Electrical material

1
…
67
68
69
…
118

ECO-VE-PRO control and protection panel Toscano adajusa.es

Dashboards and protection already wired

Control panel and protection 4x32A electric vehicle charging automatic reset...

€547.51 (€452.49 tax excl.)

32A three-phase control and protection panel, for electric vehicle charging point according to diagram 2 of the ITC-BT-52 standard. Equipped with 32A IGA with automatic recloser, class "A" differential and key lock. Degree of protection IP65. This panel is equipped with surge protectors, both transient and permanent. Automatic reset. Part number:...

View

ECO-VE-PRO control and protection panel Toscano adajusa.es

Dashboards and protection already wired

Control panel and protection 4x40A electric vehicle charging automatic reset...

€550.71 (€455.13 tax excl.)

Three-phase 40A control and protection panel, for electric vehicle charging point according to diagram 2 of the ITC-BT-52 standard. Equipped with 40A IGA with automatic recloser, class "A" differential and key lock. Degree of protection IP65. This panel is equipped with surge protectors, both transient and permanent. Automatic reset Part number:...

View

ECO-VE-PRO control and protection panel Toscano adajusa.es

Dashboards and protection already wired

Control panel and protection 4x63A electric vehicle charging automatic reset...

€593.42 (€490.43 tax excl.)

Three-phase 63A control and protection panel, for electric vehicle charging point according to diagram 2 of the ITC-BT-52 standard. Equipped with 63A IGA with automatic recloser, class "A" differential and key lock. Degree of protection IP65. This panel is equipped with surge protectors, both transient and permanent. Automatic reset. Part number:...

View

Crimper for ferrules from 0.5 to 4mm2 ERV4 | ADAJUSA

Crimper for ferrules from 0.5 to 4mm2 ERV4 | ADAJUSA 2

Tools

Crimper for ferrules from 0.5 to 4 mm2

€11.79 (€9.74 tax excl.)

Easy-to-use crimping tool for insulated and uninsulated ferrules, with non-slip PVC grip and clamp made of high-quality steel, suitable for crimping ferrules with wire cross-section from 0.5 to 4 mm2. Rectangular crimping shape. Part No.: ERV4Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

View

Crimper for ferrules from 0.25 to 10mm1 ERVN-10

Crimper for ferrules from 0.25 to 10mm1 ERVN-10 2

Tools

Toe crimper from 0.25 to 10 mm2

€28.45 (€23.51 tax excl.)

Easy-to-use crimping tool for insulated and uninsolated toe caps, with non-slip PVC grip and high-quality steel jaw, suitable for pressing toe caps with cable diameter from 0.25 to 10 mm2. Rectangular crimp shape. Reference: ERVN-10Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Crimper for ferrules from 6 to 16mm2 ERV16 | ADAJUSA

Crimper for ferrules from 6 to 16mm2 ERV16 | ADAJUSA 2

Tools

Crimper for ferrules from 6 to 16 mm2

€15.39 (€12.72 tax excl.)

Easy-to-use crimping tool for insulated and uninsulated ferrules, with non-slip PVC grip and clamp made of high-quality steel, suitable for crimping ferrules with cable cross-section from 6 to 16 mm2. Rectangular crimping shape. Part No.: ERV16Representative image for illustrative purposes, the article supplied will correspond to the specifications...

Crimper for ferrules from 10 to 35mm2 ERV35 | ADAJUSA

Crimper for ferrules from 10 to 35mm2 ERV35 | ADAJUSA 2

Tools

Ferrule crimper from 10 to 35 mm2

€15.39 (€12.72 tax excl.)

Easy-to-use crimping tool for insulated and uninsulated ferrules, with non-slip PVC grip and clamp made of high-quality steel, suitable for crimping ferrules with cable cross-section from 10 to 35 mm2. Rectangular crimping shape. Part No.: ERV35Representative image for illustrative purposes, the article supplied will correspond to the specifications...

