Pressure regulator 1/8 technopolymer - Metal Work - ADAJUSA
Pressure regulator 1/8 technopolymer - Metal Work - ADAJUSA

Pressure regulator 1/8 0-12 bar Syntesi series - Metal Work

€31.25 Tax included

€25.83 tax excl.

Pressure regulator of 1/8 regulation 0-12 bar size 1, body in extremely reliable technopolymer and threaded terminals in nickel-plated brass. Allows stability of the output pressure at the preset pressure. Possibility of fixing through side holes. Padlock locking system. European manufacturing.

Reference: 5611R161

pneumatic pressure regulator symbol

metal work logo

 Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

No queries yet, leave the first!
 

1/8 pressure regulator and regulation range 0-12 bar , compact size (SY1), body made of high-resistance technopolymer and nickel-plated brass threaded terminals. Allows output pressure stability at the preset pressure starting from a equal or higher inlet pressure. Possibility of fixing through side holes or square. Padlock locking system.

It admits very diverse types of assembly, with the appropriate accessories.

Note: the pressure gauge is not included in the supply, it must be ordered separately.

Technical characteristics.

  • Manufacturer: Metal Work
  • Reference: 5611R161 - REG SY1 1/8 012
  • Regulator Size: Size 1
  • Threaded connection size: 1/8".
  • Regulation range: 0-12 bar .
  • Maximum inlet pressure: 15 bar .
  • Flow rate at 6.3 bar (0.63 MPa; 91 psi) ∆P 0.5 bar (0.05 MPa; 7 psi) ( Nl/min): 570
  • Flow rate at 6.3 bar (0.63 MPa, 91 psi) ∆P 1 bar (0.1 MPa, 14 psi) (Nl/min): 1200
  • Relieving discharge flow rate, at 6.3 bar (0.63 MPa; 91 psi) (Nl/min): 70
  • Fluid: Air filtering, with or without lubrication.
  • Wall fixing screws: M4x40.
  • Pressure gauge connection: 1/8".
  • temperature at 10 bar ; 1MPa; 145 psi ( °C): 10 ÷ +50
  • Included: Full discharge step by zeroing inlet pressure and lockable knob.
  • Inlet pressure compensation: Included, through balanced valve
  • Flow rate of additional air intakes at 6.3 bar (Nl/min): 500

For other models or sizes consult.

Syntesi regulator dimensions size 1 Metal Work

Synthesis regulator mounting forms

Pressure gauge and mounting accessories not included in the supply or in the price, they must be ordered separately

Material for professional use, install in compliance with the regulations in force at the place of installation.

For more information, you can download the technical sheet by clicking on the "Annexes" tab.

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

You might also like

16 other products in the same category:

Customers who bought this product also bought:

Reviews
Product added to wishlist
Product added to compare.