End-of-race and position detectors

3-wire PNP magnetic hall sensor with cable and sensor clamp diameter 20 - Metal Work - adajusa.es

3-wire PNP magnetic hall sensor with cable and sensor clamp diameter 20 - Metal Work - adajusa.es 2

Pack

Pneumatic cylinder accessories

Magnetic sensor hall PNP 3 wires cable and clamp 25 - Metal Work

Magnetic sensor, magnetic detector, normally open (NA), with magnetic hall pickup and PNP output, with cable included 3 wires and fixing bracket for cylinders 25 (ISO 6432).Representative image for illustrative purposes, the article supplied shall correspond to the specifications indicated.

Magnetic sensor hall PNP 3-wire M8 connector and sensor clamp diameter 16 - Metal Work - adajusa.es

Magnetic sensor hall PNP 3-wire M8 connector and sensor clamp diameter 16 - Metal Work - adajusa.es 2

Pack

Pneumatic cylinder accessories

Magnetic sensor hall PNP 3 wires M8 connector and clamp 16 - Metal Work

PK-W095394616

€38.05 (€31.45 tax excl.)

Magnetic sensor, magnetic detector, normally open (NA), with hall magnetic capture and PNP output, with M8 connector. and fixing bracket for cylinders 16 (ISO 6432).Representative image for illustrative purposes, the article supplied shall correspond to the specifications indicated.

Magnetic sensor hall PNP 3-wire M8 connector and sensor clamp diameter 20 - Metal Work - adajusa.es

Magnetic sensor hall PNP 3-wire M8 connector and sensor clamp diameter 20 - Metal Work - adajusa.es 2

Pack

Pneumatic cylinder accessories

Magnetic sensor hall PNP 3 wires M8 connector and clamp 20 - Metal Work

PK-W095394620

€38.03 (€31.43 tax excl.)

Magnetic sensor, magnetic detector, normally open (NA), with hall magnetic capture and PNP output, with M8 connector. and fixing bracket for cylinders 20 (ISO 6432).Representative image for illustrative purposes, the article supplied shall correspond to the specifications indicated.

Magnetic sensor hall PNP 3-wire M8 connector and sensor clamp diameter 25 - Metal Work - adajusa.es

Magnetic sensor hall PNP 3-wire M8 connector and sensor clamp diameter 25 - Metal Work - adajusa.es 2

Pack

Pneumatic cylinder accessories

Magnetic sensor hall PNP 3 wires M8 connector and clamp 25 - Metal Work

PK-W095394625

€38.24 (€31.60 tax excl.)

Magnetic sensor, magnetic detector, normally open (NA), with hall magnetic capture and PNP output, with M8 connector. and fixing bracket for cylinders 25 (ISO 6432).Representative image for illustrative purposes, the article supplied shall correspond to the specifications indicated.

Magnetic sensor hall PNP 3-wire M8 ATEX connector and sensor clamp diameter 16 - Metal Work - adajusa.es

Magnetic sensor hall PNP 3-wire M8 ATEX connector and sensor clamp diameter 16 - Metal Work - adajusa.es 2

Pack

Pneumatic cylinder accessories

Magnetic sensor hall PNP 3 wires M8 ATEX connector and clamp 16 - Metal Work

PK-W095A9616

€46.02 (€38.03 tax excl.)

Magnetic sensor, magnetic detector, normally open (NA), with magnetic hall pickup and PNP output, with M8 ATEX connector and mounting bracket for cylinders 16 (ISO 6432).Representative image for illustrative purposes, the article supplied shall correspond to the specifications indicated.

View

Magnetic sensor hall PNP 3-wire connector M8 ATEX and sensor clamp diameter 20 - Metal Work - adajusa.es

Magnetic sensor hall PNP 3-wire connector M8 ATEX and sensor clamp diameter 20 - Metal Work - adajusa.es 2

Pack

Pneumatic cylinder accessories

Magnetic hall sensor PNP 3-wire connector M8 ATEX and clamp 20 - Metal Work

PK-W095A9620

€45.99 (€38.01 tax excl.)

Magnetic sensor, magnetic detector, normally open (NA), with magnetic hall pickup and PNP output, with M8 ATEX connector and mounting bracket for cylinders 20 (ISO 6432).Representative image for illustrative purposes, the article supplied shall correspond to the specifications indicated.

View

Magnetic sensor hall PNP 3-wire M8 ATEX connector and sensor clamp diameter 25 - Metal Work - adajusa.es

Magnetic sensor hall PNP 3-wire M8 ATEX connector and sensor clamp diameter 25 - Metal Work - adajusa.es 2

Pack

Pneumatic cylinder accessories

Magnetic sensor hall PNP 3 wire connector M8 ATEX and clamp 25 - Metal Work

PK-W095A9625

€46.20 (€38.18 tax excl.)