Crimper for ferrules from 6 to 16mm2 ERVN-16 | ADAJUSA

Crimper for ferrules from 6 to 16mm2 ERVN-16 | ADAJUSA 2

Tools

Crimper for ferrules from 6 to 16 mm2

€37.67 (€31.13 tax excl.)

Easy-to-handle crimping tool for insulated and non-insulated ferrules, with non-slip PVC handle and high-quality steel jaw, suitable for crimping ferrules with cable sections from 6 to 16 mm 2 . Square crimp shape. Reference: ERVN-16Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Coaxial cable crimper RG 58/59/6 COAX2 | ADAJUSA

Coaxial cable crimper RG 58/59/6 COAX2 | ADAJUSA 2

Tools

Crimper for coaxial cable RG 58/59/6

€15.04 (€12.43 tax excl.)

Easy-to-handle tool for crimping BNC terminals on RG58, RG59 and RG6 type coaxial cable. It has a non-slip PVC handle and a high-quality steel jaw. Hex Crimp Shape Reference: COAX2Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Flat screwdriver VDE 1000V 2.5x0.4x80mm

Flat screwdriver VDE 1000V 2.5x0.4x80mm 2

Tools

Flat screwdriver insulation VDE 1000V 2.5x80mm

€2.29 (€1.89 tax excl.)

Flat screwdriver with VDE 1000V isolation . Measures 2.5x0.4x80mm, magnetized tip and insulated handle. Easy handling thanks to its light weight and ergonomic handle, making it an ideal tool for daily use and various applications. Recommended for electrical work.Reference: SL2.5 Representative image for illustrative purposes, the supplied article will...

View

VDE 1000V screwdriver set | ADAJUSA

VDE 1000V screwdriver set | ADAJUSA 2

Tools

Isolation screwdriver set VDE 1000V

€25.95 (€21.45 tax excl.)

Set of 6 VDE 1000V isolation screwdrivers with magnetized tip and insulated handle. Easy handling thanks to its light weight and ergonomic handle, ideal for daily use. Recommended for electrical work. It includes: 4 flat screwdrivers: 2 Phillips screwdrivers Reference: CSK Representative image for illustrative purposes, the supplied article...

ADAJUSA pole-seeking screwdriver

Tools

Pole-seeking screwdriver 200-250V

€1.23 (€1.02 tax excl.)

Pole-seeking screwdriver for checking voltage in cables and conductors, suitable for detecting voltages between 200 and 250Vac. Metal tip and insulated plastic handle. Reference: 5104Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Terminal crimper for cables from 0.5 to 6mm2

Terminal crimper for cables from 0.5 to 6mm2 2

Tools

Pre-insulated terminal crimper from 0.5 to 6mm2

€14.93 (€12.34 tax excl.)

Crimpadora for insulated faston terminals and similar, with non-slip PVC grip and high quality steel grip, suitable for pressing insulated terminals with cable diameter from 0.5 to 6mm2. Adjustable pressing force. Reference: PR-2Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

View

terminal crimper 6 to 50mm2 PR-3

terminal crimper 6 to 50mm2 PR-3 2

Tools

Terminal crimper copper terminals from 6 to 50 mm2

€37.67 (€31.13 tax excl.)

Swivel head crimping tool for copper terminals, with non-slip PVC handle and high quality steel clamp , suitable for crimping non-insulated terminals with cable cross section from 6 to 50 mm 2 . Adjustable crimping force. Reference: PR-3 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Peelables from 0.08 to 6mm2 BL-STR

Peelables from 0.08 to 6mm2 BL-STR 2

Tools

Cable peeling and cutting tool from 0.08 to 6 mm2

€16.66 (€13.77 tax excl.)

Tool for cutting and peeling cables of section between 0.08 - 6 mm2. It has an ergonomic and non-slip handle for proper handling and precise cable peeling. Reference: BL-STRRepresentative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Peelables from 0.2 to mm2 BL-006

Peelables from 0.2 to mm2 BL-006 2

Tools

Tool for peeling and cutting cables from 0.2 to 6 mm2

€16.94 (€14.00 tax excl.)

