (€13.45 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 35x45x30mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 35/30 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 37/20 37x47x20 - ISB

NK3720
€14.65 (€12.11 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 37x47x20mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 37/20 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 37/30 37x47x30 - ISB

NK3730
€17.88 (€14.78 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 37x47x30mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 37/30 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 38/20 38x48x20 - ISB

NK3820
€14.82 (€12.25 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 38x48x20mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 38/20 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 38/30 38x48x30 - ISB

NK3830
€23.04 (€19.04 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 38x48x30mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 38/30 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 40/20 40x50x20 - ISB

NK4020
€15.31 (€12.65 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 40x50x20mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 40/20 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 40/30 40x50x30 - ISB

NK4030
€18.94 (€15.65 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 40x50x30mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 40/30 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 42/20 42x52x20 - ISB

NK4220
€16.64 (€13.75 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 42x52x20mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 42/20 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 42/30 42x52x30 - ISB

NK4230
€20.46 (€16.91 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 42x52x30mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 42/30 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 43/20 43x53x20 - ISB

NK4320
€17.23 (€14.24 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 43x53x20mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 43/20 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 43/30 43x53x30 - ISB

NK4330
€21.08 (€17.42 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 43x53x30mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 43/30 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 45/20 45x55x20 - ISB

NK4520
€18.21 (€15.05 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 45x55x20mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 45/20 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 45/30 45x55x30 - ISB

NK4530
€22.00 (€18.18 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 45x55x30mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 45/30 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 47/20 47x57x20 - ISB

NK4720
€19.60 (€16.20 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 47x57x20mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 47/20 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 47/30 47x57x30 - ISB

NK4730
€23.53 (€19.45 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 47x57x30mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 47/30 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 50/25 50x62x25 - ISB

NK5025
€20.86 (€17.24 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 50x62x25mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 50/25 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 50/35 50x62x35 - ISB

NK5035
€25.14 (€20.78 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 50x62x35mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 50/35 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 55/25 55x68x25 - ISB

NK5525
€25.60 (€21.16 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 55x68x25mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 55/25 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 55/35 55x68x35 - ISB

NK5535
€30.54 (€25.24 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 55x68x35mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 55/35 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 60/25 60x72x25 - ISB

NK6025
€29.20 (€24.13 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 60x72x25mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 60/25 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 60/35 60x72x35 - ISB

NK6035
€34.87 (€28.82 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 60x72x35mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 60/35 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 65/25 65x78x25 - ISB

NK6525
€32.34 (€26.73 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 65x78x25mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 65/25 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 65/35 65x78x35 - ISB

NK6535
€40.46 (€33.44 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 65x78x35mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 65/35 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 68/25 68x82x25 - ISB

NK6825
€35.33 (€29.20 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 68x82x25mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 68/25 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 68/35 68x82x35 - ISB

NK6835
€43.27 (€35.76 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 68x82x35mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 68/35 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 70/25 70x85x25 - ISB

NK7025
€37.84 (€31.27 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 70x85x25mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 70/25 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 70/35 70x85x35 - ISB

NK7035
€46.57 (€38.49 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 70x85x35mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 70/35 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 73/25 73x90x25 - ISB

NK7325
€44.13 (€36.47 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 73x90x25mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 73/25 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 73/35 73x90x35 - ISB

NK7335
€54.27 (€44.85 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 73x90x35mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 73/35 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 75/25 75x92x25 - ISB

NK7525
€46.71 (€38.60 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 75x92x25mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 75/25 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 75/35 75x92x35 - ISB

NK7535
€64.86 (€53.60 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 75x92x35mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 75/35 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 80/25 80x95x25 - ISB

NK8025
€48.64 (€40.20 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 80x95x25mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 80/25 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 80/35 80x95x35 - ISB

NK8035
€60.63 (€50.11 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 80x95x35mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 80/35 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 85/25 85x105x25 - ISB

NK8525
€57.79 (€47.76 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 85x105x25mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 85/25 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 85/35 85x105x35 - ISB

NK8535
€68.14 (€56.31 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 85x105x35mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 85/35 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 90/25 90x110x25 - ISB

NK9025
€65.07 (€53.78 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 90x110x25mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 90/25 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 90/35 90x110x35 - ISB

NK9035
€79.42 (€65.64 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 90x110x35mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 90/35 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 95/26 95x115x26 - ISB

NK9526
€74.49 (€61.56 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 95x115x26mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 95/26 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 95/36 95x115x36 - ISB

NK9536
€87.41 (€72.24 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 95x115x36mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 95/36 Representative image for illustrative purposes,...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 105/36 105x125x36 - ISB

NK10536
€128.07 (€105.84 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 105x125x36mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 105/36 Representative image for illustrative...
Needle roller bearings with rims without inner ring single row NK ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 110/40 110x130x40 - ISB

NK11040
€124.76 (€103.11 tax excl.)
Needle roller bearings (needle sleeve) single row with flanges and without inner ring, dimensions 110x130x40mm. NK needle roller bearings without an inner race, the needle roller and outer ring, form a self-retaining unit, using this bearing, for when the shaft can be hardened and ground. Reference: NK 110/40 Representative image for illustrative...
Vertical support in stamped sheet metal BPP with SA201 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Stamped sheet metal foot support with bearing SA201-2RS 12mm shaft - ISB

BPP121517-SA201-ISB
€7.04 (€5.82 tax excl.)
Stamped sheet steel support or bridge type with eccentric bearing insert, for 12mm diameter shaft. Self-aligning support with single-row ball bearing, single-sided collar and eccentric ring fixing, made of steel with two rubber sealing caps (2RS) for closure. Allows to compensate alignment defects Part no.: BPP-12-15-17 + SA201-2RS Representative image...
Vertical support in stamped sheet metal BPP with SA201 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Stamped sheet metal foot support with bearing SB201-2RS shaft 12mm - ISB

BPP121517-SB201-ISB
€6.16 (€5.09 tax excl.)
Stamped sheet metal support or bridge type with bearing insert, for 12mm diameter shaft. Self-aligning support with single-row ball bearing, single-sided collar and grub screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPP-12-15-17 + SB201-2RS Representative image for illustrative...
Vertical support in stamped sheet metal BPP with SA202 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Stamped sheet metal foot support with bearing SA202-2RS shaft 15mm - ISB

BPP121517-SA202-ISB
€7.15 (€5.91 tax excl.)
Stamped sheet steel support or bridge type with eccentric bearing insert, for 15mm diameter shaft. Self-aligning support with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for locking. Allows to compensate alignment defects Part no.: BPP-12-15-17 + SA202-2RS Representative...
Vertical support in stamped sheet metal BPP with bearing SA203 | Adajusa
  • Pack
Brackets and tensioners with bearings

Stamped sheet metal foot support with SA203-2RS bearing - 17mm shaft ISB

BPP121517-SA203-ISB
€7.30 (€6.03 tax excl.)
Stamped sheet steel support or bridge type with eccentric bearing insert, for 17mm diameter shaft. Self-aligning support with single-row ball bearing, single-sided collar and eccentric ring fixing, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPP-12-15-17 + SA203-2RS Representative image...
Vertical support in stamped sheet metal BPP with bearing SA203 | Adajusa
  • Pack
Brackets and tensioners with bearings

Stamped sheet metal foot bracket with SA204-2RS bearing - 20mm shaft ISB

BPP20-SA204-ISB
€7.61 (€6.29 tax excl.)
Stamped sheet steel support or bridge type with eccentric bearing insert, for 20mm diameter shaft. Self-aligning support with single-row ball bearing, single-sided collar and eccentric ring fixing, made of steel with two rubber sealing caps (2RS) for closing. Allows to compensate alignment defects Part no.: BPP-20 + SA204-2RS Representative image for...
Vertical support in stamped sheet metal BPP with bearing SA203 | Adajusa
  • Pack
Brackets and tensioners with bearings

Stamped sheet metal foot bracket with bearing SA205-2RS 25mm shaft - ISB

BPP25-SA205-ISB
€9.63 (€7.96 tax excl.)
Stamped sheet steel support or bridge type with eccentric bearing insert, for 25mm diameter shaft. Self-aligning support with single-row ball bearing, single-sided collar and eccentric ring fixing, made of steel with two rubber sealing caps (2RS) for closure. Allows to compensate alignment defects Part no.: BPP-25 + SA205-2RS Representative image for...
Vertical support in stamped sheet metal BPP with SA206 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Stamped sheet metal foot support with bearing SA206-2RS shaft 30mm - ISB

BPP30-SA206-ISB
€12.08 (€9.98 tax excl.)
Stamped sheet steel support or bridge type with eccentric bearing insert, for 30mm diameter shaft. Self-aligning support with single-row ball bearing, single-sided collar and eccentric ring fixing, made of steel with two rubber sealing caps (2RS) for closure. Allows to compensate alignment defects Part no.: BPP-30 + SA206-2RS Representative image for...
Stamped sheet metal vertical support BPP with SA207 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Stamped sheet metal foot support with bearing SA207-2RS shaft 35mm - ISB

BPP35-SA207-ISB
€13.09 (€10.82 tax excl.)
Stamped sheet steel support or bridge type with eccentric bearing insert, for 35mm diameter shaft. Self-aligning support with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for locking. Allows to compensate alignment defects Part No.: BPP-35 + SA207-2RS Representative image for...
Stamped sheet metal vertical support BPP with SA208 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Stamped sheet metal foot bracket with SA208-2RS bearing - 40mm shaft ISB

BPP40-SA208-ISB
€18.95 (€15.66 tax excl.)
Stamped sheet steel support or bridge type with eccentric bearing insert, for 40mm diameter shaft. Self-aligning support with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for closure. Allows to compensate alignment defects Part no.: BPP-40 + SA208-2RS Representative image for...
Stamped sheet metal vertical support BPP with SA202 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Stamped sheet metal foot bracket with bearing SB202-2RS shaft 15mm - ISB

BPP121517-SB202-ISB
€6.18 (€5.11 tax excl.)
Stamped sheet metal support or bridge type with bearing insert, for 15mm diameter shaft. Self-aligning support with single-row ball bearing, single-sided collar and grub screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPP-12-15-17 + SB202-2RS Representative image for illustrative...
Stamped sheet metal vertical support BPP with SA203 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Stamped sheet metal foot support with bearing SB203-2RS - 17mm shaft ISB

BPP121517-SB203-ISB
€6.45 (€5.33 tax excl.)
Stamped sheet metal support or bridge type with bearing insert, for 17mm diameter shaft. Self-aligning support with single-row ball bearing, single-sided collar and grub screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPP-12-15-17 + SB203-2RS Representative image for illustrative...
Stamped sheet metal vertical support BPP with SA204 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Stamped sheet metal foot bracket with bearing SB204-2RS 20mm shaft - ISB

BPP20-SB204-ISB
€6.84 (€5.65 tax excl.)
Stamped sheet metal support or bridge type with bearing insert, for 20mm diameter shaft. Self-aligning support with single-row ball bearing, single-sided collar and grub screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPP-20 + SB204-2RS Representative image for illustrative...
Vertical support in stamped sheet metal BPP with SA205 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Stamped sheet metal foot bracket with bearing SB205-2RS shaft 25mm - ISB

BPP25-SB205-ISB
€7.24 (€5.98 tax excl.)
Stamped sheet metal support or bridge type with bearing insert, for 25mm diameter shaft. Self-aligning support with single-row ball bearing, single-sided collar and grub screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPP-25 + SB205-2RS Representative image for illustrative purposes,...
Vertical support in stamped sheet metal BPP with SA206 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Stamped sheet metal foot bracket with bearing SB206-2RS shaft 30mm - ISB

BPP30-SB206-ISB
€10.77 (€8.90 tax excl.)
Stamped sheet metal support or bridge type with bearing insert, for 30mm diameter shaft. Self-aligning support with single-row ball bearing, single-sided collar and grub screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPP-30 + SB206-2RS Representative image for illustrative...
Needle roller bearings with inner ring and single row NKI ISB | ADAJUSA
Needle roller bearings with inner race ISB

Needle roller bearings NKI 100/40 100x130x40 - ISB

NKI10040
€188.68 (€155.93 tax excl.)
Needle roller bearings with machined rings. Single row with edges and with track (inner ring) dimensions 100x130x40mm. Needle roller bearings with an inner ring are used when the shaft is not manufactured as a bearing raceway. Reference: NKI 100/40 Representative image for illustrative purposes, the supplied article will correspond to the indicated...
Stamped sheet metal vertical support BPP with SA207 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Stamped sheet metal foot bracket with bearing SB207-2RS 35mm shaft - ISB

BPP35-SB207-ISB
€11.66 (€9.64 tax excl.)
Stamped sheet metal support or bridge type with bearing insert, for 35mm diameter shaft. Self-aligning support with single-row ball bearing, single-sided collar and grub screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part No.: BPP-35 + SB207-2RS Representative image for illustrative purposes,...
Stamped sheet metal vertical support BPP with SA208 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Stamped sheet metal foot support with SB208-2RS bearing - 40mm shaft ISB

BPP40-SB208-ISB
€19.34 (€15.98 tax excl.)
Stamped sheet metal support or bridge type with bearing insert, for 40mm diameter shaft. Self-aligning support with single-row ball bearing, single-sided collar and grub screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPP-40 + SB208-2RS Representative image for illustrative purposes,...
Round support in stamped sheet metal BPP with SA201 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Round support in stamped sheet metal with bearing SA201-2RS shaft 12mm - ISB

BPF121517-SA201-ISB
€7.18 (€5.93 tax excl.)
Round housing in stamped sheet metal with eccentric bearing insert, for 12mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring fixing, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPF-12-15-17 + SA201-2RS Representative image for...
BPF stamped sheet metal round support with SA201 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Round support in stamped sheet metal with bearing SB201-2RS shaft 12mm - ISB

BPF121517-SB201-ISB
€6.29 (€5.20 tax excl.)
Round housing in stamped sheet metal with bearing insert, for 12mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and set screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPF-12-15-17 + SB201-2RS Representative image for illustrative purposes,...
Round support in stamped sheet metal BPP with SA202 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Round support in stamped sheet metal with bearing SA202-2RS shaft 15mm - ISB

BPF121517-SA202-ISB
€7.28 (€6.02 tax excl.)
Round housing in stamped sheet metal with eccentric bearing insert, for 15mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defectsPart no.: BPF-12-15-17 + SA202-2RS Representative image for...
Stamped sheet metal round support BPP with bearing SA203 | Adajusa
  • Pack
Brackets and tensioners with bearings

Round support in stamped sheet metal with bearing SA203-2RS shaft 17mm - ISB

BPF121517-SA203-ISB
€7.43 (€6.14 tax excl.)
Round housing in stamped sheet metal with eccentric bearing insert, for shaft diameter 17mm. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPF-12-15-17 + SA203-2RS Representative image for...
Stamped sheet metal round support BPP with bearing SA203 | Adajusa
  • Pack
Brackets and tensioners with bearings

Round support in stamped sheet metal with bearing SA204-2RS 20mm shaft - ISB

BPF20-SA204-ISB
€8.08 (€6.68 tax excl.)
Round housing in stamped sheet metal with eccentric bearing insert, for shaft diameter 20mm. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPF-20 + SA204-2RS Representative image for...
BPF stamped sheet metal round support with SA205 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Round support in stamped sheet metal with bearing SA205-2RS shaft 25mm - ISB

