Electrical material

1
…
86
87
88
…
146

Control panel and protection ECO-VE-PRO Toscano ADAJUSA

Dashboards and protection already wired

Protection panel 2x20A for electric vehicle recharging automatic reset...

€263.86 (€218.07 tax excl.)

20A single- single-phase control and protection panel, for recharging point for electric vehicles according to scheme 2 of the ITC-BT-52 standard. Equipped with IGA 20A with automatic recloser, class "A" differential and key lock. Degree of protection IP65. This panel is equipped with protectors against overvoltages, both transient and permanent....

Control panel and protection ECO-VE-PRO Toscano ADAJUSA

Dashboards and protection already wired

Protection panel 2x25A for electric vehicle recharging automatic reset...

€266.47 (€220.22 tax excl.)

25A single- single-phase control and protection panel, for recharging point for electric vehicles according to scheme 2 of the ITC-BT-52 standard. Equipped with IGA 25A with automatic recloser, class "A" differential and key lock. Degree of protection IP65. This panel is equipped with protectors against overvoltages, both transient and permanent....

ECO-VE-PRO control and protection panel Toscano adajusa.es

Dashboards and protection already wired

Control panel and protection 4x16A for recharging electric vehicle automatic rearmament...

€536.89 (€443.71 tax excl.)

Control panel and three-phase protection of 16A, for electric vehicle charging point according to scheme 2 of the ITC-BT-52 standard. Equipped with IGA 16A with automatic recloser, class "A" differential and key lock. Degree of protection IP65. This frame is equipped with surge protectors, both transient and permanent. Automatic rearmament. Reference:...

ECO-VE-PRO control and protection panel Toscano adajusa.es

Dashboards and protection already wired

Control panel and protection 4x32A for recharging of electric vehicle automatic...

€547.51 (€452.49 tax excl.)

Control panel and three-phase protection of 32A, for recharging point of electric vehicles according to scheme 2 of the ITC-BT-52 standard. Equipped with IGA 32A with automatic recloser, class "A" differential and key lock. Degree of protection IP65. This frame is equipped with surge protectors, both transient and permanent. Automatic rearmament....

ECO-VE-PRO control and protection panel Toscano adajusa.es

Dashboards and protection already wired

Control panel and protection 4x40A recharging electric vehicle automatic rearmament...

€550.71 (€455.13 tax excl.)

Control panel and three-phase protection of 40A, for electric vehicle charging point according to scheme 2 of the ITC-BT-52 standard. Equipped with IGA 40A with automatic recloser, class "A" differential and key lock. Degree of protection IP65. This frame is equipped with surge protectors, both transient and permanent. Automatic rearmament Reference:...

ECO-VE-PRO control and protection panel Toscano adajusa.es

Dashboards and protection already wired

Control panel and protection 4x63A recharging electric vehicle automatic reset...

€593.42 (€490.43 tax excl.)

Control panel and three-phase protection of 63A, for electric vehicle charging point according to scheme 2 of the ITC-BT-52 standard. Equipped with IGA 63A with automatic recloser, class "A" differential and key lock. Degree of protection IP65. This frame is equipped with surge protectors, both transient and permanent. Automatic rearmament. Reference:...

Crimper for ferrules from 0.5 to 4mm2 ERV4 | ADAJUSA

Crimper for ferrules from 0.5 to 4mm2 ERV4 | ADAJUSA 2

Tools

Crimper for ferrules from 0.5 to 4 mm2

€11.79 (€9.74 tax excl.)

Easy-to-use crimping tool for insulated and uninsulated ferrules, with non-slip PVC grip and clamp made of high-quality steel, suitable for crimping ferrules with wire cross-section from 0.5 to 4 mm2. Rectangular crimping shape. Part No.: ERV4Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Crimper for ferrules from 0.25 to 10mm1 ERVN-10

Crimper for ferrules from 0.25 to 10mm1 ERVN-10 2

Tools

Toe crimper from 0.25 to 10 mm2

€28.45 (€23.51 tax excl.)

Easy-to-use crimping tool for insulated and uninsolated toe caps, with non-slip PVC grip and high-quality steel jaw, suitable for pressing toe caps with cable diameter from 0.25 to 10 mm2. Rectangular crimp shape. Reference: ERVN-10Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Crimper for ferrules from 6 to 16mm2 ERV16 | ADAJUSA

Crimper for ferrules from 6 to 16mm2 ERV16 | ADAJUSA 2

Tools

Crimper for ferrules from 6 to 16 mm2

€15.39 (€12.72 tax excl.)

Easy-to-use crimping tool for insulated and uninsulated ferrules, with non-slip PVC grip and clamp made of high-quality steel, suitable for crimping ferrules with cable cross-section from 6 to 16 mm2. Rectangular crimping shape. Part No.: ERV16Representative image for illustrative purposes, the article supplied will correspond to the specifications...

Crimper for ferrules from 10 to 35mm2 ERV35 | ADAJUSA

Crimper for ferrules from 10 to 35mm2 ERV35 | ADAJUSA 2

Tools

Ferrule crimper from 10 to 35 mm2

€15.39 (€12.72 tax excl.)