Magnetic sensor, magnetic detector, normally open (NA), with magnetic hall pickup and PNP output, with M8 ATEX connector and mounting bracket for cylinders 25 (ISO 6432).Representative image for illustrative purposes, the article supplied shall correspond to the specifications indicated.

View

Position limiter FFH001 - Giovenzana adajusa

End-of-race and position detectors

Position limiting race finish FFH001 - Giovenzana

FFH001

€91.78 (€75.85 tax excl.)

Position limiter,limit switch, for crane bridges, hoists, lifting systems and industrial systems in general, crossbar and three positions (-90º/0º/90º) with mechanical interlocking. Reference: FFH001 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

End-of-race and position detectors

Limit Switch position limiter FFH003 - Giovenzana

FFH003

€93.73 (€77.46 tax excl.)

Position limiter,limit switch, for crane bridges, hoists, lifting systems and industrial systems in general, crossbars and four positions (0º/90º/180º/ 270º) without mechanical interlocking. Reference: FFH003 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Position Limiter FCR006 - Giovenzana adajusa

End-of-race and position detectors

Limit Switch FCR006 Position Limiter - Giovenzana

FCR006

€124.63 (€103.00 tax excl.)

Position limiter,limit switch, for bridge cranes, hoists, lifting systems and industrial systems in general, crossbar and four positions (0º/90º/180º/ 270º) with mechanical interlocking. For systems with two-speed motors. Reference: FCR006 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

View

Lifting elements - crane bridges - hostas

Scrambled limiter 2 microswitches ratio 1:25 series FGR0

FGR0-0025M-2A

€71.98 (€59.49 tax excl.)

Windshield limiter with 1:25 ratio and 2 micro-exiters, used to control movement in industrial machines, doors, crane bridges..., when it is necessary to measure the movement according to the angle of rotation and / or number of turns of the axle, providing upper, lower and / or intermediate limits. European manufacturing. Reference: FGR0-0025M-2A...

Lifting elements - crane bridges - hostas

Scrambled limiter 4 microswitches ratio 1:25 series FGR0

FGR0-0025M-4A

€78.61 (€64.97 tax excl.)

Limiter with 1:25 ratio and 4 micro-exiters, used to control the movement in industrial machines, doors, crane bridges ..., when it is necessary to measure the movement according to the angle of rotation and / or number of turns of the axis, providing upper, lower and / or intermediate limits. European manufacturing. Reference: FGR0-0025M-4A...

View

Lifting elements - crane bridges - hostas

Scrambled limiter 2 microswitches ratio 1:100 series FGR0

FGR0-0100M-2A

€83.50 (€69.01 tax excl.)

Windshield limiter with 1:100 ratio and 2 micro-switches of output, used to control the movement in industrial machines, doors, crane bridges ..., when it is necessary to measure the movement according to the angle of rotation and / or number of turns of the axis, providing upper, lower and / or intermediate limits. European manufacturing. Reference:...

View

Lifting elements - crane bridges - hostas

Scrambled limiter 4 microswitches ratio 1:75 series FGR0

FGR0-0075M-4A

€99.70 (€82.40 tax excl.)

Limiter with 1:75 ratio and 4 microruptores of output, used to control the movement in industrial machines, doors, crane bridges ..., when it is necessary to measure the movement according to the angle of rotation and / or number of turns of the axis, providing upper, lower and / or intermediate limits. European manufacturing. Reference:...

View

Lifting elements - crane bridges - hostas

Geared limiter 4 microswitches ratio 1:100 series FGR0

FGR0-0100M-4A

€107.18 (€88.58 tax excl.)

Windshield limiter with 1:100 ratio and 4 micro-exiters, used to control movement in industrial machines, doors, crane bridges..., when it is necessary to measure the movement according to the angle of rotation and / or number of turns of the axle, providing upper, lower and / or intermediate limits. European manufacturing. Reference: FGR0-0100M-4A...

View

Pneumatic cylinder accessories

2-wire reed magnetic sensor with 2m cable - Aignep

DT01R2M

€15.49 (€12.80 tax excl.)

Magnetic sensor, magnetic detector, 2-wire "reed" type contacts, operating range 5 - 240V with 2-meter cable included . Valid for mounting on any cylinder with standard "T" type slot , such as ISO cylinders of the Metal Work , Mindman or Aignep brands ( L and X series). Series: SensorsReference: DT01R2M Representative image for illustrative purposes,...

Magnetic sensor reed 2 wires with cable 3m - ADAJUSA

Pneumatic cylinder accessories

Magnetic reed sensor 2 wires with 3m cable

SMT2DA3M

€17.05 (€14.09 tax excl.)

Magnetic sensor, magnetic detector, contacts type "reed" 2-wire, with 5m cable included. Valid for mounting on any cylinder with standard "T" type slot, such as ISO cylinders of the brands Metal Work, Mindman or Aignep.Reference: SMT.2D Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Magnetic sensor reed 2 wire connector M8 - ADAJUSA

Pneumatic cylinder accessories

Magnetic reed sensor 2-wire M8 connector

SMT2C

€23.44 (€19.37 tax excl.)