BPF25-SA205-ISB
€10.09 (€8.34 tax excl.)
Round housing in stamped sheet metal with eccentric bearing insert, for 25mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPF-25 + SA205-2RS Representative image for...
BPF stamped sheet metal round bracket with SA206 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Round support in stamped sheet metal with bearing SA206-2RS shaft 30mm - ISB

BPF30-SA206-ISB
€13.44 (€11.11 tax excl.)
Round housing in stamped sheet metal with eccentric bearing insert, for shaft diameter 30mm. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPF-30 + SA206-2RS Representative image for...
BPF stamped sheet metal round bracket with bearing SA207 | Adajusa
  • Pack
Brackets and tensioners with bearings

Round support in stamped sheet metal with bearing SA207-2RS shaft 35mm - ISB

BPF35-SA207-ISB
€14.41 (€11.91 tax excl.)
Round housing in stamped sheet metal with eccentric bearing insert, for 35 mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part No.: BPF-35 + SA207-2RS Representative image for...
BPF stamped sheet metal round bracket with SA208 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Round support in stamped sheet metal with bearing SA208-2RS shaft 40mm - ISB

BPF40-SA208-ISB
€23.30 (€19.26 tax excl.)
Round housing in stamped sheet metal with eccentric bearing insert, for 40 mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPF-40 + SA208-2RS Representative image for...
BPF stamped sheet metal round support with bearing SA202 | Adajusa
  • Pack
Brackets and tensioners with bearings

Round support in stamped sheet metal with bearing SB202-2RS - 15mm shaft ISB

BPF121517-SB202-ISB
€6.32 (€5.22 tax excl.)
Round housing in stamped sheet metal with bearing insert, for 15mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and set screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPF-12-15-17 + SB202-2RS Representative image for illustrative purposes,...
BPF stamped sheet metal round support with bearing SA203 | Adajusa
  • Pack
Brackets and tensioners with bearings

Round support in stamped sheet metal with bearing SB203-2RS - 17mm shaft ISB

BPF121517-SB203-ISB
€6.58 (€5.44 tax excl.)
Round housing in stamped sheet metal with bearing insert, for 17mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and set screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPF-12-15-17 + SB203-2RS Representative image for illustrative purposes,...
BPF stamped sheet metal round bracket with SA204 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Round support in stamped sheet metal with bearing SB204-2RS 20mm shaft - ISB

BPF20-SB204-ISB
€7.31 (€6.04 tax excl.)
Round housing in stamped sheet metal with bearing insert, for 20mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and set screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPF-20 + SB204-2RS Representative image for illustrative purposes, the...
BPF stamped sheet metal round support with SA205 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Round support in stamped sheet metal with bearing SB205-2RS - 25mm shaft ISB

BPF25-SB205-ISB
€7.70 (€6.36 tax excl.)
Round housing in stamped sheet metal with bearing insert, for 25mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and grub screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPF-25 + SB205-2RS Representative image for illustrative purposes, the...
BPF stamped sheet metal round bracket with SA206 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Round support in stamped sheet metal with bearing SB206-2RS shaft 30mm - ISB

BPF30-SB206-ISB
€12.14 (€10.03 tax excl.)
Round housing in stamped sheet metal with bearing insert, for shaft diameter 30mm. Self-aligning housing with single-row ball bearing, single-sided collar and set screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPF-30 + SB206-2RS Representative image for illustrative purposes, the...
BPF stamped sheet metal round bracket with bearing SA207 | Adajusa
  • Pack
Brackets and tensioners with bearings

Stamped sheet metal round support with SB207-2RS bearing - 35mm shaft ISB

BPF35-SB207-ISB
€12.98 (€10.73 tax excl.)
Round housing in stamped sheet metal with bearing insert, for 35 mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and set screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part No.: BPF-35 + SB207-2RS Representative image for illustrative purposes, the...
BPF stamped sheet metal round bracket with SA208 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Round support in stamped sheet metal with bearing SB208-2RS - 40mm shaft ISB

BPF40-SB208-ISB
€23.30 (€19.26 tax excl.)
Round housing in stamped sheet metal with bearing insert, for 40 mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and set screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPF-40 + SB208-2RS Representative image for illustrative purposes, the...
Oval support in stamped sheet metal BPFL with SA201 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Oval support in stamped sheet metal with bearing SA201-2RS 12mm shaft - ISB

BPFL121517-SA201-ISB
€6.87 (€5.68 tax excl.)
Oval housing in stamped sheet metal with eccentric bearing insert, for 12mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPFL-12-15-17 + SA201-2RS Representative image for...
BPFL stamped sheet metal round bracket with SB201 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Oval support in stamped sheet metal with bearing SB201-2RS shaft 12mm - ISB

BPFL121517-SB201-ISB
€5.99 (€4.95 tax excl.)
Oval housing in stamped sheet metal with bearing insert, for 12mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and set screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPFL-12-15-17 + SB201-2RS Representative image for illustrative purposes,...
BPFL stamped sheet metal oval housing with SA202 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Oval support in stamped sheet metal with bearing SA202-2RS shaft 15mm - ISB

BPFL121517-SA202-ISB
€6.98 (€5.77 tax excl.)
Oval housing in stamped sheet metal with eccentric bearing insert, for 15mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring fixing, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPFL-12-15-17 + SA202-2RS Representative image for...
Oval support in stamped sheet metal BPFL with SA203 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Oval support in stamped sheet metal with SA203-2RS bearing - 17mm shaft ISB

BPFL121517-SA203-ISB
€7.13 (€5.89 tax excl.)
Oval housing in stamped sheet metal with eccentric bearing insert, for shaft diameter 17mm. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPFL-12-15-17 + SA203-2RS Representative image for...
Oval support in stamped sheet metal BPFL with SA204 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Oval support in stamped sheet metal with SA204-2RS bearing - 20mm shaft ISB

BPFL20-SA204-ISB
€7.28 (€6.02 tax excl.)
Oval housing in stamped sheet metal with eccentric bearing insert, for 20mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPFL-20 + SA204-2RS Representative image for...
BPFL stamped sheet metal oval housing with SA205 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Oval support in stamped sheet metal with bearing SA205-2RS shaft 25mm - ISB

BPFL25-SA205-ISB
€9.49 (€7.84 tax excl.)
Oval housing in stamped sheet metal with eccentric bearing insert, for 25mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPFL-25 + SA205-2RS Representative image for...
Oval support in stamped sheet metal BPFL with bearing SA206 | Adajusa
  • Pack
Brackets and tensioners with bearings

Oval support in stamped sheet metal with bearing SA206-2RS shaft 30mm - ISB

BPFL30-SA206-ISB
€11.45 (€9.46 tax excl.)
Oval housing in stamped sheet metal with eccentric bearing insert, for shaft diameter 30mm. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPFL-30 + SA206-2RS Representative image for...
Oval support in stamped sheet metal BPFL with SA207 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Oval support in stamped sheet metal with bearing SA207-2RS shaft 35mm - ISB

BPFL35-SA207-ISB
€12.39 (€10.24 tax excl.)
Oval housing in stamped sheet metal with eccentric bearing insert, for 35 mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring fixing, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part No.: BPFL-35 + SA207-2RS Representative image for...
BPFL stamped sheet metal oval housing with SA208 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Oval support in stamped sheet metal with SA208-2RS bearing - 40mm shaft ISB

BPFL40-SA208-ISB
€18.73 (€15.48 tax excl.)
Oval housing in stamped sheet metal with eccentric bearing insert, for 40 mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPFL-40 + SA208-2RS Representative image for...
BPFL stamped sheet metal round bracket with SB202 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Oval support in stamped sheet metal with bearing SB202-2RS shaft 15mm - ISB

BPFL121517-SB202-ISB
€6.01 (€4.97 tax excl.)
Oval housing in stamped sheet metal with bearing insert, for 15mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and grub screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPFL-12-15-17 + SB202-2RS Representative image for illustrative purposes,...
BPFL stamped sheet metal round support with bearing SB203 | Adajusa
  • Pack
Brackets and tensioners with bearings

Oval support in stamped sheet metal with bearing SB203-2RS - 17mm shaft ISB

BPFL121517-SB203-ISB
€6.28 (€5.19 tax excl.)
Oval housing in stamped sheet metal with bearing insert, for 17mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and set screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPFL-12-15-17 + SB203-2RS Representative image for illustrative purposes,...
BPFL stamped sheet metal round support with bearing SB204 | Adajusa
  • Pack
Brackets and tensioners with bearings

Oval support in stamped sheet metal with bearing SB204-2RS - 20mm shaft ISB

BPFL20-SB204-ISB
€6.51 (€5.38 tax excl.)
Oval housing in stamped sheet metal with bearing insert, for 20mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and grub screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPFL-20 + SB204-2RS Representative image for illustrative purposes, the...
BPFL stamped sheet metal round bracket with SB205 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Oval support in stamped sheet metal with bearing SB205-2RS - 25mm shaft ISB

BPFL25-SB205-ISB
€7.09 (€5.86 tax excl.)
Oval housing in stamped sheet metal with bearing insert, for 25mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and set screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPFL-25 + SB205-2RS Representative image for illustrative purposes, the...
BPFL stamped sheet metal round bracket with SB206 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Oval support in stamped sheet metal with bearing SB206-2RS - 30mm shaft ISB

BPFL30-SB206-ISB
€10.14 (€8.38 tax excl.)
Oval housing in stamped sheet metal with bearing insert, for 30 mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and set screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPFL-30 + SB206-2RS Representative image for illustrative purposes, the...
BPFL stamped sheet metal round housing with SB206 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Oval support in stamped sheet metal with bearing SB207-2RS shaft 35mm - ISB

BPFL35-SB207-ISB
€10.96 (€9.06 tax excl.)
Oval housing in stamped sheet metal with bearing insert, for 35 mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and set screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part No.: BPFL-35 + SB207-2RS Representative image for illustrative purposes, the...
BPFL stamped sheet metal round bracket with SB208 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Oval support in stamped sheet metal with SB208-2RS bearing - 40mm shaft ISB

BPFL40-SB208-ISB
€19.12 (€15.80 tax excl.)
Oval housing in stamped sheet metal with bearing insert, for 40 mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and set screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPFL-40 + SB208-2RS Representative image for illustrative purposes, the...
Triangular support in stamped sheet metal BPFT with bearing SA201 :: - Triangular support in stamped plate BPFT with bearing SA2
  • Pack
Brackets and tensioners with bearings

Triangular support in stamped sheet metal with bearing SA201-2RS - 12mm shaft ISB

BPFT121517-SA201-ISB
€6.80 (€5.62 tax excl.)
Triangular housing in stamped sheet metal with eccentric bearing insert, for 12mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPFT-12-15-17 + SA201-2RS Representative...
Soporte triangular en chapa estampada BPFT con rodamiento SB201 | Adajusa
  • Pack
Brackets and tensioners with bearings

Triangular support in stamped sheet metal with bearing SB201-2RS - 12mm shaft ISB

BPFT121517-SB201-ISB
€5.92 (€4.89 tax excl.)
Triangular support in stamped sheet metal with bearing insert, for 12mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and set screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPFT-12-15-17 + SB201-2RS Representative image for illustrative...
Triangular support in stamped sheet metal BPFT with bearing SA202 | Adajusa
  • Pack
Brackets and tensioners with bearings

Triangular support in stamped sheet metal with bearing SA202-2RS 15mm shaft - ISB

BPFT121517-SA202-ISB
€6.91 (€5.71 tax excl.)
Triangular housing in stamped sheet metal with eccentric bearing insert, for 15mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring fixing, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPFT-12-15-17 + SA202-2RS Representative image...
Triangular support in stamped sheet metal BPFT with bearing SA202 | Adajusa
  • Pack
Brackets and tensioners with bearings

Triangular support in stamped sheet metal with bearing SA203-2RS - 17mm shaft ISB

BPFT121517-SA203-ISB
€7.05 (€5.83 tax excl.)
Triangular housing in stamped sheet metal with eccentric bearing insert, for shaft diameter 17mm. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPFT-12-15-17 + SA203-2RS Representative image...
Triangular support in stamped sheet metal BPFT with SA204 bearing | Adajusa
  • Pack
Brackets and tensioners with bearings

Triangular support in stamped sheet metal with SA204-2RS bearing - 20mm shaft ISB

BPFT20-SA204-ISB
€7.37 (€6.09 tax excl.)
Triangular housing in stamped sheet metal with eccentric bearing insert, for 20mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPFT-20 + SA204-2RS Representative image for...
Triangular support in stamped sheet metal BPFT with bearing SA205 | Adajusa
  • Pack
Brackets and tensioners with bearings

Triangular support in stamped sheet metal with bearing SA205-2RS shaft 25mm - ISB

BPFT25-SA205-ISB
€9.41 (€7.78 tax excl.)
Triangular housing in stamped sheet metal with eccentric bearing insert, for shaft diameter 25mm. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring fixing, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPFT-25 + SA205-2RS Representative image for...
Triangular support in stamped sheet metal BPFT with bearing SA206 | Adajusa
  • Pack
Brackets and tensioners with bearings

Triangular housing in stamped sheet metal with eccentric bearing insertSA205-2RS eje...

BPFT30-SA206-ISB
€12.45 (€10.29 tax excl.)
Triangular housing in stamped sheet metal with eccentric bearing insert, for shaft diameter 30mm. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring fixing, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part no.: BPFT-30 + SA206-2RS Representative image for...
Triangular support in stamped sheet metal BPFT with bearing SA206 | Adajusa
  • Pack
Brackets and tensioners with bearings

Triangular support in stamped sheet metal with bearing SA207-2RS shaft 35mm - ISB

BPFT35-SA207-ISB
€13.09 (€10.82 tax excl.)
Triangular housing in stamped sheet metal with eccentric bearing insert, for 35 mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and eccentric ring locking, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects Part No.: BPFT-35 + SA207-2RS Representative image for...
Soporte triangular en chapa estampada BPFT con rodamiento SB201 | Adajusa
  • Pack
Brackets and tensioners with bearings

Triangular support in stamped sheet metal with bearing SB202-2RS - 15mm shaft ISB

BPFT121517-SB202-ISB
€5.94 (€4.91 tax excl.)
Triangular support in stamped sheet metal with bearing insert, for 15mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and grub screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPFT-12-15-17 + SB202-2RS Representative image for illustrative...
Soporte triangular en chapa estampada BPFT con rodamiento SB201 | Adajusa
  • Pack
Brackets and tensioners with bearings

Triangular support in stamped sheet metal with bearing SB203-2RS - 17mm shaft ISB

BPFT121517-SB203-ISB
€6.21 (€5.13 tax excl.)
Triangular support in stamped sheet metal with bearing insert, for 17mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and set screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPFT-12-15-17 + SB203-2RS Representative image for illustrative...
Soporte triangular en chapa estampada BPFT con rodamiento SB201 | Adajusa
  • Pack
Brackets and tensioners with bearings

Triangular support in stamped sheet metal with bearing SB204-2RS shaft 20mm - ISB

BPFT20-SB204-ISB
€6.59 (€5.45 tax excl.)
Triangular support in stamped sheet metal with bearing insert, for 20mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and set screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPFT-20 + SB204-2RS Representative image for illustrative purposes,...
Soporte triangular en chapa estampada BPFT con rodamiento SB201 | Adajusa
  • Pack
Brackets and tensioners with bearings

Triangular support in stamped sheet metal with bearing SB205-2RS - 25mm shaft ISB

