Brackets and tensioners with bearings

1
…
22
23
24
…
26

Reduced bridge supports with cast bearings

Reduced bridge support 20mm axis UCPA204- ISB

€10.35 (€8.55 tax excl.)

Reduced bridge cast support with UCPA204 inserted bearing for 20mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCPA204 Representative...

Reduced bridge supports with cast bearings

Reduced bridge support 25mm shaft UCPA205- ISB

€10.38 (€8.58 tax excl.)

Reduced bridge cast support with UCPA205 inserted bearing for 25mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCPA205 Representative...

Reduced bridge supports with cast bearings

Reduced bridge support 30mm axis UCPA206- ISB

€12.98 (€10.73 tax excl.)

Reduced bridge cast support with UCPA206 inserted bearing for 30mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCPA206 Representative...

Reduced bridge supports with cast bearings

Reduced bridge support 35mm axis UCPA207- ISB

€15.03 (€12.42 tax excl.)

Reduced bridge cast support with UCPA207 inserted bearing for 35mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCPA207 Representative...

Reduced bridge supports with cast bearings

Reduced bridge support 40mm axis UCPA208- ISB

€19.69 (€16.27 tax excl.)

Reduced bridge cast support with UCPA208 inserted bearing for 40mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCPA208 Representative...

Reduced bridge supports with cast bearings

Reduced bridge support 45mm axis UCPA209- ISB

€19.41 (€16.04 tax excl.)

Reduced bridge cast support with UCPA209 inserted bearing for 45mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCPA209 Representative...

Reduced bridge supports with cast bearings

Reduced bridge support 50mm axis UCPA210- ISB

€25.63 (€21.18 tax excl.)

Reduced bridge cast support with UCPA210 inserted bearing for 50mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCPA210 Representative...

Reduced bridge supports with cast bearings

Reduced bridge support 55mm axis UCPA211- ISB

€31.06 (€25.67 tax excl.)

Reduced bridge cast support with UCPA211 inserted bearing for 55mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCPA211 Representative...

Reduced bridge supports with cast bearings

Reduced bridge support 60mm axis UCPA212- ISB

€38.74 (€32.02 tax excl.)

Reduced bridge cast support with UCPA212 inserted bearing for 60mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCPA212 Representative...

Reduced bridge supports with cast bearings

Reduced bridge support 65mm axle UCPA213- ISB

€53.70 (€44.38 tax excl.)

Reduced bridge cast support with UCPA213 inserted bearing for 65mm diameter shaft, self-aligning support support with ball bearing inserted with prisoners in the inner ring, sheet metal seal equipped with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCPA213 ...

Aluminum support with steel...

Foot supports with bearings - Light aluminum alloy series

Aluminum support with steel bearing 10mm shaft UP000 - ISB

€10.45 (€8.64 tax excl.)

Foot or bridge type support, in aluminum alloy with steel insert bearing UP000, for 10mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference:...

Aluminum support with steel...

Foot supports with bearings - Light aluminum alloy series

Aluminum support with steel bearing 12mm shaft UP001 - ISB

€10.49 (€8.67 tax excl.)

Foot or bridge type support, in aluminum alloy with steel insert bearing UP001, for 12mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UP001...

Aluminum support with steel...

Foot supports with bearings - Light aluminum alloy series

Aluminum support with steel bearing 15mm shaft UP002 - ISB

€11.07 (€9.15 tax excl.)

Foot or bridge type support, in aluminum alloy with steel insert bearing UP002, for 15mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UP002...

Aluminum support with steel...

Foot supports with bearings - Light aluminum alloy series

Aluminum support with steel bearing 17mm shaft UP003 - ISB

€15.11 (€12.49 tax excl.)

Foot or bridge type support, in aluminum alloy with steel insert bearing UP003, for 17mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UP003...

Aluminum support with steel...

Foot supports with bearings - Light aluminum alloy series

Aluminum support with steel bearing 20mm shaft UP004 - ISB

€15.86 (€13.11 tax excl.)

Foot or bridge type support, in aluminum alloy with steel insert bearing UP004, for 20mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UP004...

Aluminum support with steel...

Foot supports with bearings - Light aluminum alloy series

Aluminum support with steel bearing 25mm shaft UP005 - ISB

€16.67 (€13.78 tax excl.)

Foot or bridge type support, in aluminum alloy with steel insert bearing UP005, for 25mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UP005...

Aluminum support with steel...

Foot supports with bearings - Light aluminum alloy series

Aluminum support with steel bearing 30mm shaft UP006 - ISB

€26.29 (€21.73 tax excl.)

Foot or bridge type support, in aluminum alloy with steel insert bearing UP006, for 30mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UP006...

Aluminum support with steel...

Foot supports with bearings - Light aluminum alloy series

Aluminum support with steel bearing 35mm shaft UP007 - ISB

€37.29 (€30.82 tax excl.)

Foot or bridge type support, in aluminum alloy with steel insert bearing UP007, for 35mm diameter shaft. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip made of nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for misalignments. Reference: UP007...

Support with stainless...

Foot supports with bearings - Light aluminum alloy series

Support with stainless steel bearing 10mm shaft UP000 - ISB

€28.31 (€23.40 tax excl.)

Foot or bridge type support with UP000 inserted bearing , for 10mm diameter shaft, both elements in stainless steel. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects....

Support with stainless...

Foot supports with bearings - Light aluminum alloy series

Support with stainless steel bearing 12mm shaft UP001 - ISB

€33.90 (€28.02 tax excl.)

Foot or bridge type support with UP001 inserted bearing , for 12mm diameter shaft, both elements in stainless steel. Self-aligning support with ball bearing inserted with set screws in the inner ring, sheet metal seal fitted with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects....

Showing 441-460 of 506 item(s)

1
…
22
23
24
…
26

Product added to wishlist