Magnetic sensor, magnetic detector, contacts 2-wire "reed" type, with 3-pin male M8 connector. This magnetic detector can work with voltages between 5 and 120Vac. Valid for mounting on any cylinder with standard "T" type slot, such as ISO cylinders of the brands Metal Work, Mindman or Aignep. Part number: SMT.2C Representative image for illustrative...

Pneumatic cylinder accessories

PNP 3-wire hall magnetic sensor with 2m cable - Aignep

DT02P2M

€25.39 (€20.98 tax excl.)

Magnetic sensor, magnetic detector, normally open (NO), with hall magnetic pickup and PNP transistor output, with 3-wire cable included, 2m long . Valid for mounting on any cylinder with standard "T" type slot , such as ISO cylinders of the Metal Work , Mindman or Aignep brands (L and X series). Series: SensorsReference: DT02P2M Representative image...

View

Magnetic hall sensor NPN 3 wires with cable - ADAJUSA

Pneumatic cylinder accessories

Magnetic hall sensor NPN 3-wire with cable

SMTEND

€26.92 (€22.25 tax excl.)

Magnetic sensor, magnetic detector, normally open (NO), with magnetic hall sensor and NPN transistor output, with 3-wire cable included. Cable length 3m. Valid for mounting on any cylinder with standard "T" type slot, such as ISO cylinders of the brands Metal Work, Mindman or Aignep. Part number: SMT.END Representative image for illustrative purposes,...

Magnetic sensor hall NPN 3 wire connector M8 - ADAJUSA

Pneumatic cylinder accessories

Magnetic hall sensor NPN 3-wire M8 connector

SMTENC

€35.77 (€29.56 tax excl.)

Magnetic sensor, magnetic detector, normally open (NO), with magnetic hall sensor and NPN transistor output, with 3-pin male M8 connector. Valid for mounting on any cylinder with standard "T" type slot, such as ISO cylinders of the brands Metal Work, Mindman or Aignep. Valid for mounting on ISO cylinders Metal Work, Mindman and Aignep, among...

Open contact spring connection - Giovenzana

Contact elements - Giovenzana

Open contact NA spring connection - Giovenzana

GI-PCW10

€2.15 (€1.78 tax excl.)

Block of no (NA) to be installed in pushbuttons and control of the Giovenzana brand. Contact connection by spring, green color. Reference: PCW10 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Buttons

Closed contact NC spring connection - Giovenzana

GI-PCW01

€2.15 (€1.78 tax excl.)

Block of nc (NC) to be installed in pushbuttons and control of the giovenzana brand. Contact connection by spring, green color. Reference: PCW01 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Buttons

Open contact NA screw connection - Giovenzana

GI-PL004002

€2.37 (€1.96 tax excl.)

Block of no (NA) to be installed in pushbuttons and control of the Giovenzana brand. Contact connection by screw, green color. Reference: PL004002 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Showing 97-120 of 180 item(s)

End-of-race and position detectors

Magnetic sensor hall PNP 3 wires cable and clamp 25 - Metal Work

Magnetic sensor hall PNP 3 wires M8 connector and clamp 16 - Metal Work

Magnetic sensor hall PNP 3 wires M8 connector and clamp 20 - Metal Work

Magnetic sensor hall PNP 3 wires M8 connector and clamp 25 - Metal Work

Magnetic sensor hall PNP 3 wires M8 ATEX connector and clamp 16 - Metal Work

Magnetic hall sensor PNP 3-wire connector M8 ATEX and clamp 20 - Metal Work

Magnetic sensor hall PNP 3 wire connector M8 ATEX and clamp 25 - Metal Work

Position limiting race finish FFH001 - Giovenzana

Limit Switch position limiter FFH003 - Giovenzana

Limit Switch FCR006 Position Limiter - Giovenzana

Scrambled limiter 2 microswitches ratio 1:25 series FGR0

Scrambled limiter 4 microswitches ratio 1:25 series FGR0

Scrambled limiter 2 microswitches ratio 1:100 series FGR0

Scrambled limiter 4 microswitches ratio 1:75 series FGR0

Geared limiter 4 microswitches ratio 1:100 series FGR0

2-wire reed magnetic sensor with 2m cable - Aignep

Magnetic reed sensor 2 wires with 3m cable

Magnetic reed sensor 2-wire M8 connector

PNP 3-wire hall magnetic sensor with 2m cable - Aignep

Magnetic hall sensor NPN 3-wire with cable

Magnetic hall sensor NPN 3-wire M8 connector

Open contact NA spring connection - Giovenzana

Closed contact NC spring connection - Giovenzana

Open contact NA screw connection - Giovenzana

End-of-race and position detectors

Client support

Company information

Your Account

Follow us in our social