BPFT25-SB205-ISB
€7.02 (€5.80 tax excl.)
Triangular support in stamped sheet metal with bearing insert, for 25mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and grub screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPFT-25 + SB205-2RS Representative image for illustrative purposes,...
Soporte triangular en chapa estampada BPFT con rodamiento SB201 | Adajusa
  • Pack
Brackets and tensioners with bearings

Triangular support in stamped sheet metal with bearing SB206-2RS - 30mm shaft ISB

BPFT30-SB206-ISB
€11.14 (€9.21 tax excl.)
Triangular support in stamped sheet metal with bearing insert, for shaft diameter 30mm. Self-aligning housing with single-row ball bearing, single-sided collar and grub screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part no.: BPFT-30 + SB206-2RS Representative image for illustrative purposes,...
Soporte triangular en chapa estampada BPFT con rodamiento SB201 | Adajusa
  • Pack
Brackets and tensioners with bearings

Triangular support in stamped sheet metal with bearing SB207-2RS shaft 35mm - ISB

BPFT35-SB207-ISB
€11.66 (€9.64 tax excl.)
Triangular support in stamped sheet metal with bearing insert, for 35 mm diameter shaft. Self-aligning housing with single-row ball bearing, single-sided collar and set screw, made of steel with two rubber sealing caps (2RS) for sealing. Allows to compensate alignment defects. Part No.: BPFT-35 + SB207-2RS Representative image for illustrative...
Brackets and tensioners with bearings

Tension support with 17mm shaft bearing UCT203 - ISB

UCT203-ISB
€8.23 (€6.80 tax excl.)
Cast iron tensioner support with UC203 inserted bearing for 17mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCT203  Representative...
Brackets and tensioners with bearings

Tension support with 20mm shaft bearing UCT204 - ISB

UCT204-ISB
€7.80 (€6.45 tax excl.)
Cast iron tensioner support with UC204 inserted bearing for 20mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCT204  Representative...
Brackets and tensioners with bearings

Tension support with 25mm shaft bearing UCT205 - ISB

UCT205-ISB
€8.55 (€7.07 tax excl.)
Cast iron tensioner support with UC205 inserted bearing for 25mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCT205  Representative...
Brackets and tensioners with bearings

Tension support with 50mm shaft bearing UCT210 - ISB

UCT210-ISB
€23.69 (€19.58 tax excl.)
Cast iron tensioner support with UC210 inserted bearing for 50mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCT210  Representative...
Brackets and tensioners with bearings

Tension support with 60mm axle bearing UCT212 - ISB

UCT212-ISB
€42.57 (€35.18 tax excl.)
Cast iron tensioner support with UC212 inserted bearing for 60mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCT212  Representative...
Brackets and tensioners with bearings

Tension support with 75mm axle bearing UCT215 - ISB

UCT215-ISB
€76.42 (€63.16 tax excl.)
Cast iron tensioner support with UC215 inserted bearing for 75mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCT215  Representative...
Brackets and tensioners with bearings

Tension support with 80mm axle bearing UCT216 - ISB

UCT216-ISB
€117.55 (€97.15 tax excl.)
Cast iron tensioner support with UC216 inserted bearing for 80mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCT216  Representative...
Brackets and tensioners with bearings

Tension support with 90mm axle bearing UCT218 - ISB

UCT218-ISB
€133.63 (€110.44 tax excl.)
Cast iron tensioner support with UC218 inserted bearing for 90mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCT218  Representative...
Thermoplastic foot support... Thermoplastic foot support... 2
Foot supports with stainless steel bearings in thermoplastic

Thermoplastic foot support with INOX bearing 20mm shaft SSUC-204 - ISB

UCPP+SSUC204
€30.89 (€25.53 tax excl.)
Foot or bridge type support, in black or white thermoplastic, with SSUC-204 stainless steel insert bearing, for 20mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment...
Thermoplastic foot support... Thermoplastic foot support... 2
Foot supports with stainless steel bearings in thermoplastic

Thermoplastic foot support with INOX bearing 25mm shaft SSUC-205 - ISB

UCPP+SSUC205
€36.87 (€30.47 tax excl.)
Foot or bridge type support, in black or white thermoplastic, with SSUC-205 stainless steel insert bearing, for 25mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment...
Thermoplastic foot support... Thermoplastic foot support... 2
Foot supports with stainless steel bearings in thermoplastic

Thermoplastic foot support with INOX bearing 30mm shaft SSUC-206 - ISB

UCPP+SSUC206
€48.13 (€39.78 tax excl.)
Foot or bridge type support, in black or white thermoplastic, with SSUC-206 stainless steel insert bearing, for 30mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment...
Thermoplastic foot support... Thermoplastic foot support... 2
Foot supports with stainless steel bearings in thermoplastic

Thermoplastic foot support with INOX bearing 35mm shaft SSUC-207 - ISB

UCPP+SSUC207
€62.41 (€51.58 tax excl.)
Foot or bridge type support, in black or white thermoplastic, with SSUC-207 stainless steel insert bearing, for 35mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment...
Thermoplastic foot support... Thermoplastic foot support... 2
Foot supports with stainless steel bearings in thermoplastic

Thermoplastic foot support with INOX bearing 40mm shaft SSUC-208 - ISB

UCPP+SSUC208
€74.64 (€61.69 tax excl.)
Foot or bridge type support, in black or white thermoplastic, with SSUC-208 stainless steel insert bearing, for 40mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment...
Oval thermoplastic support... Oval thermoplastic support... 2
Oval supports with stainless steel bearings in thermoplastic

Oval thermoplastic support with INOX bearing 20mm shaft SSUC-204 - ISB

UCFLP+SSUC204
€29.85 (€24.67 tax excl.)
Oval support, in black or white thermoplastic, with SSUC-204 stainless steel insert bearing, for 20mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects. Black...
Oval thermoplastic support... Oval thermoplastic support... 2
Oval supports with stainless steel bearings in thermoplastic

Oval thermoplastic support with INOX bearing 25mm shaft SSUC-205 - ISB

UCFLP+SSUC205
€35.39 (€29.25 tax excl.)
Oval support, in black or white thermoplastic, with SSUC-205 stainless steel insert bearing, for 25mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects....
Oval thermoplastic support... Oval thermoplastic support... 2
Oval supports with stainless steel bearings in thermoplastic

Oval thermoplastic support with INOX bearing 30mm shaft SSUC-206 - ISB

UCFLP+SSUC206
€47.03 (€38.87 tax excl.)
Oval support, in black or white thermoplastic, with SSUC-206 stainless steel insert bearing, for 30mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects. Black...
Oval thermoplastic support... Oval thermoplastic support... 2
Oval supports with stainless steel bearings in thermoplastic

Oval thermoplastic support with INOX bearing 35mm shaft SSUC-207 - ISB

UCFLP+SSUC207
€59.23 (€48.95 tax excl.)
Oval support, in black or white thermoplastic, with SSUC-207 stainless steel insert bearing, for 35mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects. Black...
Oval thermoplastic support... Oval thermoplastic support... 2
Oval supports with stainless steel bearings in thermoplastic

Oval thermoplastic support with INOX bearing 40mm shaft SSUC-208 - ISB

UCFLP+SSUC208
€72.49 (€59.91 tax excl.)
Oval support, in black or white thermoplastic, with SSUC-208 stainless steel insert bearing, for 40mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects....
Square thermoplastic... Square thermoplastic... 2
Square supports with stainless steel bearings in thermoplastic

Square thermoplastic support with INOX bearing 20mm shaft SSUC-204 - ISB

UCFP+SSUC204
€31.54 (€26.07 tax excl.)
Square support, in black or white thermoplastic, with SSUC-204 stainless steel insert bearing, for 20mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects....
Square thermoplastic... Square thermoplastic... 2
Square supports with stainless steel bearings in thermoplastic

Square thermoplastic support with INOX bearing 25mm shaft SSUC-205 - ISB

UCFP+SSUC205
€36.12 (€29.85 tax excl.)
Square support, in black or white thermoplastic, with SSUC-205 stainless steel insert bearing, for 25mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects....
Square thermoplastic... Square thermoplastic... 2
Square supports with stainless steel bearings in thermoplastic

Square thermoplastic support with INOX bearing 30mm shaft SSUC-206 - ISB

UCFP+SSUC206
€48.05 (€39.71 tax excl.)
Square support, in black or white thermoplastic, with SSUC-206 stainless steel insert bearing, for 30mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects....
Square thermoplastic... Square thermoplastic... 2
Square supports with stainless steel bearings in thermoplastic

Square thermoplastic support with INOX bearing 35mm shaft SSUC-207 - ISB

UCFP+SSUC207
€63.16 (€52.20 tax excl.)
Square support, in black or white thermoplastic, with SSUC-207 stainless steel insert bearing, for 35mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects....
Square thermoplastic... Square thermoplastic... 2
Square supports with stainless steel bearings in thermoplastic

Square thermoplastic support with INOX bearing 40mm shaft SSUC-208 - ISB

UCFP+SSUC208
€75.70 (€62.56 tax excl.)
Square support, in black or white thermoplastic, with SSUC-208 stainless steel insert bearing, for 40mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects....
Round support in white...
Round supports with stainless steel bearings in thermoplastic

Round support in white thermoplastic with INOX bearing 20mm shaft SSUC-204 - ISB

UCFCPBSSUC204
€34.41 (€28.44 tax excl.)
Round support, in white thermoplastic, with SSUC-204 stainless steel insert bearing, for 20mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects. Reference:...
Round support in white...
Round supports with stainless steel bearings in thermoplastic

Round support in white thermoplastic with INOX bearing 25mm shaft SSUC-205 - ISB

UCFCPBSSUC205
€39.42 (€32.58 tax excl.)
Round support, in white thermoplastic, with SSUC-205 stainless steel insert bearing, for 25mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects. Reference:...
Round support in white...
Round supports with stainless steel bearings in thermoplastic

Round support in white thermoplastic with INOX bearing 30mm shaft SSUC-206 - ISB

UCFCPBSSUC206
€53.92 (€44.56 tax excl.)
Round support, in white thermoplastic, with SSUC-206 stainless steel insert bearing, for 30mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects. Reference:...
Round support in white...
Round supports with stainless steel bearings in thermoplastic

Round support in white thermoplastic with INOX bearing 35mm shaft SSUC-207 - ISB

UCFCPBSSUC207
€66.13 (€54.65 tax excl.)
Round support, in white thermoplastic, with SSUC-207 stainless steel insert bearing, for 35mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects. Reference:...
Round support in white...
Round supports with stainless steel bearings in thermoplastic

Round support in white thermoplastic with INOX bearing 40mm shaft SSUC-208 - ISB

UCFCPBSSUC208
€79.46 (€65.67 tax excl.)
Round support, in white thermoplastic, with SSUC-208 stainless steel insert bearing, for 40mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects. Reference:...
Thermoplastic tensioner... Thermoplastic tensioner... 2
Tension supports with stainless steel bearings in thermoplastic

Thermoplastic tensioner support with INOX bearing 20mm shaft SSUC-204 - ISB

UCTP+SSUC204
€33.58 (€27.75 tax excl.)
Tension support, in black or white thermoplastic, with SSUC-204 stainless steel insert bearing, for 20mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects....
Thermoplastic tensioner... Thermoplastic tensioner... 2
Tension supports with stainless steel bearings in thermoplastic

Thermoplastic tensioner support with INOX bearing 25mm shaft SSUC-205 - ISB

UCTP+SSUC205
€38.66 (€31.95 tax excl.)
Tension support, in black or white thermoplastic, with SSUC-205 stainless steel insert bearing, for 25mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects....
Thermoplastic tensioner... Thermoplastic tensioner... 2
Tension supports with stainless steel bearings in thermoplastic

Thermoplastic tensioner support with INOX bearing 30mm shaft SSUC-206 - ISB

UCTP+SSUC206
€50.58 (€41.80 tax excl.)
Tension support, in black or white thermoplastic, with SSUC-206 stainless steel insert bearing, for 30mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects....
Thermoplastic tensioner... Thermoplastic tensioner... 2
Tension supports with stainless steel bearings in thermoplastic

Thermoplastic tensioner support with INOX bearing 35mm shaft SSUC-207 - ISB

UCTP+SSUC207
€64.99 (€53.71 tax excl.)
Tension support, in black or white thermoplastic, with SSUC-207 stainless steel insert bearing, for 35mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects....
Thermoplastic tensioner... Thermoplastic tensioner... 2
Tension supports with stainless steel bearings in thermoplastic

Thermoplastic tensioner support with INOX bearing 40mm shaft SSUC-208 - ISB

UCTP+SSUC208
€77.88 (€64.36 tax excl.)
Tension support, in black or white thermoplastic, with SSUC-208 stainless steel insert bearing, for 40mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects....
Thermoplastic flange... Thermoplastic flange... 2
Flange supports with stainless steel bearings in thermoplastic

Thermoplastic flange support with INOX bearing 30mm shaft SSUC-206 - ISB

UCFBP+SSUC206
€48.27 (€39.89 tax excl.)
flange support, in black or white thermoplastic, with SSUC-206 stainless steel insert bearing, for 30mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects....
Thermoplastic flange... Thermoplastic flange... 2
Flange supports with stainless steel bearings in thermoplastic

Thermoplastic flange support with INOX bearing 20mm shaft SSUC-204 - ISB

UCFBP+SSUC204
€31.11 (€25.71 tax excl.)
flange support, in black or white thermoplastic, with SSUC-204 stainless steel insert bearing, for 20mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects....
Thermoplastic flange... Thermoplastic flange... 2
Flange supports with stainless steel bearings in thermoplastic

Thermoplastic flange support with INOX bearing 25mm shaft SSUC-205 - ISB

UCFBP+SSUC205
€36.38 (€30.07 tax excl.)
flange support, in black or white thermoplastic, with SSUC-205 stainless steel insert bearing, for 25mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects....
White thermoplastic flange...
Flange supports with stainless steel bearings in thermoplastic

White thermoplastic flange support with INOX bearing 35mm shaft SSUC-207 - ISB

UCFBPBSSUC207
€53.08 (€43.87 tax excl.)
flange support, in white thermoplastic, with SSUC-207 stainless steel insert bearing, for 35mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects. Reference:...
White thermoplastic flange...
Flange supports with stainless steel bearings in thermoplastic

White thermoplastic flange support with INOX bearing 40mm shaft SSUC-208 - ISB

UCFBPBSSUC208
€58.50 (€48.35 tax excl.)
flange support, in white thermoplastic, with SSUC-208 stainless steel insert bearing, for 40mm diameter shaft. Self-aligning support support with inserted ball bearing and with prisoners in the inner ring, sheet metal seal, equipped with a nitrile rubber lip. Bearing with fixing pins for self-alignment and to compensate for alignment defects. Reference:...
Foot supports with stainless steel bearings

Support with 12mm INOX UCP201 axle bearing - ISB

SSUCP201-ISB
€45.21 (€37.36 tax excl.)
Foot support with inserted bearing UCP201, both elements in stainless steel, for 12mm diameter shaft. Self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference:...
Square supports with stainless steel bearings

Square support with 12mm INOX UCF201 axle bearing - ISB

SSUCF201-ISB
€45.21 (€37.36 tax excl.)
Square support with inserted bearing UCF201, both elements in stainless steel, for 12mm diameter shaft. Self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference:...
Square supports with stainless steel bearings

Square support with bearing 15mm shaft INOX UCF202 - ISB

SSUCF202-ISB
€46.55 (€38.47 tax excl.)
Square support with bearing inserted UCF202, both elements in stainless steel, for shaft diameter 15mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCF202...
Square supports with stainless steel bearings