Easy-to-use crimping tool for insulated and uninsulated ferrules, with non-slip PVC grip and clamp made of high-quality steel, suitable for crimping ferrules with cable cross-section from 10 to 35 mm2. Rectangular crimping shape. Part No.: ERV35Representative image for illustrative purposes, the article supplied will correspond to the specifications...

Crimper for ferrules from 6 to 16mm2 ERVN-16 | ADAJUSA

Crimper for ferrules from 6 to 16mm2 ERVN-16 | ADAJUSA 2

Tools

Crimper for ferrules from 6 to 16 mm2

€37.67 (€31.13 tax excl.)

Easy-to-handle crimping tool for insulated and non-insulated ferrules, with non-slip PVC handle and high-quality steel jaw, suitable for crimping ferrules with cable sections from 6 to 16 mm 2 . Square crimp shape. Reference: ERVN-16Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Coaxial cable crimper RG 58/59/6 COAX2 | ADAJUSA

Coaxial cable crimper RG 58/59/6 COAX2 | ADAJUSA 2

Tools

Crimper for coaxial cable RG 58/59/6

€15.04 (€12.43 tax excl.)

Easy-to-handle tool for crimping BNC terminals on RG58, RG59 and RG6 type coaxial cable. It has a non-slip PVC handle and a high-quality steel jaw. Hex Crimp Shape Reference: COAX2Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Flat screwdriver VDE 1000V 2.5x0.4x80mm

Flat screwdriver VDE 1000V 2.5x0.4x80mm 2

Tools

Flat screwdriver insulation VDE 1000V 2.5x80mm

€2.29 (€1.89 tax excl.)

Flat screwdriver with VDE 1000V isolation . Measures 2.5x0.4x80mm, magnetized tip and insulated handle. Easy handling thanks to its light weight and ergonomic handle, making it an ideal tool for daily use and various applications. Recommended for electrical work.Reference: SL2.5 Representative image for illustrative purposes, the supplied article will...

VDE 1000V screwdriver set | ADAJUSA

VDE 1000V screwdriver set | ADAJUSA 2

Tools

Isolation screwdriver set VDE 1000V

€25.95 (€21.45 tax excl.)

Set of 6 VDE 1000V isolation screwdrivers with magnetized tip and insulated handle. Easy handling thanks to its light weight and ergonomic handle, ideal for daily use. Recommended for electrical work. It includes: 4 flat screwdrivers: 2 Phillips screwdrivers Reference: CSK Representative image for illustrative purposes, the supplied article...

ADAJUSA pole-seeking screwdriver

Tools

Pole-seeking screwdriver 200-250V

€1.23 (€1.02 tax excl.)

Pole-seeking screwdriver for checking voltage in cables and conductors, suitable for detecting voltages between 200 and 250Vac. Metal tip and insulated plastic handle. Reference: 5104Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Terminal crimper for cables from 0.5 to 6mm2

Terminal crimper for cables from 0.5 to 6mm2 2

Tools

Pre-insulated terminal crimper from 0.5 to 6mm2

€14.93 (€12.34 tax excl.)

Crimpadora for insulated faston terminals and similar, with non-slip PVC grip and high quality steel grip, suitable for pressing insulated terminals with cable diameter from 0.5 to 6mm2. Adjustable pressing force. Reference: PR-2Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

terminal crimper 6 to 50mm2 PR-3

terminal crimper 6 to 50mm2 PR-3 2

Tools

Terminal crimper copper terminals from 6 to 50 mm2

€37.67 (€31.13 tax excl.)

Swivel head crimping tool for copper terminals, with non-slip PVC handle and high quality steel clamp , suitable for crimping non-insulated terminals with cable cross section from 6 to 50 mm 2 . Adjustable crimping force. Reference: PR-3 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Peelables from 0.08 to 6mm2 BL-STR

Peelables from 0.08 to 6mm2 BL-STR 2

Tools

Cable peeling and cutting tool from 0.08 to 6 mm2

€16.66 (€13.77 tax excl.)

Tool for cutting and peeling cables of section between 0.08 - 6 mm2. It has an ergonomic and non-slip handle for proper handling and precise cable peeling. Reference: BL-STRRepresentative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Peelables from 0.2 to mm2 BL-006

Peelables from 0.2 to mm2 BL-006 2

Tools

Tool for peeling and cutting cables from 0.2 to 6 mm2

€16.94 (€14.00 tax excl.)

Tool for peeling and cutting cables of section between 0.2 - 6 mm2. It has an ergonomic and non-slip handle for proper handling and precise cable peeling. Reference: BL-006Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Star screwdriver VDE 1000V 2x100mm

Star screwdriver VDE 1000V 2x100mm 2

Tools

Isolation phillips screwdriver VDE1000V 2x100mm

€4.38 (€3.62 tax excl.)

Phillips or star screwdriver with VDE 1000V isolation . Measures 2x100mm, magnetized tip and insulated handle. Light weight and ergonomic handle, recommended for electrical work.Reference: PH2 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Showing 1721-1740 of 2913 item(s)

1
…
86
87
88
…
146

Electrical material

Product added to wishlist