Tool for peeling and cutting cables of section between 0.2 - 6 mm2. It has an ergonomic and non-slip handle for proper handling and precise cable peeling. Reference: BL-006Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Star screwdriver VDE 1000V 2x100mm

Star screwdriver VDE 1000V 2x100mm 2

Tools

Isolation phillips screwdriver VDE1000V 2x100mm

€4.38 (€3.62 tax excl.)

Phillips or star screwdriver with VDE 1000V isolation . Measures 2x100mm, magnetized tip and insulated handle. Light weight and ergonomic handle, recommended for electrical work.Reference: PH2 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Star screwdriver VDE 1000V 1x100mm

Star screwdriver VDE 1000V 1x100mm 2

Tools

isolation phillips screwdriver VDE1000V 1x100mm

€3.65 (€3.02 tax excl.)

Phillips or star screwdriver with VDE 1000V isolation . Measures 1x100mm, magnetized tip and insulated handle. Light weight and ergonomic handle, recommended for electrical work.Reference: PH1 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Star screwdriver VDE 1000V 0x75mm

Star screwdriver VDE 1000V 0x75mm 2

Tools

Isolation phillips screwdriver VDE 1000V 0x75mm

€3.15 (€2.60 tax excl.)

Phillips or star screwdriver with VDE 1000V isolation . Measurements 0x75mm, magnetized tip and insulated handle. Light weight and ergonomic handle, recommended for electrical work.Reference: PH0 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Flat screwdriver VDE 1000V 3x0.5x100mm

Flat screwdriver VDE 1000V 3x0.5x100mm 2

Tools

Flat screwdriver VDE insulation 1000V 3x100mm

€1.78 (€1.47 tax excl.)

Destornillador plano con aislamiento VDE 1000V. Medidas 3,0x0,5x100mm, punta magnetizada y mango aislado. Peso ligero y mango ergonómico, recomendado para trabajos eléctricos. Referencia: SL3 Imagen representativa para fines ilustrativos, el artículo suministrado corresponderá a las especificaciones indicadas.

View

Flat screwdriver VDE 1000V 4.0x0.8x100mm

Flat screwdriver VDE 1000V 4.0x0.8x100mm 2

Tools

Flat screwdriver insulation VDE 1000V 4x100mm

€3.56 (€2.94 tax excl.)

Flat screwdriver with VDE 1000V isolation . Measures 4.0x0.8x100mm, magnetized tip and insulated handle. Light weight and ergonomic handle, recommended for electrical work.Reference: SL4 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Flat screwdriver VDE 1000V 5.5x1.0x125mm

Flat screwdriver VDE 1000V 5.5x1.0x125mm 2

Tools

Flat screwdriver insulation VDE 1000V 5.5x125mm

€3.61 (€2.98 tax excl.)

Flat screwdriver with VDE 1000V isolation . Measures 5.5x1.0x125mm, magnetized tip and insulated handle. Light weight and ergonomic handle, recommended for electrical work.Reference: SL5.5 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

5x20mm ski rack terminal

5x20mm ski rack terminal 2

Fuse holder terminals

Fuse holder Terminal 5x20mm

€1.52 (€1.26 tax excl.)

Fuse holder Terminal for mounting on DIN rail. for cable up to 2.5mm and 5x20mm size fuses. Gray. Reference: BORFUS5x20 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

View

Side cover for fuse holder terminal 5x20mm

Fuse holder terminals

Side cover for fuse holder terminal 5x20mm

€0.13 (€0.11 tax excl.)

Side cover or separator for terminal block 5x20mm fuse holder. Ref: Cover with glass fuse 5x20mm Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Showing 1609-1632 of 2828 item(s)

1
…
67
68
69
…
118

Electrical material

Product added to wishlist