Square support with bearing shaft 17mm INOX UCF203 - ISB

SSUCF203-ISB
€47.70 (€39.42 tax excl.)
Square support with bearing inserted UCF203, both elements in stainless steel, for shaft diameter 17mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCF203...
Square supports with stainless steel bearings

Square support with bearing axis 20mm INOX UCF204 - ISB

SSUCF204-ISB
€40.04 (€33.09 tax excl.)
Square support with bearing inserted UCF204, both elements in stainless steel, for shaft diameter 20mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-aligning and to compensate for misalignment. Part number: SSUCF204...
Square supports with stainless steel bearings

Square support with bearing shaft 25mm INOX UCF205 - ISB

SSUCF205-ISB
€44.82 (€37.04 tax excl.)
Square support with bearing inserted UCF205, both elements in stainless steel, for shaft diameter 25mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCF205...
Square supports with stainless steel bearings

Square support with bearing shaft 30mm INOX UCF206 - ISB

SSUCF206-ISB
€72.22 (€59.69 tax excl.)
Square support with bearing inserted UCF206, both elements in stainless steel, for shaft diameter 30mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCF206...
Square supports with stainless steel bearings

Square support with bearing shaft 35mm INOX UCF207 - ISB

SSUCF207-ISB
€90.91 (€75.13 tax excl.)
Square support with bearing inserted UCF207, both elements in stainless steel, for shaft diameter 35mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCF207...
Square supports with stainless steel bearings

Square support with bearing shaft 40mm INOX UCF208 - ISB

SSUCF208-ISB
€106.70 (€88.18 tax excl.)
Square support with bearing inserted UCF208, both elements in stainless steel, for shaft diameter 40mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCF208...
Square supports with stainless steel bearings

Square bracket with bearing shaft 45mm INOX UCF209 - ISB

SSUCF209-ISB
€113.44 (€93.75 tax excl.)
Square support with bearing inserted UCF209, both elements in stainless steel, for shaft diameter 45mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCF209...
Square supports with stainless steel bearings

Square support with bearing axis 50mm INOX UCF210 - ISB

SSUCF210-ISB
€145.73 (€120.44 tax excl.)
Square support with bearing inserted UCF210, both elements in stainless steel, for shaft diameter 50mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCF210...
Square supports with stainless steel bearings

Square support with bearing shaft 55mm INOX UCF211 - ISB

SSUCF211-ISB
€258.26 (€213.44 tax excl.)
Square support with bearing inserted UCF211, both elements in stainless steel, for shaft diameter 55mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCF211...
Square supports with stainless steel bearings

Square support with bearing shaft 60mm INOX UCF212 - ISB

SSUCF212-ISB
€303.07 (€250.47 tax excl.)
Square support with bearing inserted UCF212, both elements in stainless steel, for shaft diameter 60mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCF212...
Square supports with stainless steel bearings

Square support with bearing shaft 70mm INOX UCF214 - ISB

SSUCF214-ISB
€632.39 (€522.64 tax excl.)
Square support with bearing inserted UCF214, both elements in stainless steel, for shaft diameter 70mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCF214...
Square supports with stainless steel bearings

Square support with bearing shaft 80mm INOX UCF216 - ISB

SSUCF216-ISB
€979.11 (€809.18 tax excl.)
Square support with bearing inserted UCF216, both elements in stainless steel, for shaft diameter 80mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCF216...
View
Round supports with INOX bearings

Round support with 17mm INOX UCFC203 axle bearing - ISB

SSUCFC203-ISB
€57.40 (€47.44 tax excl.)
Round support with inserted bearing UCFC203, both elements in stainless steel, for 17mm diameter shaft. Self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference:...
Round supports with INOX bearings

Round support with bearing 35mm INOX 35mm shaft UCFC207 - ISB

SSUCFC207-ISB
€93.17 (€77.00 tax excl.)
Round support with bearing inserted UCFC207, both elements in stainless steel, for shaft diameter 35mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCFC207...
Oval supports with stainless steel bearings

Oval support with 12mm INOX UCFL201 axle bearing - ISB

SSUCFL201-ISB
€45.21 (€37.36 tax excl.)
Oval support with inserted bearing UCFL201, both elements in stainless steel, for 12mm diameter shaft. Self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference:...
Oval supports with stainless steel bearings

Oval support with bearing shaft 15mm INOX UCFL202 - ISB

SSUCFL202-ISB
€46.55 (€38.47 tax excl.)
Oval support with bearing inserted UCFL202, both elements in stainless steel, for shaft diameter 15mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCFL202...
Oval supports with stainless steel bearings

Oval support with bearing shaft 17mm INOX UCFL203 - ISB

SSUCFL203-ISB
€47.70 (€39.42 tax excl.)
Oval support with bearing inserted UCFL203, both elements in stainless steel, for shaft diameter 17mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCFL203...
Oval supports with stainless steel bearings

Oval support with bearing shaft 20mm INOX UCFL204 - ISB

SSUCFL204-ISB
€40.04 (€33.09 tax excl.)
Oval support with bearing inserted UCFL204, both elements in stainless steel, for shaft diameter 20mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCFL204...
Oval supports with stainless steel bearings

Oval support with bearing shaft 25mm INOX UCFL205 - ISB

SSUCFL205-ISB
€44.82 (€37.04 tax excl.)
Oval support with bearing inserted UCFL205, both elements in stainless steel, for shaft diameter 25mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCFL205...
Oval supports with stainless steel bearings

Oval support with bearing shaft 30mm INOX UCFL206 - ISB

SSUCFL206-ISB
€72.22 (€59.69 tax excl.)
Oval support with bearing inserted UCFL206, both elements in stainless steel, for shaft diameter 30mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCFL206...
Oval supports with stainless steel bearings

Oval support with bearing shaft 35mm INOX UCFL207 - ISB

SSUCFL207-ISB
€90.91 (€75.13 tax excl.)
Oval support with bearing inserted UCFL207, both elements in stainless steel, for shaft diameter 35mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCFL207...
Oval supports with stainless steel bearings

Oval support with bearing shaft 40mm INOX UCFL208 - ISB

SSUCFL208-ISB
€106.70 (€88.18 tax excl.)
Oval support with bearing inserted UCFL208, both elements in stainless steel, for shaft diameter 40mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCFL208...
Oval supports with stainless steel bearings

Oval support with bearing shaft 45mm INOX UCFL209 - ISB

SSUCFL209-ISB
€113.44 (€93.75 tax excl.)
Oval support with bearing inserted UCFL209, both elements in stainless steel, for shaft diameter 45mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCFL209...
Oval supports with stainless steel bearings

Oval support with bearing shaft 50mm INOX UCFL210 - ISB

SSUCFL210-ISB
€145.73 (€120.44 tax excl.)
Oval support with bearing inserted UCFL210, both elements in stainless steel, for shaft diameter 50mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCFL210...
Oval supports with stainless steel bearings

Oval support with bearing shaft 55mm INOX UCFL211 - ISB

SSUCFL211-ISB
€258.26 (€213.44 tax excl.)
Oval support with bearing inserted UCFL211, both elements in stainless steel, for shaft diameter 55mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCFL211...
Oval supports with stainless steel bearings

Oval support with bearing shaft 60mm INOX UCFL212 - ISB

SSUCFL212-ISB
€303.07 (€250.47 tax excl.)
Oval support with bearing inserted UCFL212, both elements in stainless steel, for shaft diameter 60mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCFL212...
Tension supports with INOX bearings

Tensioner bracket with bearing shaft 17mm INOX UCT203 - ISB

SSUCT203-ISB
€59.59 (€49.25 tax excl.)
Tensioning support with bearing inserted UCT203, both elements in stainless steel, for shaft diameter 17mm. Self-aligning support bracket with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCT203...
Tension supports with INOX bearings

Tensioner bracket with bearing shaft 20mm INOX UCT204 - ISB

SSUCT204-ISB
€55.71 (€46.04 tax excl.)
Tensioning support with bearing inserted UCT204, both elements in stainless steel, for shaft diameter 20mm. Self-aligning support bracket with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCT204...
Tension supports with INOX bearings

Tensioner bracket with bearing shaft 25mm INOX UCT205 - ISB

SSUCT205-ISB
€60.21 (€49.76 tax excl.)
Tensioning support with bearing inserted UCT205, both elements in stainless steel, for shaft diameter 25mm. Self-aligning support bracket with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCT205...
Tension supports with INOX bearings

Tensioner bracket with bearing shaft 30mm INOX UCT206 - ISB

SSUCT206-ISB
€84.00 (€69.42 tax excl.)
Tensioning support with bearing inserted UCT206, both elements in stainless steel, for shaft diameter 30mm. Self-aligning support bracket with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCT206...
Tension supports with INOX bearings

Tensioner bracket with bearing 35mm shaft INOX UCT207 - ISB

SSUCT207-ISB
€117.90 (€97.44 tax excl.)
Tensioning support with bearing inserted UCT207, both elements in stainless steel, for shaft diameter 35mm. Self-aligning support bracket with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCT207...
Tension supports with INOX bearings

Tensioner bracket with bearing shaft 40mm INOX UCT208 - ISB

SSUCT208-ISB
€134.95 (€111.53 tax excl.)
Tensioning support with bearing inserted UCT208, both elements in stainless steel, for shaft diameter 40mm. Self-aligning support bracket with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCT208...
Tension supports with INOX bearings

Tensioner bracket with bearing shaft 45mm INOX UCT209 - ISB

SSUCT209-ISB
€145.99 (€120.65 tax excl.)
Tensioning support with bearing inserted UCT209, both elements in stainless steel, for shaft diameter 45mm. Self-aligning support bracket with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCT209...
Tension supports with INOX bearings

Tensioner bracket with bearing shaft 50mm INOX UCT210 - ISB

SSUCT210-ISB
€155.58 (€128.58 tax excl.)
Tensioning support with bearing inserted UCT210, both elements in stainless steel, for shaft diameter 50mm. Self-aligning support bracket with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCT210...
Tension supports with INOX bearings

Tensioner bracket with bearing shaft 55mm INOX UCT211 - ISB

SSUCT211-ISB
€218.71 (€180.75 tax excl.)
Tensioning support with bearing inserted UCT211, both elements in stainless steel, for shaft diameter 55mm. Self-aligning support bracket with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCT211...
Tension supports with INOX bearings

Tensioner bracket with bearing shaft 60mm INOX UCT212 - ISB

SSUCT212-ISB
€274.91 (€227.20 tax excl.)
Tensioning support with bearing inserted UCT212, both elements in stainless steel, for shaft diameter 60mm. Self-aligning support bracket with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCT212...
Reduced bridge supports with stainless steel bearings

Reduced bridge support with bearing shaft 12mm INOX UCPA201 - ISB

SSUCPA201-ISB
€57.51 (€47.53 tax excl.)
Reduced bridge type support with bearing inserted UCPA201, both elements in stainless steel, for 12mm diameter shaft. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number:...
View
Reduced bridge supports with stainless steel bearings

Reduced bridge support with bearing shaft 15mm INOX UCPA202 - ISB

SSUCPA202-ISB
€57.51 (€47.53 tax excl.)
Reduced bridge type support with bearing inserted UCPA202, both elements in stainless steel, for shaft diameter 15mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number:...
Reduced bridge supports with stainless steel bearings

Reduced bridge support with bearing shaft 17mm INOX UCPA203 - ISB

SSUCPA203-ISB
€57.51 (€47.53 tax excl.)
Reduced bridge type support with bearing inserted UCPA203, both elements in stainless steel, for shaft diameter 17mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number:...
Reduced bridge supports with stainless steel bearings

Reduced bridge support with bearing axis 20mm INOX UCPA204 - ISB

SSUCPA204-ISB
€43.40 (€35.87 tax excl.)
Reduced bridge type support with bearing inserted UCPA204, both elements in stainless steel, for shaft diameter 20mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number:...
Reduced bridge supports with stainless steel bearings

Reduced bridge support with bearing axis 25mm INOX UCPA205 - ISB

SSUCPA205-ISB
€48.88 (€40.40 tax excl.)
Reduced bridge type support with bearing inserted UCPA205, both elements in stainless steel, for shaft diameter 25mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number:...
Reduced bridge supports with stainless steel bearings

Reduced bridge support with bearing shaft 30mm INOX UCPA206 - ISB

SSUCPA206-ISB
€65.91 (€54.47 tax excl.)
Reduced bridge type support with bearing inserted UCPA206, both elements in stainless steel, for shaft diameter 30mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number:...
Reduced bridge supports with stainless steel bearings

Reduced bridge support with bearing shaft 35mm INOX UCPA207 - ISB

SSUCPA207-ISB
€97.48 (€80.56 tax excl.)
Reduced bridge type support with bearing inserted UCPA207, both elements in stainless steel, for shaft diameter 35mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number:...
Reduced bridge supports with stainless steel bearings

Reduced bridge support with bearing shaft 40mm INOX UCPA208 - ISB

SSUCPA208-ISB
€110.19 (€91.07 tax excl.)
Reduced bridge type support with bearing inserted UCPA208, both elements in stainless steel, for shaft diameter 40mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number:...
Reduced bridge supports with stainless steel bearings

Reduced bridge support with bearing shaft 45mm INOX UCPA209 - ISB

SSUCPA209-ISB
€126.37 (€104.44 tax excl.)
Reduced bridge type support with bearing inserted UCPA209, both elements in stainless steel, for 45mm diameter shaft. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number:...
Reduced bridge supports with stainless steel bearings

Reduced bridge support with bearing axis 50mm INOX UCPA210 - ISB

SSUCPA210-ISB
€163.73 (€135.31 tax excl.)
Reduced bridge type support with bearing inserted UCPA210, both elements in stainless steel, for shaft diameter 50mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number:...
Reduced bridge supports with stainless steel bearings

Reduced bridge support with bearing shaft 55mm INOX UCPA211 - ISB

SSUCPA211-ISB
€289.24 (€239.04 tax excl.)
Reduced bridge type support with bearing inserted UCPA211, both elements in stainless steel, for shaft diameter 55mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number:...
Reduced bridge supports with stainless steel bearings

Reduced bridge support with bearing shaft 60mm INOX UCPA212 - ISB

SSUCPA212-ISB
€339.47 (€280.55 tax excl.)
Reduced bridge type support with bearing inserted UCPA212, both elements in stainless steel, for shaft diameter 60mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-aligning and to compensate for misalignment. Part number:...
Flange supports with INOX bearings

Support of flange with bearing 15mm shaft INOX UCFB202 - ISB

SSUCFB202-ISB
€50.69 (€41.89 tax excl.)
Lateral flange support with bearing inserted UCFB202, both elements in stainless steel, for shaft diameter 15mm. Self-aligning support bracket with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number:...
View
Reduced bridge supports with cast bearings

Reduced bridge support 12mm axis UCPA201- ISB

UCPA201-ISB
€10.35 (€8.55 tax excl.)
Reduced bridge cast support with UCPA201 inserted bearing for 12mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCPA201  Representative...
Flange supports with INOX bearings

Support of flange with bearing shaft 17mm INOX UCFB203 - ISB

SSUCFB203-ISB
€50.69 (€41.89 tax excl.)
Lateral flange support with bearing inserted UCFB203, both elements in stainless steel, for shaft diameter 17mm. Self-aligning support bracket with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number:...
Reduced bridge supports with cast bearings

Reduced bridge support 15mm axis UCPA202- ISB

UCPA202-ISB
€10.35 (€8.55 tax excl.)
Reduced bridge cast support with UCPA202 inserted bearing for 15mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCPA202  Representative...
Flange supports with INOX bearings

