Circuit regulating valve 1/2 Syntesi Metal Work - ADAJUSA
Circuit regulating valve 1/2 Syntesi Metal Work - ADAJUSA

Circuit regulating valve Size 2 1/2 V3V manual Syntesi - Metal Work

€49.16 Tax included

€40.63 tax excl.

Circuit regulating valve 1/2 size 2, inlet pressure manual version. Device that separates the compressed air circuit from the main supplied air circuit. It is a 3-way valve that relieves the downstream system in the closed position.

Reference: 5624V104

metal work logo

Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

No queries yet, leave the first!
 

Circuit regulating valve size 2, with inlet and outlet size of 1/2" Syntesi group.

It is a 3-way valve that relieves the downstream system in the closed position. This makes it useful for maintenance operations or when the air supply to the machine or to a piece of equipment needs to be shut off.

Characteristic:
  • Manufacturer: Metal Work
  • Reference: 5624V104
  • Threaded drive inlet and outlet: 1/2"
  • Discharge threaded coupling: 1/4"
  • Control type: manual
  • pressure max. manual-pneumatic V3V input and assisted elpn:
      • bar : 13
      • MPa: 1.3
      • psi: 188
  • Pilot pressure for pneumatic and elpn assisted version and elpn input:
      • bar : 3-10
      • MPa: 0.3-1
      • psi: 43-145
  • Flow at 6.3 bar (0.63 MPa, 91 psi) ΔP 0.5 bar (0.05 MPa, 7 psi): Nl/min 3000 - scfm 106
  • Flow rate at 6.3 bar (0.63 MPa; 91 psi) ΔP 1 bar (0.1 MPa; 14 psi): Nl/min 4000 - scfm 141.5
  • Discharge flow at 6.3 bar (0.63 MPa; 91 psi): Nl/min 2000 - scfm 71
  • temperature at 10 bar ; 1MPa; 145psi°: -10÷+50
  • Lockable knob included
  • Fluid: Compressed air or other inert gases
  • Mounting position: In any position
  • Supplementary air intake, for pressure gauge or fitting: 1/4”, front and rear
  • Supplementary air intake flow rate at 6.3 bar Nl/min: 1500
  • (0.63 MPa; 91 psi) ΔP 1 bar (0.1 MPa; 14 psi) scfm: 53
  • Wall fixing screws: Number 2 M5 screws
  • Coil power for electro-pneumatic version W: 12 VDC and 24 VDC = 2W; 24VAC, 110VAC, 220VAC=3.5VA
  • Manual control of the electro-pneumatic versions: Bistable: if horizontal OFF, if vertical ON

Material for professional use, install in compliance with the regulations in force at the place of installation.

For more information, you can download the technical sheet by clicking on the "Annexes" tab.

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

16 other products in the same category:

Reviews
Product added to wishlist
Product added to compare.