Support for flange with bearing shaft 25mm INOX UCFB205 - ISB

SSUCFB205-ISB
€47.38 (€39.16 tax excl.)
Lateral flange support with bearing inserted UCFB205, both elements in stainless steel, for shaft diameter 25mm. Self-aligning support bracket with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number:...
Reduced bridge supports with cast bearings

Reduced bridge support 17mm axis UCPA203- ISB

UCPA203-ISB
€10.35 (€8.55 tax excl.)
Reduced bridge cast support with UCPA203 inserted bearing for 17mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCPA203  Representative...
Flange supports with INOX bearings

Support of flange with bearing shaft 30mm INOX UCFB206 - ISB

SSUCFB206-ISB
€55.96 (€46.25 tax excl.)
Lateral flange support with bearing inserted UCFB206, both elements in stainless steel, for shaft diameter 30mm. Self-aligning support bracket with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number:...
Reduced bridge supports with cast bearings

Reduced bridge support 20mm axis UCPA204- ISB

UCPA204-ISB
€10.35 (€8.55 tax excl.)
Reduced bridge cast support with UCPA204 inserted bearing for 20mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCPA204  Representative...
Flange supports with INOX bearings

Support of flange with bearing shaft 35mm INOX UCFB207 - ISB

SSUCFB207-ISB
€65.50 (€54.13 tax excl.)
Lateral flange support with bearing inserted UCFB207, both elements in stainless steel, for 35mm diameter shaft. Self-aligning support bracket with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number:...
Reduced bridge supports with cast bearings

Reduced bridge support 25mm shaft UCPA205- ISB

UCPA205-ISB
€10.38 (€8.58 tax excl.)
Reduced bridge cast support with UCPA205 inserted bearing for 25mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCPA205  Representative...
Flange supports with INOX bearings

Support of flange with bearing shaft 40mm INOX UCFB208 - ISB

SSUCFB208-ISB
€76.65 (€63.35 tax excl.)
Lateral flange support with bearing inserted UCFB208, both elements in stainless steel, for shaft diameter 40mm. Self-aligning support bracket with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number:...
Reduced bridge supports with cast bearings

Reduced bridge support 30mm axis UCPA206- ISB

UCPA206-ISB
€12.98 (€10.73 tax excl.)
Reduced bridge cast support with UCPA206 inserted bearing for 30mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCPA206  Representative...
Reduced bridge supports with cast bearings

Reduced bridge support 35mm axis UCPA207- ISB

UCPA207-ISB
€15.03 (€12.42 tax excl.)
Reduced bridge cast support with UCPA207 inserted bearing for 35mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCPA207  Representative...
Reduced bridge supports with cast bearings

Reduced bridge support 40mm axis UCPA208- ISB

UCPA208-ISB
€19.69 (€16.27 tax excl.)
Reduced bridge cast support with UCPA208 inserted bearing for 40mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCPA208  Representative...
Reduced bridge supports with cast bearings

Reduced bridge support 45mm axis UCPA209- ISB

UCPA209-ISB
€19.41 (€16.04 tax excl.)
Reduced bridge cast support with UCPA209 inserted bearing for 45mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCPA209  Representative...
Reduced bridge supports with cast bearings

Reduced bridge support 50mm axis UCPA210- ISB

UCPA210-ISB
€25.63 (€21.18 tax excl.)
Reduced bridge cast support with UCPA210 inserted bearing for 50mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCPA210  Representative...
Reduced bridge supports with cast bearings

Reduced bridge support 55mm axis UCPA211- ISB

UCPA211-ISB
€31.06 (€25.67 tax excl.)
Reduced bridge cast support with UCPA211 inserted bearing for 55mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCPA211  Representative...
Reduced bridge supports with cast bearings

Reduced bridge support 60mm axis UCPA212- ISB

UCPA212-ISB
€38.74 (€32.02 tax excl.)
Reduced bridge cast support with UCPA212 inserted bearing for 60mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCPA212  Representative...
Brackets and tensioners with bearings

Square bracket with shaft bearing 35mm UCF207 - ISB

UCF207-ISB
€12.52 (€10.35 tax excl.)
Square casting bracket with UCF207 inserted bearing for 35mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF207 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 40mm UCF208 - ISB

UCF208-ISB
€15.25 (€12.60 tax excl.)
Square casting bracket with UCF208 inserted bearing for 40mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF208 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 45mm UCF209 - ISB

UCF209-ISB
€17.82 (€14.73 tax excl.)
Square casting bracket with UCF209 inserted bearing for 45mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF2091 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 50mm UCF210 - ISB

UCF210-ISB
€21.11 (€17.45 tax excl.)
Square casting bracket with UCF210 inserted bearing for 50mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF210 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 55mm UCF211 - ISB

UCF211-ISB
€25.63 (€21.18 tax excl.)
Square casting bracket with UCF211 inserted bearing for 55mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF211 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 60mm UCF212 - ISB

UCF212-ISB
€40.70 (€33.64 tax excl.)
Square casting bracket with UCF212 inserted bearing for 60mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF212 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 65mm UCF213 - ISB

UCF213-ISB
€45.68 (€37.75 tax excl.)
Square casting bracket with UCF213 inserted bearing for 65mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF213 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 70mm UCF214 - ISB

UCF214-ISB
€54.98 (€45.44 tax excl.)
Square casting bracket with UCF214 inserted bearing for 70mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF214 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 75mm UCF215 - ISB

UCF215-ISB
€63.84 (€52.76 tax excl.)
Square casting bracket with UCF215 inserted bearing for 75mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF215 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 80mm UCF216 - ISB

UCF216-ISB
€102.04 (€84.33 tax excl.)
Square casting bracket with UCF216 inserted bearing for 80mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF216 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 85mm UCF217 - ISB

UCF217-ISB
€108.74 (€89.87 tax excl.)
Square casting bracket with UCF217 inserted bearing for 85mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF217 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 90mm UCF218 - ISB

UCF218-ISB
€167.65 (€138.55 tax excl.)
Square casting bracket with UCF218 inserted bearing for 90mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF218 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 25mm UCF305 - ISB

UCF305-ISB
€19.31 (€15.96 tax excl.)
Square casting bracket with UCF305 inserted bearing for 25mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF305 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 30mm UCF306 - ISB

UCF306-ISB
€24.49 (€20.24 tax excl.)
Square casting bracket with UCF306 inserted bearing for 30mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF306 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 35mm UCF307 - ISB

UCF307-ISB
€30.31 (€25.05 tax excl.)
Square casting bracket with UCF307 inserted bearing for 35mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF307 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 40mm UCF308 - ISB

UCF308-ISB
€36.30 (€30.00 tax excl.)
Square casting bracket with UCF308 inserted bearing for 40mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF308 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 45mm UCF309 - ISB

UCF309-ISB
€55.71 (€46.04 tax excl.)
Square casting bracket with UCF309 inserted bearing for 45mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF309 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 50mm UCF310 - ISB

UCF310-ISB
€59.88 (€49.49 tax excl.)
Square casting bracket with UCF310 inserted bearing for 50mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF310 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 55mm UCF311 - ISB

UCF311-ISB
€86.35 (€71.36 tax excl.)
Square casting bracket with UCF311 inserted bearing for 55mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF311 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 60mm UCF312 - ISB

UCF312-ISB
€105.94 (€87.55 tax excl.)
Square casting bracket with UCF312 inserted bearing for 60mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF312 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 65mm UCF313 - ISB

UCF313-ISB
€124.55 (€102.93 tax excl.)
Square casting bracket with UCF313 inserted bearing for 65mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF313 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 70mm UCF314 - ISB

UCF314-ISB
€145.64 (€120.36 tax excl.)
Square casting bracket with UCF314 inserted bearing for 70mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF314 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 75mm UCF315 - ISB

UCF315-ISB
€173.97 (€143.78 tax excl.)
Square casting bracket with UCF315 inserted bearing for 75mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF315 Representative image...
Brackets and tensioners with bearings

Square bracket with shaft bearing 80mm UCF316 - ISB

UCF316-ISB
€235.95 (€195.00 tax excl.)
Square casting bracket with UCF316 inserted bearing for 80mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF316 Representative image...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 15mm UCFL202 - ISB

UCFL202-ISB
€7.77 (€6.42 tax excl.)
Oval cast iron bracket with UCFL202 inserted bearing for 15mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCFL202 Representative image...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 17mm UCFL203 - ISB

UCFL203-ISB
€7.88 (€6.51 tax excl.)
Oval cast iron bracket with UCFL203 inserted bearing for 17mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCFL203 Representative image...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 30mm UCFL206 - ISB

UCFL206-ISB
€10.16 (€8.40 tax excl.)
Cast oval housing with UCFL206 inserted bearing for 30mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCFL206 Representative image for...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 35mm UCFL207 - ISB

UCFL207-ISB
€12.16 (€10.05 tax excl.)
Cast oval housing with UCFL207 inserted bearing for 35mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCFL207 Representative image for...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 40mm UCFL208 - ISB

UCFL208-ISB
€15.25 (€12.60 tax excl.)
Oval cast iron bracket with UCFL208 inserted bearing for 40mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCFL208 Representative image...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 45mm UCFL209 - ISB

UCFL209-ISB
€17.82 (€14.73 tax excl.)
Oval cast iron bracket with UCFL209 inserted bearing for 45mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCFL209 Representative image...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 55mm UCFL211 - ISB

UCFL211-ISB
€29.20 (€24.13 tax excl.)
Cast oval housing with UCFL211 inserted bearing for 55mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCFL211 Representative image for...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 60mm UCFL212 - ISB

UCFL212-ISB
€34.47 (€28.49 tax excl.)
Cast oval housing with UCFL212 inserted bearing for 60mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCFL212 Representative image for...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 65mm UCFL213 - ISB

UCFL213-ISB
€45.68 (€37.75 tax excl.)
Oval cast iron bracket with UCFL213 inserted bearing for 65mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCFL213 Representative image...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 70mm UCFL214 - ISB

UCFL214-ISB
€54.98 (€45.44 tax excl.)
Cast oval housing with UCFL214 inserted bearing for 70mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCFL214 Representative image for...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 75mm UCFL215 - ISB

UCFL215-ISB
€72.03 (€59.53 tax excl.)
Cast oval housing with UCFL215 inserted bearing for 75mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCFL215 Representative image for...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 80mm UCFL216 - ISB

UCFL216-ISB
€102.04 (€84.33 tax excl.)
Oval cast iron bracket with UCFL216 inserted bearing for 80mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCFL216 Representative image...
Brackets and tensioners with bearings

Oval bracket with shaft bearing 90mm UCFL218 - ISB

UCFL218-ISB
€167.65 (€138.55 tax excl.)
Oval cast iron bracket with UCFL218 inserted bearing for 90mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCFL218 Representative image...
SF1 0304505C plain bearing type PAP 0305 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Friction cap SF1 0304505C type PAP 0305 P10 - ISB

SF10304505C
€0.18 (€0.15 tax excl.)
Self-lubricating plain bearing SF1 3x4.5x5mm PAP P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered.Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications.Reference: SF1...
SF1 0304506C plain bearing type PAP 0306 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Friction cap SF1 0304506C type PAP 0306 P10 - ISB

SF10304506C
€0.18 (€0.15 tax excl.)
Self-lubricating plain bearing SF1 3x4.5x6mm PAP P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered.Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications.Reference: SF1...
SF1 0405503C plain bearing type PAP 0403 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Friction cap SF1 0405503C type PAP 0403 P10 - ISB

SF10405503C
€0.16 (€0.13 tax excl.)
Self-lubricating plain bearing SF1 4x5.5x3mm PAP P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered.Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications.Reference: SF1...
SF1 0405504C plain bearing type PAP 0404 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Friction cap SF1 0405504C type PAP 0404 P10 - ISB

SF10405504C
€0.18 (€0.15 tax excl.)
Self-lubricating plain bearing SF1 4x5.5x4mm PAP P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered.Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications.Reference: SF1...
SF1 0405505C plain bearing type PAP 0405 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Friction cap SF1 0405505C type PAP 0405 P10 - ISB

SF10405505C
€0.18 (€0.15 tax excl.)
Self-lubricating plain bearing SF1 4x5.5x5mm PAP P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered.Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications.Reference: SF1...
SF1 0405506C plain bearing type PAP 0406 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Friction cap SF1 0405506C type PAP 0406 P10 - ISB

SF10405506C
€0.18 (€0.15 tax excl.)
Self-lubricating plain bearing SF1 4x5.5x6mm PAP P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered.Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications.Reference: SF1...
SF1 091110C plain bearing type PAP 0910 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Plain bearing SF1 091110C type PAP 0910 P10 - ISB

SF1091110C
€0.35 (€0.29 tax excl.)
Self-lubricating plain bearing SF1 9x11x10mm PAP P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered.Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications.Reference: SF1...
Cap from friction SF1 8085100C type PAP 80100 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Friction cap SF1 8085100C type PAP 80100 P10 - ISB

SF18085100C
€16.61 (€13.73 tax excl.)
Self-lubricating plain bearing SF1 80x85x100mm PAP P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered.Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications.Reference:...
Cap from friction SF1 8590100C type PAP 85100 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Friction cap SF1 8590100C type PAP 85100 P10 - ISB

SF18590100C
€18.73 (€15.48 tax excl.)
Self-lubricating plain bearing SF1 85x90x100mm PAP P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered.Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications.Reference:...
Cap from friction SF1 9095100C type PAP 90100 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Friction cap SF1 9095100C type PAP 90100 P10 - ISB

SF19095100C
€19.78 (€16.35 tax excl.)
Self-lubricating plain bearing SF1 90x95x100mm PAP P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered.Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications.Reference:...
Cap from friction SF1 9510060C type PAP 9560 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Friction cap SF1 9510060C type PAP 9560 P10 - ISB

SF19510060C
€16.34 (€13.50 tax excl.)
Self-lubricating plain bearing SF1 95x100x60mm PAP P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered.Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications.Reference:...
Cap from friction SF1 100105100C type PAP 100100 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

SF1 plain bearing 100105100C type PAP 100100 P10 - ISB

SF1100105100C
€22.43 (€18.54 tax excl.)
Self-lubricating plain bearing SF1 100x105x100mm PAP P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered.Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications.Reference:...
Cap from friction SF1 100105115C type PAP 100115 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

SF1 plain bearing 100105115C type PAP 100115 P10 - ISB

SF1100105115C
€22.69 (€18.75 tax excl.)
Self-lubricating plain bearing SF1 100x105x115mm PAP P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered.Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications.Reference:...
Cap from friction SF1 105110115C type PAP 105115 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

SF1 plain bearing 105110115C type PAP 105115 P10 - ISB

SF1105110115C
€23.50 (€19.42 tax excl.)
Self-lubricating plain bearing SF1 105x110x115mm PAP P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered.Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications.Reference:...
Cap from friction SF1 11011550C type PAP 11050 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Plain bearing SF1 11011550C type PAP 11050 P10 - ISB

SF111011550C
€18.15 (€15.00 tax excl.)
Self-lubricating plain bearing SF1 110x115x50mm PAP P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered.Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications.Reference:...
Cap from friction SF1 110115115C type PAP 110115 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

SF1 plain bearing 110115115C type PAP 110115 P10 - ISB

SF1110115115C
€24.71 (€20.42 tax excl.)
Self-lubricating plain bearing SF1 110x115x115mm PAP P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered.Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications.Reference:...
Cap from friction SF1 11512050C type PAP 11550 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Plain bearing SF1 11512050C type PAP 11550 P10 - ISB

SF111512050C
€46.36 (€38.31 tax excl.)
Self-lubricating plain bearing SF1 115x120x50mm PAP P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered.Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications.Reference:...
Cap from friction SF1 11512070C type PAP 11570 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Plain bearing SF1 11512070C type PAP 11570 P10 - ISB

SF111512070C
€50.52 (€41.75 tax excl.)
Self-lubricating plain bearing SF1 115x120x70mm PAP P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered.Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications.Reference:...
Cap from friction SF1 12012560C type PAP 12060 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Plain bearing SF1 12012560C type PAP 12060 P10 - ISB

SF112012560C
€53.47 (€44.19 tax excl.)
Self-lubricating plain bearing SF1 120x125x60mm PAP P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered.Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications.Reference:...
Cap from friction SF1 120125100C type PAP 120100 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Plain bearing SF1 120125100C type PAP 120100 P10 - ISB

SF1120125100C
€60.05 (€49.63 tax excl.)
Self-lubricating plain bearing SF1 120x125x100mm PAP P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered.Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications.Reference:...
Cap from friction SF1 140145100C type PAP 140100 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Plain bearing SF1 140145100C type PAP 140100 P10 - ISB

SF1140145100C
€68.69 (€56.77 tax excl.)
Self-lubricating plain bearing SF1 140x145x100mm PAP P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered.Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications.Reference:...
Cap from friction SF1 16016580C type PAP 16080 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Friction cap SF1 16016580C type PAP 16080 P10 - ISB

SF116016580C
€72.78 (€60.15 tax excl.)
Self-lubricating friction cap SF1 160x165x80mm PAP P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered.Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications.Reference:...
Cap from friction SF1 165170100C type PAP 165100 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

SF1 plain bearing 165170100C type PAP 165100 P10 - ISB

SF1165170100C
€69.95 (€57.81 tax excl.)
Self-lubricating plain bearing SF1 165x170x100mm PAP P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered.Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications.Reference:...
Cap from friction SF1 17017560C type PAP 17060 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Friction cap SF1 17017560C type PAP 17060 P10 - ISB

SF117017560C
€67.92 (€56.13 tax excl.)
Self-lubricating friction cap SF1 170x175x60mm PAP P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered.Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications.Reference:...
Cap from friction SF1 180185100C type PAP 180100 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Plain bearing SF1 180185100C type PAP 180100 P10 - ISB

SF1180185100C
€79.44 (€65.65 tax excl.)
Self-lubricating plain bearing SF1 180x185x100mm PAP P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered.Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications.Reference:...
Cap from friction SF1 190195100C type PAP 190100 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Plain bearing SF1 190195100C type PAP 190100 P10 - ISB

SF1190195100C
€74.49 (€61.56 tax excl.)
Self-lubricating plain bearing SF1 190x195x100mm PAP P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered.Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications.Reference:...
Cap from friction SF1 20020580C type PAP 20080 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Friction cap SF1 20020580C type PAP 20080 P10 - ISB

SF120020580C
€80.34 (€66.40 tax excl.)
Self-lubricating friction cap SF1 200x205x80mm PAP P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered.Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications.Reference:...
Cap from friction SF1 210215100C type PAP 210100 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Plain bearing SF1 210215100C type PAP 210100 P10 - ISB

SF1210215100C
€68.18 (€56.35 tax excl.)
Self-lubricating plain bearing SF1 210x215x100mm PAP P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered.Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications.Reference:...
Cap from friction SF1 220225100C type PAP 220100 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Plain bearing SF1 220225100C type PAP 220100 P10 - ISB

SF1220225100C
€87.73 (€72.50 tax excl.)
Self-lubricating plain bearing SF1 220x225x100mm PAP P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered.Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications.Reference:...
Cap from friction SF1 250255100C type PAP 250100 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Plain bearing SF1 250255100C type PAP 250100 P10 - ISB

SF1250255100C
€97.22 (€80.35 tax excl.)
Self-lubricating plain bearing SF1 250x255x100mm PAP P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered.Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications.Reference:...
Cap from friction SF1 300305100C type PAP 300100 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Plain bearing SF1 300305100C type PAP 300100 P10 - ISB

SF1300305100C
€105.55 (€87.23 tax excl.)
Self-lubricating plain bearing SF1 300x305x100mm PAP P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered.Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications.Reference:...
Cap of friction SF-1F 10090C type PAF 1090 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Walloon plain bearing SF1F 10090C type PAF 1090 P10 - ISB

SF1F10090C
€0.68 (€0.56 tax excl.)
Self-lubricating flange type bushing SF1F 10x12x9mm PAF P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered. Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications....
Cap of friction SF-1F 10120C type PAF 10120 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Walloon plain bearing SF1F 10120C type PAF 10120 P10 - ISB

SF1F10120C
€0.70 (€0.58 tax excl.)
Self-lubricating flange type bushing SF1F 10x12x12mm PAF P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered. Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications....
Cap of friction SF-1F 10170C type PAF 10170 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Walloon plain bearing SF1F 10170C type PAF 10170 P10 - ISB

SF1F10170C
€0.98 (€0.81 tax excl.)
Self-lubricating flange type bushing SF1F 10x12x17mm PAF P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered. Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications....
Cap from friction SF-1F 22115C type PAF 22115 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Walloon plain bearing SF1F 22115C type PAF 22115 P10 - ISB

SF1F22115C
€2.24 (€1.85 tax excl.)
Self-lubricating flange type bushing SF1F 22x25x11.5mm PAF P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered. Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications....
Cap from friction SF-1F 30160C type PAF 30160 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Walloon plain bearing SF1F 30160C type PAF 30160 P10 - ISB

SF1F30160C
€2.82 (€2.33 tax excl.)
Self-lubricating flange type bushing SF1F 30x34x16mm PAF P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered. Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications....
Cap from friction SF-1F 30260C type PAF 30260 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Walloon plain bearing SF1F 30260C type PAF 30260 P10 - ISB

SF1F30260C
€3.03 (€2.50 tax excl.)
Self-lubricating flange type bushing SF1F 30x34x26mm PAF P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered. Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications....
Cap from friction SF-1F 35160C type PAF 35160 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Walloon plain bearing SF1F 35160C type PAF 35160 P10 - ISB

SF1F35160C
€3.00 (€2.48 tax excl.)
Self-lubricating flange type bushing SF1F 35x39x16mm PAF P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered. Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications....
Cap of friction SF-1F 40400C type PAF 40400 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Walloon plain bearing SF1F 40400C type PAF 40400 P10 - ISB

SF1F40400C
€4.24 (€3.50 tax excl.)
Self-lubricating flange type bushing SF1F 40x44x40mm PAF P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered. Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications....
Cap from friction SF-1F 45260C type PAF 45260 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Walloon plain bearing SF1F 45260C type PAF 45260 P10 - ISB

SF1F45260C
€4.24 (€3.50 tax excl.)
Self-lubricating flange type bushing SF1F 45x50x26mm PAF P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered. Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications....
Cap of friction SF-1F 45300C type PAF 45300 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Walloon plain bearing SF1F 45300C type PAF 45300 P10 - ISB

SF1F45300C
€4.24 (€3.50 tax excl.)
Self-lubricating flange type bushing SF1F 45x50x30mm PAF P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered. Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications....
Cap from friction SF-1F 50300C type PAF 50300 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Walloon plain bearing SF1F 50300C type PAF 50300 P10 - ISB

SF1F50300C
€6.28 (€5.19 tax excl.)
Self-lubricating flange type bushing SF1F 50x55x30mm PAF P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered. Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications....
Cap of friction SF-1F 50425C type PAF 50425 P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Walloon plain bearing SF1F 50425C type PAF 50425 P10 - ISB

SF1F50425C
€6.28 (€5.19 tax excl.)
Self-lubricating flange type bushing SF1F 50x55x42.5mm PAF P10, PTFE interior with a sheet steel base on which a thick porous tin/bronze layer is sintered. Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other applications....
Cap of friction SF2 202325C type PAP 2025 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Hollow core bearing SF2 202325C type PAP 2025 P20 - ISB

SF2202325C
€0.98 (€0.81 tax excl.)
SF2 honeycomb bushing 20x23x25mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications that...
Cap from friction SF2 202330C type PAP 2030 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Hollow ball bearing SF2 202330C type PAP 2030 P20 - ISB

SF2202330C
€1.11 (€0.92 tax excl.)
SF2 honeycomb bushing 20x23x30mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications that...
Cap from friction SF2 222520C type PAP 2220 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Grooved plain bearing SF2 222520C type PAP 2220 P20 - ISB

SF2222520C
€0.93 (€0.77 tax excl.)
Honeycombed bushing SF2 22x25x20mm PAP P20 , polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in mining and metallurgy, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications that require...
Cap from friction SF2 252830C type PAP 2530 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Hollow core bearing SF2 252830C type PAP 2530 P20 - ISB

SF2252830C
€1.49 (€1.23 tax excl.)
Honeycomb bearing SF2 25x28x30mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications that...
Cap from friction SF2 353925C type PAP 3525 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Hollow core bearing SF2 353925C type PAP 3525 P20 - ISB

SF2353925C
€1.74 (€1.44 tax excl.)
Honeycomb bushing SF2 35x39x25mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications that...
Cap from friction SF2 404450C type PAP 4050 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Hollow ball bearing SF2 404450C type PAP 4050 P20 - ISB

SF2404450C
€2.88 (€2.38 tax excl.)
SF2 honeycomb bushing 40x44x50mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications that...
Cap from friction SF2 455045C type PAP 4545 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Honeycomb bearing SF2 455045C type PAP 4545 P20 - ISB

SF2455045C
€3.61 (€2.98 tax excl.)
Honeycomb bushing SF2 45x50x45mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications that...
Cap from friction SF2 505520C type PAP 5020 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Grooved plain bearing SF2 505520C type PAP 5020 P20 - ISB

SF2505520C
€4.11 (€3.40 tax excl.)
Honeycombed bushing SF2 50x55x20mm PAP P20 , polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications...
Cap from friction SF2 505540C type PAP 5040 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Grooved plain bearing SF2 505540C type PAP 5040 P20 - ISB

SF2505540C
€3.75 (€3.10 tax excl.)
Honeycomb bushing SF2 50x55x40mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications that...
Cap from friction SF2 505550C type PAP 5050 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Grooved plain bearing SF2 505550C type PAP 5050 P20 - ISB

SF2505550C
€4.46 (€3.69 tax excl.)
Honeycombed bushing SF2 50x55x50mm PAP P20 , polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications...
Cap from friction SF2 556030C type PAP 5530 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Hollow ball bearing SF2 556030C type PAP 5530 P20 - ISB

SF2556030C
€4.28 (€3.54 tax excl.)
SF2 honeycomb bushing 55x60x30mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications that...
Cap from friction SF2 556040C type PAP 5540 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Grooved plain bearing SF2 556040C type PAP 5540 P20 - ISB

SF2556040C
€4.42 (€3.65 tax excl.)
Honeycomb bushing SF2 55x60x40mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications that...
Cap of friction SF2 556050C type PAP 5550 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Hollow ball bearing SF2 556050C type PAP 5550 P20 - ISB

SF2556050C
€5.09 (€4.21 tax excl.)
SF2 honeycomb bushing 55x60x50mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications that...
Cap from friction SF2 556060C type PAP 5560 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Honeycomb bearing SF2 556060C type PAP 5560 P20 - ISB

SF2556060C
€5.84 (€4.83 tax excl.)
Honeycomb bushing SF2 55x60x60mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications that...
Cap from friction SF2 606540C type PAP 6040 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Hollow ball bearing SF2 606540C type PAP 6040 P20 - ISB

SF2606540C
€4.86 (€4.02 tax excl.)
SF2 honeycomb bushing 60x65x40mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications that...
Cap from friction SF2 606550C type PAP 6050 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Hollow ball bearing SF2 606550C type PAP 6050 P20 - ISB

SF2606550C
€5.60 (€4.63 tax excl.)
SF2 honeycomb bushing 60x65x50mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications that...
Cap from friction SF2 606560C type PAP 6060 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Hollow ball bearing SF2 606560C type PAP 6060 P20 - ISB

SF2606560C
€6.88 (€5.69 tax excl.)
SF2 honeycomb bushing 60x65x60mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications that...
Cap from friction SF2 606570C type PAP 6070 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Hollow ball bearing SF2 606570C type PAP 6070 P20 - ISB

SF2606570C
€7.91 (€6.54 tax excl.)
SF2 honeycomb bushing 60x65x70mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications that...
Cap from friction SF2 657030C type PAP 6530 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Honeycomb bearing SF2 657030C type PAP 6530 P20 - ISB

SF2657030C
€4.86 (€4.02 tax excl.)
Honeycomb bushing SF2 65x70x30mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications that...
Cap from friction SF2 657050C type PAP 6550 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Hollow ball bearing SF2 657050C type PAP 6550 P20 - ISB

SF2657050C
€6.45 (€5.33 tax excl.)
SF2 honeycomb bushing 65x70x50mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications that...
Cap from friction SF2 657060C type PAP 6560 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Honeycomb bearing SF2 657060C type PAP 6560 P20 - ISB

SF2657060C
€7.42 (€6.13 tax excl.)
Honeycomb bushing SF2 65x70x60mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications that...
Cap from friction SF2 657070C type PAP 6570 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Honeycomb bearing SF2 657070C type PAP 6570 P20 - ISB

SF2657070C
€8.17 (€6.75 tax excl.)
Honeycomb bushing SF2 65x70x70mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications that...
Cap from friction SF2 707540C type PAP 7040 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Hollow ball bearing SF2 707540C type PAP 7040 P20 - ISB

SF2707540C
€7.24 (€5.98 tax excl.)
SF2 honeycomb bushing 70x75x40mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications that...
Cap from friction SF2 707560C type PAP 7060 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Hollow ball bearing SF2 707560C type PAP 7060 P20 - ISB

SF2707560C
€9.53 (€7.88 tax excl.)
SF2 honeycomb bushing 70x75x60mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications that...
Cap from friction SF2 758040C type PAP 7540 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Honeycomb bearing SF2 758040C type PAP 7540 P20 - ISB

SF2758040C
€7.26 (€6.00 tax excl.)
Honeycomb bushing SF2 75x80x40mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications that...
Cap from friction SF2 758060C type PAP 7560 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Hollow core bearing SF2 758060C type PAP 7560 P20 - ISB

SF2758060C
€8.37 (€6.92 tax excl.)
SF2 honeycomb bushing 75x80x60mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications that...
Cap from friction SF2 808540C type PAP 8040 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Hollow ball bearing SF2 808540C type PAP 8040 P20 - ISB

SF2808540C
€8.89 (€7.35 tax excl.)
SF2 honeycomb bushing 80x85x40mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications that...
Cap from friction SF2 808550C type PAP 8050 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Hollow ball bearing SF2 808550C type PAP 8050 P20 - ISB

SF2808550C
€9.58 (€7.92 tax excl.)
SF2 honeycomb bushing 80x85x50mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications that...
Cap from friction SF2 808560C type PAP 8060 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Hollow ball bearing SF2 808560C type PAP 8060 P20 - ISB

SF2808560C
€10.29 (€8.50 tax excl.)
SF2 honeycomb bushing 80x85x60mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications that...
Cap from friction SF2 8085100C type PAP 80100 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Grooved plain bearing SF2 8085100C type PAP 80100 P20 - ISB

SF28085100C
€15.94 (€13.17 tax excl.)
Honeycomb bushing SF2 80x85x100mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications...
Cap from friction SF2 909540C type PAP 9040 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Grooved plain SF2 bearing 909540C type PAP 9040 P20 - ISB

SF2909540C
€11.77 (€9.73 tax excl.)
Honeycombed bushing SF2 90x95x40mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications...
Cap from friction SF2 909560C type PAP 9060 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Grooved plain bearing SF2 909560C type PAP 9060 P20 - ISB

SF2909560C
€13.08 (€10.81 tax excl.)
Honeycomb bearing SF2 90x95x60mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications that...
Cap from friction SF2 909580C type PAP 9080 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Hollow core bearing SF2 909580C type PAP 9080 P20 - ISB

SF2909580C
€16.43 (€13.58 tax excl.)
Honeycomb bearing SF2 90x95x80mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications that...
Cap from friction SF2 909590C type PAP 9090 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Honeycomb bearing SF2 909590C type PAP 9090 P20 - ISB

SF2909590C
€19.82 (€16.38 tax excl.)
Honeycombed bushing SF2 90x95x90mm PAP P20 , polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications...
Cap from friction SF2 9095100C type PAP 90100 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Grooved plain bearing SF2 9095100C type PAP 90100 P20 - ISB

SF29095100C
€20.57 (€17.00 tax excl.)
Honeycomb bushing SF2 90x95x100mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in mining and metallurgy, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications that require...
Cap from friction SF2 9510060C type PAP 9560 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Honeycomb bearing SF2 9510060C type PAP 9560 P20 - ISB

SF29510060C
€49.43 (€40.85 tax excl.)
Honeycomb bushing SF2 95x100x60mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications...
Cap from friction SF2 10010550C type PAP 10050 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Honeycomb bearing SF2 10010550C type PAP 10050 P20 - ISB

SF210010550C
€15.08 (€12.46 tax excl.)
Honeycomb bushing SF2 100x105x50mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications...
Cap from friction SF2 10010560C type PAP 10060 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Honeycomb bearing SF2 10010560C type PAP 10060 P20 - ISB

SF210010560C
€16.15 (€13.35 tax excl.)
Honeycomb bearing SF2 100x105x60mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications...
Cap from friction SF2 10010590C type PAP 10090 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Honeycomb bearing SF2 10010590C type PAP 10090 P20 - ISB

SF210010590C
€19.69 (€16.27 tax excl.)
Honeycomb bushing SF2 100x105x90mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications...
Cap from friction SF2 11011560C type PAP 11060 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Honeycomb bearing SF2 11011560C type PAP 11060 P20 - ISB

SF211011560C
€23.97 (€19.81 tax excl.)
Honeycomb bearing SF2 110x115x60mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in mining and metallurgy, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications that require...
Cap from friction SF2 12012560C type PAP 12060 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Honeycomb bearing SF2 12012560C type PAP 12060 P20 - ISB

SF212012560C
€47.47 (€39.23 tax excl.)
Honeycomb bearing SF2 120x125x60mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications...
Cap from friction SF2 12513060C type PAP 12560 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Honeycomb bearing SF2 12513060C type PAP 12560 P20 - ISB

SF212513060C
€55.33 (€45.73 tax excl.)
Honeycomb bearing SF2 125x130x60mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated.Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications that...
Cap from friction SF2 150155100C type PAP 150100 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Hollow core bearing SF2 150155100C type PAP 150100 P20 - ISB

SF2150155100C
€63.78 (€52.71 tax excl.)
Honeycomb bearing SF2 150x155x100mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications...
Cap from friction SF2 220225100C type PAP 220100 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Honeycomb bearing SF2 220225100C type PAP 220100 P20 - ISB

SF2220225100C
€87.73 (€72.50 tax excl.)
SF2 honeycomb bushing 220x225x100mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated. Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications...
Cap from friction SF2 280285100C type PAP 280100 P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Honeycomb bearing SF2 280285100C type PAP 280100 P20 - ISB

SF2280285100C
€101.31 (€83.73 tax excl.)
SF2 honeycomb bushing 280x285x100mm PAP P20, polyacetal resin (POM) interior with a sheet steel base on which a thick porous layer of bronze is sintered. The finish of the outer steel frame is copper plated.Used in the mining and metallurgy industries, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications that...
Cap from friction SF2 type PAP P20 - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Honeycomb plain bushing - SF2 707550C type PAP 7050 P20 - P20

SF2707550C
€7.59 (€6.27 tax excl.)
Honeycomb plain SF2 70x75x50mm PAP P20 bearing bushing, polyacetal resin (POM) interior with a steel plate base on which a thick porous bronze layer is sintered. The finish of the outer steel armor is copper-plated. Used in the mining and metallurgy industry, stamping presses, hydroelectric machinery, for cold rolling of steel and many other applications...
Cap of friction SF-1F type PAF P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Flanged plain bearing SF1F 15090C type PAF 1590 P10 - ISB

SF1F15090C
€1.09 (€0.90 tax excl.)
Self-lubricating SF1F 15x17x9mm PAF P10 self-lubricating flanged type friction bushing, PTFE inner with a steel sheet base on which a thick porous tin/bronze layer is sintered.Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many...
Cap of friction SF-1F type PAF P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Flanged plain bearing SF1F 18170C type PAF 1817 P10 - ISB

SF1F18170C
€1.46 (€1.21 tax excl.)
Self-lubricating SF1F 18x20x17mm PAF P10 self-lubricating flanged bushing, PTFE interior with a steel sheet base on which a thick porous tin/bronze layer is sintered.Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other...
Cap of friction SF-1F type PAF P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Flanged plain bearing SF1F 40260C type PAF 40260 P10 - ISB

SF1F40260C
€3.58 (€2.96 tax excl.)
Self-lubricating SF1F 40x44x26mm PAF P10 self-lubricating flanged bushing, PTFE interior with a steel sheet base on which a thick porous tin/bronze layer is sintered.Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other...
Cap of friction SF-1F type PAF P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Friction sleeve flanged SF1F 40160C type PAF 40160 P10 - ISB

SF1F40160C
€3.12 (€2.58 tax excl.)
Self-lubricating SF1F 40x44x16mm PAF P10 self-lubricating flanged bushing, PTFE interior with a steel sheet base on which a thick porous tin/bronze layer is sintered.Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other...
Cap of friction SF-1F type PAF P10 PTFE - ADAJUSA
Friction cap PAP and PAF- P10 and P20

Friction sleeve flanged SF1F 60500C type PAF 60500 P10 - ISB

SF1F60500C
€8.40 (€6.94 tax excl.)
Self-lubricating flanged type friction bushing SF1F 60x65x50mm PAF P10, PTFE interior with a steel sheet base on which a thick porous tin/bronze layer is sintered.Used in hydraulic and mechanical cylinders, hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile machines, printing machines, gymnastic apparatus and many other...
Single row needle roller bearings with ribs without inner ring NK 100 36 TN 100x120x36 ISB - ADAJUSA
Needle roller bearings without inner race ISB

Needle roller bearings NK 100/36 100x120x36 - ISB

NK10036
€97.28 (€80.40 tax excl.)
Single row needle roller bearings (drawn cup needle roller bearing) with ribs and without inner ring, dimensions 100x120x36mm. NK drawn cup needle roller bearings without inner race, drawn cup needle roller and cage assembly and outer ring form a self-retaining unit, used when the shaft can be hardened and ground. Part No.: NK 100/36 Representative...
Needle roller bearings with single row needle roller and cage assemblies without inner ring NK 110 30 TN 110x130x30 ISB - ADAJUS
Needle roller bearings without inner race ISB

Needle roller bearings NK 110/30 110x130x30 - ISB

NK11030
€112.31 (€92.82 tax excl.)
Single row needle roller bearings (drawn cup needle roller bearing) with ribs and without inner ring, dimensions 110x130x30mm. NK drawn cup needle roller bearings without inner race, drawn cup needle roller and cage assembly and outer ring form a self-retaining unit. This bearing is used when the shaft can be hardened and ground. Part No.: NK 110/30...
Needle roller bearings with inner ring and single row NKI ISB | ADAJUSA
Needle roller bearings with inner race ISB

Needle roller bearings with raceway NKI 22/20 22x34x20 - ISB

NKI2220
€17.18 (€14.20 tax excl.)
Needle roller bearings with machined rings. Single row with ribs and with raceway (inner ring) dimensions 22x34x20mm. Needle roller bearings with inner ring are used when the shaft is not manufactured as a bearing raceway. Part no.: NKI 22/20 Representative picture for illustrative purposes, the item supplied will correspond to the specifications shown
Needle roller bearings with inner ring and single row NKI ISB | ADAJUSA
Needle roller bearings with inner race ISB

Needle roller bearings with raceway NKI 30/20 30x45x20 - ISB

NKI3020
€19.44 (€16.07 tax excl.)
Needle roller bearings with machined rings. Single row with ribs and with raceway (inner ring) dimensions 30x45x20mm. Needle roller bearings with inner ring are used when the shaft is not manufactured as a bearing raceway. Part no.: NKI 30/20 Representative picture for illustrative purposes, the item supplied will correspond to the specifications shown
Needle roller bearings with inner ring and single row NKI ISB | ADAJUSA
Needle roller bearings with inner race ISB

Needle roller bearings with raceway NKI 35/30 35x50x30 - ISB

NKI3530
€28.16 (€23.27 tax excl.)
Needle roller bearings with machined rings. Single row with ribs and with raceway (inner ring) dimensions 35x50x30mm. Needle roller bearings with inner ring are used when the shaft is not manufactured as a bearing raceway. Part No.: NKI 35/30 Representative picture for illustrative purposes, the item supplied will correspond to the specifications shown
Needle roller bearings with inner ring and single row NKI ISB | ADAJUSA
Needle roller bearings with inner race ISB

Needle roller bearings with raceway NKI 40/30 40x55x30 - ISB

NKI4030
€31.81 (€26.29 tax excl.)
Needle roller bearings with machined rings. Single row with ribs and with raceway (inner ring) dimensions 40x55x30mm. Needle roller bearings with inner ring are used when the shaft is not manufactured as a bearing raceway. Part No.: NKI 40/30 Representative picture for illustrative purposes, the item supplied will correspond to the specifications shown
Needle roller bearings with inner ring and single row NKI ISB | ADAJUSA
Needle roller bearings with inner race ISB

Needle roller bearings with raceway NKI 45/35 45x62x35 - ISB

NKI4535
€36.43 (€30.11 tax excl.)
Needle roller bearings with machined rings. Single row with ribs and with raceway (inner ring) dimensions 45x62x35mm. Needle roller bearings with inner ring are used when the shaft is not manufactured as a bearing raceway. Part no.: NKI 45/35 Representative picture for illustrative purposes, the item supplied will correspond to the specifications shown
Needle roller bearings with inner ring and single row NKI ISB | ADAJUSA
Needle roller bearings with inner race ISB

Needle roller bearings with raceway NKI 100/30 100x130x30 - ISB

NKI10030
€159.78 (€132.05 tax excl.)
Needle roller bearings with machined rings. Single row with ribs and with raceway (inner ring) dimensions 100x130x30mm. Needle roller bearings with inner ring are used when the shaft is not manufactured as a bearing raceway. Part No.: NKI 100/30 Representative picture for illustrative purposes, the item supplied will correspond to the specifications...
Brackets and tensioners with bearings

Round support with 60mm UCFC212 axle bearing - ISB

UCFC212-ISB
€39.99 (€33.05 tax excl.)
Round cast iron support with UCFC212 inserted bearing for 60mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCFC212  Representative...
Brackets and tensioners with bearings

Round support with 80mm UCFC216 axle bearing - ISB

UCFC216-ISB
€110.17 (€91.05 tax excl.)
Round cast iron support with UCFC216 inserted bearing for 80mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCFC216  Representative...
Aluminum support with steel...
Foot supports with bearings - Light aluminum alloy series

Aluminum support with steel bearing 10mm shaft UP000 - ISB

UP000-ISB
€10.45 (€8.64 tax excl.)
Foot or bridge type support, in aluminum alloy with steel insert bearing UP000, for 10mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference:...
Aluminum support with...
Foot supports with bearings - Light aluminum alloy series

Aluminum support with eccentric bearing in steel shaft 10mm UP000 - ISB

UP000EX-ISB
€11.07 (€9.15 tax excl.)
Foot or bridge type support, in aluminum alloy with steel insert bearing UP000, for 10mm diameter shaft. Self-aligning support with ball bearing inserted with eccentric ring for fixing, sheet metal seal with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UP000...
View
Support with stainless...
Foot supports with bearings - Light aluminum alloy series

Support with stainless steel bearing 10mm shaft UP000 - ISB

UP000INOX-ISB
€28.31 (€23.40 tax excl.)
Foot or bridge type support with UP000 inserted bearing , for 10mm diameter shaft, both elements in stainless steel. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects....
Aluminum support with steel...
Foot supports with bearings - Light aluminum alloy series

Aluminum support with steel bearing 12mm shaft UP001 - ISB

UP001-ISB
€10.49 (€8.67 tax excl.)
Foot or bridge type support, in aluminum alloy with steel insert bearing UP001, for 12mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UP001...
Aluminum support with steel...
Foot supports with bearings - Light aluminum alloy series

Aluminum support with steel bearing 15mm shaft UP002 - ISB

UP002-ISB
€11.07 (€9.15 tax excl.)
Foot or bridge type support, in aluminum alloy with steel insert bearing UP002, for 15mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UP002...
Aluminum support with steel...
Foot supports with bearings - Light aluminum alloy series

Aluminum support with steel bearing 17mm shaft UP003 - ISB

UP003-ISB
€15.11 (€12.49 tax excl.)
Foot or bridge type support, in aluminum alloy with steel insert bearing UP003, for 17mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UP003...
Aluminum support with steel...
Foot supports with bearings - Light aluminum alloy series

Aluminum support with steel bearing 20mm shaft UP004 - ISB

UP004-ISB
€15.86 (€13.11 tax excl.)
Foot or bridge type support, in aluminum alloy with steel insert bearing UP004, for 20mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UP004...
Aluminum support with steel...
Foot supports with bearings - Light aluminum alloy series

Aluminum support with steel bearing 25mm shaft UP005 - ISB

UP005-ISB
€16.67 (€13.78 tax excl.)
Foot or bridge type support, in aluminum alloy with steel insert bearing UP005, for 25mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UP005...
Aluminum support with steel...
Foot supports with bearings - Light aluminum alloy series

Aluminum support with steel bearing 30mm shaft UP006 - ISB

UP006-ISB
€26.29 (€21.73 tax excl.)
Foot or bridge type support, in aluminum alloy with steel insert bearing UP006, for 30mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UP006...
Aluminum support with steel...
Foot supports with bearings - Light aluminum alloy series

Aluminum support with steel bearing 35mm shaft UP007 - ISB

UP007-ISB
€37.29 (€30.82 tax excl.)
Foot or bridge type support, in aluminum alloy with steel insert bearing UP007, for 35mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UP007...
Support with stainless...
Foot supports with bearings - Light aluminum alloy series

Support with stainless steel bearing 12mm shaft UP001 - ISB

UP001INOX-ISB
€33.90 (€28.02 tax excl.)
Foot or bridge type support with UP001 inserted bearing , for 12mm diameter shaft, both elements in stainless steel. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects....
Support with stainless...
Foot supports with bearings - Light aluminum alloy series

Support with stainless steel bearing 15mm shaft UP002 - ISB

UP002INOX-ISB
€38.53 (€31.84 tax excl.)
Foot or bridge type support with UP002 inserted bearing , for 15mm diameter shaft, both elements in stainless steel. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects....
Support with stainless...
Foot supports with bearings - Light aluminum alloy series

Support with stainless steel bearing 17mm shaft UP003 - ISB

UP003INOX-ISB
€46.22 (€38.20 tax excl.)
Foot or bridge type support with UP003 inserted bearing , for 17mm diameter shaft, both elements in stainless steel. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects....
Support with stainless...
Foot supports with bearings - Light aluminum alloy series

Support with stainless steel bearing 20mm shaft UP004 - ISB

UP004INOX-ISB
€56.54 (€46.73 tax excl.)
Foot or bridge type support with UP004 inserted bearing , for 20mm diameter shaft, both elements in stainless steel. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects....
Support with stainless...
Foot supports with bearings - Light aluminum alloy series

Support with stainless steel bearing 25mm shaft UP005 - ISB

UP005INOX-ISB
€69.26 (€57.24 tax excl.)
Foot or bridge type support with UP005 inserted bearing , for 25mm diameter shaft, both elements in stainless steel. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects....
Support with stainless...
Foot supports with bearings - Light aluminum alloy series

Support with stainless steel bearing 30mm shaft UP006 - ISB

UP006INOX-ISB
€91.05 (€75.25 tax excl.)
Foot or bridge type support with UP006 inserted bearing , for 30mm diameter shaft, both elements in stainless steel. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects....
Support with stainless...
Foot supports with bearings - Light aluminum alloy series

Support with stainless steel bearing 35mm shaft UP007 - ISB

UP007INOX-ISB
€143.51 (€118.60 tax excl.)
Foot or bridge type support with UP007 inserted bearing , for 35mm diameter shaft, both elements in stainless steel. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects....
Aluminum support with...
Foot supports with bearings - Light aluminum alloy series

Aluminum support with eccentric bearing in steel shaft 12mm UP001 - ISB

UP001EX-ISB
€11.13 (€9.20 tax excl.)
Foot or bridge type support, in aluminum alloy with steel insert bearing UP001, for 12mm diameter shaft. Self-aligning support with ball bearing inserted with eccentric ring for fixing, sheet metal seal with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UP001 ECCENTRIC...
Aluminum support with...
Foot supports with bearings - Light aluminum alloy series

Aluminum support with eccentric bearing in steel shaft 15mm UP002 - ISB

UP002EX-ISB
€11.72 (€9.69 tax excl.)
Foot or bridge type support, in aluminum alloy with steel insert bearing UP002, for 15mm diameter shaft. Self-aligning support with ball bearing inserted with eccentric ring for fixing, sheet metal seal with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UP002...
Aluminum support with...
Foot supports with bearings - Light aluminum alloy series

Aluminum support with eccentric bearing in steel shaft 17mm UP003 - ISB

UP003EX-ISB
€16.02 (€13.24 tax excl.)
Foot or bridge type support, in aluminum alloy with steel insert bearing UP003, for 17mm diameter shaft. Self-aligning support with ball bearing inserted with eccentric ring for fixing, sheet metal seal with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UP003 ECCENTRIC...
Aluminum support with...
Foot supports with bearings - Light aluminum alloy series

Aluminum support with eccentric bearing in steel shaft 20mm UP004 - ISB

UP004EX-ISB
€16.81 (€13.89 tax excl.)
Foot or bridge type support, in aluminum alloy with steel insert bearing UP004, for 20mm diameter shaft. Self-aligning support with ball bearing inserted with eccentric ring for fixing, sheet metal seal with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UP004...
Aluminum support with...
Foot supports with bearings - Light aluminum alloy series

Aluminum support with eccentric bearing in steel shaft 25mm UP005 - ISB

UP005EX-ISB
€17.48 (€14.45 tax excl.)
Foot or bridge type support, in aluminum alloy with steel insert bearing UP005, for 25mm diameter shaft. Self-aligning support with ball bearing inserted with eccentric ring for fixing, sheet metal seal with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UP005...
Aluminum support with...
Foot supports with bearings - Light aluminum alloy series

Aluminum support with eccentric bearing in steel shaft 30mm UP006 - ISB

UP006EX-ISB
€27.85 (€23.02 tax excl.)
Foot or bridge type support, in aluminum alloy with steel insert bearing UP006, for 30mm diameter shaft. Self-aligning support with ball bearing inserted with eccentric ring for fixing, sheet metal seal with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UP006...
Aluminum support with...
Foot supports with bearings - Light aluminum alloy series

Aluminum support with eccentric bearing in steel shaft 35mm UP007 - ISB

UP007EX-ISB
€39.55 (€32.69 tax excl.)
Foot or bridge type support, in aluminum alloy with steel insert bearing UP007, for 35mm diameter shaft. Self-aligning support with ball bearing inserted with eccentric ring for fixing, sheet metal seal with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UP007 ECCENTRIC...
Oval support in aluminium...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support in aluminium with steel bearing 10mm axis UFL000 - ISB

UFL000-ISB
€7.20 (€5.95 tax excl.)
Oval support, in aluminum alloy with steel insert bearing UFL000, for 10mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL000  ...
Oval support in aluminium...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support in aluminium with eccentric bearing in steel axis 10mm UFL000 - ISB

UFL000EX-ISB
€7.64 (€6.31 tax excl.)
Oval support, in aluminum alloy with steel insert bearing UFL000, for 10mm diameter shaft. Self-aligning support with ball bearing inserted with eccentric ring for fixing, sheet metal seal with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL000 ECCENTRIC  ...
View
Oval support with INOX...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support with INOX bearing 10mm shaft UFL000 - ISB

UFL000INOXISB
€24.01 (€19.84 tax excl.)
Oval support with UFL000 bearing insert, for 10mm diameter shaft, both elements in stainless steel. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL000 INOX  ...
Oval support in aluminium...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support in aluminium with steel bearing 12mm axis UFL001 - ISB

UFL001-ISB
€9.15 (€7.56 tax excl.)
Oval support, in aluminum alloy with steel insert bearing UFL001, for 12mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL001...
Oval support in aluminum...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support in aluminum with steel bearing 15mm axis UFL002 - ISB

UFL002-ISB
€9.20 (€7.60 tax excl.)
Oval support, in aluminum alloy with steel insert bearing UFL002, for 15mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL002...
Oval support in aluminum...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support in aluminum with steel bearing 17mm axis UFL003 - ISB

UFL003-ISB
€9.33 (€7.71 tax excl.)
Oval support, in aluminum alloy with steel insert bearing UFL003, for 17mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL003...
Oval support in aluminium...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support in aluminium with steel bearing 20mm axis UFL004 - ISB

UFL004-ISB
€14.68 (€12.13 tax excl.)
Oval support, in aluminum alloy with steel insert bearing UFL004, for 20mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL004...
Oval support in aluminum...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support in aluminum with steel bearing 25mm axis UFL005 - ISB

UFL005-ISB
€16.24 (€13.42 tax excl.)
Oval support, in aluminum alloy with steel insert bearing UFL005, for 25mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL005...
Oval support in aluminum...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support in aluminum with steel bearing 30mm axis UFL006 - ISB

UFL006-ISB
€18.34 (€15.16 tax excl.)
Oval support, in aluminum alloy with steel insert bearing UFL006, for 30mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL006...
Oval aluminium support with...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval aluminium support with steel bearing 35mm axis UFL007 - ISB

UFL007-ISB
€30.31 (€25.05 tax excl.)
Oval support, in aluminum alloy with steel insert bearing UFL007, for 35mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL007...
Oval support with INOX...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support with INOX bearing 12mm shaft UFL001 - ISB

UFL001INOXISB
€27.67 (€22.87 tax excl.)
Oval support with UFL001 bearing insert, for 12mm diameter shaft, both elements in stainless steel. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL001 INOX...
Oval support with INOX...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support with INOX bearing 15mm shaft UFL002 - ISB

UFL002INOXISB
€30.84 (€25.49 tax excl.)
Oval support with UFL002 bearing insert, for 15mm diameter shaft, both elements in stainless steel. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL002 INOX...
Oval support with INOX...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support with INOX bearing 17mm shaft UFL003 - ISB

UFL003INOXISB
€35.82 (€29.60 tax excl.)
Oval support with UFL003 bearing insert, for 17mm diameter shaft, both elements in stainless steel. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL003 INOX...
Oval support with stainless...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support with stainless steel bearing 20mm shaft UFL004 - ISB

UFL004INOXISB
€44.07 (€36.42 tax excl.)
Oval support with UFL004 bearing insert, for 20mm diameter shaft, both elements in stainless steel. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL004 INOX...
Oval support with INOX...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support with INOX bearing 25mm shaft UFL005 - ISB

UFL005INOXISB
€52.47 (€43.36 tax excl.)
Oval support with UFL005 bearing insert, for 25mm diameter shaft, both elements in stainless steel. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL005 INOX...
Oval support with INOX...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support with INOX bearing 30mm shaft UFL006 - ISB

UFL006INOXISB
€70.26 (€58.07 tax excl.)
Oval support with UFL006 bearing insert, for 30mm diameter shaft, both elements in stainless steel. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL006 INOX  Representative...
Oval support with INOX...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support with INOX bearing 35mm shaft UFL007 - ISB

UFL007INOXISB
€111.78 (€92.38 tax excl.)
Oval support with UFL007 bearing insert, for 35mm diameter shaft, both elements in stainless steel. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL007 INOX...
Oval support in aluminum...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support in aluminum with eccentric bearing in steel axis 12mm UFL001 - ISB

UFL001EX-ISB
€9.60 (€7.93 tax excl.)
Oval support, in aluminum alloy with steel insert bearing UFL001, for 12mm diameter shaft. Self-aligning support with ball bearing inserted with eccentric ring for fixing, sheet metal seal with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL001 ECCENTRIC  Representative image...
Oval support in aluminum...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support in aluminum with eccentric bearing in steel axis 15mm UFL002 - ISB

UFL002EX-ISB
€9.73 (€8.04 tax excl.)
Oval support, in aluminum alloy with steel insert bearing UFL002, for 15mm diameter shaft. Self-aligning support with ball bearing inserted with eccentric ring for fixing, sheet metal seal with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL002 ECCENTRIC  Representative image...
Oval support in aluminum...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support in aluminum with eccentric bearing in steel axis 17mm UFL003 - ISB

UFL003EX-ISB
€9.74 (€8.05 tax excl.)
Oval support, in aluminum alloy with steel insert bearing UFL003, for 17mm diameter shaft. Self-aligning support with ball bearing inserted with eccentric ring for fixing, sheet metal seal with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL003 ECCENTRIC  Representative image...
Oval support in aluminium...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support in aluminium with eccentric bearing in steel axis 20mm UFL004 - ISB

UFL004EX-ISB
€15.43 (€12.75 tax excl.)
Oval support, in aluminum alloy with steel insert bearing UFL004, for 20mm diameter shaft. Self-aligning support with ball bearing inserted with eccentric ring for fixing, sheet metal seal with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL004 ECCENTRIC...
Oval support in aluminum...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support in aluminum with eccentric bearing in steel axis 25mm UFL005 - ISB

UFL005EX-ISB
€17.21 (€14.22 tax excl.)
Oval support, in aluminum alloy with steel insert bearing UFL005, for 25mm diameter shaft. Self-aligning support with ball bearing inserted with eccentric ring for fixing, sheet metal seal with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL005 ECCENTRIC  Representative image...
Oval support in aluminium...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support in aluminium with eccentric bearing in steel axis 30mm UFL006 - ISB

UFL006EX-ISB
€19.47 (€16.09 tax excl.)
Oval support, in aluminum alloy with steel insert bearing UFL006, for 30mm diameter shaft. Self-aligning support with ball bearing inserted with eccentric ring for fixing, sheet metal seal with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL006 ECCENTRIC  Representative image...
Oval support in aluminum...
Oval Bearing Brackets - Lightweight Aluminum Alloy Series

Oval support in aluminum with eccentric bearing in steel axis 35mm UFL007 - ISB

UFL007EX-ISB
€32.14 (€26.56 tax excl.)
Oval support, in aluminum alloy with steel insert bearing UFL007, for 35mm diameter shaft. Self-aligning support with ball bearing inserted with eccentric ring for fixing, sheet metal seal with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UFL007 ECCENTRIC  Representative image...
simple direction axial ball...
simple direction axial ball roller

simple direction axial ball bearing 51100 10x24x9mm - ISB

51100-ISB
€1.94 (€1.60 tax excl.)
simple direction thrust ball bearing with flat housing ring 51100 , dimensions 10x24x9mm, inner diameter 10mm, outer diameter 24mm, width 9mm. These bearings consist of shaft rings, housing rings and ball cage assembly. The bearings are not self-retaining and for this reason the ball cage and bearing rings can be mounted separately, they are particularly...
simple direction axial ball...
simple direction axial ball roller

simple direction axial ball bearing 51101 12x26x9mm - ISB

51101-ISB
€2.21 (€1.83 tax excl.)
simple direction thrust ball bearing with flat housing ring 51101 , dimensions 12x26x9mm, inner diameter 12mm, outer diameter 26mm, width 9mm. These bearings consist of shaft rings, housing rings and ball cage. The bearings are not self-retaining and for this reason the ball cage and bearing rings can be mounted separately, they are particularly suitable...
simple direction axial ball...
simple direction axial ball roller

simple direction axial ball bearing 51102 15x28x9mm - ISB

51102-ISB
€2.24 (€1.85 tax excl.)
simple direction thrust ball bearing with flat housing ring 51102 , dimensions 15x28x9mm, inner diameter 15mm, outer diameter 28mm, width 9mm. These bearings consist of shaft rings, housing rings and ball cage assembly. The bearings are not self-retaining and for this reason the ball cage and bearing rings can be mounted separately, they are particularly...
simple direction axial ball...
simple direction axial ball roller

simple direction axial ball bearing 51103 17x30x9mm - ISB

51103-ISB
€2.58 (€2.13 tax excl.)
simple direction thrust ball bearing with flat housing ring 51103 , dimensions 17x30x9mm, inner diameter 17mm, outer diameter 30mm, width 9mm. These bearings consist of shaft rings, housing rings and ball cage. The bearings are not self-retaining and for this reason the ball cage and bearing rings can be mounted separately, they are particularly suitable...
simple direction axial ball...
simple direction axial ball roller

simple direction axial ball bearing 51409 45x100x39mm - ISB

51409-ISB
€52.15 (€43.10 tax excl.)
simple direction thrust ball bearing with flat housing ring 51409 , dimensions 45x100x39mm, inner diameter 45mm, outer diameter 100mm, width 39mm. These bearings consist of shaft rings, housing rings and ball cage. The bearings are not self-retaining and for this reason the ball cage and bearing rings can be mounted separately, they are particularly...
simple direction axial ball...
simple direction axial ball roller

simple direction axial ball bearing 51411 55x120x48mm - ISB

51411-ISB
€101.70 (€84.05 tax excl.)
simple direction thrust ball bearing with flat housing ring 51411 , dimensions 55x120x48mm, inner diameter 55mm, outer diameter 120mm, width 48mm. These bearings consist of shaft rings, housing rings and ball cage. The bearings are not self-retaining and for this reason the ball cage and bearing rings can be mounted separately, they are particularly...
Showing 1-2743 of 2743 item(s)
Product added to wishlist